OfficeJet pro l7580 printer print shows 75% smaller

Similar Questions

• OfficeJet Pro L7580 printer all in one

  I recently downloaded the HP Officejet Pro full features (Version 14.0.0) software to my computer HP windows Vista (32 bit) and now I'm my files scanned problems - they disappear after scanning with the HP Solution Center that is installed with the new software.  I have read several posts and tried their solutions but also download all the patches available on the HP website, but whenever I try to install the patch I get a box pop up that tells me that I have not all installed components that need the fix.

  Does anyone know a solution to the 14 software version?

  Hello

  Please try follows him and check any changes:

  1. Make sure that the HP Solution Center is closed.
  2. Enter C:\Program HP Imaging\bin and locate the file hpqxmlul.dll .
  3. Move this file to a temporary folder elsewhere as your office, just to backup porpuses.
  4. Download and save the following file to your desktop, remove it by double-clicking, a new hpqxmlul.dll file appears on your desktop.
  5. Move this file into C:\Program HP Imaging\bin.

  Now, launch the HP Solution Center and try scanning.

  Please let me know of any changes,

  Shlomi

• HP Officejet Pro L7580 (printer) printing faded every 3-4 lines

  My printer is less than 4 years. Recently, each page that print has every little faded lines. I have all new ink cartridges in the printer and have used the printer cleaning paper Laser buit several times the problem still exists. Any ideas? I don't want another printer.

  Hello

  Please try to make a copy of a document or a photo color.

  Let me know if the problem still persists.

• OfficeJet Pro 8625: printer shows as fax only

  The State of the printer indicates that it is configured.  I am able to print from my laptop (WiFi), but not from my office (WifI).

  Jobe feeling all enter fax, no printing.

  Hello

  Please try

  Click Start > devices and printers

  Right-click your printer, and then select set as default.

  In the opposite case

  Download the following tool and run it on your computer:

  http://ftp.HP.com/pub/softlib/software13/COL50849/MP-145514-4/HPPSdr.exe

  or

  re-install the software and driver.

  Kind regards.

• Scan to network Officejet Pro L7580 printer

  The printer does not recognize my computer on the network.  I can't use the analysis feature.  Windows recognizes the scanner exists but the HP software does not work.

  I need this job.  I called customer support several times, sitting for hours on the Chat support, uninstalled and reinstalled the software and all without success.

  I'm using an Intel computer dedicated, i.e.:

  Intel DP35DP Board

  CPU Intel 2 2.20 gig

  2 GB of ram

  Printer # is MY76C5212V

  MS Windows XP SP3

  I've been round and round with HP support on that.  There must be some conflicts of software on my machine.  Can you provide a list of known conflicts in order to run through my software and solve the problem.

  I might add that the other computers in the House are recognized by the printer.  The Vista machine does best with it.  I don't want to use the work around to do this, i.e. through the IE interface.  It is a bit expensive and unnecessary, method producing bad results regarding the scan image is concerned.  I need to scan photos and documents for commercial purposes.

  Please do some research and provide me with real and tangable help on that.

  O.K.  Here is what is the solution.  Are you ready?  Using all of your comments, combined with an Internet search for my problem, the solution lies in the trigger port and shipping.  Firstly, ICF must be set to allow "Host-name of the printer" port 9100.  Then, my Linksys router must be configured to allow the "printer name" transfer via port UDP and TCP port 9100.  Since all my computers are set to automatically receive IP, the printer must be set as such.

  Restart the computer.  Install the package of software and as if by magic, all is well in the office.

  So, the problem is not the software as much as it is in the installation and management of the network.  But, HP IT guys need to learn some of this stuff, so they can be better assistance in the future.

  Message edited by Hfefloors on 06/01/2009 15:14

• How can I change the margins on my hp officejet pro l7580

  Some forms print have information of compliance at the bottom which is necessary to properly process the document and margins on my hp officejet pro L7580 (printer), often cut out of the bottom of the page. I need to adjust the margins on the machine itself. How can I do this? I have searched everywhere online and my manual and can't find the answer.

  Unfortunately there isn't a way to set the margins on the phone itself, but you can enable the printer to print without margins (that is) that your program has full control of the border) by following the instructions in the link below:

  http://support.HP.com/us-en/document/bpy21049

  Once you have done this, you should be able to adjust the margins through your program without limitation.

  What is the information that you need?

• I have an Officejet Pro L7580 all-in-one. How do you find the printer did how many copies?

  I have an Officejet Pro L7580 all-in-one.  How do I know how many copies the machine made?

  Dragon-fur (unusual name!)

  Thanks again for your suggestions, which led me to the answer.

  Looking more closely at the options in the HP Solution Center, which I thought I had already exhausted, I followed these links - settings, print settings, the Toolbox for printer, information, reviews, myprintmileage, source, which led me to the total number of pages, number of total jobs and many other information, which, apparently, is monitored by HP.

  Thanks for the clues get me there.

  Kind regards

  Tony

• OfficeJet Pro 8610: print legal size document

  Is it possible to print a document on legal size paper on the Officejet Pro 8610 printer?  If so, how can I do or where can I find instructions?  I need to print an excel document and may take up to print, but do not know how to load the paper.  The tray is too small.

  @jaztenor

  Theuser's Guide (Chapter 2, Page 24) explains how to extend the tray for legal size paper.

  NOTE: To load legal-size paper, press the blue latch located bottom left of the status bar of entry and
  Deploy the status bar.

  

  Printing preferences to specify the printer paper that you use.

  Paper size and Media Type:

  Control Panel > display icon > devices and printers > click on your printer >

  Printing preferences > paper/quality tab

  Reference, suggestions and examples:

  Printing options

  

  According to the program / browser you use present it the print job, you can reach the printing preferences in preview before printing.

