OK, I'm not really understabd VMware, perhaps someone could point me in the right direction

Similar Questions

• How to cancel my subscription to Adobe? I am charged every month and I do not really use it enough to justify. I followed the instructions of tine for how to cancel at least, but it does not give me the "Cancel" button to click.

  I am charged every month and I do not really use it enough to justify. I followed the instructions of tine for how to cancel at least, but it does not give me the "Cancel" button to click.

  Cancel https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

  -or https://helpx.adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp

• Firefox does not open a new tab page, but if I use the "right mouse botton"-> "Duplicate tab" as it opens a new tab how can I solve this?

  Firefox does not open a new tab page, when I click on the small + firefox does not respanw, but if I use right mouse botton -> tab double as it opens a new tab how can I solve this?

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• Trying to get into my email account but the customer service will not recognize me as owner, have no cell phone, have the right password and have used it several times.

  , customer service will not recognize me as owner, have no cell phone, have the rite pass it used several times

  original title: How can I get my email account

  Hello

  Which email service provider?

  If you use hotmail or Windows Live account, you can post your request in the Forum Windows Live for other assistance or contact offer your e-mail service.

  In the Windows Live Forum

• Printer prints not according to preview before printing, it will display on the right side.

  Original title: Epson Stylus SX235W

  I have the above printer but it is not print preview before printing on the right side I tried it realign your impressions, but it has not worked help me please, I have Windows 7

  Hello Polly,

  1. this happens with all the documents you print?
  2. you try to print from Internet Explorer?

  Here are a few web links to solve this problem, try them and reply here with the State.

  How to use the print head alignment utility in Windows 2000, XP, Vista, Windows 7 or Windows 8?

  http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/FAQ/11101/1097

  Print quality problems: blurred impressions

  http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/FAQ/11101/1376

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• CC 2015 Mac inDesign: Selected items not highlighted in "layers panel." As square boxes to the right or the name of the element in the layer panel is missing. Help, please.

  

  See replace your preferences

• Please help - what software would be useful? (im not sure in the right category here)

  Hi guys,.

  I was wondering if someone could point me in the right direction about what follows. I am a student in abrasive particles and I several stills SEM of 10 to 120 Micron particles. I'm looking for a software that will allow me to easily calculate the various properties related to the particle, like size, geometry, space ect - or anything really that could be useful for me to compare one particle with another.

  (1) is there some features that may be useful to know when it comes to comparing the abrasive particles?

  (2) is it simple software available that would be suitable (I recommended a program called SIGMAscan but it may seem too much of an investment to about $900 for what I need to).

  Thanks guys, appreciate any comment

  Chris.

  Thank you

• Not there at - it no man who can help you the account recovery?

  It's very very frustrating.

  Apple ID password is forgotten, and the trust phone number is disconnected.   When you try to account for recovery, it is first suggested that I get a SMS verification.   I can provide the phone number, but I have to select I have more access to the number later.

  Then, it asks which credit card I used for buying Apple.   It's easy, I even have my receipt of purchase of the phone and to know exactly what card I used for purchases of Apple's iOS.   I enter the information of the card out of the physical card in front of me, and the system indicates several times that the expiry or the CVV value is false.    Well, no: he wasn't an earlier map with a different value of expiry/CVV.   It WAS, but it was a year before my use of my first iOS device so literally impossible.

  So, I click that I don't have access to the card more.

  Then, I provide a phone number that I can receive a SMS on for purposes of account recovery.   I receive the text, confirm the code and then informs me that I have to wait for more information.

  I waited a few days and went to iforgot.apple.com , by following the instructions to check the status.   He said that it is still ongoing.   But there is a link: "having additional information to verify your identity?   I happily click the link, thinking that I can finally send a few notes or a picture of the credit card to complete the case information.   No, it's just a link that brings back me to the procedure of restoration of cookie-cutter and if all goes well, it didn't reset the process altogether to extend.

