OfficeJet 6700 previous pilot

Similar Questions

• OfficeJet 6700 Premium: Officejet 6700 Premium - Support for direct printing HP (Ad Hoc) wireless

  Please can someone confirm if you can set the to either ad hoc printing or using HP Officejet 6700 Premium Wireless Direct. I can't find anything in the user manual.

  The situation is that a friend has just moved into his own office with a connection high speed standard with a wireless router, in 'Serviced Offices'. These connections allow broadband to the office and he has to pay for a dial-up connection to the internet.

  So he paid for two ethernet connections which probably come out through internet gateway of the complex. However, he lost the ability to print at its 6700 HP that has been previously set up wireless. He tried to install the printer using infrastructure mode by connecting to the network without wire of the complex, but still can not access the printer. It could be that the wireless network is on a different network for LAN connections segment.

  The only solution I can think off is to let each PC with ethernet for Internet connection and install a wireless dongle in each PC to connect to the wireless printer. However, as noted above though I can't find the instructions for the Officejet 6500 to print Ad Hoc has nothing in the manual for the 6700.

  Is this possible?

  Fozzie

  ShlomiL wrote:
  

  Hello

  To clarify, the printer will support HP Wireless direct however with its latest firmware installed.

• HP Officejet 6700: HP Officejet 6700 Premium all in one network problems

  Printer = printer HP e-all-in-one Officejet 6700 Premium
  Model = H711n
  Number of product = CN538A
  Firmware version = MPM5CN1450AR
  Location = Ireland
  Printed pages total: 152
  Scanned pages: 58

  Other details available on request...

  I've had this printer for several months now, I have had no problem connecting to my wireless network and connect computers, telephones and other equipment to this.

  A few days earlier, when starting the printer display flashes with the useless error message, error in the printer, turn the printer off and back on.

  I have power cycled as requested and received the same message, over the power of the cycle he mentions turning off the power button and no DISCONNECT of the sector. Until then I had never disconnected from the sector. After that I have several attempts to power cycle the printer is off and removed the sector, has waited half an hour and powered on again once.

  Still stuck in a loop. He also briefly flashed a blue screen with the error B81431CB. So brief that it is almost useless. I had the boot sequence video and pause playback to read error!

  After some research, I decided that she was experiencing problems connecting to the WIFI network. So, I turned the wifi on the router and the printer network started as usual. Internal menus are now available and I can print status and so forth, so at this point I can exclude defects of ink or mechanism.

  I went in on the printer network settings and reset the network. I'll also through the printer to factory default settings. I have reactivated the WIFI network to the router then went to install the printer again. Digitized for wifi networks and found mine. Entered the password for wifi and the printer could not connect. Everything is good, correct ssid, signal. Report shows wifi password is incorrect.

  I have try several times to connect wifi password is certainly correct, but the printer refuses to recognize the correct password. I tried a different router, the same result. Says incorrect password. Also I tried WPS and a PIN, said still fails to connect.

  At this point, I have disabled all security on the wifi network. Bingo, printer connects to the network, but starts with the loop of error mentioned at the start of the tour and turn it back on. This above has been tried several times, the factory reset, everything ok, turn off the wifi security, the printer connects and goes in a loop.

  So, at this point wifi is confirmed to be defective. I decide to directly connect a LAN cable. Once the LAN cable is connected, a few seconds later the printer detects the network and goes back into its loop error. It will not just connect to a network via wifi or LAN. He previously worked on the network, and nothing has changed on the network, not new parameters or no new devices.

  I connected a laptop to the printer via USB and that seems to work ok, but a USB connection is not ideal and defeated the convenience of a wireless printer. I also tried to reflash the printer in case there is a corruption of the firmware, but the utility detects that the latest firmware is installed and that it is not engaged.

  Now...?

  OK I managed to make it work and I will try to explain the steps of my best.

  As mentioned previously, I tried another router, I tried the wiring, and I tried to reset the router and the printer. Nothing seemed to work.

  Out of curiosity I just put my phone in a WIFI AP. Tried connecting the printer and it worked. The printer connected to the WIFI phones.

  So I know that the printer works on at least one access point.