  Example - Firefox:

  Browser > file > (click) Print > properties (open printing preferences)
  

  Reference, suggestions and examples:

  Manage the print with preview output before printing

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• OfficeJet pro 8000: Officejet pro 8000 prints the part of the document

  Have a problem with both networking Officejet pro 8000's. If you print a paginated document 4, printing two pages and stops, then 2 minutes he feeds a white sheet of paper in the printer, the printer hangs then error light on, who need to power cycle to restart. The network is in a school, unused printers for a few weeks, before now, they both work as it should.

  This problem is with a laptop with free Wi - Fi. However, even 4-page document sent to another that officejet pro 8000 prints as it should, and prints as it should when sent to a photocopier.

  The network of small schools there are ten computers wired to office, after trying to print from one of them, the same problem occurs with 2 of 4 pages printing, then a white sheet, then the printer hangs. This desktop computer will also print the same document on the photocopier without problem.

  Not very well where to go with this, help please!

  Problem solved, simply wanted the new cartridges!, but what I do not understand why the part of a document of four pages would be absolutely fine print, all the colors print as they should, then stop and hang. Power cycle printer, exactly the same result. Exactly the same on both 8000 printers?

• HP Officejet Pro 8500 prints incorrect color photo

  My new Officejet pro 8500 prints once accuate color. But then, when I print another photo that is Lavender in color.

  I restarted. I reinstalled it. The problem still persists. What else can I try?

  Gibas

  Hello Gibas,

  Welcome to the Forums of HP Support!

  It might be possible that the poor quality of the image when printing with the 8500 is due to print heads. Given that you have uninstalled, restarted, etc it may be preferable to focus on them.

  You can try to clean the print heads, this guide will show you the correct way to clean: "the following printhead appears to be missing or corrupt" or "the following printhead has a problem" Message displays on the all-in-one.

  Let me know if this can help,

• HP Officejet Pro 8600: Printer does not print in color

  I just got the color cartridges refilled at Costco. Now, my printer does not print in color.  I printed out a diagnosis and cartridges are showing that they are full.  The actual color of magenta is a deep rose, so I know that some of the magenta is crossing. Cyan (blue) and yellow printed black on diagnostic tests.  I know that Costco filled cartridges with the appropriate color because I can see the color on/in the cartridge.  Suggestions on what to try? I bought the printer on January 27, 2013.

  Hi @monitons,

  Welcome to the Forums of HP Support!

  I see that your HP Officejet Pro 8600 printer will print correctly since fill you the ink cartridges. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you are experiencing.  It seems that there is a problem with the print head or ink cartridges.

  To determine the cause, I would like to use this document:

  • Fixing poor print quality

  If the problem persists, I suggest you try a new complete set of ink cartridges.

  How many times have you filled out the ink in these cartridges?

  TIP: Reloaded cartridges can stop functioning over time, if the nozzle one chip or ink is damaged.

  Note: HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Problem with the HP Officejet Pro 8500 printer: clean the print heads each time it is turned on

  Hello everyone,

  the printer HP all-in-one Officejet Pro 8500 (A909a - product n. CB022A) clean the print heads whenever I turn it on. This problem affects any HP Officejet Pro 8500 printer, it is not a problem only of this one I bought. It is a boring bug and annoying because each power clean print heads on involves two bad disadvantages:

  1. waste of ink (each heads cleaning process consumes little ink);
  2. too much time (2-3 minutes) to prepare the printer after plugging.

  I upgraded my printer with the latest firmware available on the HP site (firmware ver. DLM1FN1006BR), but the bug is still present.

  At this point, I ask:

  1. There is a way (or procedure) to disable automatic cleaning this useless to all power on?
  2. Can we communicate with the HP engineers or tell me how to contact directly one of them to indicate the bug and request a new firmware updated?

  Please don't tell me to leave the printer on all the time or that the printheads to each cleaning power is normal behavior! Where then are power and ink savings claimed for this printer model?

  I hope that a solution to this problem. Thanks in advance to everyone will help me!

  Maintenance when the printer is turned on is normal and is required to keep the printheads in good health (not blocked). See here for more information.

  With respect to energy savings, the printer automatically goes to low power mode when the don't feel not for awhile.  It is not necessary turn the unit on to save energy.

• OfficeJet Pro 8600: Printer offline and HP Support for Windows 10 don't come upward

  I'm trying to scan pictures to my computer.  Have upgraded to windows 10. My printer is connected wifi.  I bring the printer in Control Panel, set up my printer and it says printer is offline.  Indications are no good they do not appear to be implemented for users windows 10. When I try to go to the hp support for windows 10, I have just a white screen.  I am very frustrated.  I can print to the printer, but he won't let me not scan to the computer, and that's what I need.

  Hi @Procats,

  Welcome to the HP Forums!

  I understand that you cannot scan on Windows 10, with your HP Officejet Pro 8600 printer. I'm happy to discuss this issue scan for you!

  Please, try the following steps:

  Check the connection of the printer on the network and troubleshoot any problems with the printer, router, installation or connection.

• OfficeJet pro 8600 printer-how to make this program work and installation?

  I have problems printing. I wonder how to ste it to the top and do work.

  Moved from feedback

  Original title; printer Officejet pro 8600

  Hi David,

  1. what operating system is installed?

  2. what security software is installed?

  You can go through the printer manual to know how to set up the printer and make it work.

  You can also refer to these items and check if that helps.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/How-do-I-install-printer-software-on-HP-OfficeJet-Pro-8600/TD-p/1123283

  http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=Forum-Board%3AInstall&q=OfficeJet+Pro+8600+printer

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.