OfficeJet 8620 two problems one) Win7 firewall connection wifi and b) the printer multi-network
Bought the printer this afternoon and set up a computer - connection to a printer with wifi as advised in the closed paper work and CD. No problems.
When I put it in place of the second computer (with wifi) using the CD provided, I received an error message that the hp software can see the given IP address printer but he could not automatically connect using the "typical connection method. Tips in the dialog box has been to change the settings of firewall computer method of 'typical connection '. Any advice on what this might be. Looking at the Win7 firewall, all HP printer software are checked for the home network and the public. What else the firewall must Win7 allow to operate the automatic printer connection? BTW, I followed the advice of the installation software and punted for the moment. The warning by the software that was if the printers IP address changes, I'll have to manually change it into the computer with the firewall issue (ugh).
That leads to the second problem:
A couple of my computers are ethernet only. No wifi. When I plug ethernet to the 8620, it defines an IP address for itself on ethernet, but he abandoned the wifi IP address. How can I feel some ethernet connected computers and some wifi connected ones.
Any constructive advice is VERY WELCOME.
I apologize in advance if there is already a solution posted either of these problems; I couldn't find searching them the forum.
Lenny W.
Hi lennyw07016,
Thanks for letting me know that worked for you.
I suggest the setting up of a static IP address. In this way the router will always assign the same IP address to the printer.
Printer does not keep the wireless connection.
Proceed to Solution 3: printer of the assign a static IP address.
Here is a document for configuration of a firewall to allow a connection with the all-in-one Windows.
You can check if you like.
Thank you.
Tags: HP Printers
Similar Questions
-
7520 - problems connecting to wifi and keep the printer connection
My new HP printer 7520 does not connect to the wifi unless I unplug the router enter the wireless information, get a connection, and then reconnect the AT & T and I'm good. HOWEVER, if I turn off the printer I have to go through the all new to recover the wireless connection! I know that this has been a problem in the past, but I see not all new messages in this regard. I just bought this printer not realizing that she doesn't have an ethernet port, a big mistake. I'm very frustrated and hope someone has an answer for me! Moreover, I am on a mac with OS of mavericks.
Thank you very much to explain that to me, I looked at the Configuration Page of HP network and it does not list my SSID twice, one on channel 3 and channel 11 so I'll follow up with AT & T if I have additional problems. But everything seems to work now, I turned it and turn it back on this morning and it connected after a few minutes. Turn off the IVP6 must have made a difference after all. Thank you very much, I like this printer and it's features, and I'm glad it now works as it should!
-
8600 Officejet pro all-in-one: 8600 cannot connect wireless Officejet
Unable to connect wireless when adding the printer. I can see the IP address and the name on the report to the printer, but can not see the printer when I try to log on my computer. It worked fine until I loaded the latest patch. It's the same thing with another 8600 and I got to the wire that one for the router to print. This 8600 is too far from the router to run a cable (at the top). (only about 20 feet of actual distance.) I see that the printer is enabled on the router. I tried to add the printer to the computer with the IP address and the hostname without success. We were working wireless until today. I've uninstalled and reinstalled the driver without success. Still do not see the printer.
Any suggestions?
I forgot to say that I fail to see the printer wireless to 2 separate computers - an 8.1 and other windows 7.
-
I want to burn files to a cd, there are two files, one is 8.1 GB and the other is 3.5 GB, what capacity of CD should I buy to take account of these files, or is there any method I can use?
First of all, you cannot use a CD for each file - they do not provide enough space (and I'm pretty sure same compression help not enough).
You can burn the 3.5 GB on DVD or DVD-R DVD - RW file, as long as it's a guy with enough space http://en.wikipedia.org/wiki/DVD.
8.1 GB file CAN be turned into a DVD, but you need a very special type (and maybe special software - I'm not sure about this). An article on the different types of DVDs and their abilities of here: http://en.wikipedia.org/wiki/DVD.
There are a few 3rd party software products that allow you to split a large file inot several pieces to fit on a game sequenced CD, but I couldn't find one that was free. To do this, you can check on www.download.com, www.tucows.com, Bing, and Google.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Original title: cannot run Microsoft Fix It to Program_Install_and_Uninstall
When I run Microsoft Fix It for Program_Install_and_Uninstall, I get "we're sorry, but we encountered an unexpected problem, one or several upload components and cannot run the troubleshooter now...» »
Hello
Why you try to run the fix it tool?
Post to fix any problem with Microsoft tool in Microsoft Fix it Center forums.
http://social.Microsoft.com/forums/en-us/category/msftsupporttools -
I recently burned music CD blank so I can enjoy some songs in the car. After that a few discs engraved with success, I received the message "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged"when trying to burn audio. To see if it was the m drive, I tried to burn audio files to four separate discs and each of them had the error message. The discs are brand new and have no information on them. I do something wrong or is my burner disconnected? Thanks for all your help and your support! I hope that we can find the cause of this problem so I can continue to make the CDs.
Consumers concerned,
Cody bridges
Could you also confirm that it is playing the discs ok?
