OKR S10-2 problem

Hi, I am using the onekey recovery system to restore to the default factory, but once I click on restore it shows me a message saying:

Fail: 0xE0EF0043 error code

Cannot access the files.

What is going on? What can I do to restore my S10-2? Thank you.

If necessary, they will be formatting the entire hard drive and set factory settings.

before that, you can try to re - install a key recovery.

Tags: Lenovo Notebooks

Similar Questions

  • Sleep with the Ideapad S10-3 problem

    A week barely returned this Ideapad S10 - 3 to the initial state to overcome a problem with mode 'sleep', which has recurred just - worked well in sleep for a few days then back to this question - that's why this message - when I put the netbook to sleep by closing the lid, 2 left lights on the left front light & the system stops responding - only by holding the power button down to kill the system then by restarting the system that reboots can sleep (I put the hybrid sleep system on) extended is the problem solved.

    Ideas to make the system normally sleep?

    Hi pday12au,

    If you are running Windows 7 and Windows Update received before the problem, you can try to perform a system restore (click Start > type System Restore) and disable windows to automatically receive updates (click Start > type Windows Update > choose change settings on the left sablovaseuse) then watch the PC.

    If your system is entirely through Windows Update before the problem, try to apply this "standby" difficulty.

    I hope this helps.

  • S10 - 3T - problem with secondary portrait orientation

    I am new to this community. Several days ago, I got my s10 - 3T. Everything works perfectly so far (Fortunately, I was skilled enough immediately uninstall Veritouch and Veriface), but there's a minor problem: my screen refuses to turn to secondary portrait mode (in tablet mode) or manually (by pressing the spin button) or automatically (gravity). Is this a known problem, or what seems to be a particular fault of my computer?

    I tried to uninstall the Lenovo Screen Rotation program (I'm preinstalled me the 1.0.0.4 version of this program) and to install the 1.0.0.2 version downloaded from here:

    http://consumersupport.Lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=45252

    For some unknown reason, I forgot to remove the program pre-installed via dashboard-> programs: the uninstall process is reported to be finished, but the program remains. Installation of the 1.0.0.2 version over the existing 1.0.0.4 is no results: the version is still not 1.0.0.4 and secondary portrait does not.

    I'd appreciate comments.

    performing the clean install of windows by pressing a button to retrieve key will help you but before this attempt to re - install graphic drivers for card as well.

    also these threads can help you:

    http://Forum.Lenovo.com/T5/IdeaPad-S-series-netbooks/S10-3T-screen-can-not-rotate-automatically/Ta-p...

    http://Forum.Lenovo.com/T5/IdeaPad-S-series-netbooks/S10-how-do-I-rotate-screen-upside-down/m-p/3166...

  • Ideapad S10 battery problem

    I have been using ideapad s10 for two years now... All of a sudden today, the power state shows "ON LINE". Earlier, it will display as "RELOAD".

    And also the remaining battery power is still 56 percent. It does increase not plugged. Can anyone suggest me a solution for this.

    This means that the battery is lose his life?

    Thanks in advance.

    Well Yes,.

    Remove the battery & remove power cord / adapter.

    Then hold the power button for 15 seconds continuously.

    reconnect the battery and AC-

    Empty static.

  • S10 - 3T problem, well, I'm the problem :-)

    Win 7 Home premium, works very well.

    I installed android, and in the process, he asked if I wanted to install grub.  I assumed that grub would take than current windows and he then give me the choice of windows and android started upward.  Evil.

    Grub is enabled and only android and that's all I can get.  I can't get into windows.

    I can get one touch food but don't want to do it if I can avoid it.

    I can enter in Configuration and activate the quick start and quick start will work, but when I go out, he's going to grub/android.

    Anyone know how I can get windows listed in grub, or how to disable grub.

    I installed on the d: partition.

    Thanks for all the ideas.

    The set after a lot of testing.

  • How to partition a hard drive for a B50-70 for Linux? No problem with that?

    Hello

    How to partition a hard drive for a B50-70?

