OfficeJet Pro 8600 Wifi question

Similar Questions

• OfficeJet Pro 8600 Printhead question

  I bought the Officejet Pro 8600 Plus about a year, and recently the impression was very bad.  I have a lot of horizontal gaps in the photos (color and b & w) as well as in the text.  It is not as crisp as it was when I bought it first.  I use it to write contracts and lately, had to go to the local Kinkos to print that it is not acceptable to give to a potential customer.  I installed the ink HP geniune.  I have tried cleaning the print heads through the tool on the printer, but also download and trying to solve the matter through 'hardware diagnostic tool.'  I always feel the lines of streaks / missing.  According to the report stage of my printer, I only printed 1 266 pages.  I have a hard time to believe that after just as many pages the print head has been overworked or put in his time.  I looked up the cost of a new print head, and at almost half the price of a new printer, I have a hard time to justify the expense.  I really like the printer and won't replace it.  I hope it's just a defective print head that may be covered in some way, or could be replaced at a more reasonable price.

  Opportunities, ideas or recommendations would be greatly appreciated.

  I should probably post that I had contacted HP, even if the printer is out of warranty.  I think what saved me was that I was able to pull up my impression of total, I think it was a little more than 1 000.  Obviously a very small amout of draw has been done during the time period.  They were able to send me a new print head, with instructions on how to replace or envelope pre-paid to send the back of an old man.  Touch wood, no problem since then, and I know I have printed a lot more during this period without any problem.

• OfficeJet Pro 8600-COPY Question

  How to copy a page 2 faces on a page?  In other words, 2 face 2 face...

  Hello

  Please specify the exact printer model:

  The HP Officejet Pro 8600 (N911a) do not provide duplex ADF to scan a two-sided original, but only print double-sided.

  The HP Officejet Pro 8600 Plus (N911g) / Premium (N911n) however do not provide this feature.

  If your product is the Plus or Premium models, follow the steps below:

  In the main menu printer, click the copy.

  Double as original copy / 2 sides 2 sides and perform the copy job.

  Kind regards

  Shlomi

• OfficeJet Pro 8600 Plus question (s)

  Product: HP OfficeJet Pro 8600 more

  OS: Win7x64

  Error Msg: B86ECEF4

  No change

  Brought this puppy home, it is out of the box. followed the instructions (removed all the pieces of Ribbon or protection). Cord plugged. Press the power button.  HP logo comes up, is there for about 3-4 min. one blue screen (blue screen of the window thinking of death which lasts 2 seconds), gives me this code B86ECEF4. Goes to a white screen with 7 icons are flashing (1 blue, 1 red, 5 whites) on the LCD screen. Wireless blue blink, the 'X' red, white is at home? , < and=""> and the back button. Start button / stop also flashes green. No internal sounds. If I move the door down (where I would put the ink of the cart, nothing moves out there.

  Any ideas. Defective? You missed a step?

  It seems that you will have to Contact HP for warranty repair.  If you live in the United States, call 1-800-HPINVENt

• OfficeJet Pro 8600 Premium: OfficeJet Pro 8600 Premium - questions of print head

  Turning my printer this morning the display shows an error message "ink system failure".  I followed the instructions to reset 3 times with no luck.  I still get the same message.  I spent 2 hours on the HP parts store, trying to find a replacement printhead with no luck.  Where can I find the correct print head, ref replace, etc. so I can get this printer working again?

  Welcome to the HP Forums @tntipsy,

  I came across your post on the message 'Ink system failure' you see on your premium 8600 Officejet and troubleshooting, you have tried and are currently looking for a new printhead. My personal suggestion would be for you to contact HP directly to discuss a printhead or even a replacement unit. I would honestly suggested a replacement unit on a replacement of the print head, just in case where the same problem occurs with another print head. Details of HP are below for you!

  If you have trouble, let me know and I'll do my best to help.

  Click on the "Accept as Solution" If the issue reached a resolution! Hit thumbs up below like my post or show thanks to me to lend a hand!

  Have a nice day

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• HP Officejet Pro 8600 N911g: HP Officejet Pro 8600 N911g Question add GMAIL SMTP

  Hello

  I want to have 2 shippers when I scan to email.

  My GMAIl SMTP works perectly.

  Those of my wife at all (test KO).

  Of course, I tried/retried the login/password, the firmware update (printer is up-to-date)

  I also tried tab setting (via web print server) the option "mail server". I filled SMTP ID my wife and it worked. (Test OK)

  Where is the problem?

  Thanks in advance for your comments

  Marc

  Hello
  Gmail offers several options of security which are not supported by the printer and it will block to connect to their servers.

  First, open the following link and ensure that you are connected to the same account that you are facing problems of implementation.
  https://myaccount.Google.com/

  In the section connection & security click on signature in Google and make sure 'The 2-Step check' is defined as 'Off '.

  In the left pane click on connected applications & sites and make sure that 'Access to less secure applications' is defined as 'ON', otherwise the check fails.

  In the left pane click peripheral activity & notifications, within the "security events" section click on the link to control events and make sure there is no connection blocked attempt (it will be highlighted in red), if there is no warning, proceed to the screen to ensure there is no block for this device.

