OfficeJet 4635: printing avery 8160 labels - correct alignment

Can anyone suggest where/how do I get help with printing labels Avery8160 on my Officejet 4635.  I tried to use Avery templates and other options on the site of Avery, Avery downloaded on Word 2010, using HP Photo Creations with labels Avery, tried to use models of success in the past on this printer, which I have not yet used for the labels.

Everything seems perfect for the labels on the computer with all the editing screen and centered, but when we print the text is not aligned in the location of the label and not all three columns are centered.  I'm lucky if three or six labels on thirty are usable.  It's @# $% & frustrating.  I too lose paper, labels and ink, not to mention my time!  I also tried to use brochure mast as suggested in a post.  That did not help either...

My last 3 in 1 HP printer does very well with the labels - they were child's play.

Hi Trinkie.

We retested printing of labels Avery 8160 with HP Photo Creations and two different printers Officejet and could not reproduce the problem of misalignment. (We used the default device and HP Photo Creations print settings panel.)

To be clear, the options of scaling I mentioned above would be in the control panel of the printer itself, you can reach by clicking on the blue printer settings link on the HP Photo Creations print screen. (This link is between the printer and the paper size in my screenshot of menus.) I think that you have checked that. However, if you have not installed the long drivers for your printer, you will see fewer options. It's a possibility.

It is a long shot, but engineers thought that it would be possible that you are using J8160 stock. It is a format of A4 paper and would produce out misaligned.

Hope this helps,

RocketLife

Tags: HP Printers

Similar Questions

  • HP Photosmart 6520, I'm trying to print Avery 5160 labels.

    HP Photosmart 6520, I'm trying to print Avery 5160 labels.  The spacing is off from the margin of 1 inch on the top which should be 1/2 in.

    Just found solution on this forum.  When you print, click PROPERTIES.  Click NONE to "Print on both sides."

  • HP D7360 print avery inkjet labels 8663. Printer dismisses media is upside down. It is not the case!

    HP Photosmart D7360

    Mac OS X version 10.7.2

    Try to print remove shipping labels. Printer refuses and tells the media is backwards. It is not the case.  When turning on the printer paper print, but the wrong side of media.

    Hello

    I have already heard this with avery paper, I thibnk its caused by the mark on the paper, if I remember correctly a blue logo on the top of the paper. Try this as a test, cover the blue logo with a thin strip of white paper, so stick on or cover it with Type-ex.

  • OfficeJet 4635: print pages in good arrested

    How can I set up my printer to print the first page first, not the last page first? I have an Officejet 4635 all-in-one.

    Hey @luckyjoe,

    Well, after some additional research, you are right, that the page option is not there to change the order of pages. It seems that they have the option taken in 32 Version of the software. I have no explanation for you as to why it was deleted, I apologize for the confusion.

    You can always try and use another driver, but you may lose some other characteristics. Have a look here: How to assign drivers to Print in different Versions of Windows.

    Thanks again,

  • 8610 HP does not print Avery 5160 labels

    I'm trying to print labels Avery 5160 of the word. I get an error on the printer I use the printer of good size. I tried different sizes, but not luck. Any ideas?

    Ok.  You can try a few more things?

    Let's try printing from another program outside of Microsoft Word and see what happens.  Here is a PDF file that you can download / open.

    http://www.onlinelabels.com/printermargins.aspx

    What happens when you try to print the PDF at the link above on the label sheets?

    Also - can you please try changing the 'Labels' media type in the media type settings.  These type of support should be under options when your print dialog box opens.

    Thank you.

  • While an OfficeJet Pro8610: print template to the correct size using an Officejet Pro8610

    When I print a model for sewing, it does not print the right size. Each model has a square inch test and the test square on the printed document shall measure a square inch or model will be wrong. My test of square inches measured five eighths on a thumb. So, the block quilt that I am sewing will not fit. I think I need to change the settings, but I have no idea what, how and where. I'd appreciate any help you can give me. Thank you.

    Hi SR33.

    Thank you for your answer!

    It really looks like some settings need to be changed within your Microsoft Word program. I recommend you look at this post Windows 7: margins by default Word 2007. Otherwise if this does not help, please consider contacting the Support of Microsoft Office.

    Good luck!

  • HP OfficeJet 4635: HP OfficeJet 4635 printing faces of the Photoshop color photos are reddish

    When you print a photo using Adobe Photoshop, the faces are printed reddish and all the color is darker with funny looking lines throughout the picture.  I tried printing HP and Scan Dr.  It is said that everything is fine.

    Yes, I use HP cartridges, ink is 3/4 full, diagnosis always say nothing is wrong.

    I remove the black cartridge, the vertical lines are now gone.  The color is always a little too red.  I'll try to change the coloring in Photoshop.

    Thank you very much for your help!

  • HP Officejet 5745: Print labels Avery 2181 HP 5745

    My old HP 4500 did large Avery 2181 labels.  This new one, HP Officejet 5745, now refuses to do.

    It is written "paper mismatch".  I've been on the internet, HP, Avery and not help.

    Can it be done? Thank you.

    Page 176 of the manual , it says error.

    (1) what software you use to perform this job?

    (2) what operating system do you use?  Win 7 or what?

    (3) what is the actual size of the label?   The label shown here is a non standard food.

    Avery® Mini-feuilles white file folder labels for Laser printers and inkjet 2181, 2/3 "x 3-7/16", Pack of 300

    (4) have you thought about using labels Avery 5366(.666 x 3.4375), but here at a verygood price.

    Do you know that if you have Microsoft Word, there is a free plug-in software component label Avery.

