Officejet 5610 software will not work

Similar Questions

• Some software will not work on Windows Vista

  Some software will not work on Windows Vista so I need to install Windows XP
  But how to download drivers for devices such as bluetooth, Lan, his...

  Hello

  I put t know what phone you use, but many Toshiba notebook series are delivered and support similar hardware parts.
  You can simply try to test and install the drivers from different series.

  The new Toshiba Bluetooth stack supports Vista and you can install it on all the laptops Toshiba which supports the feature of BT.
  Sometimes, you will get the chip card driver LAN or compatible Sound on the site of manufacture of chips like Intel, realtek, etc.

• A few days ago got new updates of windows since then some software will not work as an assistant to hp

  When I star my computer my icons are more big hp assistant will not work and receive the same updates on and also I can't update mirosoft silverlite says my software is up to date, but I am also told as with silverlite is not there when it is in my programs when I look at

  stuwart,

  Your have the blues of the update, so here's a tool to heal if all goes well.

  This tool is being offered because an inconsistency was found in the store Windows Service that may prevent the installation of future updates, service packs, and software.

• HP 4500 Officejet Scan Setup will not work

  Previously, the HP Officejet 4500 wouldn't install, see http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-4500-Officejet-software-wont-instal...

  The software is finally installed, but now implementing the feature does not work. When I pressed a screen comes up showing the different settings, then I pressed scan settings, and it shows the various parameters of settings, however when I then tried to set up a function such as scanning front instead of the options panel buttons become available a screen with a picture just showing a scanner and a screen that stays for a while and then returned to the hand set up screen, none of the setting in place options for all functions of scan shop ever upward, however the service I tried to set up is now is more turned on and can no longer be in a hurry at all. I am able to do basic digitization with the old my old scanner software but would like to be able to use the options that come with the HP Officejet 4500.

  How to scan functions can be defined upward when this happens?

  Hi CommentToday,

  There is no configuration other than the installation of the printer software to scan a document. If you have the printer installed on your computer, then you should be able to open the solution Center and click on scan to open the scanning application or you can scan using Microsoft Paint.

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• Group Policy to deploy software will not work on a remote site

  I currently have 3 domain controllers in my environment.  2 (DC1 & DC2) are on my main site (Site A) and 1 (DC3) is on my remote site (Site B).
  When the network between Site A and B link is down users who connect remote Site B (locally) do not receive group policies who deploy software.

  "gpresult /R" shows the software deployment strategy is applied, but the software is not installed.

  No errors in the event log.

  The source of these software installs is my DFS that IS accessible on the Site B when the link is down, as NETLOGON and SYSVOL directories.

  All FSMO roles are DC1.  All domain controllers are Windows 2008 R2.

  What I'm missing here?

  Joshua

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• HP OfficeJet Pro 8710: 8710 Officejet Pro Maintence of software will not work

  Brand new Officejet Pro 8710 replacing Officejet Pro 8600.

  Installed all the software (I think) and am connected to my PC via USB Windows 10.

  All functions seem to work fine - scan, copy, fax and print of the PC software.

  When I open the printer software, I can't do maintenance tasks such as printing a page of diagonostics, situation report, alignment and cleaning of the print head. It is said "... impossible to print.

  I discovered I can do these tasks using the EWS in the process line, but not with the PC software.

  How to restore this functionality.

  Thank you.

  Hello @Ru3_Geep, hope you are well!

  Thank you for becoming a member of the HP Forum. It's a place dynamite to get help from the community, to get suggestions and find what has worked for others.

  I see that you are having problems running the HP printer assistant software maintenance. It seems that the problem with the software of the printer. Try the following steps:

  • Unplug the USB cable from the printer.
  • Go to control panel of configuration-programs and feature - select all of the HP Officejet printer entries and uninstall them.
  • Restart your computer.
  • Now, click http://ftp.hp.com/pub/softlib/software13/printers/OJ8710/OJ8710_Basicx64_1881.exe and install the printer drivers.
  • Connect the USB cable until you are prompted in the connection type window.

  These measures should do the trick, let me know the result!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Why Adobe CS2 software will not work with Mac OS Mountain Lion? What should I do?

  Why should I pay more money to upgrade my Adobe software so that it works with Apple Mac OS Lion mountain. What is Adobe wants to rip off every penny out of me in order for me to use there products? Or should I just delete my system Adobe software and forget Adobe and find something else?

  You're blaming the wrong people. It's all 'Fault' Apple to no longer support legacy APIs. In any case, it's a moot point. The computer world is changing rapidly, and it should be clear to everyone that beyond a point former software simply won't be more compatible with most modern operating systems. If you cannot meet this 'death race', then you will have to find alternatives. Anything beyond that is not worth debating or post complaints on.

  Mylenium

• Fingerprint Software will not work after reinstalling

  I've uninstalled and reinstalled the fingerprint, version 3.2.0.341 reader - 20/04/09.  When I try to register a fingerprint, I get the message "Fingerprint Registration: FPApp.exe - cannot locate component" saying "this application has failed to start because css_banner.dll is not found.  Reinstalling the application may fix this problem. »

  I have re-installed, choose the repair, but I still don't have the error.  However, I see css_banner.dll in \Program Files\Lenovo\Client Security Solution.

  How can I solve this problem?

  Update: I uninstalled the 3.2.0.341 version and installed the version 3.2.0.116.  I have the same problem.