    I want to install Linux and keep Windows 8.1 also.

    This will affect the software factory example: back up hard drive function, OKR?

    Problems partitioning B50 of the 1970s?

    Is it acquisitions have 8.1 Windows on a laptop Lenovo-B50-7?

    What will happen if I got rid of Windows 8.1 operating system?

    Thanks in advance.

    Information on the machine:

    B50-70

    Model name: 20384

    Windows 8.1

    I've not seen / heard of successful use of the flash drive for recovery purposes. The default software using optical disk, when I used it on my G580.

    If your laptop does not have a CD / DVD burner, you may need to contact them directly to discuss this option.

    As to where he is? It is a hidden partition on the hard drive, is usually not accessible.

    Cloning the hard drive can not return to that partition hidden - it would be a little bit the clone of the drive to work.

    I recommend to download your manual of maintenance on the Support site and learn more about the 100% specific for your laptop recovery process.

    CB

  • Y510p does not properly

    So I had this problem with my Y510p slow randomly / freezing. There is no specific program or operations to do it on. It will be sometimes frozen immediately after that I connect and after 5-10 minutes I have to force a stop down. Also about 80% of the time I turn off my laptop it take 5 minutes to 5 hours to extinguish. And no it is not up-to-date, it just display the closing with the balls to do the loop.

    What I tried to ask you. I did OKR twice, the problem occurs with Windows 8 and the 8.1 update. I removed a lot of the bloatware. I disabled the fast storage to intel. I increased the pagefile, I noticed a very slight decline in frequency of things are slowing down and freezing when I put the pagefile on SSD. I've done a few "power fulshes"; Take out the battery, press and hold the power button for 30 seconds, plug the charger, switch on laptop, then reinsert the battery once completed upward. I tried to do the "sfc/scannow" command in the command prompt, yes I opened it as administrator. "Tried" I want to say I typed in it and he said that Windows didn't start the program.

    I was looking for a solution for a while. I know I've tried other things but I do not remember all. If anyone has any ideas I'm game.

    Have you tried to disable expresscache in addition to fast storage? I had the same problems you did, constantly freezing, slow startup upwards and close (hours sometimes, like you have), basically completely unusable. Disabling these two things has removed all the questions I had. Only problem is the SSDS works more like a cache, which is what we paid, so it is not really a 'solution', but hey oh, worked for me.

  • U300s Webcam not working not

    Hello

    I just brought a U300s ultrabook and the webcam stop working. When I use Skype, the only thing that appears on the video configuration is SOURCE of POS and the message "it is not possible to start the video. try closing other programs in use", but there is no other program using the webcam. When I try the internet sites called test my cam, etc. etc., the web cam seems not to work. I installed the cam properly and drivers of energy management. No luck. What could be? If anyone has had this problem please help me.

    Thank you

    Hian,

    Welcome to Lenovo Community!

    Have you tried Fn + Esc to activate the webcam?

    Please check if these knowledge base articles to help you:

    Webcam does not work - ' could not open the camera!

    Lenovo S10-2: Problem Webcam

    Kind regards

    Cleo

  • That's a lot to expect?

    I buy an Ideapad S10e with 2 GB ram and 6 batteries cel. I intend to use it as a computer connected to my "big screen" and on the road.

    I use the computer for internet, word and excel and photoshop sometimes small jobs. That's a lot to expect of a S10?

    (One thing is for sure that the problem of fan has eliminated before that I have to buy one - I've just returned a Dell e4200 because of the fan)

    Thanks in advance for your comments.

    scanboat.com / per Krabbe / Denmark

    The S10 S10e should be able to all the things you have mentioned without any problem. It will work as beautifully with an external monitor to the big screen. If you expect too much, you will not be disappointed because it is not designed as a replacement for a high-end desktop computer or a game machine. Not all of the S10 have problems withd fan because I'm very happy with mine. Perhaps you can test in your local store to see if the fan is really noisy.

