HP Officejet 6500 E709a series will scan but will not print

Similar Questions

• OfficeJet 6500 has more will not print black - Solution

  My 6500 has more do not print black even with new cartridges.  There is instruction to Reset to solve this problem for the 6500, but reset instructions do not work on the 6500 has more.

  How to reset the 6500 has more

  Thank you

  I paid $20 to HP for this information.   They said that the secret to getting the Menu support isn't on the web for the 6500 has more printer.

  My printer has stopped printing black, even with a new black ink cartridge.  I've had the printer for the last 4 days guaranteed when this happened.  Was on my second or 3rd Xlarge black cartridge.

  Steps to fix it.

  1. remove the cartridges

  2. remove the cartridge door / carrier, lift the big lever to release him.

  3. clean the contacts of the cartridge with water and cloth.

  4. clean the contacts and all other surfaces on the Cartrdge support with water. mine has all backen up with ink - it filled the sink with black water.

  5 clean the contacts copper this interface for the cartridge door of the printer. . These were covered with of ink too.

  We then conducted cartridge alignment and it 'Fail' printer still does not work.

• HP Officejet 6500 E709a series works only on some machines not shared.

  In my house, I have a "central" computer that I have attached the printer HP Officejet 6500 E709a Series.  It is Windows Vista.  I have 5 other computers in the House running different versions of Windows 7 (Home Premium or Ultimate) and they connect to the server via WiFi.

  The server can print pages to test very well.  Three of the five connect and print correctly.  But the other two - which, of course, are the two who absolutely * must * be able to print - unable to connect.  Different Assistants say they connect, but when I try to print a Test Page, it fails.

  I think it has something to do with the printer drivers installed on the network computers, but I can't find a way to remove these drivers, and then try again.  So, when I remove the printing device, and then add the computer just re-active again, the old drivers after.

  How can I remove the drivers for a fresh install (theoretically)?

  Don't forget... the printer works fine on the computer, to which it is attached.  Tellling so get the installation disc, etc., is the opposite of the useful.

  Thank you

  -Damian

  Thanks for the reply.  It really helped, but it was nice to have an answer.  =*)

  What I finally was this:

  1: I opened the Panel and went to printers.

  2: I removed the printer I tried to install.

  3: I clicked once on another printer.

  4: at the top, near the menu bar are a few other links.  I clicked on the print server properties

  5: a new window will appear.  I click on the tab drivers.

  6: here, I deleted the drivers of the old printer and the drivers for the new printer I tried to install.

  7: some of them wouldn't uninstall.  So I shrugged my shoulders and who agreed.

  8: I saved the changes, and then completely shut down my computer.

  9: I turned on my computer.

  10: I went to this area and checked again.  I tried again to remove the things that he wouldn't let me delete before.  A couple of times it worked.  (If so, I did the closing down / restart the process again).

  11: now, I went back to the Panel and printers.

  12: I clicked on the button Add a new printer.

  13: I followed the steps.

  14: this time, the correct drivers installed and the thing that worked!

  I hope that would help others who get stuck.

  -Damian

• My officejet 6500 710 a will not be printed "printer e-mail address." Still stuck in the phase of 'connection '.

  My officejet 6500 710 a will not be printed "printer e-mail address." Still stuck in the phase of 'connection '.

  HP Pavilion D7, Windows 7, all parameters are good, network connected, all permit

  Hi ashkin1975,

  Please disconnect the power from the back of the printer for 30 seconds.  Plug in and turn on.

  From the front of the printer: configuration > network > network by default.  Now, in the same network menu, run the Wireless Setup Wizard.

• HP Officejet J4680 series: all-in-one HP Officejet J4680 series will not print Word documents

  My HP Officejet J4680 all-in-one ink jet printer will not print in Word 2010 documents. It will print .pdf and Excel 2010 documents. I ran printing HP and doctor Scan and check it and put to date and said all is fine. Just around checking on my computer it said in the devices that the printer is ok. I printed the test from the doctor of Hp Plug and it came out ok. Seems so that Word documents are the only problem. I installed Windows 10 earlier so not totally sure that's the problem I don't remember if I used the word since installation up to now.