    This software provides simple step-by-step instructions to format and print Avery labels, cards, dividers, badges and more. Works within Microsoft® Word for Windows, making the word even easier to use.

  • HP Officejet 4635 e-all-in-one printer prints multi-page document

    Hello, I have a HP Officejet 4635 e-all-in-one printer and can't print a multiple page document. The printer will print all except the two or three first pages, stopping in the middle of the last page it is printing, and then ejected from the page, usually with the third print top. At this point, I get an error message on my computer screen that says: "cannot print from xxxxdocument. I can go back into the print menu and select the pages that are not print and manually fill the work, but which requires sometimes two or three attempts, that the printer stops again impression after two or three pages.

    My operating system is Windows 8, the printer is connected to my wireless router which is on the same floor, the printer is connected directly to the wall outlet. I met this problem until print 28.0 Firefox, Microsoft Word, and Microsoft Excel. The documents included diagrams, sheets of computing, graphics and text. Oddly enough, I think I'm able to print several pages (of least until 4 on my last attempt) of Microsoft Office Picture Manager.

    I have no page unique impression of difficulties from the browser or any installed program and am able to print from my devices android as well, although I still have to try multiple pages printing app. The problem seems to occur more often if I try to print more than two pages.

    I searched on the Web site, looked through the installation of printer troubleshooting, including the instructions under "step 3: If your printer is connected to your wireless router, but you can't print (or scan). Nothing I've tried has helped him.

    I wish I had a solution to this problem.

    Thank you very much.

    Helen Marie Kennedy

    Have you tried full install driver software?  OJ4630_188.exe

    Exit the: 08-04-2014

  • Print Avery labels

    Is it possible to print on labels specific Avery?

    Hello

    The site of Avery will be models that be downloaded to allow printing on their labels. I have included a link here.

    As a word of caution when you print labels - "do not feed more than once a sheet of labels into the printer. Re-use of a sheet of labels can result in damage to the glue of the label printer. Labels must cover the whole sheet No exposed spaces. »

  • Only half a page to print on Avery 5160 labels.

    Original title: labels Avery 5160

    Why am I getting only half a page of my Avery 5160 labels printed?  When I use the regular computer paper, the entire page is printed.

    Hello

    1. what operating system is installed on your computer?

    2. What is the brand and model of the printer?

    If you use the HP LaserJet printer then you can have a look at this article:
    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=412144&prodTypeId=18972&ObjectID=c00557679

    Check out these links:
    http://www.Avery.com/Avery/en_US/Help-Center/formatting-and-printing-tips/?NS=rank

    http://www.Avery.com/Avery/en_US/Help-Center/product-FAQs/?NS=rank

    Thank you

  • OfficeJet 4635 - cannot print in Windows 8

    I installed the OfficeJet 4635 successfully on my Windows 7 and XP machines by using the wireless network.  I installed on my Windows 8 machine using the full features of hp.com driver, can see the printer but cannot print.  I ran the print and Scan Doctor whenever the error that the driver must be uninstalled and reinstalled.  I finished this process 3 times now.   What else should I try (in addition to resume the printer?)

    Hi RPG_78,

    Welcome to the HP Forums!

    I understand that you can not print in Windows 8.

    I suggest a different manual uninstall. Then use our printer HP install wizard for Windows for a re - install.

    Hope this helps, thank you for posting.

  • Impossible to print via USB using my iMac running 10.6.8 Officejet 4635

    I bought this printer all in one HP Officejet 4635 yesterday and are unable to print via USB.  I have an iMac running OS 10.6.8.  Until I'veI tried all of the suggestions that I could find on these forums (ex: downloaded the latest driver, disconnect/reconnect the power to disconnect/reconnect usb, delete and 'Add PRINTER' again, etc...) The computer does not recognize the printer, but displays "Unable to send print data" after I click on print.  I know that the printer works very well because I was able to send the document directly to his personal email address.   Help, please!

    Hello! Welcome to the @DanLA forums

    I have seen your post about how you can't use your Officejet 4635 with your iMac running 10.6.8. I understand that you have already tried troubleshooting, so please ignore all the steps that you have already tried in the list of my own suggestions below. If you still can not connect then, think of give us a call. I'll leave the details below.

    1. Mac OS X: how to reset the printing system
    2. Repair disk permissions
    3. Restart your Mac
    4. Reinstall the complete driver: 4630 Officejet HP e-All-in-One Printer full feature software and drivers series
    5. Try another USB cable
    6. Look for an update of the Firmware: get the latest Firmware and updates
    7. Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help.

    Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    Good luck!

  • All-in-one HP Officejet 4635: my HP Officejet 4635 all-in-one printer does not print since upgrading to Mac 10.10.1.

    All-in-one HP Officejet 4635 does not print since upgrading to Mac 10.10.1. Any suggestions? Thank you!!!

    Hi brenHP4630,

    You might want to try updating the driver for your specific operating system. You can find the download HERE.

  • HP OfficeJet All In One 4635: HP officejet 4635 does not print

    Bought a new HP Officejet 4635 all-in-one today.  Installation is complete, do not print anything.  Run wireless on Windows 8.1.  The Test results wireless network print, says no problem found.  Unable to print from the internet, word or excel (from Office 365).  Already reinstalled printer twice.  I don't get an error message, the work appears in the queue but then disappears without printing anything.  I don't have Norton or MacAfee.  Help! I already spent all day fighting with it.

    HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning.

    Download and run printing HP and doctor Scan quickly and automatically perform several tasks of troubleshooting.

    When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities.

Maybe you are looking for