  Thus, in the settings of the router and firewall. The only thing enabled in the firewall have been

  IPv4 firewall protection

• OfficeJet 6700 Premium: after Windows 10 Upgrade on Officejet 6700 scanning does not work anymore - can not find scanner

  Hello

  Having finally decided to take the plunge to upgrade to Windows 10, I discovered that my Officejet 6700 Premium previously peripheral work will scan is no longer.

  My connection to the device is via a wired connection with a static IP address on the printer. It all worked perfectly under Windows 7, but now, I can only print to the printer to win 10.

  I tried to uninstall the previously working software (under Win 7) and downloaded the latest version of the HP (OJ6700_1315 - 1.exe) software, which BTW is not a patch on the previous software that I'm used to using - but it did not help. Still no joy with the scanning feature.

  I tried to uninstall all software, so I tried to launch the Wizard installation HP which seemed to re - install the last set of software (as above) with the same results - I can print it, but if I try to scan using the Officejet 6700 App it appears a dialog box saying "inaccessible Scanner. Scanner communication cannot be established. Make sure that your product is powered, check the connection and esnure that your network runs correctly. ...".  Amazing result given that the application displays all levels of printer ink, and I can print - every time!

  I tried disabling the firewall - no difference, still do not see the scanner.

  Tried using other windows applications; Paint, etc. - no joy.

  I also tried the "HP Print Scan doctor and" nothing does - even, he gives up and says to contact HP support, with no details about what to tell them!

  I hope someone else out there could have had the same problem and found a way to make it work?

  Thank you!

  Ok

  In case anyone is interested, I bit the bullet and did a new install of Windows 10 on a formatted drive. I then installed the same software that I had tried on the "upgrade to Windows 7" windows, 10, and everything works as expected.

  Therefore, there is definitely something wrong with the upgrade process, and the removal of the HP scanning software & resettlement never did his job correctly.

  I look closely at the list of DLLs etc., charged by the printing software, but could not detect anything immediate.

  Then, certainly in my case, a new facility was to solve this problem.

  See you soon,.

  Dazz

• install the software for hp officejet 6700 premium

  I have a new hp officejet 6700, I can't get the software to install on my win xp computers. all I get is an html element that is not compiled. It fits perfectly on my laptop running win 8.1. I have tried to download the latest version, but still get the same result. what I am doing wrong?

  Thanks for calrifying.

  Please try the patch in the included link in my previous post on your PC under Windows XP, the document should address the issue you describe following...

  Please let me know the results,

  Shlomi

• OfficeJet 6700 Premium e-all-in-one software limited scanning or it can be used via Photoshop?

  Hello...

  I use the HP Officejet 6700 Premium e-all-in-one Prod # CV078A on a Macintosh OS 10.6.8 macbook Pro (2.8 ghz Intel Core 2 Duo - 4 GB of DDR3 RAM).

  I try to run for the first time since that I recently bought this machine, and I'm running into some problems of quality. Digitization of works very well once I thought I had to use the utility software of HP scanning rather than access the scanner by Photoshop as I always had done before with my HP's Photosmart 2600 (I had for 5 years and more).

  The scanner HP scanning software (HP Scan v3.7.9 (59)) seems very limited.

  My questions are:

  • Is there a way to browse from Photoshop (or CS3, 4, 5 or 5.5) TWAIN instead of use the HP scanning software?

  • It is there no quality of analysis options other than a few easy turns, cultures and the very limited color correction, as well as certain preferences that allow adjustments to size/dpi of glass. What about scanning at larger percentages, Descreening and some more detailed agjustment image options?

  Thanks in advance.

  You are welcome

  As a general rule, the latest HP Scan 3 of the other less editing software options than previous versions of HP software.

  You can set the color settings by clicking the setting icon (). Cropping or rotating of the analysis can be done, but there is no option of resizing by the software.

  All image editing must be done with any photo editing software.

  Kind regards

  Shlomi

• Ghosts on pages double-sided printing second on Officejet 6700 Premium e-all-in-one

  Please can someone help?

  Printer name model e-all-in-one Officejet 6700 Premium

  Firmware MPM3CN1232AR

  Software 028.000.1315.000

  Driver 09.84.00.1173

  Win 7 SP1 64 bit

  Wired ethernet connection

  Problem

  On two-sided printing, the second side of printing on all pages is ghost. This is in particular the noticebale on verticals.

