HP 5510 printer - no ink coming out the new hp cartridge authentic

Similar Questions

• HP Deskjet 970Cse only prints red after the new color cartridge installed.

  HP Deskjet 970Cse only prints red after the new color cartridge installed. I use black HP 45 and HP 78 color. Both are new. I know the printer is an older model, but it works well a month ago.  Any help would be appreciated.

  Thank you for your help.  It was a faulty cartridge.  I pressed a white cloth on the ink source and only yellow and blue were visible, without red (magenta).  I've returned the fabric and cartridge in the store (with my receipt) and managed to get another canister... it worked!  Both cartridges have dates of expiry of 2016.  Glad I didn't have to spend time troubleshooting my printer.

• IF THE NEW COLOR CARTRIDGE IS INSERTED IN THE PRINTER TO SEE HOW LONG IT TAKES TO CARTRIDGE IS EMPTY.

  OUR HP PRINTER NAME IS J3608ALL ALL-IN-ONE HP OFFICEJET. PORT DOT4_001MODEL CB07QA. OUR OPERATING SYSTEM IS WINDOWS XP, IF THE NEW COLOR CARTRIDGE IS INSERTED IN THE PRINTER FOR HOW LONG TAKES IT FOR CARTRIDGE IS EMPTY. ALSO, PLEASE INFORM HOW MANY A4 PAGES CAN BE PRINTED NORMALLY WITH THIS CARTRIDGE.

  Hello ImranNagoor

  It depends on print quality settings what you use with the printer as well as other factors such as the HP cartridges. You can see the available black and tricolor cartridges available for Officejet J3608 at the following link, including the returns estimated for each Page. To use the least ink use quick project for a print quality.

  HP Suresupply (Officejet J3608)

  Also for more information about how we measure the ink Yield the article below.

  How to give inkjet HP measures page

• printer scan works only with the new windows 7

  upgrade windows xp to windows 7 with the new HP Omni 220PC. Have a printer HP C309g-m. To scan from the printer to the computer xp, I had to use the HP Solution Center. The printer works very well with the new windows 7 program and new computer. I install wireless. No problems with it. Today when I went to scan a document with the HP Solution Center (I thought I had to use as before), this message came.

  "HP Solution Center cannot work because your device installation is not complete. Please connect the usb cable, or rerun the installation for a network installation cd. If it does not complete the installation, or you do not have the cd, access the HP help files by clicking on the start menu. "Everything I did. My installation CD said I had a version of the latest update on the installation CD, it was of no use. I went to the HP site and find a download for the drivers updated etc. I downloaded and installed. (although I don't know whether or not it was a duplicate of the drivers of devices on windows 7 for this.) I checked Add/Remove programs to make sure that the printer and the hp solultion Center have been added to the programs. they are listed. I can always scan with

  the hp Solution Center. Should I not this program to scan with this new pc? How can I scan from my printer now? I even tried to click scan on the printer, then scan to computer. the message I got was 'Try from scan of compurer. Refer to the documentation for more details ".  To be sure, I'm all mixed up now. All I want is for my scan printer to work with my new pc.  Everything works well except that scan thing, may help me understand what to do?:  Thank you

  all fixed. has crossed my computer to start then click HP click HP and open list. Went to my printer-clicked on my printer and clicked on the icon list to see if it worked correctly. This is a problem with the drivers and a box popped up with directions on where and how to download and install the devices for windows 7.
  Done this and tested it and everything works fine now. (Ihad already tried the HP site for support and downloaded and installed the fix suggested for the problem, but it did not work). in any case, its fixed and I hope that if someone has a problem, this information will help you.

• OfficeJet J6450: No ink coming out

  Hello

  I hope that this printer, which has not been used over the years, still works. The fax jobs. And the scanner works. But when I try to print, not even the slightest blot of ink it will make on the page. The printer will be in the page and looks like going back printing of text, but every time makes none that this either ink comes on the page. The printer says I have low ink black and white, but a full color ink cartridge. (I have taken the cartridges out and put back them in, and every time he reads the same levels of ink.) It seems that there is ink in the cartridges, but, again, no ink, b & w or color, comes out.

  My question is: is there a chance that this printer will always print? I don't want to have to pay the heavy load of ink cartridges if it won't. Yet once, this printer has not been used over the years, so perhaps the ink cartridges have dried up or reached their expiry date? If anyone thinks that I still have a chance of getting this impression of thing, let me know. Thank you!

  Hi kilg,.

  I think that there is a high liklihood that the printer works again.  You may need to replace the ink cartridges.

  There is an ink cartridge, cleaning of the routines you can do as described in this document.