  I solved the problem: I had to fix the Security Client Solution.

  I noticed that if I tried to open the Client Security Solution, I had a similar error on css_banner.dll is not present, message followed by a message CSSLauncher.exe has encountered an error and that it would be closing.  So I decided that since the css_banner.dll belongs to Client Security Solution, it was logical to try to reinstall or repair the application.  I downloaded version 8.2 of drivers and software, and it offered a choice of "repair".  After the repair, my request for fingerprint reader worked.  I've updated the fingerprint reader to the new version of the 20/04/09 3.2.0.341 and it seems to work very well.

• OfficeJet Pro L7590 will not work with Windows 8.1

  Hi all

  I tried to install the L7590 Windows 8.1 but did not succeed. The printer was working well on Windows Vista, 7 and 8 before. After the initial problems, I deleted all the software with this printer. I did the following after this step:

  -use the original installation CD (boot CD). I received the message that the OS is not supported

  -use the "OJ_AIO_L7X00_Full_Win_WW_140_408.exe" file downloaded from HP support. There is a missing file, but no details of the reports.

  Who can help? My suggestion is that HP should pick this up, probably because it worked fine under previous operating system.

  Thanks in advance,

  Kees

  Mario,

  I have already downloaded this driver before, but it won't install. It unpacks, but then closes without any error message.

  A new HP 8600 all-in-one works well after initial problems, but I want to have a printer of backup available in case the 8600 malfunction.

  I'll still give it a try, but the other help is welcome.

  Kees

• OfficeJet 4630:4630 will not work with the USB on my Mac air

  I connect my printer to my Mac with a USB cable and the printer is displayed with a yellow mark and "strive" on my computer. When I try to scan something, the printer says I'm not connected to the internet. So I opened the printer Web page and there was nothing I could do, except for the page just telling me there was a mistake with an internet connection.

  Hi @jiabeixi987

  I don't know what causes this yellow exclamation or has no analysis, but I would be happy to help you.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• assistant camera for gateway software will not work

  When I try to open my camera for gateway assistant software, an error message appears reading "driver open webcam fail. Please restart camera or computer. "Ive tried both, repeatedly with the same error message. I bought this computer about 2 months ago, never had a problem with the cam at all until about a week ago. What should I do?

  Hello
  You may need to reinstall the drivers for your webcam.
  Go to the website of Support technique Gateway and download the latest drivers.

• Photosmart C4280: Photosmart Essential 3.5 will not work after the Win 10 update

  The Photosmart Essential suite, which includes the scanning software will not work after the upgrade to Windows 10.   There is no message error that pop up or are listed in the event log.  Printing continues to function properly.    If the s/w is not compatible with Win 10 there the other scanning software free that I can use?

  Hello

  Thank you for using the forum.  Think that you are facing the same problems as others with Win 10 updates.

  Try this solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

   

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• OfficeJet 7310: Officejet 7300 series software will not install on new pc Win 7

  My Officejet 7310 networked HP software will not install on my new Dell Precision Tower 3620 running Windows 7 64 bit.

  Downloaded file is: AIO_CDB_Net_Full_Win_WW_130_141.exe

  * When you run the Setup program, two errors that have occurred having to do with the system who don't not USB capacity or equipment. (There are about 8 USB ports that work, some USB 3.0, any other USB 2.0).

  * Try with disabled firewall doesn't change anything.

  * If I'm running the original printer installation disc, it downloads the new software and I find myself in the same dead end.

  Sitting next to this machine is my (dying) old workstation Dell Precision 390 with Win 7 and operate the HP and related applications very well Solution Center with the same network printer. (The two machines work protection antivirus Malwarebytes'.)

  It sounds crazy!  Any suggestions on how to fix would be greatly appreciated.

  Hello

  Run the Setup program and comlpete extrction process.

  Once the installation dialog box appears to put an end to this window.

  In Windows Explorer, press and type % temp % fall.

  Locate the most recent installation folder, which begins with 7z (e.g. 7z1234s)

  Open the installation folder.

  Rename the file named usbready.exe in usbready1.exe

  Back a levell and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Please let me know the results,

  Shlomi

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• Backward compatible? Can I write software in 2015 SP1 and expect it to work well in 2013 SP1? What are the features will not work?

  I need to set up some labview on my current computer software and run it on another computer in another country in a month. I was told that the computer I will eventually run from abroad Labiew 2013 SP1. I don't have a Labview on my computer today and thought I would setup the same SP1 version ito 2013 compatibility. However, it seems that this is not an option. When I go to download products my options are 2012, 2012 SP1, SP1 for 2014, 2015 and 2015 SP1.

  So what's the best move here? Can I install 2015 SP1 and wait that everything works ok when I go abroad? I guess not. Why 2013 SP1 is not an option for me? Should I see if guys abroad can upgrade to the latest version? What happens if they can't?

  Thank you

  Trevor

  As others said, the best option is to get the same version. If for some reason you cannot really, I suggest you get an older version, because then you can write the code in a newer version and backsave, there are at least two issues that may bite you if you are not well aware of how they work:

  1. If you have used the new features, they will not work in the old code. What you get in fact depends on the specific feature you are using.
  2. When you backsave, I'm sure that LV is a hierarchy save, which means, if you have screws located in the external files that are not vi.lib, it will create copies and you might have a more difficult time sorting out the dependencies.

  This occurs if you are using an older version, because the most recent version will simply open it.