OfficeJet J6450: No ink coming out

Similar Questions

• HP 5510 printer - no ink coming out the new hp cartridge authentic

  my printer says that I need to replace the... replaced black print cartridge w / new & hp black cartridge auth... when I try to print anything

  no color transfer paper except a very pale yellow... I checked to make sure that I inserted correctly.

  The info. window on printer not tells me something is wrong... the news. would be greatly appreciated.

  Thank you.

  During this time, I cannot print my shipping labels!

  Have you tried the troubleshooting steps suggested in this document: c02914910

  I work for HP but my messages and responses are mine.
  Nice day.

  If you like my post, click on Bravo.
  -Mike

• OfficeJet J6450 does not print shades of gray or black

  I have an Officejet J6450 all-in-one, and I'm on Mac OS 10.5.8 on PowerPC Mac. I have some problems, and I didn't know the answers elsewhere.

  1. the printer seems to "mix" the colors of the color cartridge to create black instead of use of the balck cartridge ink black. A color XL cartridge lasts barely more than one, even if I do small specific color printing. Almost all my impression is based on text, however, I print interent pages here and there. In these cases, same black text prints "colored." How can I ensure that the printer selects the black cartridge to print in black?

  2. I need to print the slides for the school. I got the impression of the 'gifts' and select 'black and white '. Despite this, the printer tries to make black the color cartridge and I often find myself with green or red prints. Not fatal, but it totally wastes my color cartridge. I tried naming the color of the text in the slides as 'black' instead of 'automatic', but this did not help. Yet once, how can I make sure that the printer uses black?

  3. should I have an installed working color cartridge to print in black? I can't install 2 black cartridges?

  Any suggestions are welcome. I can't believe how much ink the printer consumes. What a waste - not only my money, but for the environment. Time shop for something more effective and practical. I feel bad, even a gift this eater of ink to charity.

  THANK YOU in advance!

  Thank you!! I know I have enough cheap paper, but I think the selection of paper made the rounds. At least in PowerPoint. I printed that one page, but it seems dark enough for me. I'll write again if several pages do not work.

  How can I get the B & w Web to print pages?

  In addition, no idea if I use TWO black cartridges?

• OfficeJet J6450 - printer connects wireless but does not print job cable modem replacement

  Material: My printer is an OfficeJet J6450. I am running Windows Vista, current update.

  Probably triggering the event: I replaced my modem docsis 3.0 with a doscis 2.0 modem. PSI has remained the same. All other software and firewall remained the same.

  Dysfunction: After the replacement of cable modem, I found that I could print is no longer in my HP OfficeJet 6450. I would get an error in the printer window ' error - print. "  After the reboot after the publication of the initial error, I would get the error "error - sent to the printer.

  What I did:

  As a first step, I've uninstalled and reinstalled the HP software for the printer (complete package with exception of PhotoSmart and HP customer monitoring program).

  Use the connection for the network printer wizard, I entered the router password wireless to the printer. At first I don't have a connection. Then I rebooted the computer and the printer. I also returned to the default setting of network on the printer and repeated the configuration of the network. The connection was finally successful.

  The automatic test of the network page and the network printer wizard confirms the connection. Digital display of the printer and the HP diagnostic utility has also confirmed the connection. But the diagnostic utility is unable to print a test page and throw an error - "Print Test failed.

  The result disappointing:  I still can't anything to print wireless.

  ... Thanks in advance for your suggestions to get my printer back on...

  Go to start > Control Panel > printers and delete all instances of the printer.

  Then re-add the printer:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.  Get IP address of a Test of Netowork wireless on the front of the printer (usually in the network menu).
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• OfficeJet J6450 All in One printer cartridge wrong cartridge, but it is not

  I have an Officejet J6450 All in One Printer.  I only use the new HP cartridges (not renovated, manual not refilling).  I installed a 74XL into the printer about a month with expiration of 02/11/2014.  It is still more than 1/2 full and very well printed yesterday.  Today, without apparent reason, the printer is saying that the ink cartridge is not supported by my printer... it is evil.  I tried a reset (3 and the # and when it does not 6 and the #) unplug him and by plugging it in.  I also removed the cartridge and tried both resets and then put it back in and still got the same error message.    I cleaned the print heads with a coffee filter and distilled water and tried the reset with unplugging and plugging back.  That didn't fix it.  Also, I deleted all of the permits from the hard drive and reinstalled the drivers and all updates (which I am automatically in any case, if the printer was already updated yesterday).  That didn't fix it.  I have tried everything and can't get this stupid to work printer.  I spent hours and hours on this.  I put in a new cartridge and it seems to work now, but I don't want to lose more than 1/2 full cartridge with no recourse.  I am a mother of 6 and the ink is very, very expensive, and what happens if this happens again?  Someone at - it ideas?  Any help would be appreciated.