  Once you are running a test for the outgoing user profile and check if the problem resolved.

  Kind regards
  Shlomi

• HP Officejet Pro 8600 Plus questions

  I accidentally activated the Firewall setting on the interface based on the web of my printer and print now and can not connect to the printer to its IP 192.168.1.254 (I assign a fixed IP to make it work with my VDSL Huewei router which is a dog - separate issue.

  How can I disable the firewall on the printer?

  Hi @RedRoscoe

  I think that the best approach is to restore network defaults, and then reconnect the printer again.

  1. On the Control Panel, press the symbol wireless

• HP Officejet Pro 8600: No Wifi connection between the computer laptop and HP printer

  Hi, I just added W10 os for my laptop, I was on os W7, work system very well, my printer is Office Jet Pro 8600, both laptop and printer are connected to my wireless router, but my laptop cannot find my printer, I misplaced my original disc, can anyone advise me on what it takes to please. TIA

  Hi @Rockabilly,

  I was able to locate the software you're looking for, but from your description, not having is not the software may not be the question. I will first provide you with the software, then if you continue to have problems, let me know and we can go from there.

  Printers HP Officejet Pro 8600 Plus and Premium e-All-in-One

  E-all-in-one printer, HP Officejet Pro 8600 - N911a

  Alternatively, you can also download and run the HP printer install wizard for Windows

  The HP printer for window installation wizard was created to help users download and install the latest and most appropriate HP software solution for their HP printer.

• cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet

  I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer.  It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.

  Any help is appreciated!

  Hello NRHII,

  Welcome to the HP Forums!

  I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:

  (1) turn off your printer
  (2) unplug the power cord at the back of the router
  (3) restart your computer
  (4) wait less than 60 seconds, reconnect the power cord to the router
  (5) turn the printer, wait for the computer to turn on

  The wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)

  1. On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
  2. Tap the Installer icon ( ).
  3. Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
  4. Tap the name of your network and then press OK .
  5. If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.

• More OfficeJet Pro 8600 - Question scan

  Hello

  I recently bought a new HP OfficeJet Pro 8600 Plus printer.  When I scan a document, it is automatically saved in the folder "My Documents" on my PC.  Is it possible to redirect the scans to another folder?

  Thank you

  You can change the target to be analyzed as follows:

  1. From the desktop, click the HP Officejet Pro 8600 .
  2. In the framework Of Actions of Scanner, click scan a Document or Photo.
  3. Select the shortcut used to scan from the left pane, and then click Advanced settings.
  4. Enter the Destination tab.
  5. Click Browse, select the target location to save, and click OK.
  6. Close a window of the HP software and try scanning using the modified shortcut, the analysis should be save into the configured location.

  I also provide information on how to scan on the control panel.

  Please see click on hyperlink below:

  http://support.HP.com/us-en/document/c02921272

  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give a Kudos!
  I work for HP. The answer is my personal opinion and not HP

• ANALYSIS QUESTION - OFFICEJET PRO 8600 - ALL-IN-ONE

  I HAVE A HP OFFICEJET PRO 8600 PREMIUM E ALL IN ONE-N911N PRINTER.  I have
  HAS RECENTLY HAD SOME PROBLEMS WITH THE SOFTWARE/DRIVERS DESKTOP, WHERE THE
  SOFTWARE DOES NOT OPEN ON MY DESTOP.  I CONTACTED HP TECHNICAL SUPPORT. THEY
  TOOK CONTROL OF MY DESKTOP AND MY SOFTWARE HAS DETERMINED COULD HAVE BECOME
  CORUPTED AND SO DOWNLOADED FROM THE HP WEB SITE LATER
  THE OFFICEJET 8600/DRIVERS SOFTWARE VERSION, AND THAT SEEMED TO
  SOLVE MY PROBLEMS, UNTIL I DISCOVERED WHAT I BELIEVE, IT IS A BUG OR HAS
  SERVICE CAPACITY FORGOTTEN WHEN SCANNING BY USING THE MOST RECENT SCANNING
  SOFTWARE.   THE QUESTION IS, WHEN YOU USE THE 8600 DESKTOP SOFTWARE TO ANALYZE
  A DOCUMENT: IF I SCAN A FEW PAGES USING THE DOCUMENT FEEDER, THEN,.
  BEFORE I SAVE THE FILE, I WOULD LIKE TO ADD ANOTHER PAGE SCANNED, TO THIS
  SAME FILE, BUT YOU WANT TO ADD THIS EXTRA PAGE USING THE FLAT GLASS
  (NOT THE DOCUMENT FEEDER), THE SOFTWARE NOT ME LETS NOT DO THAT. THE
  SCANNING SOFTWARE IS ALWAYS LOOKING FOR THE PAGE EXTRA (S) TO BE
  ADDED, COMING THROUGH THE DOCUMENT FEEDER (SOFTWARE ONLY)
  RECOGNIZE ADDITIONAL PAGES TO COME FROM ANOTHER SOURCE, OTHER THAN
  FROM THE SAME SOURCE YOU STARTED SCANNING WITH). I'VE ALWAYS BEEN ABLE TO
  DO THIS WITH MY OLDER VERSION OF THE DESKTOP SOFTWARE (CD VERSION ONLY)
  CAME WITH MY PRODUCT), BUT SINCE I DOWNLOADED THE LATEST VERSION, IT
  DON'T ME LETS NOT START SCANNING OF A DOCUMENT FROM A SINGLE SOURCE (DOCUMENT
  FEEDER OR FLAT) AND ADD EXTRA FROM ANOTHER SOURCE () PAGES
  CHARGER DOCUMENTS OR FLAT).  IS THERE A BUG IN THE SOFTWARE?  TO
  SUMMARIZE THE PROBLEM: WHEN YOU START A SCAN USING THE DOCUMENT FEEDER.
  WANT TO ADD ANOTHER PAGE SCANNED ON THE GLASS FLAT, THEN
  SAVE ALL PAGES SCANNED IN A FILE?  YOU CAN'T DO THAT WITH THE MOST RECENT
  SOFTWARE (DOWNLOADED FROM HP WEBSITE), BUT YOU CAN THE MAKE WITH THE
  CD VERSION OVER OLD ONES. IS THIS FEATURE MISSING FROM MOST RECENT SOFTWARE?

