OfficeJet Pro 8600: HP OfficeJet Pro 8600 printing with blank!

Similar Questions

• My HP Officejet Pro L7680 print a blank page before every PDF print job

  My HP Officejet Pro L7680 print a blank page before every PDF print job, regardless if it's a PDF I create or a tht is sen for me.  All PDF files behave in the same way. The Document is good, but its annoying to have to go out the blank sheets and put back them in the printer.

  Hello @RMorley,

  Thank you for visiting the Forums from the HP Support! I understand that when you print pdf documents on your HP Officejet Pro L7680, it prints a blank page.

  There could be a few things gong here, we will make sure that you have not configured it to use a separator between the draw sheet:

  1. go to your devices and printers

  2. right-click on your JO L7680

  3. navigate to printing properties

  4. click on the Advanced tab

  5. click on the Separator Page

  It was empty or was there something put there? If something is listed here please delete and apply the changes.

  If there was no set of pages of separation, I would like to you to perform printing and scanning doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  The PSDR find something, let me know the results?

  If you still print the extra, please check the size of the paper, that is - this currently fixed at?

  Please let me the following information if you still get the blank page before prints:

  1. What is your current operating system, Windows or Mac and what version?

  2. What is the connected printer, USB or wireless?

  3. If you print from the internet or e-mail you get the blank page or documents?

  Thanks again,

• OfficeJet 4630: Problem printing with Officejet 4630

  I just replaced an OJ4620, who was not black printing, with a new OJ4630.  I am now having a problem with the OJ4630.

  It prints text most very well, but does not always print the Abobe reader messages.  I tried to install a printer driver for the 9800 without great success.  It seems that sometimes it will print the pages of Adobe, but most of the time will not.  I feel guest, and when I click on print, it does not appear that the message arrives at the printer.  The machine will then lock up and I'll have to reboot the system.  The thing that puzzles me is that sometimes the feeling will pass, but it doesn't seem to be a reason that I can understand why it happens.

  I never had this problem with the 4620, but he feels now.

  I have Adobe X and when I check the updates on the site, I thought there is not everything.

  Fran

  Hi @Fran47,

  Welcome to the HP Forums!

  I see that you have a problem with your HP Officejet 4630 of printing when using Adobe Reader on Windows 7. I'm happy to help you!

  A few questions for you:

  • What happens when you make multiple copies? Copy the text or mixed Documents.
  • What happens when you print from other programs, such as Notepad. (The same issue happen?)
  • How is the printer connected? USB or wireless?

  In the meantime, I suggest to try our HP print and Scan Doctorand see if that can solve the problem for you automatically.

  Hope to hear from you soon and thank you for posting!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP Officejet 6500 Wireless print with black ink

  HP Officejet Wireless 6500 won't print with black ink. This printer as worked perfectly for years. Now, all of a sudden, he leaves by using black ink. All other colors are working very well. Any ideas?

  I tried several cleanings and reset by pressing on # and 3 when turning the power on. Nothing works, but the ink levels are declining due to all the cleanings trying to get this thing to work.

  I have it!

  I have searched all over the internet for a solution to this problem. Some people have the right idea, but not how to implement it.

  Problem: Black ink doesn't print all colors print but not

  Reason: for black print head is clogged.

  Implementation of solution:

  Set 920 ink jet cartridges in cartridge print head which is held in place by small arm on the right side of the ink cartridges.

  1. remove all the ink cartridges. I didn't want them to dry, so I wrapped them in plastic wrap.

  2. lift the arm and remove the print head cartridge.

  3 rinse the WHOLE print HEAD under a stream of water. I know it sounds crazy, but it will work. I thought it was best to rinse all the (not only black) because if I did not then the ink left any color would dry up and clog in any case!

  4. I leave the printhead to dry for about an hour, BUT IT DOES NOT WORK. When I handed the printhead my 6500 gave me an error message that it could not find the head of printing or something like that. I thought I ruined which was the risk I was willing to take. I went online and searched for a replacement at low prices. I immediately ordered it. But I have excluded the old printhead to dry just in case it is water which made it unnecessary.

  5. four days later I received a new printhead. Before I opened the package I tried the old an new AND IT WORKED! First, I installed the old print head cartridge, then each of the inks. After having done that, the 6500 did the rest. He went on a very long print head cleaning and alignment. He gave me the message "Please wait. Printer preparation occurring. »

  6. when the cleaning and alignment end it automatically prints a test page. It didn't look perfect the first time, but it was close. The message I got was, 'success. Alignment with success. Recycle or discard the printed page. Press Ok to continue. "The problem was that the ink cartridges were emptied of this whole process, even though they had about half of the ink when I removed them left. I changed the ink cartridges and did a cleaning and a level 2 cleaning and alignment. It worked!

