OfficeJet 8500 has stops at "now printing" After sleeping

Similar Questions

• HP Officejet Pro 8500 has: WIFI connection to printer after moving from a computer in another city

  I recently moved from Nevada to California with my printer.  I can't go to the printer.  The wireless light is lite. The printer has worked with this computer I Nevada. Promp in window says "printer is unable to connect to the server.

  "You can connect to the server through a proxy server" what is a proxy server address

  Hi @Raggetty ,

  I understand that you are having problems with the printer via the wireless network. I will definitely do my best to help you.

  Since you have moved, you must install the printer on the network.

  If you haven't already done so, restore the default settings of the network printer. Go to configuration, network, restore default network.

  Then set up the printer on the network again.

  Follow this document:

  Configure the printer to a wired network or wireless for the HP Officejet Pro 8500 has e-all-in-One Printer Series.

  If you need help to set up the printer on the network, let me know.

  Good day!
  Thank you.

• HP officejet 8500 has more will not print black and white because the color cartridge is low

  I have entered the property and set it to 'levels of gray' and 'use black ink only', but the printer still will not print because "the yellow ink cartridge is low.

  incredibly frustrating that the cartridges of color completely stop you from printing, even if you are trying to print in color.

  Proffessional OS-windows 7

  is there a known solution for this?

  Unfortunately, the printer does not print until the replacement of the yellow ink. There is no work around for low ink message.

• HP OfficeJet 8500 has more 910 g give up connection every now and then

  I explored the forums for 8500 more connectivity issues and did the following, but the problem persists:

  I am using the Wi - Fi connection (force 4), web update services and software packages, can use eprint, but printer loses connection (even with eprint servers). I have it set to fax so phone line is connected and noticed that when a call arrives (or goes), it restores the network connection. It seems that he loses the connection when it starts in mode 'sleep'. Is there a way to disable, and then do a test?

  I noticed that first print wirelessly from a laptop computer crashes and comes back with an error (sometimes work after a long time), but the second try and then work (it seems that the first test is trying to put the printer back to the mode 'sleep'!)

  I have the static IP assigned (in both the printer and the router) and static DNS primary.

  I have IP v4 ONLY on the printer.

  What can be done? Help, please. The printer is only a few days old!

  I finally realized that you can go to the 'Préférences' menu on the touch screen and disable the "power saving Mode" - this apperently solved the "problem of loss of connection" (with static IP/DNS and IP v4 only)- but the screen was continually WE (and quite brilliant - more than a lamp at night!). I also found that there is an option under "Tools" screen saver But the screensaver works just the video "promo" continuously without interruption and with the same brightness on the screen. Is it possible to say 'black' after 10 minutes?

  Perhaps HP should provide a screen saver that turns off the display after a period of inactivity.

  APPARENTLY, THE LOSS OF CONNECTION BUG IS DUE TO "ENTERGY SAVE MODE" WHERE THE WIRELESS LAN CANNOT DETECT TRAFFIC TO WAKE UP THE PRINTER. THIS SHOULD ALSO BE FIXED IN THE NEXT FIRMWARE.

  To SUMMARIZE: In order to avoid the 'loss of connection"(for wireless) perform the following steps:

  1 assign a static primary DNS and static IP address (through EWS doing via a browser is easier - see below on access EWS).

  2. optional but recommended: connect the printer wireless MAC address to the same static IP address in the configuration of the router (router consult manual or vendor on how to do this).

  3. via the integrated Web server accessed through a browser of computer - under 'Network' settings, select 'IP v4 ONLY' (EWS is accessed through a browser on the same wireless LAN by typing http://192.168.1.xxx - where xxx is the IP address assigned statically - you can find it via touching the wireless icon on the screen in the printer)

  4. go in the 'preferences' and disable the "power saving Mode" (in the touch screen of the printer interface)

  5. optional but highly recommended: turn on the "screen saver" in the "Tools" menu (in the touch screen of the printer interface)

  6 see if it the problem slves (mine is running fine since then)

  These steps are for HP Office Jet 8500 has more 910 g printer. I hope it helps someone here!

• HP Officejet 6500 has stopped printing

  For some reason, my HP Officejet 6500 has everything in a printer does not print any more. The document moves through the printer and comes out blank. It does not print anything to a file on the computer, including something as simple as a letter. It won't photocopy. It will only accept faxes. The paper just moves from the status bar if the machine and get out again, blank. When I tell it to do a test print - it will print the boxes and lines and color, but does not print anything else.

  About a week ago I had trouble with my air conditioner, and he got up to 90 degrees F in the House. The printer worked fine before, now it doesn't. The fire to something the printer?

  For some reason, my HP Officejet 6500 has everything in a printer does not print any more. The document moves through the printer and comes out blank. It does not print anything to a file on the computer, including something as simple as a letter. It won't photocopy. It will only accept faxes. The paper just moves from the status bar if the machine and get out again, blank. When I tell it to do a test print - it will print the boxes and lines and color, but does not print anything else.