  So I wait several days.   Then, in hope, I'll be back on the web site to see that it started the process again as if I never did in the first place.   Rinse and repeat these steps twice, sacrificing a week and a half in the process, in addition to disabling my cameras just to be sure he would not cause conflict because they were on.

  Apple, I know you must be discreet about the exact nature of these processes.   But if you think about it - people who hack accounts as part of their daily routine are more likely to be aware of the inner workings and timelines associated with the process.

  People who suffer are the ones who really need the information.   I would venture to say that people would be paying a good price for a recovery service or an assistant who could at least give them an idea of how long would take the things, if there is nothing that can be done to help or what to expect next.    Because, obviously, the "recovery will take a few days." is a true statement indeed.     I have no idea of what is happening in these 'a few days' every time, but certainly, it has not been reviewed by a human.

  As a final note, I would like to say that, in my view, that consumers Apple are merit to be of a higher level of service...   For the premium paid all around for iDevices is certainly one aspect of the service that is not at the height.    I apologize for the rant, but now a member of the family has to leave to Mexico with no means of FaceTime friends/family, while out of the country because of this.

  If anyone can help or point me in the right direction, I would be eternally grateful.   I've been through the hoops by calling Apple directly and provided documentation, etc., but never received the call final return after all the time invested.

  Thanks in advance,

  Josh

  P.S. It's Apple ID to a friend - not the Apple ID I write.   (Cannot connect to the offending Apple ID!)

  There is a contact link.

  Apple ID support

  Apple ID support (2)

• Video error - files needed to display video are not installed or not working not properly. Please restart Windows Media Center or restart the computer

  I have Vista Version 6.0.6002.18030 (vistasp2_gdr.090429 - 2357) SP2 installed during an automatic update.  This box is only used as a Media Center

  Now, I get this error when you try to watch HD programming - I get a few seconds of viewing before the image starts to freeze, the acoustic breaks then the error message.
  Recorded at stations SD I will often get towards the end of the program, and it starts too break up.
  The Analysis ToolPak that I found for the Hauppauge 500 t tuner I have reports that all networks have 70 + strength and 100% quality.
  The performance of the Task Manager tab indicates the processor cores ares works at about 25% of capacity
  I had a lot of trouble getting the Pioneer BD drive to work - it turned out to be a very minor mistake, a slider maxed out on the Graphics tab "overlay" card - but until I found this he encouraged to re - install the OS from the original DVD and the problem persists.
  The system used to work properly and there has been no hardware apart from the Pioneer BD drive changes.
  I got ffdshow installed from the beginning, so I don't think that's the problem.

  DVD read OK

  BluRay disks play back ok using the Cyberlink plug in BOF VMC

  Different types of downloaded files play OK using VLC.  So, I conclude that the (integrated) graphics (latest drivers installed) and in the rest of the material are very good.

  Looking through the forums, this seems to be an old problem, but its very curent FRO me and SUPER frustrating.

  The indices of anyone?

  Hello Clement,

  Thanks much for the reply.
  I had already downloaded the Tuner card driver on the site yesterday and installed (this is the same version I already had, but he did not seem wrong to re - install).  No change.
  I really don't understand well enough codecs!  -are you making allusion to the East no doubt not that the encoding of the input signal software cannot do its job properly?  Are the part of the tuner driver codecs? I could not see them on the website of the tuner (http://www.newmagic.com.au/Support/Hauppauge_Vista_Drivers.html)
  Can you please point me in the right direction for the codec pack (btw, I though 'codec packs' were notoriously bad news! and since I recently made a new facility would be not all right codecs be there that they must have been before when everything worked well?)
  I have a chart integrated 'card' on the ASUS P5E - VM HDMI, an Intel GMA x 3500 and here too I have the latest driver from the Intel web site.
  I think I've found the "MS decoder checkup" utility you mention (http://www.microsoft.com/downloads/details.aspx?FamilyId=DE1491AC-0AB6-4990-943D-627E6ADE9FCB&displaylang=en).  I have a Red Cross and green ticks for different decoders but 'Microsoft MPEG-2 Video' (msmpeg2vdec.dll.) decoder is compatible with MCE, but not with MP10.  When selected "update now" button is dimmed.
  Thanks again

• Can not see my flash site when I upload it on the server. Help, please!