  This is true for all the qualities of printing on any documents .pdf or. doc.

  I use all the HP printing paper and original cartridges.

  I aligned the print head and checks suggested on the help pages.

  I contacted HP support, which were brilliant and replaced the printer and the duplex unit.

  They suggested that it was because I was using Office 2003 SP3 and Windows 7 but I find this problem on too but not in Wordpad v6.1 .pdf files

  The problem does not occur when scanned or copied documents are printed

  Is there a solution out there on this new printer please?

  Hi 007OHMSS,

  I carefully read through a VionAiry pointer to the post of ItalSanif with links to more articles.

  There were two main suggestions as to how to proceed. I didn't uninstall the "bloatware" and back to base for the HP Officejet 6700 Premium drivers, but I installed the drivers from the series HP Deskjet 6980 in accordance with the procedure at this link http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-7510-Duplex-Problem-y-axis-scaling/td-p/1754773 and listed below, with a few mods to include activation of unit duplex in one set of instructions.

  And you know what? This MARKET! Ghosting on the second side of all pages printed double-sided disappears to be replaced with a nice crisp clear impression. At present, all the other functions, including scanning seem not affected and function as usual, although of course the new driver (HP Deskjet 6980 series) makes the leaves of different properties.

  In my environment, I have also 3 XP machines in network connected wireless to the printer via the router and the PC Win7x64 connected by ethernet to the same router. Meant this download and the installation of the driver HP driver the HP Deskjet 6980 series for the XP PC Web page not the Win 7 x 64 because they were not present.

  I modified a bit routine and reproduce it below to help others. A/c for the original post, that was provided by the HP Technical Support. Why nobody's support services seems to know about or drivers have not been fixed I would never know.

  First turn off you will want the printer already available on the computer before you continue.

  For Win7 PC (XP is similar but not identical)

  1. Go to Start -online device and printers => then click on the "Add a printer" button in the upper left corner of the device window.
  2. Click on the button "Add a local printer" (choose this option if you do not your configuration)
  3. Check the box "use an existing port.
  4. On the drop-down list, select the option for example CN115130TP05JW , but use the correct name for the PRINTER port which is the serial number of your printer (do not use the fax entry)
  5. Now in manufacture of list on the left, select "HP".
  6. On the list of Printers to the right, select "HP Deskjet 6980 series (HP)" "
  7. "Once the pilot moved to enter in the" 'devices and printers ' window and right-click the newly added "HP Deskjet 6980 series" and select ""printer properties ' on the drop-down list. "
  8. Go to the "Advanced" tab, and then in the drop-down list next to the label of "Driver" select "HP Deskjet 6980 series.

  9. Click on the button 'Apply' - the configuration window should change it's shapea bit.

     10. in the HP Deskjet 6980 window properties, click on the tab "device settings" on the top of the window.

     11. in the list of parameters, search for "Unit duplex (for printing on 2 sides) ' and select it.

     12. once highlighted, select in the drop-down list ""Installed "; "

     13. When finished press apply

     14 now, go to what you use to print documents and select "HP Deskjet 6980" as your printer. Activate duplex printing and you should see the pages to print correctly.

  15. you can also change the name of the printer in the "Général" tab I changed it in mine to "HP Officejet 6700 with HP Deskjet 6980 pilot set shadowd duplex printing".

  I had a little problem in that, for some reason any in the document (e.g. Word / etc\ .pdf) box under the effects tab my radio button has mysteriously been on 20% until I changed it it was hard to see that there was no ghosting dialogue printer properties.

  So after complete 1 reconstruction of the printer of the original with the parts sent to HP services support for November 2012, an escalation at magnifications greater within HP (no answer) and a new printer of A...n, VisionAiry has pointed me to a solution that I had tried with DJ 450 drivers, nothing works, after a Shane_R post dated last year.

  So thanks to you and also to 007OHMSS who worked on this problem and original posters

  All I can say is that it worked for me and I am so grateful to everyone on this forum to ensure that I am sure of my eyes and mental health, looking more printed duplex printed with a shadow/ghosts and to be what they were not prepared.

