OfficeJet Pro L7580 appears as a network drive in Win7

Similar Questions

• I can't find a driver for HP Officejet Pro L7580.

  Updated my system to Windows 7 after years of using Vista.  Now, I can not use my HP Officejet Pro L7580 because it cannot find a driver to install.   Each tab has said that the device works perfectly.  I deleted all of the HP software... it off... rebooted... reloaded and still the message says that this driver is missing and it can't find on the site of HP.  He also said that he is not allowed to update the drivers.  During the audit in this area... that's bad.  Updates are always automatic without authorization by this tab, you open to change the settings.  I can't see the problem/solution... can anyone else?

  Hey there,

  Make sure you first if you use Windows 7 32-bit or 64-bit then follow this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=2512008&

  If you choose the recommended base or full software driver are the official drivers from HP for the product.

  I hope this helps!

• OfficeJet Pro l7580 on Windows 8: always impossible to install driver

  Reopening of the question of: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officejet-Pro-l7580-on-Windows-8-canno...

  Try to install the full 64-bit of Windows 8 funtion driver to restore the analysis features

  OfficeJet Pro l7580 (connected ethernet)

  Windows 8 64 bit (clean install)

  Driver from here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110039-1&cc=us&dlc=en&lc=en...

  Everything worked fine on Win7 64 bit

  Print with 8 default windows driver

  When you install the driver, the driver installation tells me to "uninstall L7300.

  I do not have a L7300, and the printer's ethernet, not USB connected.  I unplugged from the wall and ethernet, but can not go past this error message to install the complete driver.

  I've tried it on 2 computers different windows 8, with the same result.  The driver seems to be fairly broken

  Hi mcevoys,

  I understand that they are freshly installed operating system, but in order for me to isolate as a cause as possible, should be done on at least one of the computers. If you do not want to perform the update to help isolate the problem, then you will need to contact support to see what they can do to help you get this printer is installed on your computer. I would like to know what you want to do?

  Do a Refresh of Windows 8:

  1. hold your mouse at the bottom or at the top right of the screen (if you have a touch screen, you can drag your finger to the right of the screen to the left) to bring up the bar of charms.
  2. click on settings.
  3. click on "change computer setting" below.
  4. click on general.
  5 scroll down to "Refresh your PC without affecting your files" and click on "Get Started" after that.
  6. who should start a wizard that will take you through the update process.
  7. install the printer on your computer

• OfficeJet Pro l7580 on Windows 8: cannot install the driver

  Try to install the full 64-bit of Windows 8 funtion driver to restore the analysis features

  OfficeJet Pro l7580 (connected ethernet)

  Windows 8 64 bit (clean install)

  Everything worked fine on Win7 64 bit

  Print with 8 default windows driver

  When you install the driver, the driver installation tells me to "uninstall L7300.

  I do not have a L7300, and the printer's ethernet, not USB connected.  I unplugged from the wall and ethernet, but can not go past this error message to install the complete driver.

  The driver might be broken, but I am betting that Windows 8 regenerate the problem will be solved.

  Do a Refresh of Windows 8:

  1. Stand the mouse at the bottom or top right of the screen (if you have a touchscreen, you can slide your finger to the right of the screen to the left) to bring up the bar of charms.
  2. Click settings.
  3. Click on ' change computer setting "below.
  4. Click general.
  5. Scroll down to "Refresh your PC without affecting your files" and click on "Get Started" after that.
  6. Who should start a wizard that will guide you through the update process.

• OfficeJet Pro L7580 will not hold settings network by hand... not visible on the network

  Yes... Once again... Another question about the famous OfficeJet Pro L7580 all in one.

  I can't write all the IP settings and get the machine to save.  No matter how many times I try, it's always defaults to "automatic" and when I print the network settings page I get all the relevant numbers as 0.0.0.0.  I tried the network diagnostic tool, I have read all the instructions, I am a network expert.  I searched this problem on Google and all I see is to throw this thing in the trash.

  I also downloaded the official patch from HP for Windows 7 64 bit network, but when I try to run this fix, it is said that the patch is not provided for Windows 7.

  Should I trash this thing or is there a fix. ?

  Thank you

  Thank you

• Please HELP WITH OFFICEJET PRO L7580 - HP Imaging Device Software Funstions for Windows Vista

  I have a HP Officejet Pro L7580 - connection with laptop Dell and Windows Vista PC.  I did not have printing problems, but has been unable to fax or scan.  I uninstalled the software and put back in place to make sure I had the latest software and compatibility for Vista.  I can now fax but when I try to scan, I get the following error: No analysis Options - refer to device documentation to troubleshoot issues - only, there is no documentation of the device...

  When I went to the HP site to install the latest version of the software, I've installed the full functionality & driver software... guess I thought that this would have everything that I need, but it seems that the software of HP Imaging Device functions was not installed...

  If anyone has had this problem and what should I do now?  Thanks much for any help you can offer!

  Please texasgirl try this:

  http://support.HP.com/us-en/document/c04134999

  Good luck.