Run the sfc tool and see if it shows anything... instructions here.
http://support.Microsoft.com/kb/929833/en-us
-
WMP 11 says connect burner and restart the computer
WMP 11 has just started this problem when I click on the tab burn I it tells me to connect burner and restart the computer
Hello
1. do you get an error message when you try to download files?
2. you have any third-party burning software installed on your computer?
3. do you have Internet Explorer 8 is installed on your computer?Follow the steps mentioned below and check if it solves the problem with Media Player:
Method 1: Run automated troubleshooting who diagnose and fix problems with your CD or DVD drive when trying to read or burn media automatically.
See Your CD or DVD drive cannot read or write media
Method 2: If the problem is new, run system restore to restore the computer to a point before the problem started.
Refer to this article for help:
http://support.Microsoft.com/kb/306084Kind regards
Afzal Taher - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
The printer indicates that online, my laptop said that it is in offline mode, I've deleted and reinstalled the printer and still the same problem, please help
You are not quite correct. Some newer wireless printers have only a wireless connection. No USB port and a standard Ethernet cable port.
-
HP Officejet Pro 8600 Plus: I think I need to uninstall and reinstall the printer
My printer started to print only if I turn it on, then go back on it. I think I need to uninstall and reinstall the printer. I have the CD, but not sure of updates. This all started when my cable company came out to solve my problem of modem and saw that I was running my wireless printer. He said that I should never do that, so I went back to USB. When I did, the printer would not analyze. I've switched back to wireless, but now I have the power problem. Help!
Hello
Try the procedure described in this doc connecting the printer after change of your wireless network.
-
My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.
have you tried to change the batteries in the mouse?
-
My Windows Media Player says connect burner and restart the player.
My Windows Media Player says connect burner and restart the player and I have and still get the same results
Hello rorro1661,
What you try to do in Windows Media Player?We need more information to help you:Maybe you try to burn a CD? -
I bought from amazon lightroom 6 and I have win7 pro 64-bit and during the installation message appears OS not not met requirment win VISTA NOT supported
See the link below:
https://forums.Adobe.com/thread/1836232
The folder Lightroom 6.
Right-click on Setup.exe and choose Properties option.
Then click on the Compatibility tab.
The value of the Windows 7 operating system and check.
-
I have Macbook & Office XP connected to the printer (HP Officejet 5746 e-all-in-one printer) necessary to connect Random cell phones to print the data. All directions? TIA Doc
You need a wireless setup to print from Android phones.
Please see this link for mobile printing options available:
http://www.HP.com/go/mobileprinting/
WyreNut
-
Okay, so my problems are...
(1) I downloaded a theme for the first time and when I did, it worked perfectly fine. After updating, I download the theme again and it helped, but the theme will not change the look of my browser. When I tried one of the relevant articles, I cleared my cookies and cache and downloaded the theme (A Blue Fox), installed and turned on, and it worked perfectly fine! I tried to upload another (Pink Fox), one installed and activated, but it did not work. Instead, he returned to the default theme. So I tried to clear my cache and cookies again and repeat the process, but now after downloading, it says "error".... "I don't know if it says"Error Downloading"or"installation error ". Now, I tried to download it again after turning off my computer and turn it back on again, but (today), the two has not applied to my browser. They both had the same look... by default! Please tell me what is the problem!
(2) in my "Add-ons Manager" page, on the appearance tab, there is no button disable for my modules. Only the "delete" button is present.Please help me!
NOTE: I already tried to reset Firefox, but it does not solve my problem.
You do not disable a theme, but you choose another theme if you want to change the theme.
Remove button is for when you no longer want this theme.You must select a theme and then close and restart Firefox, if you want to use this theme.
If this does not work, then you may have a problem with the prefs or something interferes.
If you don't keep changes after a reboot then see:
-
HP Officejet J4580 all-in-One: I just need a disc from the drive, please!
OS was wrong?
Hello
The disk may be too old now. If please download and install the following software and driver:
http://ftp.HP.com/pub/softlib/software10/COL22247/MP-58704-2/OJJ4500_Full_10.exe
More resources:
Kind regards.
Maybe you are looking for
-
Windows update KB979909, KB982168 and KB974417 install over and over again
Windows update KB979909, KB982168 and KB974417 install over and over again. This update I had during the last few weeks over and over again. Installation and restart and the update comes again. How can I stop this? Looks like the only way to stop the
-
the upgrade of windows 8, Windows 10. Is that all I have to do. Drivers?
I upgraded from windows 8 for windows 10. I had CC Adobe Lightroom and Photoshop on the computer before I upgraded to windows 10. I need to download drivers for windows 10 now? Lightroom has been timing much. It does not stop it just work has thes
-
Is there a command to echo to RMAN?
11.2.0.4/Oracle Linux 6.3Is there an equivalent of the echo in RMAN command? In the log file, I want the following in red print.RMAN target = / nocatalog < < EOFrun{restore the database;switch datafile;Echo «Starting recover...» »recover the database
-
Rubber under the power supply cable.
Cable rubber that connects the card reader and cheated and the lights leading to the card mother background under high temperature?
-
3-d element does not display the textures of the models
I use after effects cs6. I use the 3d element to create a 3d intro. but the 3d element is not displayed the textures. for example the Exchequer in the starter pack does not display textures. and also when I open aired it to add textures texture chann