  I bought this printer in 2010 and have had no problems with it and I can tell you that I have printed a large NUMBER of pages.

  Any ideas how to get this printer working?

  Thank you!

  Hey @Ric88xx, welcome to the Forums of HP!

  I'd love to help you with your JO J4680. I understand that you are unable to print from Word, but you can print the PDF and Excel. Please use the following article from Microsoft to solve the problem and I would like to know the results of your efforts: How to troubleshoot printing in Word failures.

  If this resolves the issue, please click Accept as Solution button below. If the problem persists, let me know and I will do everything I can to help. Thank you.

• Laser Jet Pro CM1415fnw, can scan, but do not print

  It will not print documents in the queue.
  It will scan very well.
  I ran shoot poorly, but not response.

  I have also a HP Office Jet Pro 8600 in my network and when I designate him, it works very well as a scanner and a printer.

  I ended up going in "start" / devices and printers, right click on the printer icon, then 'see whats printing'. "."
  He says that the printer is "offline".
  I clicked on 'printer', came down to "Printer to use in offline mode" and took the box out of the box.

  My printer is back online and start working.

  Thank you

• LaserJet MFP M127fw Pro: Scanning but does not print: print jobs that are just sitting in the queue

  I tried several fixes and nothing has worked.

  Uninstalling the software and printer and reinstalled from scratch.  Can see and scan, but never leave print jobs queue on the laptop

  HP Print ran and doctor Scan.  Could not get out print job, it becomes its own test in-house printer print

  I use wireless.  I tried as well to turn off wireless and use the wire and still get the same results.

  Hello

  I think you need to delete the queue. For Windows, try it please:

  Hold down the Windows key and press R.
  from the run window, type services.msc and press to enter.
  If the computer asks you to Admin, you have to accept that,
  regarder watch down to the print spooler service, right-click and select Properties
  Click the Stop button,
  Go to C:\Windows\System32\Spool\printers or C:\Windows\System\Spool\printers
  delete the job inside this folder
  restart the machine.

  Kind regards.

• HP officejet 8500 has more will not print black and white because the color cartridge is low

  I have entered the property and set it to 'levels of gray' and 'use black ink only', but the printer still will not print because "the yellow ink cartridge is low.

  incredibly frustrating that the cartridges of color completely stop you from printing, even if you are trying to print in color.

  Proffessional OS-windows 7

  is there a known solution for this?

  Unfortunately, the printer does not print until the replacement of the yellow ink. There is no work around for low ink message.

• OfficeJet 6500 Solution center will not install/help files missing

  Hey community:

  Have tried several times to install Officejet 6500 with the solutioncenter does not.  When I click on the icon to get an error message that the solution center was not installing correctly.  I saw a flash quick a message about the flash player, but on uninstall / installs later may not get the same message.

  All proposals/solutions.  Am disappointed right now with the Hp Printer.  Online tech solution was to place shortcuts to scan ap and says the printer works perfectly like her without the Center as well as the fax, but cannot fax from word doc.

  In addition, I don't have the help files to set up the printer.  Any help on that would be great.

  There could be two questions

  1. your computer does not have a more recent version. Please download and install. Now reinstall the hp software

  2. if above does not work. disable the firewall (including the windows firewall) and check the solution Center.

• HP Officejet 6500 a Plus: black ink cartridge does not print

  I have a HP Officejet 6500 a and have an operating system of Windows 10 on a Dell Inspiron 15R.  The printer does not print any black ink. I have genuine HP cartridges and the black cartridge is about 75% full. It was working properly until this morning. I downloaded your troubleshooting and everything seems fine. I ran the program cleaning head several times, but I can't always get black ink on a page. The other colors are fine. After the second head cleaning, I got a very small black image, but head cleaning has resulted in no black ink. I made sure that the wind had been reached on the cartridge and this problem occurs with wireless and hard wired connections. Time before, it happened and when I replaced the cartridge, it worked. After reading some of the messages on the map, it seems not to be the solution. I also hesitate to throw a cartridge that is only 25% used. Can you help me?