  OK, the new SW to use can be found here:

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Download and install this.  This will install an application on your system, called "HP Scan" extended.   This software is designed to work with any recent HP scanner that has already installed the drivers.    The software does not replace your existing HP Scan supplied with the appliance.  It is rather an alternative which offers many more features than what came with your device originally.    This software is already available with the new HP machines.

  The selection of the default source is 'Use document feeder so burdened', so you should be able to scan from the ADF or flat all in one session.

  Enjoy!

• Using configured WiFi Officejet Pro 8600 in a location no-wifi via USB

  My Officejet Pro 8600 is used at home via WiFi.

  I want to take the printer to a location which does not have WiFi and print via the USB port.

  The installation disc (v28.8) has mutually exclusive options when you run Setup.exe,

  for the WiFi, or USB / Ethernet.  How to install a printer driver for printing via

  USB, while keeping the WiFi driver installed?

  OK I see that now when printing there is selections for 'HP Officejet Pro 8600' and

  "HP Officejet Pro 8600 (network)".  I have not seen in a first time.  Problem solved.

• Question on Officejet Pro 8600

  Just replaced a Photosmart 2410 with a new Pro 8600. Immediately, I noticed a lot of paper options are missing such as paper photo 4 X 6 with detachable tongue and specific photo matte paper. Of course, I can bypass the minor inconvenience, but I wonder if the options available can be upgraded via software download? Thanks for any information.

  Hello

  I understand that you have just a few questions about the difference in the options of paper between your Photosmart 2410 and your new Officejet Pro 8600. I will do my best to answer these questions for you!

  The differences will not be downloadable for you. Essentially the differences result from your first printer is a Photosmart that was made to print photos as the 8600 Officejet is geared more towards printing needs. The Photosmart printer is designed to print photo would certainly more photo options. If it's a major inconvenience for you I would definitely suggest to see if there is any chance to exchange your active printer for a Photosmart but if it's only a minor inconvenience to stick with the 8600 and save you some hassle.

  Hope this helps, have a nice day!

• HP Officejet Pro 8600 Premium print cover stock (67 lb) question

  HP Officejet Pro 8600 Premium

  "out of paper"

  The printer's paper. Check the paper tray and add more paper if necessary to continue printing.

  I try to print from Tray 1 cover. How to make adjustments so that it can print or is there a store bypass on this printer that I can't find.

  The sales representative told me when I bought this product I was able to print stock coverage.

  Help!

  You shouldn't have any problems with the documents in your list. You did to be sure you choose the correct paper type before printing? The product can capture not paper if the type in the tray and paper format does not match the size settings and type in the print driver. Heres how to check the paper type is defined:

  1. Return to the document that you were trying to print when the problem occurred.

• HP Officejet Pro 8600 e-All-in: similar question: not able to 'change the Scan tasks '.

  I have a similar problem as "ccb531", released 23/07/2015 08:22. I am unable to "Change Scan tasks" with the HP utility software. It gives the dialog box box below I need to install "HP scanning software".

  

  I installed the driver (alone) which is available on the site of HP support for my printer (HP Officejet Pro 8600 - N911a) and my operating system OSX 10.11.1 (El Capitan).

  I also followed the procedure that has been described by the support team in the post of 'ccb531', published 23/07/2015 08:22. That is to reset the printing system,uninstall the drivers and software, (repair your disk permissions is not longer available on osx 10.11), install all updates Apple and reinstall your software and drivers. But with the same result.

  Have I missed any other driver that is not listed on the support site or is the HP Easy Start on 18 November 2015 2.1.0.66 driver not yet fully functional for El Capitan?

  Any help would be much appreciated since I can't change the scanning resolution when scanning my documents on computer from my printer document feeder if the documents are too large to be useful.

  Thank you.

  Hello

  Install the HP Easy Scan app below, then try to change the scan tasks once more:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Shlomi