  • Recovery of Y570

    Hello to all members of the community.
    Today I ask you for help restoring image default OKR. The problem is that I completely cleaned out the ssd and hdd drives and thus killed OKR 7.0 images. After that, I installed win 7 on my own, but it runs much slower than before after recovery OKR. So the question is where can I get image by default OKR?
    Thank you.

    PS Sorry for my bad English, it is not my mother tongue.

    Contact your lenovo service provider and order the recovery disks factory. Or if you have a friend with the same model of lenovo. create recovery disks OKR factory recovery discs and use them with your laptop.

  • Tecra S10 - problem upgrading to SSD Kingston

    Hello!
    Tecra S10 - I am trying to upgrade HDD to Kingston SSD 128MD.

    During the new installation of Windows 7-64 installer complains that there is no boot device valid to create the system partition, even if the disk is recognized. BIOS is later, I tried configuring IDE and AHCI.

    Is there a problem of General compatibility with SSDS and the notebooks?
    I noticed a similar problem with satellite A200.
    Thank you

    Hello

    How do you update firmware?
    Have you checked if a firmware update is available and necessary?

    Found a page of Kingston providing SSD firmware updates:
    http://www.Kingston.com/en/support/technical/downloads?product=sv100s2&filename=KDID110225a

  • Camileo S10 & video editing problem

    I want to change the video files on device S10. I can see video without problem using ie. WMP, VLC, players etc. but I can not change/convert using any program.
    TmpGenC
    Any Adobe program (audio only)
    Total converter
    other

    Any suggestion?

    Thank you
    Roberto

    Post edited by: uregiun

    Try AVS Video converter 6.3.

  • Tecra S10 - 123 and Linux Mandriva boot problem

    I have a Tecra S10 - 123 for two months and wanted to install Mandriva on it (I have no experience with Linux...). I burn the Image on Cd image .iso file and changed the bios settings to boot from the CD-ROM. It works without problem, but Mandriva stops to boot from the Live Cd once the kernel is loaded.

    What can I do?

    Maybe it's a SATA question, have you tried to set the SATA Mode in the BIOS to "COMPATIBILITY"?

    Work the other flavors of Linux? Maybe Ubuntu will install properly.

  • Tecra S10 - 10F - Support Button Multimedia problem

    Hello

    I have Toshiba Tecra S10-10th with Win Vista SP2.
    I have problem with Toshiba button Support.
    After a clean install of Vista, everything works fine. Now two buttons next to the button toshiba walk / stop don't work. When I uninstalled 'toshiba value added package', buttons was answered but open "windows Mobility Center.

    When I installed Toshiba value added Pachage once again, the buttons are no longer...

    Could someone help me pls?

    THX

    Hello

    This strange s
    Usually the installation of VAP should help you get the buttons working again.
    Value added package contains tools and utilities that are necessary for the functionality of the multimedia buttons

    Please install the VAP, and then configure the keys still using the utility button Toshiba located in Toshiba Assist-> optimize

    There you have to click on the button, and then you set some for some exe file button.
    Single exe files are in C:\Programs\Toshiba\TBS

    Welcome them

  • Tecra S10 - e-SATA with WD MyBook problem

    I have Tecra S10-10 loaded with win 7/32 final. From the beginning, there is fixation e-sata WD MyBook problem - most of the time cannot be reached
    and Device Manager hangs up refreshing devices. Only restart after sometimes he can be attached, but only those by boot allows. All other devices works fine. Before win 7
    I worked with XP no problem also.

    I tried to update the drivers for the chipset for win 7 - but it failed with the message that this computer does not meet the minimum requirements.
    The BIOS is 2.0. Trying to upgrade the BIOS to 3.0, he replied that Intel TXT must be disabled, but it is set in the BIOS, option cannot be selected.

    No idea how to fix e-sata?

    Hi Damir

    As I see that you do have a general problem with e-SATA, but just when you want to use this device to some so I think that the solution is not so easy.
    This device is not known to me, but I suppose you guessed it with USB cable. You can use it with any other standard USB port?

Maybe you are looking for