  Sounds like the cartridge has failed, because its guarantee until 2014 I would contact HP telephone support. Can you please let us know how you get on?
  Thank you
  Ciara

• HP OfficeJet J6450 goes Offline

  A couple of months my OfficeJet J6450 started going offline a lot.

  I have a Dell Windows 7 laptop, and my wife has a Mac.  It does the same thing for us two.

  So I took the new Mac out of the picture, and he always does on my Windows 7 PC.

  I can print to it, but to come back a few hours later and my print job is in the queue, but the queue is offline.

  I have you unplug and plug the printer back in, and then everything works fine... For while.

  When it says offline, I can still go to the web page of administration for it.

  It's funny it says offline, but I can still reach it with the administration tool.

  Also, I can still scan/copy/fax.

  Don't just print.

  I tried:

  Uninstall the software completely and reinstall a couple of times.

  Both the software supplied with the printer and that Windows finds.

  Wireless and wired.

  Booking the ip address on my router. (But this doesn't seem to be the problem for the administration tool and Scan connects to him, even when the print queue says offline).

  HP Print and Scan Doctor 4.1

  Turn in a clockwise direction in my chair 3 times, then hit printing.

  Etc.

  Someone at - it ideas?

  Thank you

  TrailMoose

  Symptoms waiting for me as if it was the printer itself and not an individual computer or the wireless/wired access.

  (1) I installed printing base HP Officejet and scan driver:

  OJJ6400_Basic_13.exe

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-79315-1&cc=us&DLC=en&LC=en&OS=4063&product=3635399&sw_lang=

  (2) then I upgraded the firmware:

  OJJ6400_830AR_EN.exe

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-65551-1

  I think it's the update of the firmware that fixed it.

  But who knows...

• I have no sound coming out of my macbook pro and see a red light in the hole of the listener.

  I do not have its coming out of my macbook pro os x 10.8.1 but if an earphone is connected I hear the sound and there is a red light through the matter of earphone. What is happening to you can help me?

  The red light of the headset jack means the MacBook Pro thinking that an optical audio cable is plugged into the port. Try to have disconnected and reconnected a headphone plug into the port several times. There is a tiny sensor inside the port that determines if the port is operating in analog or optical mode. Something similar by plugging should trigger the sensor and restore the analog signal.

  If you don't feel capable in doing so the folks at Apple Genius Bar will be able to help.

• Black dust coming out of air vent

  I had my hard drive changed under warranty last year due to the failure and loads of carbon black and dust coming out of the ventilation duct. I just noticed on start up there is more of this dust that comes out of the machine. I did a test of hardware, restart keep had ', and when the fans were running a cloud of dust came out covering my work desk. The test reported no error, but I'm really worried because it is an indication that the new drive is defective, and my warranty run out 15 days ago.

  Has anyone else had the same symptoms.

  What is a hard disk drive failure indication, (carbon bearing bushes).

  iMac (27 inch, end of 2012), updated with all software updates.

  Thanks in advance, Mike Smith.

  

  First thing to do is to back up your hard drive.  Then I would make an appointment as soon as POSSIBLE to the Genius Bar approach for a check without a diagnosis.  If you are only 2 weeks out of warranty, you might be able to talk to them in honoring it.  But get on record as soon as POSSIBLE for an appointment.

  

• I thought WWDC 2016 TEU June 13 at 10 am PDT. Some sites say that the event is from 13 to 17 June. What is the date on which they will announce if there are new products coming out. What is 13?

  I thought WWDC 2016 was just June 13 at 10 am PDT. Some sites say that the event is from 13 to 17 June. What is the date on which they will announce if there are new products coming out. What is 13?

