OfficeJet 6500 on Snow Leopard, scanning and fax questions

Similar Questions

• OfficeJet 6500 E710n-z: HP Scan add page

  Using Windows 7 64 bit, OfficeJet 6500 E710n-z, utility scanning HP v 28.0.1315.0

  I need to scan several pages, some pages in size, a few recipes.

  If I start with the ADF, all pages are scanned, the option to add a Page only allows me to continue scanning from the ADF, so the only option is to close the first file and create a second for the things I have to scan from the glass.

  Is there a way I can switch to scan from the glass and add this page in the same file as the pages in the ADF?

  Hello

  Thank you for using the HP forum.

  You can try this software scanning solution:

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  You can 'Save as PDF', start working with the Source as the ADF and then add pages, and then select the source as flat.

  Let us know if it works.

• After the transition from XP to Windows 7, I lost my ability to scan and fax.

  When I go to the interface of the software (on my desktop), instead of being able to set up a scan and save it to a document, I now get a message that my installation of the software is incomplete.  He tells me that I have to connect via USB to complete it, but when I do this it seems to return to the original XP drivers, and I've since upgraded to Windows 7 drivers.  How to get out of this endless loop and recover my ability to scan?  And I already tried using HP diagnostic tools AND tried to remove and reinstall the update downloaded drivers.  Nothing seems to update this software interface on my desktop - the farthest, I get with it is a runtime error.  Any ideas?

  I tried to reinstall again and somehow got beyond the Runtime error (no idea how).  Now, scan and fax are back (yay) but the scan will make only a single page and then it shows a mistake and said it should be stopped.  However, I can deal with that at thispoint.     Thank you!!

• Why hp disables the use of scanning and faxing because of the low level of ink on my photosmart c4385?

  Why hp disables the use of scanning and faxing because of the low level of ink? Printer says print cartridge missing or not detected. Doesn't make sense to me because the ink has absolutely nothing to do with the other functions. Since I bought this all in one I replace ink twice and I only printed about 10 pieces of paper for nine, making these extremely expensive 10 sheets!

  try reseating the cartridges once more & switch off the printer and remove power & other cables connected to the printer & press & hold the power for 20 seconds & then reconnect all cables back & then turn on the pritner & try to use that will solve the problem...

• How to get the scanning and fax utilities works from 2840 printer. Print function works from pc

  I changed my google chrome browser and I finally got my confiquered pc and printer. He is an all-in-one 2840 color laser jet. How do I get the scan and fax utilities to perform?

  It is useful to include the manufacturer and model number.

  What version of Windows you have, including the service pack?

  How the device is connected to your computer (USB, Ethernet, other)?

  Have you installed the software that came with your HP Color LaserJet 2840 AiO printer?

  If not, why?  If you did, what error messages you are seeing?  Please report messages completely, without paraphrasing.

  Start here: HP Color LaserJet 2820 and 2840 AiO products Series - first installation and install

• OfficeJet 6500 e710n-z: scan and Fax no longer works

  Hello

  After working fine for a couple of years, scanner and fax on my Officejet 6500 functions do not work.  The print function is fine.

  Change that recent computer-wise is that I am switched to a Macbook Air (and upgraded to OS Mavericks) Macbook Pro, but all that was on my previous Mac was transferred to my Air of my LaCie support.

  When I try to scan a document, the preview function works fine but when I click on Scan, a small message says "Made scan of selected areas" but no scan is actually performed.

  When I try to send a fax, I can hear the tone on my phone line and the phone rings but the fax does not pick up.  I tried with several known fax numbers and it's always the same.  I almost never receive faxes so I can't say whether or not the receiver function works.

  Can someone advise?

  Thank you very much!

  Hi Super Dave,

  I was able to scan with the Apple Preview (even if Apple Image Capture did not work) so thank you so much for this!

  Any suggestion as to the fax?

  Thanks again!

• Vertical lines in messages scanning and fax on HP 6500 a

  Hello

  I have an Officejet 6500 has everything in one.

  In recent weeks, when I scan a document, the only result I get is in black mode (black vertical lines all over the page).

  If I use the scanning color mode I get all the lines of color on the page.

  Is it a material, problem with the lamp of scanning or something else?

  The machine is around the age of 5 months.

  Someone at - it an idea?

  The same for faxes, the same lines will appear.

  This is the main reason why I guess it's a hardware problem.

  Any comments would be useful...

  Thank you very much

  This could be a hardware problem and maybe also a problem of glass dirty scan.

  * First of all, I would like to try to reset the printer:

  (1) unplug the unit while it is turned

  (2) unplug the other end of the power cord from the wall jack directly

  (3) separate the power cord from the power brick in the middle of the string

  (4) wait a minute

  (5) unit rear cap for a direct decision-making power, not a surge protector.

  If the lines continue, then try the steps in the document for lines/stripes in scans/copy/Fax.  Click here and select the blank copy for troubleshooting option, in this case.  Let me know how it goes.

• OfficeJet J4550 with Snow Leopard - printer does not

  I have recently upgraded to Snow Leopard, and had trouble with scanning on my officejet J4550 until I read the posts on this forum, downloaded the recent update and learned to go to preview or Capture images. Now I can scan, but I cannot print. After sending a job to print, the print queue indicates that the status is "completed" - but the work has never been printed. What should I do?