  7. because I could not return the new printhead that I am now in case of failure of the print head for another reason.

  I don't know how long it will take to dry print head after rinsing but I know works of 4 days. Perhaps a few days would have been sufficient. If someone does and less time please let others know here.

  If you don't have success using my method, at least you know it will solve a new printhead. I paid about $35 for a new.

  Good luck!!

• My officejet 7500 cannot print with my iphone

  My new officejet 7500 print with my iphone first days... but after I cancel some iphone the printer does print more.  you need to reset my printer?  I try to use another iphone... is the same...

  Hey kennethwk

  Here are some measures you can take to try to get your iPhones reprint

  1. Unplug your router and your printer from power. Cut your iPhone (completely off, not only locked.) Wait 30 seconds
  2. Plug in your router. Expect that your router is entirely online (usually takes 30 to 60 seconds)
  3. Plug your printer. Wait until it returns to its home screen
  4. Turn your iPhone
  5. Try to print

  Hope this helps, if not, let me know

• How to fix my PDF Pro to print a blank form?

  I use eCopy PDF Pro Office 6.1 I created fillable forms in front and was able to print with all their contents. However, now they are completely empty print - and only the content that is typed in the fields print.  Usually I create the form in Word template, save it as a PDF, then PDF Pro, I use the "FormTyper" option in "forms" - it automatically creates the form - I make changes (as the deletion of the text boxes where didn't need, expand a text box, etc.), and then I am able to print the blank form (print only the basic information) , or I am able to type in the fields and then print the full form.  Like I said before, now nothing prints except what is written in a field.  Please, any help would be GREAT!

  In the print dialog box, under the option "Comments and forms", make sure "Document" is selected, "are not only fields.

• OfficeJet pro 8600: printing with black cartridge only

  I just replaced the black ink cartridge (the other colors are exhausted and still in the machine) but I want to just print in black, but it won't let me - please advise

  This isn't what you want to hear, but you will need to replace the color cartridges as well.  The 8600 Pro Officejet has separate ink supplies and a replaceable (but expensive) print head.  If the printer works (in black only) with one or more color exhausted it can damage the print head.  To avoid damaging the printer hangs printing if one or several colors are exhausted.

• My Officejet Pro L7590 prints with lines across the copies? How to fix?

  Printer has run fine until lately.  Now it has lines across all copies printed.  Computer running Windows XP.  Both are uTD on software...  Tried cleaning with air presurized Copier, but made no difference.

  I can fix thins, or must it technician?

  Hello

  This article seems to cover the problem you are experiencing. Give the steps described a try and tell us if it helps.

  Good luck!

• OfficeJet Pro 8600 appears twice in the selection of drop down menu printer with each of the different names.

  Hello!

  I recently acquired an Officejet Pro 8600 and immediately connected to my network wireless as stated in the manual. No other type of connection has been used beforehand and the operating system is Windows 7 64 bit.

  After that the installation of the printer driver appears twice each time that a program asks me to select a printer from the drop of the printing devices in the typical menu of preparation of printing.

  There is an entry for "Officejet Pro 8600 (network)" and something in the sense of 'HP95CDN' (Officejet Pro 8600). I can't remember the exact names off the top of my head, but it is the name of the printer with the 'network' in brackets in one case and a kind of shortcut ID printer with full name in parentheses in the other case.

  According to the program, one of the options gives the desired impression while the other simply causes a queue of indelible impression for the name of the unit in question that is stuck to a few KB of data transmission.

  Usually printing works with the device with the identification of the printer in its name, but I recently had a case where with LibreOffice printing only works with the other choice.

  Can someone explain to me exactly means?

  See you soon,.

  Pete

  Direct entry Wireless will be visible under menu so direct wireless is on... However, since you are able to print another icon (not the network icon) I assume direct wireless is off coz you will not be able to print from wireless directly on the printer if you are connected to the router.
  
  I believe that the icon of the printer (not the network icon) has a port WSD assigned and is automatically detected by the operating system and installed.
  
  Go to service window and check if you have any input that says function Discovery Provider Host and see if it is started. Try to stop the service, and remove the icon of the printer (not the network icon) in the print server properties.
  