  WWDC is the 13th week, not a single day. However, at 10:00 13 will be the speech. It's what you want to watch. You can download the application to your computer via: Developer Apple WWDC Watch - WWDC -. You can download the app for iPhone, iPad, or contact via the iTunes Store.

• Help! iPad 2 keeps coming out of the recovery mode. I have the latest version of itunes and updated my drivers.

  Help! iPad 2 keeps coming out of the recovery mode. I have the latest version of itunes and updated my drivers.

  Please take a genius appointment at an Apple Store, or select another authorized service provider.

• Will there be another windows coming out soon with the floppy drives and DVD players.

  Will there be another Windows coming out soon with the floppy drives and DVD players.

  Hello

  Disks: I don't think so. I always keep 25 floppy disks for Windows 95, should be a few thousand disks for Windows 10. Very, very, very expensive to store files and transport.

  Of DVD: would soon come out, new machines will have 10 Windows (who knows) pre-installed or downloaded. You can always find Windows 10 DVD in some countries where users will still have to use dial-up Modem.

  Hope it makes sense.

• Satellite A80-128: pointer gel coming out of sleep mode

  I have persistent problems with gel pointer coming out of sleep mode. I have to reboot to get it working again. All this experience? (I also had two new hard drives mounted so far due to problems of pointer!)

  Hello

  Have you installed your device with the Toshiba Recovery CD?
  On this CD, you will find a Windows image with all the drivers, tools and patches.
  (Quickfix engineering) QFE patches East of patches from Microsoft you can also find on the Microsoft Web sites.

  But if you have installed the operating system with the Toshiba recovery image all have to factory with no problems.

• TrueSuite Access Manager unlocked when coming out of standby

  Hello

  I have a Toshiba laptop with Windows XP Service Pack 3. There is a program called TrueSuite Access Manager responsible in this regard.

  When I leave my computer unattended for a short period of time, I lock by Ctrl + Alt + Delete and unlock everything just when I get back to him.

  Sometimes I put my computer in stand by mode. When I bring it online, it will automatically unlock and you can access everything on it. How do I set up my computer as it will be locked and requires a password when coming out of standby.

  Thanks in advance a lot.

  Hello

  If you are using Win XP Toshiba Power Saver must be preinstalled on the laptop.

  TOSHIBA Power Saver contains a very useful option that you're looking for.
  Go to Toshiba Power Saver and check the tab called configuration Action.

  You will find the option called password prompt during the recovery of the standby or hibernation mode.
  This option must be enabled!

  I hope this helps!

  See you soon

• Strange noise coming out of my Satellite L40

  I noticed two times a strange noise coming out of my Satellite L40
  On one or two seconds, there was a sound that sounded like the noise that you hear when you use a dial analog modem and try to connect.

  He came out of the blue and I use a DSL wireless connection.
  The sound of my cell phone was off.

  Is that what anyone has noticed the same thing or do you not know what it could be?

  * @ doeternietoe *.

  > Have you noticed the same thing or do you not know what it could be?

  Not easy to say what his might. On my notebooks HARD drive makes strange noises also. But it runs and runs and everything seems to be ok.

  * @ Oleg_II *.
  > PS why this strange message for registered users? «Please note that your response will have to be approved by a moderator before it is posted in the forum.»

  This message is displayed if the message contains a bad, bad or not appropriate words and the forum moderator can check before if will be posted here in the forum.

• I have a HP officejet J6450 all-in-one.

  I had a paper jam and removed the paper.  I tried to turn off the printer before I removed the jam but the printer does not turn off.  I bed 'Shutting Down' but he continues to say that and the power button flashes on & off.  I tried to print something to see what would be useful, it would not print, probably because he thinks it is "shutting down" as it is said.  I don't know what to do next. I have even shut down the computer to see if that would do anything with the printer, but it did not help.  Printer flashing picture and said 'Shuttind Down.'  Help

  Hello musicmom,

  Welcome to the HP Forums! I understand your concerns with your Officejet J6450. Let's try some troubleshooting for this problem:

  Make sure that the printer is connected to a live wall, not a surge protector. This step is required because HP recommends this step, and it could potentially solve your problem.

  Then, try the printer reset. Instead, leave the power cord of the printer for more than 60 seconds.

  I would like to know how your progress.