OIM 11 g: has someone successful pre-fill the nickname of post-processing

Similar Questions

• Pre-fill the fake

  Hello
  I have a situation where all provisions of a user account on a resource are made by operators (with the necessary roles to be able to buy directly a resource). Operators should be able to see the person in charge of the user on the account form. To do this, I created a new field in the form which is automatically filled with a custom with the User Manager adapter. The problem is that prepopulate adapters cannot fill a non-empty field, so if the user manager later changed, this field shows the former manager when you try to change the user's account. It is not important for me the Manager information (this is only for display purposes). So, is it possible to always pre-fill the field with the value of tha of the Manager, but save it in the DB, then this field will be always empty and always be filled with the value of the order display manager?
  
  Best regards
  Carole

  Why don't you wanan save this value in DB?

  Without saving changes in the DB, it is not possible.

  The problem is that prepopulate adapters cannot fill a non-empty field

  What it means?

  Entity adapter will only work if there is some update on the form.

  Prepopulate will works only at the time of commissioning not updated.

• Pre-fill the form button fields

  Hi guys,.

  After little help! I have created a web form for a company to use for travel. It has specific fields for location, accommodation and date of travel.

  I would like to know the best way to pre fill these fields if someone clicks on through a list of availability on a page of the accommodation?

  For example, if there is a link "Book now" on 11/17/2012 at the hotel of new in France, how I would make only if someone clicks on 'Book now' they then go to a form where they can fill in their details relevant information pre-filled for the date, they chose.

  for example:

  Name: (empty, to enter)

  Address: (empty, to enter)

  Phone: (empty, to enter)

  E-mail: (empty, to enter)

  Date: 17 November 2012

  Country: France

  Accommodation: Hotel new

  Nights: (empty, to enter)

  Any help would be appreciated, thanks!

  S

  All you have to do is have parameters in the URL and fill them according to the options.

  So... nextpage.html? country = & date =.

  And with jQuery that populate these settings on hover/click/change etc.

  Just make sure that they have values before going to the next page.

  On the next page all you do is use module_url.

  So for an entry for the country field you get the value {module_url, country} where the country is the parameter in the URL and the system will fetch its value.

  So the last part is simple, simply to get the url parameters defined when you click on through the following page.

  If it's a form, just add at the end of the action of the form.

• Download the signature using the API and pre fill the signature

  I use echosign api to display forms to get the candidate (which comes on our site). We show the form of widget. We use more than 40 forms. It is difficult for candidates to sign all forms. Is there anyway I can get the signature of the candidate and pre fill out the signature using the API?

  If not, is there another way to do this?

  NOTE: Candidate - not a user in echosign

  Hello RajkumarMohan,

  By default, it is always required by the signatories to give their signature any document esigning. Even with the API, it is not possible. If it is a single widget with several fields of signature, once the signer signs a first field, and then when he clicks on the second field of signature, the signature is automatically populated in it.

  Kind regards

  -Usman

• Pre-fill the end-user selection

  Can you set up several fields to pre-fill in the first input field?

  Yes, but you should not use JavaScript to get there.

• Pre-fill the form Registration (Buy)

  I think I'll be really really stupid, but I tried the tips on http://KB.worldsecuresystems.com/654/bc_654.html?BC-partner to allow registered customers to connect just after adding items to their cart without the need to re - register or fill in their details, and I can't seem to do.  I think I'll use method 1, but here are my problems.
  

  Problem 1:

  Where can I add the {module_FirstName}, etc available registration (Buy)?  Everywhere where I tried, is not displayed and disappears when I go back to HTML or is off the beaten path.

  Problem 2:

  Will the button automatically direct connection of the user to the pre-filled form?
  

  Does anyone know of a very good (and I think I need simple) way to do this please?

  In addition, while I ask me questions, when I add the payment gateway, these details will automatically fill their form as well.  I use SagePay I think.

  Thank you very much for your help

  Lisa

  Post edited by: GorgeousConcepts

  Hi Lisa,

  (1) all you need to do is to place the module within the field tag.

  

  (2) insert generic login area in the record buy arrangement.  This will simply refresh the page once the client connects.  No redirect is necessary.