  Reload the ' bad software (which for pre - 10.6), then uninstall it by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• HP Officejet 6500 E709n prints pink white and sometimes so black printing is selected

  Original title: HP Officejet 6500 E709n series

  Cannot print copies or faxes. Pages come in a pink or white light when you try to copy in black. I did a restore point back a week before it started. Has not fixed the problem.

  Hello

  1. which version of the operating system are you using?

  2 did you do changes on the computer before the show?

  Method 1:

  Try the HP Print and Scan doctor.

  See the following site:

  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03286146.

  Method 2:

  See the following site:

  Printer in Windows problems

  http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows.

  To install the latest drivers, download the utility software to remove the HP software and then install the most recent drivers.

  Step 1:

  Download the utility software on the site mentioned below:

  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3795406#N397.

  Step 2:

  You can download the driver from the below website:

  32 bits:

  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=3795406#N203.

  64 bit:

  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3795406.

  Method 3:

  I suggest you to see the site mentioned below:

  Choose printing options

  http://windows.microsoft.com/en-US/windows7/Choosing-print-options.

  If the problem persists, I'd say you can get a HP support support forums listed below:

  http://h30434.www3.hp.com/t5/Other-Printing-Questions/bd-p/Printing.

• Where are the utilities all-in-one printer OfficeJet 6210 under Snow Leopard?

  After finding how to restore basic functions of etc. scanning for this printer in Snow Leopard 10.6.1, now I want to clean the heads of my cartridges... but I can't find the utilities of the printer that I used to be able to access before Snow Leopard to perform this kind of housekeeping. Where can I find...? Thanks in advance.

  System, Print & Fax preferences.  Select the printer that you want to the service, and then click the button «Options & supplies»  Then choose utility...

• HP Officejet 6500 a how to scan a document with several pages in a single file?

  HP Officejet 6500 a Plus e-All-in-One - E710n

  Windows 7 (64-bit)

  How to scan a document with several pages in a single file?  After each scan, my old printer (psc 2110) asked if I wanted to scan another page.  In the end, I got a PDF with multiple pages.

  This new creates a file for each page, and I can't find a way to create a PDF with multiple pages.

  Hi mpw101,

  You must press the Add/Remove button, to add pages additionla scanned to the existing file. If you do not see this button try decreasing the analysis DPI setting. Let me know if this helps you?

  

• HP Officejet 6500 E709a series will scan but will not print

  I got a HP Officejet 6500 E709a Series for about 4 years now.  After a few months, it seems "loose" the ability to print.  It can scan via the USB of my laptop Toshiba, but won't print documents.  I had it works but has recently done a Windows Update (Win 7) and on the side of the printer to stopped again.  I tried all the options troubleshooting including uninstall of the printer and allowing windows to find and automatically install it but no good.  Then, I made an update of the driver printer full of windows and tried with the latest dirvers HP Officejet 6500 E709a Series, but still not good.  The printer is connected directly to the laptop - without hubs etc. What can I do now?

  Finally got the problem solved thanks to printing HP and doctor Scan to http://support.hp.com/us-en/document/c03275041. Well worth a visit!

• OfficeJet 6500 709 a. Interference by fax.

  When you try to print from PhotoShop Elements, the correct printer shows (Officejet 6500), but the prints are sent to the fax (fax Officejet 6500).  Do I need to disable the fax feature (I don't use it more) or is it a problem with the software PhotoShop?

  Hello TZap,

  I don't know how to disable the fax on the all in one (or if it is still possible).

  However, this link seems to solve the problem you are experiencing. I wonder if the solution can help you as well

  Printing output always goes to fax | Photoshop Elements 9

• Snow Leopard constant and growing repair permissions - 10.6.8

  Our machine Mac Pro (3,1) seems constant is necessary

  (starting to Snow Leopard) repair permissions. I've been using Applejack

  and have an improved version of the Warrior drive.

  It seems maybe she needed about 5 - 6 times to start or restart, but

  So now need after having initialized twice. Please note that I

  replaced the hard drive (this disk is a copy clone) and I have another

  boot drive for Yosemite. Yes, an effort to "future proofing".

  Of course - yes - I try to avoid reloading everything from the beginning.

  Can there be a simple cure?

  Thank you very much.

  Why you repair permissions so often? Repair permissions should never be necessary. We cannot help you if you do not deserve the exact problem you have.

• Complete the features of my printer office pro jet L7780 does not (scan and fax)

  I can not scan and cannot fax.  I have no hp Solution Center to my office jet pro L7780 printer. When I tried to reinstall the software for windows 7-bit, I got an error message stating MSI > MSI_BPD_Scan.  I followed the instructions how to solved the problem by selecting run, and then type MSIexec / register but the file is not found in my system.

  Hi sschocker,

  Have you followed the steps in washing I provided?

  Follow the steps below to check the WIA Service:
  1. type services.msc in run or search and files program
  2. scroll the page up to the WIA Windows Image Acquisition
  3. make sure that the service is running. Click on stop and then restart to ensure
  4 restart the computer
  
  Restart the services of dependencies:
  1. Click Start, in the search box type "services" without the quotes.
  2. scroll down until you see Windows Image Acquisition (WIA).
  3. double click on it and go to the Dependencies tab.
  4-2 services must be listed.
  5. close this window and look for the remote procedure call (RPC).
  6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.
  7. go to hardware detection kernel and Double click.
  8. set the Startup Type to manual and click on apply.
  9. you should be able to start the service by pressing Start.
  10 now, you are done and the Twain Manager must work and gives you is not a mistake. This should solve your problem