  I did a site in flash catalyst - and it was published as a swf file. Then, I went to filezilla and uploaded on the server. I have all the files I need on the server, including the html file that the swf is embedded. But when I look on the site of all, it shows me the background. I spoke with netfirms.com for 2 days and they tell me that it's on my end with the code.

  Other Notes:

  • It works when I discovered in the dreamweaver browser.
  • netfirms.com tells them that they need to update Flash 10.1 - what I did but still screen see purple and I have also went to 3 other computers with flash 10.1 on the computer and I always get the purple BG
  • Looks like he wants to come--looks like the clip wants to play but disappears and all you see is the purple BG
  • I also renamed the file index.html main.html (I've read is something that needs to be done)
  • Netfirms.com tells me that he can be a coding problem - but Adobe catalyst written all the code for you and her, as I said, it works when I view in the browsers - (google chrome, IE, Firefox and Safari)
  Please help me or point me in the right direction. Thank you very much in advance.

  
  http://www.mycpalawyer.com

  It will fail to load Main.swf

  I noticed that you do not have a main.swf

  Perhaps the file was renamed at some point.

  -Marc

• AUSST - not able to display XML files in order to verify the proper installation of IIS

  We implement our Adobe update server in a Windows Server 2003 R2 32 bit environment.  I followed Adobe technical notes on the configuration of the server with IIS 6.  I changed the settings in IIS, including the addition of the definitions of .xml to the asp.net web.config file located in C:\windows\Microsoft.NET\Framework\v2.0.50727\CONFIG.

  The question we have is this: I am trying to check the file updaterfeed.xml according to the documentation, but it is not displayed.  I enabled the exploration of directory, which allows me to click each folder until I get up to the following path:

  http://ourServer/updates/Adobe/CS/webfeed/OOBE/aam10/win/updaterfeed.XML

  None of the xml files are displayed.  I checked for XML MIME type in the form:

  text/xml

  These are the lines I added to asp.net web configuration:

  "< add the path = 'generated' verb =" "*" type = "System.Web.StaticFileHandler" / >

  "< add the path ="*.xml"verb =" "*" type = "System.Web.StaticFileHandler" / >

  "< add the path ="*.dmg"verb =" "*" type = "System.Web.StaticFileHandler" / >

  "< add the path = '*.crl" verb = "" * "type =" System.Web.StaticFileHandler "/ >

  "< add the path = verb"*.sig"=" "*" type = "System.Web.StaticFileHandler" / >

  In addition, according to the technology Adobe note for establishing AUSST provides:

  As a simple test to verify that the web server is running correctly, make sure that the updaterfeed.XML files on

  the update server is accessible from browsers on client machines. Essentially, you must ensure

  that the web server works, independent of the Adobe update server configuration tool.

  Can you tell me what I missed, or point me in the right direction?  There is no ASP.net error in Event Viewer.

  Hi, thanks for sharing newspapers. of newspapers, it seems that this updatefeed.xml file has been corrupted.

  There are 2 steps to solve the...

  Remove /updates/Adobe/CS/webfeed/oobe/aam20/win/updaterfeed.xml (make a backup of it) by AUSST server setup and then run AUSST mode incremental synchronization (option 2).

  If this does not resolve also the question then please share the newspapers again. also agree with the updaterfeed.xml file.

  Thank you

  Rahul | [email protected]

• PlayBook Simulator does not start in vmware.

  I had just installed sdk playbook and Simulator on windows 7 and configure the Simulator on vmware.

  But the playbook Simulator does not start on vmware... He simply display the splash screen...

  Do you have another computer to try out it?

  For example, in my case, I have 3 PC. Two of them the Simulator installed and worked well, the third, no matter what I do I can't get the Simulator to go beyond the start screen.