  

  I hope this helps!

  -Sidney

• How to pre-fill the ADF form with the data?

  Hi guys,.
  
  I was wondering how you go about the generation of a pre-filled form of ADF. Is this something that is done if the designer of the ADF and the business objects? or do you create database tables stay and bind in the ADF and the workflow. Specifically, I want that if a user is presented with a several drop-down lists when the human task of the initiator is executed.
  
  Thank you
  Ross

  Hi Ross
  1. Yes, in all first place in the database, we added all the data manually for all research. Its our own schema custom. We plan to provide a few simple administration screens in a different WebApps to maintain these values to search. Note that it is a different simple ADF application, with a layer of EJB and EJB layer calling this and get/update database values.

  2. in ADDITION, we have a few search values we get from system/application totally another as Oracle EBS Suite. To do this, we have created custom schema. In this custom scheme, we have a few stored procedures created by the developers of EBS database (they are more familiar with EBS). Now in our EJB layer, we use architecture JPA, call these stored procedures and get all values for the search and display in the TaskDetails page. These values are maintained in EBS itself, so we have not all custom within our SOA/BPM project admin screens.

  In conclusion, our SOA/BPM applications, we have 2 databases. First database is for components SOA where we run RCU comand and there all SOA_INFRA, MDS, diagrams ORABAM etc. The second database is for our custom schema specific to our application. Here, we have our own lookup tables, custom table and all cutom stored procedures than coonect to external EBS etc. Weblogic console, we have just to create a data source for this second database and use layer JPA (persistence.xml file). For the first database, you already know that in the creation of the field itself, it will create all sources of data also.

  Thank you
  Ravi Jegga

• How to pre-fill the user information during the operation to assign tasks

  Hello

  I have a requrirement to pre-fill fields of the form (name, Email, phone etc) when a task is assigned to a user. Users are dynamically specified, so I use the user to find and services to assign tasks to locate and assign them to the user. Since I was a user variable that is the result of the operation of the user to find, I was hoping to get the user information with the attributes of the type of user.

  I tried to use the service to set the value to set the form field (Email) with the email of the user that is object type attribute

  / process_data/MyForm/Object/Data/XDP/datasets/Data/Form/User/email-> /process_data/facilityAuthority/object/@email

  However I get the following error when I try to do - com.adobe.idp.dsc.util.InvalidCoercionException: can not compel object: [B@335d of the type: [B type: interface org.w3c.dom.Document.]]

  Is it possible to retrieve information from the user to the user object? If yes how values for the attributes of the user (name, Email and phone etc...) so that I can fill in the form?

  Thank you
  Nicolas

  Hello

  Please cast chain e-mail before you assign it.

  Example of

  / process_data/MyForm/Object/Data/XDP/datasets/Data/Form/User / email-> string (process_data/facilityAuthority/object/@email)

  For more details, please refer to the forum http://forums.adobe.com/thread/492826

  Thank you

• Pre-fill the adapters stopped working

  Hello
  
  I added some attributes to an existing adapter pre-population code. He mapped successfully to the field to form user AD process. There were several prepop adapter related fields on the process AD form.
  
  But now, after that I did the changes, no cards pre-population works. I don't see anything in the form of courses when I set up a user of AD. Even AD provisionign status shows as validation of PRovisioning task and the system is pending.
  
  Does anyone have idea about it? What could be worng here? I tried so many options (imported and replaced the process by other environments form shape, made several versions of the form of courses and set them active, recreated the adapter, compiled and again once it mapped with process form field). But nothing seems to work :-(
  
  Any help will be much appreciated.
  
  Thank you

  The error code:

  ERROR, June 26, 2009 04:01:52, 365, http://XELLERATE.ADAPTERS, class/method: tcAdpUtils/getJavaParms some problems: task PREPOPULATEDISPLAYNAME, constructor parameter 1 has not been mapped

  Indicates that you have not mapped to attributes in the constructor of your adapter pre-load "PREPOPULATEDISPLAYNAME." Please take another look.