  Since the fax and the digitisation of works and the printer moves the page through as if it is printing - it seems that the mechanism is very good.

  Used in this printer ink cartridges have ink tank and the printhead built into the cartridge.  So when you replace it - it is brand new.

  You want to evaluate the price of the new cartridges compared to a new printer that will come with ink and a warranty.  I can't guarantee that the printer will work - so there is a risk.

  I wish you the best to do this work - or the picking of a new printer.

  Let me know if I can provide any additional information.

  Jean

• 8500 printer using ink because of the constant print alignment

  Did someone had problems with a printer HP 8500 constantly try to align the print heads?  It's the printer of the worst I have ever owned, not quite 2 years old and the ink is extremely expensive, it would be more profitable to the trash, and by a new printer.

  Hi there Katcora, welcome to the forums!

  I saw your post on your Officejet 8500 constantly running an alignment. It is usually a sign of the failure of print heads. I have a suggestion that might help, that is to clean the printhead manually.

  Check out this guide for the correct instructions: print head issues

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Thanks for posting in the community, have a nice day

• Photosmart 6515 does not print black ink after replaced the cartridge

  I am very frustrated! I can't get my Photosmart 6515 print black ink.

  Our school sends the documents by e-mail now that we have to print at home. Ideal for them, but not for me. They are usually in PDF format, so I do not have the ability to edit and change the blue color to print, either.

  I only use HP cartridges on this printer. I know it's more than a year, in order to call phone support will do no good.

  I replaced both cartridges and now it shows black ink completely full, but when I print the printer status report, black is not displayed. Black does not appear on the tool pages, either.

  I tried the command "clean printhead" several times. I unplugged and waited. I took all the cartridges. Connections look clean.

  What should I do to perform a partial reset or full?

  Hi Photokool,

  I understand that this has been a frustrating experience for you, and I want to help him.

  I will send you a private message, please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• HP7510: When you print photos they come out the right size.

  Today you have the printer and it works well with the output of good quality.  However if I try to print a MS Word document that contains a picture the photo comes out to about 120% of full size and overflows out of the page.  Any ideas?  I am an experienced user and have tried all the usual remedies.  OS is Windows 10 MS Word 2003 (yes I know it's old :-))

  @Bernard_S

  Odd.

  Rats.

  Office Word 2003 is no longer supported.  File Windows 10 libraries system files and the links that connect dependencies (programs needed by desktop software and printer) changed - 'something' may be missing or damaged.

  Regardless of the new file system Windows 10 and how he 'sees' a Word 2003 document, the question could be attributed to the program from the printer itself - a tiny missing statement which translates not correctly size the image, position, limits.

  One or more of the following could reverberate - results, of course, depend on the cause of the problem (still unknown).  If one of the changes to trigger a file change internal - or how the document and the image are translated by the printing software - while change can help solve the problem.

  Ideas - I hope that these apply to your Word Vintage:

  • If you have not done so, check the spacing of lines on each side of the image - Dragon document mention this (if I remember) provides an example.
  • Copy the image to a new name .jpg file > open the image in Paint (paint real, not 'fresh') > set up as if you are going to print and check the size, boundaries, the parameters.  Why use Paint instead of Picasso?  The painting is Windows.  Picasso is not.  If you want, print the image (although I doubt it will be necessary).  Place (insert) of the 'new' file in your document in place of the original image.
  • Try to temporarily remove the image > save close the document > open and insert the image in place.  If the image is small enough (fits left margins / right), left click on the image and use the arrows "decrease / increase indent ' to drag the image a little to one side or the other.
  • Turn on all the markings of the document - search for oddities.  Anchors in images could provide a clue about why the image is printing 'off limits '.
  • The value of the tight margins - print any of the pages on which is located the wandering image.
  • Copy the contents of the document in a WordPad document > save content > print a page that provides one of the problem images.  Check the result.
  • If you use fonts "bizarre" and maybe even if you don't do so, be sure that embed you the fonts in the document.
  • Setting word for Printing Options:

  Control Panel > display icon > devices and printers >

  Right-click Printer > Printing Preferences > tab Layout > advanced >

  On the printer side tab > preserve the page layout (select) Yes > OK

  • If all else fails, the document to a PDF output and printing that - or print the PDF file as an image.

  I've probably missed something - if I have 'find', I'll post back.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• HP Photosmart Premium C309: printer cannot print black ink (it's a new cartridge).

  Hi everyone, I hope someone can help me troubleshoot my printer.

  yesterday, I installed a brand new authentic ink cartridge of HP for printer HP C309 photosmart premium.