  Restart the PC and check if the icon comes back or try to uninstall and reinstall
  
  Let us know the result

• OfficeJet Pro 8600: Printer offline and HP Support for Windows 10 don't come upward

  I'm trying to scan pictures to my computer.  Have upgraded to windows 10. My printer is connected wifi.  I bring the printer in Control Panel, set up my printer and it says printer is offline.  Indications are no good they do not appear to be implemented for users windows 10. When I try to go to the hp support for windows 10, I have just a white screen.  I am very frustrated.  I can print to the printer, but he won't let me not scan to the computer, and that's what I need.

  Hi @Procats,

  Welcome to the HP Forums!

  I understand that you cannot scan on Windows 10, with your HP Officejet Pro 8600 printer. I'm happy to discuss this issue scan for you!

  Please, try the following steps:

  Check the connection of the printer on the network and troubleshoot any problems with the printer, router, installation or connection.

• OfficeJet pro 8600 printer-how to make this program work and installation?

  I have problems printing. I wonder how to ste it to the top and do work.

  Moved from feedback

  Original title; printer Officejet pro 8600

  Hi David,

  1. what operating system is installed?

  2. what security software is installed?

  You can go through the printer manual to know how to set up the printer and make it work.

  You can also refer to these items and check if that helps.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/How-do-I-install-printer-software-on-HP-OfficeJet-Pro-8600/TD-p/1123283

  http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=Forum-Board%3AInstall&q=OfficeJet+Pro+8600+printer

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• HP OFFICEJET PRO 8600 PRINTING GIBBERISH AT WINDOWS STARTUP

  Hi all!

  My name is Steve and I have a question. I apologize in advance if I'm duplicating this question from another thread.

  Our office has 3 computers connected to a router. The HP Officejet Pro 8600 is connected to the network. There is a problem with 2 of the calculated.

  The question is then 2 3 computers (1 running XP Professional, 1 running Windows 7 Professional are booted up (off) to the printer start printing gibberish and going to print until its cancellation.) Printing will start until Windows has loaded the login window (user account screen).

  Any suggestions? The major functions of printer for everything else.

  Hello

  We use the same previous printer cable. However, we can certainly try another cable. There is no problem printing with any of the programs that we use with the exception of one of them, (known compatibility issue).

  At this point, we don't know if the gibberish that prints to the windows startup is a problem with windows or perhaps the network.

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.

• HP Officejet Pro 8600: Printer does not print in color

  I just got the color cartridges refilled at Costco. Now, my printer does not print in color.  I printed out a diagnosis and cartridges are showing that they are full.  The actual color of magenta is a deep rose, so I know that some of the magenta is crossing. Cyan (blue) and yellow printed black on diagnostic tests.  I know that Costco filled cartridges with the appropriate color because I can see the color on/in the cartridge.  Suggestions on what to try? I bought the printer on January 27, 2013.

  Hi @monitons,

  Welcome to the Forums of HP Support!

  I see that your HP Officejet Pro 8600 printer will print correctly since fill you the ink cartridges. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you are experiencing.  It seems that there is a problem with the print head or ink cartridges.

  To determine the cause, I would like to use this document:

  • Fixing poor print quality

  If the problem persists, I suggest you try a new complete set of ink cartridges.

  How many times have you filled out the ink in these cartridges?

  TIP: Reloaded cartridges can stop functioning over time, if the nozzle one chip or ink is damaged.

  Note: HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP OfficeJet Pro 8600 more with Windows 8.1: failure to print double-sided

  Hello

  I recently bought a new laptop with Windows 8.1 software and unfortunately can not print any document double face of any program.  While I can easily print the documents double-sided on other computers running earlier versions of windows, it doesn't seem to be any option to do it at all on my laptop.

  I see that this problem has been resolved with the older versions of windows, but solutions are not easy to follow in windows 8.1. Here are my stats from the printer and thanks a lot for your help!

  printer: HP OfficeJet Pro 8600 Plus

  OS: Windows 8.1

  Connected via wifi

  Hi duneser,

  I understand that you have a problem with duplexing in Windows 8.1. I'll try my best to help you solve this problem.

  Because the printer print double-sided on the lower version of Windows, it may be the software and drivers installed on the Windows 8.1.  I suggest to uninstall the printer software , then using the printer HP install wizard for Windows to install. This tool will search for the right software and drivers to install for your printer.

  Once you have reinstalled here is a document for printing on both sides of the paper (duplex printing) with adjustment steps upwards and double-sided printing.

  I hope this helps, let me know how it goes.

  Thank you