OfficeJet Pro k550: copy print task Quick Sets of Win7 for Win10

Similar Questions

• OfficeJet Pro K550 C8157A: officejet Pro K replace rollers

  I have owned and personally used this printer since May 2006.  To me, that reliever rolls are hardening and not to pick up the paper in the tray correctly.  I found a source for the rolls, however I don't have a manual that will provide guidance to replace the rollers.  Do you have a source for the maintenance and repair of the printer?

  Hello @Wellspring-306.

  Thank you for your participation in the Forums of HP Support! After reading your post I see that you want an interview guide to replace the rollers in the printer. I want to help you with this issue today.

  Are only a few guides that are available, but there is no one for the interview guides for the replacement of the printer parts.

  Source: HP Officejet Pro K550 color printer series.

  You can contact HP customer care to find out what service or the recovery options are available. Check the model number and the form to receive a file number for faster assistance. If you need help with getting the number, just enter your location and I can watch it for you.

  If you appreciate my efforts, please click on the "Thumbs up" button below. See you soon!

• HP Officejet Pro K550: Software to clean the print head

  I need tool box for old HP printer: HP Officejet Pro K550, for 10-64 bit Windows.
  I need a software tool to clean the print head!

  Hello

  The HP Toolbox software is no longer available for your printer for any later OS such as Windows 7, 8 or 10:

  http://support.HP.com/in-en/document/c03467279

  You can align, clean and calibrate the printhead from the printer itself by using key press combinations.

  See page 33 on its manul below to perform all the tasks of cleaning for the front panel of the printer, such as the cleaning of the printheads:

  http://h10032.www1.HP.com/CTG/manual/c00501024.PDF

  Kind regards

  Shlomi

• How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?

  How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?  I'm running on Windows 7 64 bit.

  It's strange.  Looks like you have a second paper tray and put it to the default tray.  The second paper tray only supports the types of paper that show on your list.  It's strange because unless you have purchased a second tray paper, plus model has one.  Does only the high-end model.  Other than that, only certain types of media can be duplex, so if you have double-sided printing, it can limit the selection.  I'll watch what else could be the cause and get back to you.

• Gray printing Officejet Pro K550 problems

  Hello.

  I use a HP Officejet Pro K550 (STD) as well as a new Acer Veriton PC, equipped of Windows 7 Professional 64-bit O.S.

  For normal printing, up to today, it works well, but they are a couple of days, instead, if I print an image, by selecting the "Gray Scale" - high quality option in the printer properties, everything that fate, causing printed in RED scale!

  If instead, I select 'Gray Scale - only black ink', it prints normally.

  What is going on?

  The cartridges are always at the right level (Black XL just replaced) and even after using the utility Scan Doctor, it seems everything is OK... but this isn't reallly so OK.

  What can you tell me?

  I have to print several copies in the next few days and wouldn't no more free time, paper and inks...

  Thanks for the help!

  Hi robevix,

  Welcome to the Forums of HP consumer printer.

  When using gray scale - high quality, he used some color to enhance black. You can browse some general troubleshooting that might help solve the problem:

  http://support.HP.com/us-en/document/c01956550

• My blue ink in HP Officejet Pro K550 does not print, even though I tried to put in a new cartridge.

  My Officejet Pro K 550 printer, has lost its ability to print blue ink, but I tried to change the cartridge. Other colours and black work well.  Can you give me any advice as to what may be wrong?

  Hi Linda,.

  I found some of my colleagues who have worked on this printer. There are some things to try, however, it is not all good news.

  The engineer estimated that on the print head nozzles may be clogged for 2 reasons. The first is that there is only some residue ink. Here's what he said: "perhaps you can suggest to the customer to try to remove the print head (just the print head which has cyan nozzles), use a cotton pad or damp cloth to clean the residue of ink around the nozzle. Replace the printhead, and then do the cleaning sequence that the manual says. This procedure might be able to recover some scenarios of nozzle clog, but he's going to use up little ink. »

  However, it may be that air took the print head: '. '. If the print head is deprimed, that means air penetrated in a certain room after turning on which can never be purged, causing not able to sink more ink. In these cases, I think that the print head should be replaced. »

  The engineer also spoke with assurance of customer, who believes that this particular product is past its end of life, which means that it is technically longer than Hp designed to operate. I know that you only had 3 years, but you want to be aware of this.

