OfficeJet 6500 Wireless e709n, Windows XP, 0x6101bea and 0x610000d error messages

Similar Questions

• All-in-one HP Officejet 6500 has: paper size or the type of error message problem

  I have a HP Officejet 6500 all-in-one a and am running Win 7 on a desktop computer.
  I get a paper mismatch (type and paper size is incorrect) error message.
  The printer is not connected to the internet, but it is connected by a USB cable to the computer.
  I look at the instructions to make an internet connection and they were just too complicated. So I download the update of the firmware and ran to the computer. He would not go beyond the area of printer selection where no printers were found. Clicking Refresh has not helped.
  This update of the firmware seems to have solved the problem for some users, but I need to know how you install it.
  Thanks for your help.

  17/03/2015 #2

  I think I solved the problem. I went to the website to download drivers, etc., and, rather than to specify the printer, I clicked the button to let HP identify it. It came with the correct name (see post) preceding. Then, I downloaded and installed the full feature software and driver. The first attempt to print from Excel led to the mistake of page size, but, on a whim, I tried twice and had two successful prints without error. Until further notice, I mark this as solved problem.

  Thanks for your help,

  LK

• Try to install Windows 8.1 and get error message: boot disk cannot be partitioned

  I am trying to reinstall Windows on my Mac 8.1 and get the message error "boot disk cannot be partitioned or restored to a single partition.  I ran across the 'bugs' usual suggested, that I found online with no luck.  Attached are the screenshots that can help.

  

  

  

  

  How have you managed to get two HDs of recovery on the same disc? You have two versions of OS X installed on this drive in the past?

• OfficeJet 6500 E710n-z: cannot delete printing what, constant error message

  The printer has stopped working since this one file is stuck in Quebec and cannot be deleted.  I tried to restart the print spooler, but which also failed.  I use this on a wireless network with my laptop.  The printer works correctly when it is used with other computers in the House.

  Hi @sez67,

  Try after HP print and Scan Doctor below by selecting the difficulty of printing:

  http://ftp.HP.com/pub/Printers/hppsdr/HPPSdr.exe

  Can see a difference when done the tool?

  If this isn't the case, it returns a specific error?

• Updates to Windows does not and Administrator error Message.

  I had a problem with my windows updates.  It won't work and I get a message that reads: administrator defined strategy than refusing you the right to perform this action.  I am the owner of this computor.  However, he belonged to a leasing company before I buy it.  I created the property with my computer manufacturer.  What should I do?

  Hi Ann K.

  Step: We can try to activate the default Administrator profile.

  http://support.Microsoft.com/default.aspx/KB/555910

  Step 2: Now fix your corrupted user profile

  You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Now connect to your new profile and check if everything is working properly.

  NOTE: Disable the default Administrator account again. Follow the steps in the Article and on this line at the command prompt, type net user administrator / active: No.and then press ENTER. (change the Yes by not)

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Officejet 6500 wireless (CB057A) E709n

  Can the Officejet 6500 wireless to support ethernet connections and wireless at the same time?

  I have correctly configured my printer to work with a wired ethernet connection, but cannot operate wireless. I suspect that it is not possible to use both modes of network at the same time.

  Hello

  Insertion of an ethernet cable disables the wireless radio is not possible, sorry

• could not open windows live messenger and the error code 80040200

  Original title: error code 80040200

  I could not open windows live messenger and the error message I got was... error code 80040200... How can I fix this... Thanks for your help

  Hi NateGoodman,

  When you use Windows Live Messenger and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  Windows Live Messenger

  http://windowslivehelp.com/product.aspx?ProductID=2

  I hope this helps.

• OfficeJet 6500 Wireless, and Windows 7

  While the basic print driver is built into Windows 7, HP has yet to release the complete software for the all-in-one OfficeJet 6500 Wireless.  Exactly when this installation of the complete set of software will be available for Windows 7?

  The full download of features for windows 7 will be available for your product at the end of January 2010.

  While I am an employee of HP, I'm not an expert on all our products. When I offer advice, I do not speak for HP.

• Can't scan on my HP officejet 6500 Wireless after upgrading to Windows 7

  After the upgrade to Windows 7, I can't scan on my HP Officejet 6500 wireless printer.  I can print from my pc using the wireless feature, but I can't access the solutions Center where to access the scan function.

  Since you say that you upgraded to Windows 7, you need to download and install the following hotfix that corrects some problems with the HP AIO devices during the upgrade from Vista to Windows 7.  You can also check this thread, "HP Multifunction printers do not work after upgrading Vista to Windows 7"

• HP OfficeJet 6500 Wireless - bug Scanner driver - only on Windows 7 platform!

  Date:
  October 29, 2010, Roende, Denmark.

  TO:
  Hewlett-Packard
  Support / Department printer driver.

  From:
  Jesper Simonsen
  Denmark.