  Congratulations so all round and thanks again

• OfficeJet 6700 Premium printer: Re setting My HP 6700 x Premium

  Emergency assistance is needed please! I managed somehow to me locked out many many functions on my printer that I tried to install on my new HP laptop since Tuesday, January 19, as well as the problem of getting my port number! as I have nowhere to put a disc in my new laptop! even if everything seems to work at the minute, I'm very worried if my printer need Urgent updates my printer stops working! I'd appreciate any help I could be offered please! informaitiom even on a full re my printer together please! some things that are locked on my printer are the date and the time in my country there are about 15 to 20 functions I managed to block me out!

  Thanks for any help you can give too

  Hello

  Thank you for using the forum.

  Please download and install the full software features from this link to win 10 for your printer:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930S6

  You can try to reset your default printer.

  On the front of the printer control panel select Setup > tools > Restore Factory defaults to reset the printer to its default settings.

  We recommend that you uninstall the previous software before you reinstall the downloaded software FULL of features,

  Hope that helps.

• OfficeJet 6700 analysis via radio to 90% and then fails with an error of communication

  New HP Officejet 6700 Premium; no error during installation; -device not scan via radio: scan to ~ 90% with the visible image in the preview is when inaccessible window of the Scanner is returned with the error message "Scannner communication cannot be established.  Ensure that your product is turned on, check the connection... ».

  Dell Inspiron E1505 laptop. Vista; Trend Micro Titanium 2011 Dell

  1. Network wireless, print, fax work very well.
  2. Software has been uninstalled, cleaned and resintalled.
  3. Fixed IP address received.
  4. Windows drivers are the most common, HP device firmware is up-to-date.
  5. When the trend is disabled, scanning works completely.
  6. All scanning functions and work completely through USB with active trend.
  7. MS Paint scanning to the device wireless without problem with active trend.
  8. Ports below were opened in the Windows Firewall.

  TCP UDP
  137 137
  138
  139
  161

  427 427

  9100

  9220

  9500

  • Printing and scanning doctor works and ends when the trend is disabled.
  • Print and scan doctor hangs up on Scan Test and returns the same communication error window when the trend is activated but no further information or help.
  • Contacted Support of trend, which has provided information on how to create an exception in the product and advise him to: "... to add the file scanner to the program exceptions list."   Trend has been unable to give advice on what specific HP or the files to add to the exceptions list.
  • File by file, the following files have been added to the list of exceptions of trend without effect:

  C:\Program Imaging\devicemanagement\hpzscro1.exe HP

  C:\Program 6700\bin\HP Officejet HP Officejet 6700.exe

  "\HP Officejet 6700UI.dll.

  '\HPNetworkCommunicator.exe '.

  '\HPScan.exe '.

  '\HPScanDisco.exe '.

  ScanToPCActivation.exe

  ScanToPCActivtionUI.dll

  Toolbox.exe

  ToolboxUI.dll

  C:\Windows\twain_32\HP Officejet 6700\HPScanUI.dll

  '\Scanapp.ini '.

  '\hpxsTwain.ds '.

  • Device IP address correction has been added and listed as an exception in Web site.
  • Other computers are able to scan wireless unit.

  Are there other HP file or file windows called scanner of HP who participates in the scan Communication that must be added or tried?

  A short history:

  After spending 4 hours and countless computers, printer, router restarts, channel changes etc, on the phone with HP printer support, to solve this problem, I was called back to my firewall provider (Trend Micro) when the product is disables scan works. (Yes, it's the same question that I started.)  As you can imagine made me unhappy...? Since I had already made contact with them for advice on how to configure the product before posting here in the first place and, possibly, appellant assistance from the printer.

  The solution was finally trend had me to rename a file in the registry, which, I presume, caused the trend product regenerate a clean version of the file.  As trend firewall exceptions had already been saved, scan over wireless works now! I post the location of the file and registry name, unless you use the identical product etc. to modify your registry database is scary business.

  Naturally, because it was just going to be like that, scan network worked, but then the network printer showed offline and I couldn't online despite shooters evil etc.  In the end today I completely uninstalled the product and the resinstalled it and now everything works.  Hard to be too crazy about HP, when, notwithstanding this saga, HP was right to send back me the vendor of the firewall... everyone gets their turn in the barrel of the dysfunction of the technology, and it was mine.