  The ink level for black on the printer is full, my other levels of color ink is low, but that should not affect something because I never print in black and white for the documents from the school.

  I tried to print black-and-white documents and the printer is fading the black in and out and sometimes not black at all, despite the fact that I have installed a new black ink cartridge.

  I tried:

  (1) align the printer cartridges through the tool on printer settings (this alignment failed 2 times, always without success)

  (2) cleaning of the print head through tool on printer settings (tried this 3 times and still no improvement)

  Any other suggestions?

  Hi @plutolover2011

  I want to help you to be able to print again. I understand your color cartridges work, but it's not black ink.  Please start with the procedure described in the following document; Printer prints a blank Page or does not print black or color ink for HP Photosmart Premium C309a the C309c all-in-One

  If you have performed all the steps in the document above and the problem persists, not one of HPs, my personal recommendation is to use the solution put forward in the next video.  I suggest that if the printhead and the printer he are out of warranty.  Hot water rinse printhead - HP ink printers of the series with removable head.

  I have recommended this solution to others and have been successful, but I can't guarantee that this will solve the problem, it is a term of type line of effort. I hope it helps.

  PaganC wrote:

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...

• Reconfiguring a printer wireless deskjet 3520 on the new network.

  Hello... I bought and installed my deskjet 3520 on my wireless network and 2 laptops about 1 week ago.

  Everything was fine but then a PC started refusing to connect to the network.

  Technical support to the Belkin unhooked all the network and uninstalled everything... then reconfigured a new wireless network. Call Net2.

  Access both the web very well on Net2 PC but the printer connects is no longer makes sense if he still thinks I'm on Net1.

  So... the question is... What is the best way to get the 3520 to be accessible on Net2 on BOTH computers.

  I didn't want to screw up whatever it either so have not tried whatever it is me again!

  I'm reasonably notified have the installation disc. Win7 operation on both computers. Wired ethernet connection available and can connect each PC with a USB stick if necessary... but really want to use both wireless. I also have original HP print and scan doctor installed from the installation process!

  Hope that helps and thanks in advance!

  No problem!

  When you post again, I'll check in.  I wish you the best in getting the printer is connected to the new configuration of the network.

  If you need assistance I am more than happy to help.  Have a wonderful and safe trip!

  Jason

• No printer in not listed in the new "connected HP.

  I just received an email inviting me to pass to connected HP ePrintCenter.  I did the upgrade and now I noticed that my printer is not listed on the devices tab, and I can't add it either.  Do I need to worry about this?  When I allowed for the 'upgrade' to connected HP, it sounded like everything would be transferred to the wire.

  I solved this by using a different e-mail account.  I don't know why, but HP connected disliked one of my emails, so I tried to use another messaging based on the web at the suggestion of another Member of the forum.  Well, who seems to have everything fixed.  All right.  I highly recommend that anyone who has problems with this to simply try to use another email account.

• Network printer will not work with the new router

  Just changed routers and now cannot print on Officejet Pro 8000 A809, which is connected to the router ethernet.  On Windows 7, download a message indicating that the printer 'cannot be contacted over the network.  Tried unplugging printer ethernet cords and power and reconnect the Self Test and Configuration network pages printed OK, but still cannot print.

  Before I saw this solution, I decided to try to uninstall and reinstall the printer.  It worked.

• slow printing in CS6 ID on the new iMac

  My HP Laserjet 1320 printing is very slow ID CS6 (V 8.0.1) and other Adobe apps on my new iMac running OS 10.11.6. About 4 to 5 minutes before printing begins, even on the pages of text only. Printing has been very good to CS6 on the same printer on the old computer, MacPro under Snow Leopard. The new and older computers have 8 GB of memory. Any ideas?

  InDesign CS6 only is not supported under El Capitan. You would be better advised to upgrade to InDesign CC2015.

• HP LaserJet P1102 CE651A does not recognize the new toner cartridge

  I installed a new hp for my Laserjet P1102 toner cartridge, but still get the message "install the black print cartridge"and the orange light blinks.  It worked fine until the toner ran out.  Have tried to reinstall the cartridge and you are using a compatible cartridge, without success.  Can I do, or do I have to repair the printer that appears to be a case to send far from a reconditioned unit?  I am disappointed that he didn't after intermittent use of less than 18 months. It was purchased as the reviews said it would be great for printing of volume, but I have not at this stage yet.

  Any ideas?

  I had the same problem. Remove all paper from the tray. Make sure that no paper is started in the printer. I then replaced the toner cartridge and it was recognized. It seems that if the paper is launched to feed into the printer, then the new toner is not recognized.