  Hello Hewlett-Packard

  I have an error message you bringing on the
  HP OfficeJet 6500 Wireless
  Driver for Windows 7 printer platform.

  This bug only exists on the Windows 7 platform
  and not on Windows XP.

  I was hired to install the
  HP OfficeJet 6500 Wireless yesterday.
  I have installation, installed, set up the printer.
  I configured the printer to run
  Wireless network with gateway router
  SSID and WPA key and it went smoothly.
  I installed the printer for
  address fixed LAN IP 192.168.1.197
  and I configured the gateway routers
  DHCP pool to go until 192.168.1.195
  for not to disclose the IP address of the printer.

  On a new laptop Lenovo running Windows XP
  running on the same wireless network that I installed
  software of the printer from Windows XP/Vista driver disk provided.
  It worked fine with functions of printer and scanner.
  I could also press the Scan button the
  the printer front panel and choose the laptop
  and then the printer starts and automatically starts the scanner
  software upward on the laptop. Thus, it works beautifully.

  So I should install the printer on your desktop.
  A new Lenovo desktop computer running Windows 7 32 bit.
  This desktop computer also works on the same wireless network.
  I installed the driver from the disk Windows 7driver to the address provided.
  Installation may well see the printer on the wireless network.
  I might send a print job to the printer.
  But it does not scan.

  I have tried both:

  -To start a computer scan job.

  The scanner respond briefly to run the scanner carriage
  down on where it should begin to start to
  to scan, then it stopped all communication.
  He sits for a while and then finally there will be an error message
  No communication to the scanner, which had the error code:

  4, [(2,7,80040007), (3,7,0)]

  -J' also tried to press the "Scan" button
  on the front panel on the printer and then go through
  options that are displayed on the screen on the front printers.

  It said on the screen before she had no scan options.
  On the computer, it showed a message
  We should update the list of LCD on the screen of the printer.

  I did it with the help of the HP solution center text.
  I found where I could update the scan job type options.
  I could add/remove them. Then, I sent to the printer.
  Analytical work was then on the display of fine printers.
  The same error: Scanner carriage moves down to the other end
  the scanner then stops all communications from there.

  I tried to google the number of problem and error.
  I found several other users with the same problem we had.
  I could see a webpage that people could download
  the latest printer driver, then it should resolve itself.

  The provided disks were
  -Disk with drivers for Windows XP and Vista
  -Disk with drivers for Windows 7 (32 and 64 bit)

  The drive for Windows 7 has been driver version 13.0.0
  and I could download the driver 140.0 version (English)
  (I guess that's v.14.0)

  So I downloaded this driver package.
  (I downloaded it 28 October 2010)

  First of all, I uninstalled all THE HP drivers and software on Windows 7
  and then did a reboot of Windows 7.

  Then I started to install the new version 14 of the pilot.
  The installation went without problems.
  But this driver has the same BUG than the previous driver.

  I went to the new driver HP Web site
  and downloaded all the updates that were available and
  installed to them all and still no luck with the problem of scanning.

  I had Windows Firewall turned off completely all the time.
  It is therefore not the firewall blocking anything.
  The connection to the printer is good because print jobs worked well all the time.

  Then I would try to connect the printer with USB cable
  the computer fixed Lenovo, to see if there was a difference.
  I have re-set up the printer so that I got the printer available
  by USB connection.
  It prints very well and can scan fine if
  I put the computer starting a scan job.

  But if I pressed the "Scan" button on the front panel
  then came the SAME error as before.
  When in the list of type of scan on the front panel of the printer
  has been chosen and then began the cariage scanners
  towards the other end of the scanner.
  Then he started by the scanner to the computer software
  Then, when we pressed either the scanning/Scan now on the front panel
  on the printer OR we pressed the scan button to start the scanner software
  on the computer. Then the scanner stopped after awhile and communication
  then the error message appears again.

  The wireless network is running a
  D - Link router with wireless access point.
  SSID: alsikkevej10 (not hidden, no special characters)
  Encryption: WPA - PSK (WPA1-PSK/TKIP)
  Shared key: xxxxxxxx (with no special characters)

  CONCLUSION:
  This means that the error (bug) persists in HP
  Driver software the feature scanner for Windows 7 platform.

  When I tested it, I had the Windows Firewall turns off completely.
  It's had that nothing blocked in this way.
  Wireless worked well because we could always print.

  The Lenovo laptop could always
  printing AND scanning over the wireless connection

  Both analyze the types of employment has worked on the laptop:
  -A started from the "Scan" button on the front panel of the printer.
  -Started from the scanner on laptop computer software.

  So scan works fine on Windows XP but NOT on Windows 7 platform.

  I would like to hear from you when you have solved the problem,
  so that we can it works as it should do.

  HP, please respond to an e-mail.