  Karen

• OfficeJet Pro L7590 can print but not scan

  My printer (Officejet Pro L7590) can print and copy correctly, but the scan function - that has worked well at the same time - has just up and stop working, and my attempts to solve the problem simply go round.

  • When I try to scan using the button start scan on the printer, I get an error message saying 'no scan options '.
  • When I try to open the solution Center, it is said that he cannot run because the installation is not complete.
  • Uninstalling and reinstalling the software (latest version, which is three years, downloaded from the HP website) do not work. The software seems to go through the process of installation very well, but crashes on the stage finish ("product configuration"). Eventually it times out.
  • Once in this case, the installer downloads a supposed solution of the HP Web site. He told me that it is fixing the problem and asks me to restart the computer, saying it will continue after the restart. After I restart, the procedure does not continue, and the problem is not fixed - all the behaviors I describe above are still occurring.
  • Also downloaded one file with other solutions supposed to this question. They do not work. For the most part, they are variations on "run the setup software again", preceded by various other measures. However, when I do this, it re-not installing - it is a completely different window, and if I try to go back to the installation procedure, he refuses, telling me the software is already installed. (And yet when I try to open the solution Center, he always tells me it is not installed.)
  • Tonight is the third time I tried to troubleshoot it. On three occasions, I just gave up in frustration after a few variations of the cover above.
  • I'm this end =><= to="" going="" all="" office="" space="" on="" this="" printer="" and="" getting="" a="" new="" one="" based="" on="" the="" abhp="" principle="" -="">Anything But HP.

  I can't emphasize enough that it worked in the past and this basis still printing very well (with the exception of some strange problems with certain PDF files), but scanning has broken since my last round of hardware upgrades and refuses to be fixed.

  It's incredibly frustrating. Someone just make it work with minimal BS, as he has done before.

  I realize, this is a follow up very, very late, but apparently the problem has something to do with the 32-bit version of Windows 7 running. I recently installed the 64 bit version and now have no problem with any HP software.

  Well, except that sometimes he asked my permission to do an update then fails to actually download the update (I get the same "could not connect to content url" error message that many others reported here).

  Other than that, which is slightly annoying, but doesn't really affect what anyone, everything works fine now.

• HP Officejet Pro 8600 Plus: HP Officejet Pro 8600 Plus printer-

  HP Officejet Pro 8600 Plus printer-

  Tried to copy both sides of a vehicle using ADF permit; paper too small (stupid user!); he copied the first side successfully. Now, I can't find the input document! How can I remove paper (which I can't find) which was too small for the auto feed?  It is not in the duplex unit, either.

  Hi @Dick_27,

  Welcome to the HP Forums!

  I appreciate that you try to remove the paper in your printer more HP Officejet 8600. I'm sorry to hear that, but happy to help!

  Please have a look through this guide, A display of the "Paper jam" error on the HP Officejet Pro 8600 e-all-in-one printer series.

  As well as this guide. The ADF (ADF) documents didn't pick up paper.

  I hope that these guides are useful and have a nice day!

• My HP Officejet Pro 8600 cannot print from my MacBook Air

  Hello

  My HP Officejet Pro 8600 cannot print from my MacBook Air. It keeps on showing "the printer is not connected", but the display on the printer connected. I often reset the printer "EVERY TIME" I want to use. I also tried to turn off my laptop and printer several times before printing. If I'm lucky, it will work maybe for one or two prints. If no luck then I have to reset everything again. Sometimes I reset the printer, the printer is not displayed on my selection.

  Hello boojoo1tw,

  Welcome to the HP Forums!

  I understand that you are unable to print most of the time with your Officejet 8600. How is the printer connected? USB or wireless? What is your operating system on your Mac computer? Click here to find out.

  If your wireless printer, then I recommend the award of an 'IP address' by following this HP document on printer does not maintain the wireless connection.

