FLAS disk not recognized

Similar Questions

• Satellite A10 - recovery disk not recognized

  I want to format my hard drive and reinstall windows xp.

  Of course, I have Toshiba A10 laptop with HDD 160g, 1 g of Ram, cd/dvd player and the restore disc (cd).

  Problem: the restore disc is not recognized by the cd player. When I insert the disc, then again, boot sequence goes to hard drive and boots from there

  What I did:
  1. check if the reader sees another s cd. Answer Yes, Yes
  2 boot sequence of the bios checked as well as toshiba consoles set up made sure it is
  in "order"hdd, lan, floppy, cdrom", (I tried other combinations starting with cd as well).
  3. I cleaned the restore disc, didn't work
  4. I ordered another set of Toshiba restore disk, which did not work either, still not recognized
  5. I bought a cd/dvd external reader believe it or not, disc starts to work in this case, I get a warning screen shows all data will be lost and asks me to click if I want to continue, when I click it says will now restart the computer and it does but comes back and goes back on the hard drive and boots from there.

  I must also add; When I switch on I get "' pxe e61 media test failure, mof outgoing intel boot agt" msg, according to my search, this problem indicates hard disk.
  but my hard drive does not work,

  Will someone give me an advice?

  If the BIOS is set to boot from the local network first, before trying to boot from the HARD drive, you will see the error PXE.

  Have you tried to clean the lens in the DVD player? Wipe with a Microfiber cloth.

  try holding down "C" when you turn on the laptop, this will make it boot from the CD.

• Re: Qosmio x 770-107 - recovery disk not recognized

  I gave up my old 3 months Qosmio x 770-107 last week and killed my HARD drive. A new HARD disk, exact replacement to order it. Ordered a DVD of recovery of this backup media site that is posted here. I entered number etc.

  Rolled up today but at the start it is not recognize at all. He sees my drive in the BIOS, and I changed the startup as well as preferences to try waiting usual f12 or whatever.

  All I get is:
  "Reboot and select proper boot device."
  Or insert boot media in selected boot device and press a key. »

  It doesn't matter what I do.

  I tried another windows 7 boot cd and it started to load files perfectly. It's infuriating after 8 days of waiting, I thought I was back in business.

  Any help?

  Thank you

  Chelm.

  Post edited by: chelmdog

  > I tried another windows 7 boot cd and it started to load files perfectly.

  This means that you can install Win7 using the original installation disc from Microsoft but Toshiba recovery disc is not recognized at all?

• DVD - RW for Satellite 2800-500: IDE1 error, disk not recognized

  Installation of a slim drive DVD - RW NEC ND6500 caused a message "Error IDE1" at startup and the drive was not recognized.
  The DVD-RW Toshiba SD - R6472 drive is not compatible with my Satellite 2800-500?
  Does anyone know a way to make someone of them work?

  [Edited by: admin on 22 July 05 17:57]

  Hello

  The problem is that all CD/DVD drives cannot work spirit all models of laptops. The problem is that there is no way to change to master or slave. AFAIK there is no public document that shows the discs and laptop computer compatibility.

  The best solution is to check if the drive is CSEL. In this case, it should work properly. If you can check please if you can find the CSEL notation on the label located on the upper side of driver s.

  Good bye

• Satellite A50 - recovery disk not recognized

  Hello

  I have a Satellite A50 who I am rebuilding. I insert the recovery disk came with the laptop. I get a window with the message
  "This recovery and Applications CD is not configured to work with this machine (laptop). This CD is for: Satellite A50. Please use the good recovery and Applications CD".

  I'm looking at this message. I look at my laptop with Satellite A50 wrote about it. And I don't know what to do next. Can anyone help?

  Thank you... Peter

  I agree with Bob. Mobo was traded in the past?

• Satellite Pro 6100: disk not recognized HARD - error IDE #0

  I just replaced a failed HARD drive from MK4019GAX in my 6100 Pro of the Satellite with a MK4026GAX and have tried to install XP Home. I can't recognize the hard drive of the computer.

  When I boot, I get a message ERROR IDE #0 before installing Windows, then a message saying that all third party SCSI drivers should be installed first. (I'm starting with the Windows disk in the drive) then when it is at the end of the installation process a message saying that "put in place did not any hard drives installed in your computer.

  If I boot without the Windows I'm getting PXE - E61 Media test failure.

  When I go into the BIOS ACPI BIOS version 1.90, under devices "Mode HDD = used (s) ' I can't get in to change and there is nowhere else that seems related to the hard drive (apart from the boot priority section).

  I read on a forum somewhere that there could be problems getting the BIOS to recognize a new HARD drive.

  It is a common problem for this model, or is the new hard drive may be defective?
  Is there a workaround or a solution?

  If all requested assistance right.

  DM

  Hello

  This error message indicates that the HARD disk drive was not properly acknowledged. The fact is that this unit uses a regular IDE (ATA-5) interface and the new HARD drive is supported by this interface.
  In this case, I assume that the HARD drive has not been installed correctly. Try to remove the HARD drive and check the connections.
  The other possibility is that the HARD disk controller is dead.
  In this case, the service partner must check the laptop.

• Satellite 5005 - recovery disk not recognized

  I'm trying files my satellite 5005-S504 but when I put the original disc, one in the computer does not recognize say 5005 series disc and is not compatible with this PC.

  Help, please!

  Can you tell us more about your laptop?
  Is this laptop your day or you have bought used?
  East - the first time that you use the recovery disk?
  Maybe is exchanged mainboard?

  In any case, visit Toshiba US page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp for assistance

  There you can find description and DMI tool how to use it. After using this tool, the motherboard will have good information. Before the start of the recovery procedure this information is compared with the information stored on the recovery image. If these two pieces of information are the same, you will be able to install the recovery image.