  What a striped set incredibly complicated of technologies that we depend on.  Travis, thanks for your help and trying on it.

• OfficeJet 6700 Premium: cartridges of OEM 933

  I was told that this printer is perfect for printing low volumn.

  I'm on my third set of ink cartridges, including the black cartridges scence XL that I print almost exclusively in black.

  I get about twenty pages until the cartridges need to be replaced.

  It is a joke.

  HP Announces hundreds of pages, but you get to price a little and then another ink cartridge. He used ink color, even when printing in black only.

  I pay almost $1 per page, with this cartridge.

  Dave708 wrote:
  

  I highly doubt that HP will do anything with a machine that is out of warranty for more than two years.

  It becomes cheaper to buy the printer to price low and throw it away when the ink dries.

  There is nothing you can do.   Read the comments here.

  http://www.Amazon.com/HP-OfficeJet-6700-premium-wireless/product-reviews/B006M1MSKG/ref=cm_cr_dp_see_all_btm?ie=UTF8 & showViewpoints = 1 & SortBy = Recent

• HP Officejet 6700 does not print

  I have a HP Officejet 6700 connected to my desktop HP w1858.  I can't the computer to send documents to print.  The printer icon has a yellow triangle with a! Select this option.  I tried to download a driver for HP printer, but it still does not print.  Windows does not list the HP Officejet 6700 (7100 & 6500 printers are listed).  Can I use a different printer model to obtain a class driver?

  Hi @katsus98040

  Welcome to the Forums of HP's Support.    I understand that you can't print from your printer Officejet 6700.

  I assume you see the exclamation icon is in your connected HP account.  Connected HP sometimes gives a false report that there is a problem not specified with the printer. HP has been able to reproduce the error.  If there was a genuine mistake, the message would point to the problem (low on ink, paper, etc). Unspecified error message does not prevent you to use ePrint.

  If I have understood you please let me know so that we can you top and printing.

• new applications for officejet 6700

  Hi I have an officejet 6700 and wanted to implement new applications, but the ePrint centre has been removed.  Is there another way to set up applications to the printer.

  Thanks in advance

  Hello @sandy1980,

  Welcome to the Forums of HP's Support. I understand that you want to add different printable cards to your officejet 6700.

  Retired to the ePrint centre, it is not possible.

  HP ePrintCenter - HP ePrintCenter is retired

• HP Officejet 6700: Paper jam - still a piece of paper glued and invisible

  During printing paper jam... I got about half of the paper off, however the piece missing (s) is not visible.  I tried to turn on / off power several times and keep getting a "problem with the printer or ink system...» Ox61000016

  Hello

  You mention you have tried to access better in paper space.

  Here is a link to the support page for the series 6700 JO printer that has a video explaining how to clear paper jams.  It may be useful.

  http://support.HP.com/IE-en/product/HP-OfficeJet-6700-premium-e-all-in-one-printer-series---H711/4322971/document/c03079119/

• Printing for Officejet 6700 problems

  Recently I struggled to print the word document.  I worked about 3-4 days ago.

  I have windows XP with MS Word 2010.  Printing is HP Officejet 6700 Premium.  I always use it offline.  It is connected to the computer via the LPT connector.

  The test page is printed.  But the word document does not work.  I also tried the computer laptop and excel documents, and I have the same problem.

  I know it's something very simple (at least I feel like that) bit is very annoying when you need something printed.

  Please help me or direct me to request additional assistance.  Thank you.

  JCM

  Take a look at this link for the print queue.

• OfficeJet 6700: print in black only

  I am wanting to print in black only. I removed the color cartridges printer doesn't like that we

  So, how can I disable the color cartridges?

  John

  Hi jozz71,

  If you are wanting to use the black cartridge for printing, you can follow step 2 in this document to change the print settings to print in black and white:

  http://support.HP.com/us-en/product/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/document/c04331666

  Please be aware that you don't need two ink cartridges to print.  The printer uses little color for printer maintenance.  This interview is described in the document I have attached.

  Once the color cartridges is completely exhausted you must replace it in order to print.  After this setting the printer to print in black and white will minimize the used color and make it last longer.

  I hope it's useful for you.

  Jean