  Hope this helps
  / Martin

• PC has not successfully restarted after the installation of updates

  Hello

  I have been updated with Windows Update and asked to restart my PC after the installation is complete, however, my computer froze just at that moment, so I had to press the power button to force it to close. So I don't a not properly restart but forced my PC to stop and I have not a screen saying "Configuring updates" as usual (because there is no restart appropriate but just a forced to close). When I turned on my PC back, I thought that all updates have been lost or screwed up because I don't restart the PC correctly, however, instead, windows said it was "Configuring updates" (from 0% to 30%) and 30%, he said he has been stop and then rebooted my machine and these updates have been 100% configured/installed.

  So my question is, were all 100% installed as said windows updates or was it just a fake reviews? Because I forced my PC to stop rather than restart it when all updates to complete the installation.

  In addition, argues that all updates have been installed successfully in the "Installed updates" menu, too. Please let me know if it of a false notice or not.

  Thank you

  T.

  Since you have not stopped correctly after the installation of updates, updates could not configured correctly

  Follow these steps to see the Windows updates are installed on your computer.

  1. Open Windows update via Control Panel

  2. In the left pane, click view update history.

  Use a system restore to restore your system to a previous state before the installation of the updates

  =================

  1. click 'Start' and type system restore in the search box, and then click "System Restore" in the section programs.

  When you are prompted by the User Account Control feature, click "continue".

  2. do one of the following

  * If there is a recommended restore point, click on choose a different restore point and then click Next.

  * If there no restore points recommended in the list, simply click next to continue.

  3. Select a restore point in which you know that the operating system works and then click on "next".

  5. in confirmation of your restore point page, click on "Finish".

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Pre-fill the form user Xellerate

  Hi all
  
  I have a small question I wondered if people might be able to help with. I'm working on some custom fields defined by the user and need to set automatically one of the fields a separate number. I was trying to find a way to pre-populate adapters for this but do not know if this is possible. The next option would be to make a shape any manager of data objects to assign the number based on a transaction of insert/update of the user. Not sure if one of these is better/possible, but any help you can give would be appreciated.
  
  Thank you
  Nick

  The user key stands in the base of the IOM. Can't you just use it?

• Pre-fill the checkboxes

  I found a bunch of resources scattered on this issue, but I can't put them altogether to get a complete answer. I try to have check boxes with coming of the contact fields (not subscription groups). This is the code I have so far:

  " < script type =" text/javascript"src =" http://img.EN25.com/Web/ReadyTalk/ELQ-validate.js

  "> < / script > < meta http-equiv ="Content-Type"content =" text/html; Charset = UTF-8 ">"

  < script type = "text/javascript" language = "JavaScript" src = " " http://www.ReadyTalk.com/sites/all/themes/ReadyTalk/js/elqNow/elqCfg.js ' > < / script >

  < script type = "text/javascript" language = "JavaScript" src = " " http://www.ReadyTalk.com/sites/all/themes/ReadyTalk/js/elqNow/elqImg.js ' > < / script >

  " < script type =" text/javascript"language ="javascript"src =" http://img.EN25.com/Web/ReadyTalk/jQuery-1.4.2.min.js "> < / script > .

  < title > < /title > subscription status

  < script type = "text/javascript" >

  The field of the parameter of variable propopulation

  var featureupdates = ' < span class = "eloquaemail" > featureUpdates & ProductNews </span > '; "

  var custOnboard = ' < span class = "eloquaemail" > customerOnboardingOptIn </span > '; "

  News var = ' < span class = "eloquaemail" > marketingNewsAndEducation </span > '; "

  Webinar var = ' < span class = "eloquaemail" > webSeminarSeriesOptIn "</span > ';

  var custnews = ' < span class = "eloquaemail" > customerNewsletter </span > '; "

  {$(document) .ready (function ()}

  Uncheck UnsubAll

  $(".subPrefs").click (function)

  $('#unsubAll').attr ("checked", false);

  });

  Deselect all the logics

  {$('#unsubAll').click (function ()}

  If ($('#unsubAll').attr ('checked') == true) {}

  $('.subPrefs').attr ("checked", false);

  }

  });

  if(featureupdates == 1) {}

  $('_#featureUpdates_&_ProductNews').val (featureupdates);