  About a week ago I had trouble with my air conditioner, and he got up to 90 degrees F in the House. The printer worked fine before, now it doesn't. The fire to something the printer?

  I don't know how all this relates to MS Windows, but maybe you could try HP support regarding problems with your printer, for example.

  http://h30434.www3.HP.com/T5/Web-printing-software/OfficeJet-6500-won-t-print-black/TD-p/462153 the heat in the House can have dried ink cartridges.

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/printer-HP-OfficeJet-6500-E709n-series-doesn-t-print/TD-p/1897459

• Windows 8 scanning on officejet 8500 has more

  After the upgrade to Windows 7 to 8, I am unable to scan using my OfficeJet 8500 has more.  Downloaded the latest troubleshooting and printer seems to be installed, and is the default.  I am able to print, but when I go to print Center and select the option analysis, I get an error message that the printer is not installed.  Same thing happens if I try to trigger a sccan of Acrobat 9 pro.  When I I select the printer from the drop-down list at the bottom (only one), I get an error that there is a network error.  Monitoring of the parameters of the firewall enabled (by default the firewall windows at this point) does not measures on site, in case of problems.  Tried to remove and reinstall the printer, but also the re-launch of the connection Wireless to the printer, No go.

  Am able to print wireless without problem, it's just scanning it is a problem.

  Hello TainoTechy,

  You will need to uninstall the instances of the Officejet pro 8500 Control Panel

  just start typing Control Panel , which is expected to open the Control Panel window.

  Click uninstall a program , which is under "programs".
  Locate for HP Officejet Pro 8500 has "entries and Uninstall the."
  After all programs associated with HP Officejet Pro 8500 has "are uninstall, you can restart the PC."
  Download and install the software for the same thing using the link below...

  OfficeJet 8500 software to win 8

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• erase memory on HP officejet 8500 has more

  I intend to give my HP officejet 8500 has more and I was wondering about the erasure of memory.  The specs say it has 128 MB of memory and I wonder if something might be stored in which could be sensitive information against things that I copied or printed.  How this memory can be erased?  I've not found anything by Google it

  Hello

  Please try the following - sorry, it's not English:

  http://www.YouTube.com/watch?v=dfnET-jRXGo

  In short: If you look carefully at the screen of the printer, you can see the 'RETURN' key, although it was not lit. Press 4 times. This should open menu supported...

  Kind regards.

• The analyses are not in line. OfficeJet 8500 has more

  My OfficeJet 8500 has more analysis not evenly.  The upper left area is darker than the rest of the document.  A way to fix this?

  If you have performed all troubleshooting, including the cleaning of the surface of glass scanner, then I would say you are right in your assessment of the defect.  How long have you had the replacement product?

  However, I have one last thing, I would like for you to try.  I have the steps for to do you a factory reset on the printer.  I'll send them to you via private message.  Please check your Inbox for messages in the forum.  Before you perform these steps, please read Bob_Headrick wire on the printer reset, found here.

  If the product is still under warranty, then I suggest call HP for Technical Support on this device.  If you are in the USA / Canada, then the number to dial is 1-800-474-6836.  If you are not in this area, please click here to access the global contact list for HP Technical Support.

   

• OfficeJet 6500 a: how to adapt a HP Officejet 6500 has so we can print on both sides

  Hello dear hp team

  I have a HP Officejet 6500 has more that color print on both sides.

  Now, I have only a 6500 a which initially can print one side.

  I changed the room in the back (I put the piece of the 6500 has more printer) so that mechanically, he has the ability to print also the two sides.

  Now how do I program the printer so that it detects that he now has the ability to print on both sides?

  Thank you for your reply and sorry for my English mistakes.

  A student of the Swiss school.

  Hello

  As suggested in the post above, only available for the printer manual duplex printing.

  The accessory of the duplexer is designed only for he 6500 more than model a, it is not intended and cannot be used with the model 6500 a, as you can find below:

  Suitable only for HP Officejet 6500A Plus e-All-in-One Printer - E710n
  

  http://support.HP.com/emea_middle_east-en/product/HP-OfficeJet-6500A-e-all-in-one-printer-series---E710/4083974/model/4083869/document/c02492482/

  Shlomi

• How change the font size on a hp officejet 8500 has more

  I have a hp officejet 8500 has more.  How can I change the size of the font to print full page.  The numbers of police is very low.

  Thank you for your help.

  Kathy {personal info deleted}

  Hey Kathy,.

  I see that you have a problem with the text in small font on printed documents.  You say that this only happens when the navigation and printing from the internet.  What browser do you use?  (Internet Explorer, Chrome, Firefox, etc.)

  Have you tried using another browser?  Normally this problem is the result of a problem of compatibility between the printer driver and the browser program.

  So, you can try using a different printer driver, such as the 990 c driver.  The other pilot should be able to go beyond the question of compatibility and printing back to normal when on the internet.  For more information on how to exchange for a different driver click here.