• HP Officejet Pro L7580 - HP Scan program works only on Mac OS Mavericks 10.9.2

  Hello there Support HP,

  I can not open HP Scan on my Macbook Pro / Mac OS Mavericks 10.9.2.  I have a HP Officejet Pro L7580. Scanning HP program / app just will not open.  I just scan them with my printer, like I did with my other Mac computer that still works on Mountain Lion.

  I would like to reinstall my HP software (HP Scan / to see if that would solve the problem but I can't find the software online.) It's all in your site is the HP-Printer-Driver Update - Patch_v1.0.0, but who has not solved.

  Please let me know if HP has a "HP Scan" for the Mavericks working update for my HP Officejet Pro L7580.

  I would really appreciate it!

  See you soon,.

  TS

  Hi tsmadlucky,

  Thanks for the reply!

  You are the very welcome, I'm glad it's a viable solution for you

  If you don't mind, would you be able to score my post as an acceptable Solution? That way anyone with the same issue can find the thread more easily if it is resolved. If you don't that's fine, that it has never hurts to ask

  Wish you a great week!

• OfficeJet Pro L7580 - 'no Scan Options '.

  I have an Officejet Pro L7580 - I just started getting the 'Scan Options no' when I try to use the scan on the Panel button.  Also, I can not open the HP Solutuion Center software to scan from computer.  I tried the HP cat help... worthless and uninstalled and reinstalled 3 x no luck!  Help!  Print and copy of work... but no scanning! Thanks Bob

  I tried all these people... my problem is supposed to be up to the next level at HP and they call me when they find a solution... no more waiting... I'm at $ 300 for the all-in-one with piss poor supported.  I'll buy a Kodak all-in-one and I will never buy another HP product as long as I live!  That's a promise!  Thanks to all who responded... I'm just tired of dealing with this!

• OfficeJet pro l7580 impossible to reinstall hp Solution Center

  I have a Win 7 Home Premium w/SP1, updates current MS at 27/05/2014

  Wireless connect to Officejet Pro L7580.  We have Verizon FIOS & wireless phones.

  The L7580 is connected by Ethernet to a 2nd PC w / Win 7 Home Premium w/SP1 & common enough MS updates.

  I have been using the above configuration for 2 years with the center of HP solutions for scanning, printing from a PC without any problems.

  Then, I improved the Verizon router to have the WPA2 security on 02/06/14.  I am able to print as I did before, but HP Solution center gave me an error msg:

  Solution Center cannot run because the installation is not complete.   I would like to be able to view a jpg.

  1. based on some advice forums, I reinstalled the using L7580 full download, restarted - received the same error msg when opening HP Solution Center.

  2. I uninstalled the HP Solution Center, rebooted.  Installed the packge L7580 full, rebooted.  HP Solution Center has not been installed. Can print as I have before.

  I need help,

  Thank you very much

  Ken

  Thank you for responding.  I decided that I would replace the L7580.

• Connect my Officejet Pro L7580 on my my wireless home gateway

  Is it possible to connect my Officejet Pro L7580 all-in-one directly to my Motorola Wireless Gateway?  I consider the printer becomes visible by other wireless devices and would allow me to print wireless laptops, my iPhone, etc.  Currently, the printer is connected via a USB cable directly to our pc at home.  From a wireless perspective, I currently have the available printer to print wireless connection first via the pc at home.  It works intermittently and the home pc must be on to make it work.  My Wireless Gateway has only an Ethernet port which is connected to the pc at home and it has a USB port.  Not sure of the term appropriate for the size of the USB port, but it is not standard and the size is associated with the USB output on most printers.  Thank you!

  Yes, you can keep it connected, but I don't know why you would want to.  All of its features will be available through the connection to a gateway.

• I have an Officejet Pro L7580 all-in-one. How do you find the printer did how many copies?

  I have an Officejet Pro L7580 all-in-one.  How do I know how many copies the machine made?

  Dragon-fur (unusual name!)

  Thanks again for your suggestions, which led me to the answer.

  Looking more closely at the options in the HP Solution Center, which I thought I had already exhausted, I followed these links - settings, print settings, the Toolbox for printer, information, reviews, myprintmileage, source, which led me to the total number of pages, number of total jobs and many other information, which, apparently, is monitored by HP.

  Thanks for the clues get me there.

  Kind regards

  Tony

• How can I change the margins on my hp officejet pro l7580

  Some forms print have information of compliance at the bottom which is necessary to properly process the document and margins on my hp officejet pro L7580 (printer), often cut out of the bottom of the page. I need to adjust the margins on the machine itself. How can I do this? I have searched everywhere online and my manual and can't find the answer.

  Unfortunately there isn't a way to set the margins on the phone itself, but you can enable the printer to print without margins (that is) that your program has full control of the border) by following the instructions in the link below:

  http://support.HP.com/us-en/document/bpy21049

  Once you have done this, you should be able to adjust the margins through your program without limitation.

  What is the information that you need?

• OfficeJet Pro 8600 appears twice in the selection of drop down menu printer with each of the different names.

  Hello!