  I even took a suspended version of the Simulator everywhere for my 3rd machine, and it has run for a little while so locked up when I tried to activate the mode of development. However, VMWare works perfectly for other sims installed on this machine (but with VMTools installed in the virtual machine), then it is not a VMWare question by itself.

  Personally, I think that unfortunately for certain combinations of hardware/OS simulator simply does not work.

  FWIW my 3rd machine is underpowered with only 2 GB of ram, an Intel ATOM (z520) processor and a GMA 500 GPU which are pushed along Windows 7.

  HTH - Rufus

• How to delete an unread email that does not really exist?

  Original title: Emails

  How can I delete an unread email that does not really exist?

  Hey Chico,

  Welcome to the Microsoft community. I might help you.

  This problem might have occurred because of these reasons:

  1 corrupted app.

  2. lack of app or Windows updates.

  Try the steps listed here:

  
  Method 1:
  Let's first run the troubleshooter app and check if it helps.

  Solving the problems of the app

  Method 2:
  

  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Note: Try all the steps except convenience store App and those that you have already tried.

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you more.

• Not really a vector file vector file

  Dear Sir.

  I searched for vector files in stock.adobe.com and have downloaded these files, but when I open them on my conputer they weren't of the vector files but foto.

  They are not feasible for me.

  I wish to receive the right vectors from the following:

  Bestandsnr.: 38577409

  Bestandsnr.: 90894805

  with sincere friendships.

  Marielle

  and is it possible to get your email address?

  Hi Helmi,

  It does not seem that you download the files correctly. I tested the two images and was able to download successfully. Please see this topic for more information: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

  And let us know if you need more assistance.

  EBQ

• Error message: Ethernet is not a valid ip address configuration and cannot connect to the Internet after installing Windows 8.

  Original title: Internet not working after installing Windows 8. Help, please

  I installed Windows 8 a week before, which had Windows Vista. When I was with Vista, I had no problem with the Internet, I had. But shortly after I installed Windows 8, the problem began. The connection is hardly 2 minutes. In addition, it is not navigate beyond my home page. After troubleshooting the result came as Ethernet is not a valid ip address configuration. It makes me really frustrated. After all, I was looking forward to navigate in windows 8, this problem makes me think really bad. If someone could help me, it will be grateful to you.

  Manorajan respected,

  I too had d same problem but I solved it later on myself.
  Here's how to: -.
  1-make sure you have intel network driver I installed your windows it pc. Download (on any other pc and transfer and install in it) and install it in your pc respective windows 8. Here is the link to download:-http://drivers.softpedia.com/get/NETWORK-CARD/INTEL/Intel-Network-Adapter-Driver-172-for-Windows-8.shtml
  Den DOWNLOAD realtek lan driver here to install http://drivers.softpedia.com/get/NETWORK-CARD/REALTEK/Intel-Realtek-LAN-Driver-80030730-for-Windows-8.shtml..if in the installation of theres no error ignore it... do not panic and reinstall... as it is already installed

  2 - unplug your LAN cable and Wi - Fi

  3 - go to network and sharing den center left side d click on change adapter settings clik left on the network card intel

  4-go to "Ethernet Adapter local area connection' properties and Deselect"Internet Protocol Version 6 (TCP/IPv6) "

  "5 - Select" ""Protocol Internet Version 4 (TCP/IPv4) '

  Press the properties button

  6 - Select "use the following IP address:" option and set this ips

  IP = "ip address".

  subnet mask = 255.255.255.0

  default gateway = your ip from the router (you can recheck all say on any other pc having a successful conection even wid tell by checking the properties of dial-up connection or any smart phone like any iphone or android mobile, if it is used as a wifi too in led staus/properties to your respective wifi name)

  7. in the second section select "use the following DNS server address:"

  Set "Server DNS PreferAlternate:" your router ip that entered u in "default gateway of" this. " pinterested ok and try to connect in wireless lan