  Hello @robertj138,

• All-in-one printer, HP Officejet Pro 8600 Plus will not print the image in the logo of the company

  I have a Mac the OSX Lion version 10.7.3 (11 d 50) I recently installed this printer. I printed the other documents in color without problem.

  Now, I'm trying to print an invoice with my company logo. The X in the logo is an image that has different shades of blue, but it prints other items on the invoice that are blue. It also correctly print the watermark in blue.

  Any suggestions?

  Thank you for responding!

  It turns out that I had to change my color matching print settings to make it work. I went under correspondence of colors and changed the option provider corresponding to ColorSync.

  This automatically replaced by the profile glossy color Brochure instead of paper simply. It's a shame as this used toner and does not allow you to print a copy of the project.

  I tried a couple of the other profiles, but so far they use as much toner, or does not print the logo. I was subjected to time constraints, so I had to stop experimentation, but once this project is completed, I will try the other profiles to see if they work.

• DeskJet 4535: Printer scans but does not print anything

  I was able to print documents from my PC so my laptop until suddenly now I am only able to scan and print nothing.

  Here are the things I've tried:

  -all types of trobleshoots

  -tried wired (usb) as well as the installation of the network printer, but the same two result

  -hp print scan n doctor

  -removed and added printer many times

  -uninstalled and installed the drivers several times

  -installed universal hp drivers, just in case it might work

  After all the above and many wasted hours yet the problem persists

  After doing print and scan the doctor I am able to print the test page but not able to print any pdf, files etc from any device.

  After a few hours on reseach I tried printing text from Notepad and it PRINTED, but I am not able to print pdf or word files. I even got a printed pdf file Foxit software & also of IE but its does not print from adobe acrobat or word or excel.

  Help, please

  found the solution... I had to run all software as "administor run" mode and it was like... what I did is go in the example of speech software installation folder, that I went to the folder of installation of microsoft and winword.exe found a click with the right button on it and went to Compatibility tab and check the option run in administrator mode. It is printed after that.

• HP Officejet 4620 - black ink will not print.

  I read through the blogs on this and it seems that others have encountered the same problem I'm having.  It is said that my warranty was up in September 2013.  So, I'm not sure where to go from here.  I was hoping someone HP might be able to help me?  I replaced the black cartridge with a genuine HP cartridge and run all the diagnostics.  I really like this printer so, I hope there is a solution to this problem.  Any suggestion would be great.  Thank you!

  Hey, Ciara!  I wanted to just call with you again on this... any other ideas?  I really want to throw this printer, but it is of no use to me now because it will not be printed.  I hope that there is some kind of solution... I really want to buy anothher impression just after more than a year with this one.  Thanks again for your help!

  Amy

• C309a series will not print black on coloured paper

  Can someone help me understand why my photosmart c309a will not be printed in black ink on colored paper?  The ink levels are fine.  If I put the white paper, it prints in black ink very well.  With colored paper, it prints in a strange greenish color.

  You specify a paper type or do you have the book type set to 'automatic '?  The automatic paper type setting can be confused by the color paper. Set the paper type to 'plain paper '.

• OfficeJet 6500 E709a carriage will move to the Middle

  I need solve a printhead error message, which is to get out the ink cartridges.  However, when I opened the cover the cartridge does not move in the middle.  It moves back over the length of the printer and stops on the right side where I can't access cartridges.

  If the transport is stuck to the right, and then try to perform a hard reset.

  * Unplug the unit while the
  Disconnect the other end of the power cord from the wall jack directly
  * Wait 30-60 seconds
  * Plug the unit to the top

  If transport will still not be shared, and then try to perform a partial reset:
  Unplug the unit from power source
  * Press and hold # and 3 on the front panel
  * Plug back and now these buttons.
  * Buttons to exit after the unit starts to turn on
  * Follow the instructions on the screen.

  If the transport is still blocked after the reset, I would recommend looking into get another printer that it has stopped working.