  I recently acquired an Officejet Pro 8600 and immediately connected to my network wireless as stated in the manual. No other type of connection has been used beforehand and the operating system is Windows 7 64 bit.

  After that the installation of the printer driver appears twice each time that a program asks me to select a printer from the drop of the printing devices in the typical menu of preparation of printing.

  There is an entry for "Officejet Pro 8600 (network)" and something in the sense of 'HP95CDN' (Officejet Pro 8600). I can't remember the exact names off the top of my head, but it is the name of the printer with the 'network' in brackets in one case and a kind of shortcut ID printer with full name in parentheses in the other case.

  According to the program, one of the options gives the desired impression while the other simply causes a queue of indelible impression for the name of the unit in question that is stuck to a few KB of data transmission.

  Usually printing works with the device with the identification of the printer in its name, but I recently had a case where with LibreOffice printing only works with the other choice.

  Can someone explain to me exactly means?

  See you soon,.

  Pete

  Direct entry Wireless will be visible under menu so direct wireless is on... However, since you are able to print another icon (not the network icon) I assume direct wireless is off coz you will not be able to print from wireless directly on the printer if you are connected to the router.
  
  I believe that the icon of the printer (not the network icon) has a port WSD assigned and is automatically detected by the operating system and installed.
  
  Go to service window and check if you have any input that says function Discovery Provider Host and see if it is started. Try to stop the service, and remove the icon of the printer (not the network icon) in the print server properties.
  
  Restart the PC and check if the icon comes back or try to uninstall and reinstall
  
  Let us know the result

• HP Officejet Pro L7580: "Automatic duplex printing Module is missing" message.

  Although the double-sided printing works fine, the "Automatic duplex printing Module is missing" message, as I updated to Windows 10. I installed the latest drivers. Maybe a firmware update can do the trick?

  

  More from my side:

  I thought a little more on this subject and maybe we can solve this problem with a printdriver alternativ.

  Let's try a driver "HP Officejet Pro K550 series".

  Perform the following steps to install the printdriver alternativ:

  • Right click in the bottom left of your desktop and select 'control panel '.
  • then select "devices and printers".
  • Click on "add a printer".
  • Then click on "my printer is not listed.
  • then mark "local printer" (bottom)
  • Select "HP" on the list on the left and "HP Officejet Pro K550 series" on the right
  • After that finish the wizard

  After you have added the printer with success mark this printer as "standard printer" and allows to have an eye on printing and we'll see whether or not the error appears again.

  Kind regards

  Steven_K

• OfficeJet Pro 8500 a Premium: my printer driver has changed and it's HORRIBLE

  I have been using my HP 8500 a all-in-one with a few years now with no problem.  Day before yesterday, I met a problem: when I tried to specify certain pages of a document to print, I get an error message.  However, if I chose to print the entire document, it would print.  I assumed that my driver to be updated, so I downloaded from the HP website.  WHAT A HORRIBLE MISTAKE IT WAS.  My scanning utility has changed, I can only print even when I choose to print an entire document.  I can't print at all in an Excel worksheet.  I tried uninstalling the driver and re-install.  I DON'T want to network this printer, but now whenever I have try to reinstall the driver, I can choose to connect via USB, but on the pop - up next, it does not give me the option to proceed.  It gives me the possibility to 'come back' or 'jumps' USB connection.

  What the hell is happening?

  Hi @LMKos,

  Welcome to the HP community!

  I hope you have a pleasant experience here.

  I want to help you with driver/software problems that you are having with your HP Officejet Pro 8500 has e-all-in-one printer and your computer Windows 8.

  It seems that your software is may not be installed correctly, in addition to the common issue of 8.1 to Windows Installer automatically update Windows drivers.

  First of all, with the USB cable plugged in, we want to remove all instances of your printer in Device Manager (so when you plug the USB cable back in during the new installation, it will be seen as a new device).

  1. Open your start.
  2. Start typing 'This PC', it will come under results of research. Right-click on computer and select Manage.
  3. Click Device Manager on the left side.
  4. In the main part of the window, locate in the following categories for all HP entries: Bus USB controllers, printers, imaging devices and other devices.
  5. If you see your HP printer in one of these sections, right click and select Uninstall. Keep an eye out as well for all that said device unknown and let me know if you see this at all (these are also well uninstall).
  6. After have removed all entries of HP, unplug your USB key and leave it unplugged. Do not reconnect the USB until you are asked when reinstall us.

  Next we want to remove printers from the printers and devices folder.

  1. From your desktop, or drag from the right to open the bar of charms, or press Win key + C on your keyboard.
  2. Select settings in the bar on the right.
  3. Select Control Panel
  4. Under hardware and sound, select devices and printers
  5. Right click on each icon you see for your 8500 has (even if there is only one) and select remove an instrument, or delete.

  Once this done, allows to make a cleanboot from your computer (this turns off all non-essential startup programs, so if there is another program running that interferes with the installation we can avoid it).

  How to perform a clean boot in Windows

  Once the computer restarts, try to download the HP printer install wizard to complete the installation for you. It will automatically detect your device and install the appropriate software.

  Please reply to let me know if that solves the problem.

  Good luck!