  Sincerely,
  Graphics & new media designer

  Jesper Simonsen

  [text removed for privacy]

  I talked to technical support. I mentioned a level 2 technician. He told me that most of these problems is caused by a bad operating system and reinstalling it would do. I got back up, restore the operating system, restore the data and reinstall all my programs, but he was right about the problem to solve. Seems a lot of work to get the scanner to work, but my computer is slow and refreshing it anyway. Moreover, the level 2 technician also said that they would recommend to reinstall the OS every 6 months. Not so sure I want to spend hours 4 or more on this process, but my computer works certainly better!

  jandrgold

• HP Officejet 6500 Wireless all-in-One Printer - E709n does not print

  My HP Officejet 6500 Wireless only all-in-One does not print from my main computer. I can scan from this computer and print them from others. I uninstalled and reinstalled the software and drivers, restarted the queue, run the scan doctor and get error error unknown/deviece.  I have disabled the firewall unplugged abd and repluged the power to the printer.

  Any thoughts?

  I have messed with my firewall and had it work. Still not sure what I did but it resets something. Thanks for the help.

• Cannot receive faxes officejet 6500 wireless

  Hello

  I suddenly have problems to receive faxes. Alone was able to cross over early today, and as I understand it, it took 8 minutes to my fax machine to connect. I get error reports saying type is "received" and result in "error 244 *.» I tried instructions support on the HP site, and those who, unfortunately, were not very useful. One thing, I thought may be useful was turning power switch on the ECM - however, it is not all the instructions to do it on my model!

  I have the HP Officejet 6500 Wireless

  model E709n

  Running Mac OS 10.7.4

  My Fax is on a separate phone line: it's a VOIP line I've had for quite some time

  Any help is greatly appreciated! Thank you!

  Take a look at the link below, you will find a resolution hopefully:

  http://support.HP.com/us-en/document/c01661987

  Let me know if you need additional assistance. I'm here to help. Thank you!

• HP OfficeJet 6500 wireless do not print because there are 2 days, I changed my wireless router

  Original title: print printer print

  My HP OfficeJet 6500 Wireless will not print because 2 days ago, I changed my wireless router. The printer is no longer under warranty and I'm using Windows 7 OS. I have

  Assuming that there is a wireless connection to the printer, the most likely cause of the problem is that the printer is configured to obtain its IP address automatically, and the new router has assigned to the printer an IP address that is different from that which was initially awarded.

  To check if the above is the question:

  Controls on the front panel of the printer allows you to print a Network Setup page:
  From the home screen, press the right arrow, and then select Setup.
  Touch reports, click Network Configuration Page.

  Find the IP address of the printer on the Network Configuration page.

  On your computer, go to devices and printers

  • Right-click on your printer icon, and then select "printer properties".
  • Click the "Ports" tab
  • WITHOUT clicking anywhere in the list of ports other than the right scroll bar, find the line highlighted (the one with the box in the box)
  • Is the 'Port' the same as the IP address of the printer that you noted on the Network Configuration page?
  • Assuming that the port in the printer properties dialog box is not the same as that shown on the Network Configuration page, click the "Configure Port" button and enter the correct IP address in the box "printer name or IP address.
  • OK your way out

  To avoid this problem does not happen, read the User Guide for the your printer and configure the printer to use a static or fixed IP address.  Choose an address that is in the same subnet as the router but outside the range of addresses used by the DHCP server on the router.  You can find this information on the configuration of your router utility.

  For example, most Linksys/Cisco routers use the IP addresses of the form 192.168.1.x and allocate addresses in the range 192.168.1.100 to 192.168.1.150.  In this case, you should take a static IP as 192.168.1.20 (20 is outside the range of 100 to 150).

• How to print on my hp officejet 6500 wireless from my ipad?

  When I try to print with my ipad via airprinter I get a message "No Printers Found AirPrinter", I have a HP officejet 6500 Wireless, what should I do?

  Hi Gynmom,

  I see that you experience problems printing from your iPad to your printer.  I would like to try the following steps.

  1. unplug the printer and the router for a minute.

  2. turn off your iPad.

  3. connect the router to the top.

  4. wait another minute plug printer upward.

  5 turn on iPad.

  6. try to print again.

  Let me know how it goes.

• Scanner does not work on HP Officejet 6500 Wireless with MacBook Pro

  I have the all-in-one Officejet 6500 wireless and print fine but the scanner does not work even after the implementation of suggestions on the Web site.  I recently installed Mac OS x 10.6.8 but I had the same problem with the previous software.  Scan worked fine until the last few months.  I get the message that "HP Scan Pro quit unexpectedly" or "Sorry, an unknown error has occurred", but no additional information.  I have re-installed the software HP twice but to no avail.  What can I do?

  Try the scan using the Image Capture in your Applications folder.  Click your scanner on the left side, click "Show details" on the bottom.