  Hope this helps,

  Jason

• OfficeJet 8500 has Premium how fax or copy a paper double-sided

  Where can I find how you copy or fax a paper double-sided?

  OfficeJet 8500 has Premium

  Thank you

  Keith

  

  Finally figured it out myself

  Thank you very much

• OfficeJet 8500 has 910: Macbook Pro won't find my Officejet Pro 8500 printer

  Until recently, my Officejet 8500 910 has worked very well with my Macbook Pro, desktop computer wireless Mac and iPad.  Now, it will not be printed with any of these devices. Yesterday, he worked with my iPad, but today it says that it cannot find the printer. On my Macbook and desktop computer, it is impossible to find the printer when I try to add.  You can find the scanner and fax part of my all-in-one, but not the printer. I deleted all my printers and tried to add this back.  I've stopped and restarted. I checked that my printer is connected.

  I have same thing happened with a HP wireless printer in the 8600 series to work.  Sometimes he would find and connect.  Other times, it wouldn't. I appreciate all help.  Thank you!

  Hey @Jeanne33,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see that your Officejet Pro 8500 all-in-One Printer does not appear on your network. I can help you with that.

  1. As you only use Apple products means that the printer is no longer connected to your network or a parameter has been changed on your network. That being said, this is what we will do:
     Turn the printer off.
  2. While the printer is off, remove the power cord at the back of the router for a minute.
  3. When the lights came on the router, turn on the printer.
  4. Try to print.

  At this point if you are not able to print, then we will do the following:

  1. On the printer, click on Configuration, network and wireless view summary.
  2. If you see a line indicating connected the printer is properly connected to the network. If this is not the case, then, from the main screen, click on Configuration, network and wireless configuration wizard to add the printer to your network. Try once done printing.

  At this point, you should be able to print. If the printer still doesn't seem to add as a device for the Mac or appear on any other device and then you have a setting on the router that has changed. Your best option would be to communicate with the person who is provided with the router and ask them to do the following:

  • Open all ports.
  • Select multicast.
  • Disable MAC filtering/MAC cloning.
  • Disable the guest network
  • Make sure that the router has a band of 2.4 GHz.

  Please let me know if this allows you to print or if you have any other questions. If not, have a great day!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• HP Officejet 6500 has stopped printing, paper white just came out.

  My Officejet 6500 has just stopped printing.  I use a USB connection and my operating system is Windows XP Home Edition.  At first, it was just the text that Wouln't print but the colors would come by, even on test prints.  On a print document the little box comes up showing the data transferred to printer, printer starts but doesn't work with a blank page.  I have uninstalled/reinstalled program, has gone through the full program of the HP Solutions guided, checked all connections, installed the new driver, and yet do not print anything.  Have never had any previous problems since I bought.  I have not recently installed new programs.  Would appreciate any other suggestions.

  After everything I lived, I finally solved the problem.  Although the ink levels showed ink cartridges, I put a new black in one and it works!

• OfficeJet pro 8500 has more: Officejet pro 8500 has will not be printed sheets

  I have an Officejet Pro 8500 has more printer. I try to print the recipes on cards, but everytime I try to do my printer says "incorrect paper size" and then cancels the job. How can I fix it? I have a macbook... I don't know if it's part of the problem?

  Most programs running under OS X obey the size of default page defined by the Print Center/Printer Setup Utility preferences. A notable exception to this rule, however, is that Microsoft Word, which has its own system to decide what paper size to use.

  Change the default value of letter to A4

  Idea of what should be the default paper size is set in the Normal template. Go to Format > Document, and then press the button layout... . Set the size of A4 paper, and then press OK. Press the button by default... , answer Yes to the dialog box, and then press OK. - Source

  I imagine that this also applies to listings so instead of A4, you'd look for 4 x 6! Please let me know if that does the trick!

• HP Officejet Pro 8500 has more: 8500 has more - will not print in color and alignment of printhead failure

  I have new ink cartridges, but it will only print in black.  Grayscale is not on.  I also cleaned the print heads several times and tried to line up, but this part came failure refers to the documentation.  What are the documents?  I would lov eto to be able to print in color again!  Any ideas?

  Hi @Adriana8,

  I see that you have problems printing in color. You have changed the cartridges and have the same results. I want to help you solve this problem.

  Please, try the following steps to see if it will help solve the problem. Ignore the titles of 2nd & 3rd documents.

  HP Officejet Pro 8500 printer - color or black ink prints do not.

  All-in-one HP Officejet Pro 8500 (A909) and Officejet Pro 8500 has e-All-in-One (A910) Printer Series - one "ink cartridge appears to be missing or corrupt" control panel displays error on the printer.

  'The following printhead appears to be missing or damaged' display for HP Officejet Pro 8500 has e-all-in-One Printer Series.

  You use genuine HP cartridges?

  If you appreciate my efforts, please click on the "Thumbs up" button below. Good day! Thank you.