  $('_#featureUpdates_&_ProductNews').attr ('checked', 'checked');

  }

  if(custOnboard == 1) {}

  $('#customerOnboardingOptIn').val (custOnboard);

  $('#customerOnboardingOptIn').attr ('checked', 'checked');

  }

  if(News == 1) {}

  $('#marketingNewsAndEducation').val (news);

  $('#marketingNewsAndEducation').attr ('checked', 'checked');

  }

  if(Webinar == 1) {}

  $('#webSeminarSeriesOptIn').val (webinar);

  $('#webSeminarSeriesOptIn').attr ('checked', 'checked');

  }

  if(custnews == 1) {}

  $('#customerNewsletter').val (custnews);

  $('#customerNewsletter').attr ('checked', 'checked');

  }

  });

  < /script >

  It does not work.

  Any help out there?

  Post edited by: Michael McKinnon - remove extra support

  OK, I answered my own question and got the script working. Of course, this only works on Elouqa hosted pages and not to third party sites where you can search for data.

  There is additional support by causing a syntax error that I discovered. I removed the incriminated in the jquery update support is now a working version.

• Has someone managed to recover the annual renewal of autobill put in place by default by Adobe that they ignored?

  I've been autobilled $ 359 for another year of Adobe. I had only used it for approximately 10 hours the first year. I was ignorant of the auto renew that Adobe put in place. I found out 2 weeks after the event, when I checked my bank account.

  The officer and his superior "Aurora", which I didn't have the right to speak, said that they could not repay the money because it was a month after and the terms and conditions of State you have five days for questioning.

  1. only 15 days had passed, not a month and 5 days allowed is too short time if something is wrong in the method of communication, goes on vacation, falls ill, computer breaks down, or be it for 5 days.

  2. they offered to reduce to $200 and $ 159. This does not help me because I do not use the software enough and planned on not using it at all.

  3. they said: I was warned despite my repeatedly telling my story of why I do not use e-mail or the adobe account more.  It sounded like they tell many people this. I think they could avoid this by ensuring that it is said people from the outset. A large part of the terms and conditions should not be hidden in the small print. Take clients for more money without their awareness is not a good practice for a large company that should be able to trust more.

  4 I asked the General conditions and no they were not given.

  5. I have asked the legal service and no they were not given.

  Now I have to refute this charge with my Bank.

  Anyone been able to get this refund?

  Thank you

  Shawn

  I'm sorry that you had a bad experience when you contact support and that you do not find the clarification above useful.

  The link above (General conditions of subscription ) also contains the terms of the annual subscription prepaid where you need it.

  I'll make arrangements to have a support contact you agent to see if they can help you further.

  Guinot

• Can the sender pre-fill the email address of the other signatories?

  I want to create an employment verification form.  Sender prefills fields and sign the authorization for the former employer to disclose information (sender is the first signatory).  Sender e-mail address of previous employer prefills.  I want this email address to be recognized as the address of the second signatory.  Is this possible?

  @

  Hi Carrie,

  EchoSign is unable to do this automatically. You must specify the e-mail address that the signatory for EchoSign to send the document to the recipient for signature.

  Kind regards

  Rave

• OIM 11 g R1 - change a resource clears the task of custom process?

  I created a generic IOM resource that uses the connector of the Table in Database Applications 9.1.0.5.0.
  
  Then I add my own tasks of process Design console under "process-> definitions of process management. On each custom process task I have attached my own custom adapters, I created via "Tools-> adapter factory development" in Console design. These custom adapters use methods from my Java code. My Java jar file is located in "Oracle_IDM1/Server/JavaTasks.
  
  Now, here's the question:
  Whenever I change this resource in IOM under 'Configuration-> Manage generic connector' (for example change the reconciliation type from full to incremental), deleted all my custom process tasks.
  
  What is the reason for this? Is there a solution for this problem?

  One of the major flaws of the CGI. All data is contained in the GCD table as well. Most of the time you can make changes here, but if you plan to use the GTC, he starts whenever you try to make a change, and it will also delete your Lookup.USR_PROCESS_TRIGGERS if it is confidence. Just be very careful.

  -Kevin