  Surroundings and good luck

• Seagate hard disk not recognized

  I have a drive hard seagate that has been configured for MAc, in 'my computer', it does not recognize this material. How to configure Windows 7?

  He is identified in disk management, if so remove all found partitions, Partition/format then to NTFS

  With the help of his mac format that cannot be read by win

• eSATA disk not recognized correctly on e9280t.

  When you connect an eSATA disk that works on another system for ports eSATA on the e9280t system, it does not appear in Windows Explorer.

  He appears in as 'ST31000340AS SCSI Disk Device' Device Manager.  It is NOT a SCSI device.

  A few details:

  eSATA drive enclosure: Vantec NexStar-3

  BIOS FRIEND 5.24

  Who tried to connect a drive eSATA to this motherboard and what has been your experience?

  Thank you

  How appears the external HARD disk upward in disk management? It is active & online? You can change the drive letter mapping?

• R720 PE hard disk not recognized

  It is a newly purchased machine without BONES. I tried to install Windows server 2008 R2 Standard but stalled to the point that the drivers for the hard disk had to be loaded. In preparation for the installation I downloaded all the drivers on the material and has a drive ready for entry. Files were burned directly to the root directly but always installation failed because he could not find the readers. I can't spread their wings to get Open Manager or other tools started because readers cannot be configured.

  Can someone tell me how to get started with it? Thank you, ykelley

  You need drivers.  2008 R2?

  http://downloads.Dell.com/FOLDER02416328M/2/SAS-RAID_Driver_W2K8R2_D5N8T_A06_6.802.21.00_ZPE.exe

  Download and run to extract, the put option are the files are in a flash drive, click load drivers a link on the page that says no hard drives.

  Why RAID 0?

• Old pc in enclosure hard disk not recognized by the new pc using windows vista

  Old pc unbootable.  Got a new laptop and want to recover data on the old hard drive.  Use a Sweex 3.5 IDE enclosure, to connect the old hard drive via the USB port again mobile. The hard drive is visible in device management, but not in my computer.  No idea how to solve this problem?

  Hi Tomvdv,

  At this point, it would be best to contact directly the Sweex.  It is the responsibility of the manufacturer to provide drivers for their devices:

  http://www.Sweex.com/en/service-support

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Floppy drive to ASR disk not recognized at the end of the backup on external drive

  Before you back up to an external hard drive, I'm warned I need a disc to record recovery system information.  Once the backup is complete, I said that he cannot make the ASR diskette because there is no disk drive.  But there is a car and I loaded it with a new DVD.  It shows the disc and the MBs available on the DVD by clicking on 'computer '.  How can I get the backup program from Vista to recognize that the floppy drive is there and ready to accept the ASR information?

  Hi RitaGowen,

  (a) edition of windows vista you run on the computer?

  (b) how exactly you are trying to back up files? You try to create an automated system recovery (of the ASR system) disk?

  Please, give the full error you receive to better understand the issue.

  You might want to know

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

  Back up your files - frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  What do you mean by "assigned to this disk as the location of the Archive" is this something to do with the software you use?

  The drive is formatted for Mac?  Menu go to menu, click Finder go > utilities > disk utility > click on external drives partition - format it sets out Mac OS X extended.   Otherwise, to save the files on the disk and ease than Mac OS

  

• External hard disk is not recognized in my computer

  My external Western Digital USB hard drive is not recognized in my computer.

  I see it in Device Manager and computer management/disk management but not in my computer.

  Update driver, a refreshed in disk management and several reboots.

  The external hard drive is there but not recognized on my computer.

  I need to restore from this external hard drive, but I can't access it.

  most of the answers deals with reformatting... the original post says he wants recover from this drive to reformat does not help... the external usb drives, equipped with cables that have 2 ends of usb, connect the two in to; separated on the MB, separate usb hubs usb ports it is because power is causing problems (current rises to voltage drops) then sometimes access to the drive causes the voltage on a single falling down USB, think the os it's read-only / permission issues, with 2 connected to separate power sources the question goes... they were built that way...

  I also recommend to never put a USB through a third party hub as more often which can cause problems with the unrecognized drive.

  That said, yes I had to reformat to access a drive, if you cannot write to a disc rclick and observe the permissions, if you have formatted the drive on another pc and not changed the permissions for everyone, then under sercurity see you permissions set on a long number, it is because he is always set to original pc (or the id of this pc). Sometimes you can over the way these parameters by taking possession (in the s parameters) and reset to everyone on the local pc.

  Something else I found on the disc is not recognized... Plug it into the usb port as described above and restart the pc, I got this job...

  Note: I deal with almost all the avalible from different readers that my clients use them all.

• My SATA to USB bridge is not recognized in disk management

  I bought a few SATA USB adapter, connected to my WD hard drive and my USB port, the computer recognizes, to install software for it and that's all.
  I can't read the disc via Explorer because it is not recognized, only in the Device Manager it seems nowhere to be found, saying SPIF30x USB2SATA bridge device USB. I've searched for so many solutions and everything I find people you said to go to disk management and assign it a letter. Problem is, it does not appear. Everything I see here, is my main hard drive, divided into 4 parts, which should be normal, but in the port USB (F:\), where I plugged the adapter, it shows nothing. The adapter itself has 2 LEDs indicating power and access, with only the power light that shines. The light also keeps shining when I plug the hard disk, so my guess is the adapter is recognized, but the disk is not. The drive should work, I've so far always used internally (SATA cable from the motherboard, you know).
  Please help me with this.

  If its not seen in disk management and then the drive has failed or connection method, the usb/sata converter does not work