  Please post your results, I'll be looking forward to hear from you.

• HP Officejet Pro 8000 Wireless: Download for Officejet Pro 8000 Wireless printer driver

  I've been looking for a printer driver download for my HP Officejet Pro 8000 Wireless printer, but unable to find one and the web page keeps just leading me in circles.  I'm under IE 9.0 and Windows 7 Professional.  Could you give a link to download the driver?

  See this:

  http://support.HP.com/us-en/document/c02266980

  or

  http://support.HP.com/us-en/document/c02693964

• HP OfficeJet Pro 8600, HP printer wizard installs not when the software is installed from the CD

  HP Officejet Pro 8600 e printer all in one

  Windows 7

  I had Assistant printer installed and working on my computer at least a year, then there was an update and it no longer works.

  I uninstalled the device and the software and reinstalled both on-site and directly from the CD without success.

  The only error I get is when I start everything first install it and there is a red "x" next to the update of windows.

  The installation process ends, the computer will recognize the printer and I am able to print but I have no control any function because none of these options in the wizard for the printer are turned on.  They are all grayed out.   The most important thing I need is the archiving of received faxes.

  Someone else in my family had the same problem, but was able to reinstall from the Web site and doesn't have any more problems.

  Thanks for any help.

  Hi liluno18,

  I want to help you with this question. I send you this link to the Microsoft forum on how to fix the red X on windows update. Follow the response from Joseph M.

  So I suggest you do a complete uninstall software of the JO 8600 and reinstalling the software once you have windows update works again.

  Let me know if you need help, I would be happy to help you.

• HP Officejet Pro 8000 Wireless printer: Always be streak on copies vertical white

  HP Officejet Pro 8000 Wireless printer: Still get a vertical white streak down the photos. I changed the yellow/black printhead. Only one aid note said I should try to clean the scanner glass. Where is the scanner glass, and how to do for her?

  Other options to get rid of the vertical line?  Thank you.

  Hello

  It sounds like a problem with the printer itself, because it is indeed a vertical GIS. A cartridge problem would cause a horizontal issue. You can tru is the cleaning of transport, stem from the metal bar that you see in the printer, and carefully clean the Strip transparant. This with a lot of attention that its rather delicate and if it breaks the device is ready for the trash.

• 8600 officejet pro to only print in black and white only

  How can I configure my 8600 officejet pro to only print in black and white automatically so I don't have to authorize whenever I print?

  Hi Andrewbono,

  You're welcome, I'm glad we were able to fix everything together!

  If you feel that one of my suggestions brought you a solution please feel free to mark it as an acceptable Solution to facilitate advice for others to find.

  Whatever it is, it was a pleasure to work with you and wish you a great week

• Cannot install hp officejet pro 8500 A909a printer using a disc. Get error "error-windows 7. hta is not a valid win32 application".

  Receive this consignment of error when you try to use a CD-ROM to start re - install hp officejet pro 8500 A909a printer.

  Error-windows 7. hta is not a valid win32 application.
  Help, please
   
  Original title: 64-bit Windows 7 pofessional

  Hello

  1 are you getting this error when trying to install the drivers for the printer from the CD?

  2. what exactly is the problem that you are facing with the printer?

  This problem may occur if the files on the CD are corrupt. You can download the current "Full Feature" software and drivers from the HP Web site at: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=3752456&

  You can also contact the HP support forum to get help:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3752456

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• HP Officejet Pro K550: HP Officejet printing only in yellow

  Despite the change of all cartridges in my HP Officejet Pro 550 k, I can't get the printer to print in uneven yellow?  I have reset the printheads several times and it has not solved the problem

  Does anyone have any suggestions

  Welcome to the @karandy forums

  I read about the issues you are having with your Officejet K550 printer because it is only print Yellow ink in clumps. As you have already changed the ink, I wouldn't recommend this even once and unfortunately looks like an internal malfunction. However, please always try the rest of the troubleshooting steps in the guide that I found for you below.

  If the problem persists, call HP directly to discuss your printer options.

  Missing colors in printing

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Happy Thursday!