Tecra S10 - 10F - Support Button Multimedia problem

Similar Questions

• Tecra S10 - 10F - need Server 2003 or 2008 LAN driver

  I'm looking for a driver lan for Toshiba S10 - 10F for Windows Server 2003 or 2008.
  Or at least, I would like to know the model of network card.

  Thank you

  Toshiba doesn't support an OS Server on laptops, so you will not find such a driver on the Toshiba site.

  You can try to search for a driver on the site of the factory. As far as I know that the Tecra S10 has a Intel LAN card while you should search on the Intel site [www.intel.com]

  In addition, you can try to use the XP Server 2003 driver and driver Vista for Server 2008. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• Tecra S10-10th revision necessary

  Hello
  Does anyone found a review for the Toshiba Tecra S10 - 10F P8600?

  Hello

  I found a few details on the Tecra S10 - 10F
  http://www.Toshiba.com.HR/PDF/Tecra%20S10-10E.PDF

  But if you need some outside opinions on this laptop then I would recommend using Google search engine.

  I also recommend checking out Toshiba product page:
  http://EU.computers.Toshiba-Europe.com-> Laptos-> Tecra-Tecra S10-> Tecra S10 - 10F series >

  Welcome them

• Tecra S10 - problem upgrading to SSD Kingston

  Hello!
  Tecra S10 - I am trying to upgrade HDD to Kingston SSD 128MD.

  During the new installation of Windows 7-64 installer complains that there is no boot device valid to create the system partition, even if the disk is recognized. BIOS is later, I tried configuring IDE and AHCI.

  Is there a problem of General compatibility with SSDS and the notebooks?
  I noticed a similar problem with satellite A200.
  Thank you

  Hello

  How do you update firmware?
  Have you checked if a firmware update is available and necessary?

  Found a page of Kingston providing SSD firmware updates:
  http://www.Kingston.com/en/support/technical/downloads?product=sv100s2&filename=KDID110225a

• Tecra S10 - 123 and Linux Mandriva boot problem

  I have a Tecra S10 - 123 for two months and wanted to install Mandriva on it (I have no experience with Linux...). I burn the Image on Cd image .iso file and changed the bios settings to boot from the CD-ROM. It works without problem, but Mandriva stops to boot from the Live Cd once the kernel is loaded.

  What can I do?

  Maybe it's a SATA question, have you tried to set the SATA Mode in the BIOS to "COMPATIBILITY"?

  Work the other flavors of Linux? Maybe Ubuntu will install properly.

• Tecra S10 - e-SATA with WD MyBook problem

  I have Tecra S10-10 loaded with win 7/32 final. From the beginning, there is fixation e-sata WD MyBook problem - most of the time cannot be reached
  and Device Manager hangs up refreshing devices. Only restart after sometimes he can be attached, but only those by boot allows. All other devices works fine. Before win 7
  I worked with XP no problem also.

  I tried to update the drivers for the chipset for win 7 - but it failed with the message that this computer does not meet the minimum requirements.
  The BIOS is 2.0. Trying to upgrade the BIOS to 3.0, he replied that Intel TXT must be disabled, but it is set in the BIOS, option cannot be selected.

  No idea how to fix e-sata?

  Hi Damir

  As I see that you do have a general problem with e-SATA, but just when you want to use this device to some so I think that the solution is not so easy.
  This device is not known to me, but I suppose you guessed it with USB cable. You can use it with any other standard USB port?

• Re: Tecra S10 disorders with drivers

  Hey

  I have on my Tecra S10 (PTSB3E) Windows 7 64 bit installed.
  In Device Manager, I have the "PCI Communicationscontroller" without the appropriate driver. What I have to do, that this element gets the correct driver?

  A Secoud problem is with my docking station. I have the PA3680E. When I have my S10 anchored on the station, I have another device without the correct driver. The USB-serial controller. Also the fingerprint reader - Gets an error when I run the application.

  Can someone help me get the correct insalled in the system?

  Thank you
  Thomas

  Hello

  Who knows what you have installed and what are the missing drivers.
  Here is the order of installation for your computer laptop tecra. Check it out to see if everything is installed or not:

  Win7
  Chipset utility
  Matrix Storage Manager
  TOSHIBA Value Added Package
  Installation of the PVAT button setting
  Display driver
  Realtek HD Audio Driver
  ALPS Pointing-device Driver
  TOSHIBA software modem
  Driver LAN (EnergyStar support)
  Wireless LAN driver
  Bluetooth Stack for Windows by Toshiba
  Intel AMT Management Engine Interface
  RICOH Media Driver
  O2Micro smart card reader driver
  TOSHIBA SD Memory utilities
  TOSHIBA SD Memory Boot Utility
  Logon Key TOSHIBA wireless
  180 degree TOSHIBA Rotation utility
  TOSHIBA HDD Protection
  TOSHIBA ConfigFree
  TOSHIBA WPS library
  TOSHIBA management console
  TOSHIBA Assist
  TOSHIBA security assist
  Pilot TRS for study
  CD/DVD Drive Acoustic Silencer
  Infineon Trusted Platform Module utility
  Infineon TPM (Trusted Platform Module) installation guide
  AuthenTec fingerprint utility
  Chicony Camera Assistant Software
  TOSHIBA face recognition
  TOSHIBA SSD alert
  TOSHIBA PC Health Monitor
  TPCHFsDate.exe for PC Health Monitor
  TOSHIBA cooling Performance diagnosis
  TOSHIBA Consumtion wattmeter
  Sleep USB TOSHIBA and service charges

  All orders must be installed in that order. If missing some driver on this list try please install the driver for Vista 64 bit.

• Issues of update/upgrade of equipment for Tecra S10-183

  Hello

  TOSHIBA TECRA S10-183
  Serial number: xxxxxxxxxxxxxxxxxxxxx
  Model number: PTSB3E-0YR04KGR
  Code BTO: P8700/2G/160G/15.4WBT/DS2/L/M/B/W/3G
  Pre-installed software: Yes [R11382GR]
  Purchase date: 13/05/2011

  I use above professional mobile phone use for CAD programming as well as for Office applications.
  2 GB RAM (standard), I can increase up to 4 GB Kingston (ex aequo) on purchase.
  With the 160 GB HARD drive, I had a lot at the beginning of the loss of speed.
  So I leave a month later to a switch of OCZ Vertex 120 GB of a second
  And lasted almost 9 months without problems.
  Now, I don't have so much free space in my SDS. So I would like to
  'Intel SSD 520 Series 240 GB 2.5 SATA III'
  Skip the leave.

  My question would be, I would get this problem?
  (1) in theory, SATA3 work perfectly well this SSD 240 GB right?
  In the manual, it is up to 120 GB SATA2 SSD in it. However, the 2009 manual. The information is very old. And at that time were not yet 240 GB free for end users of hard drives SSD SATA3.

  (2) is there any Windows Professional / Ultimate / Business 64 for 7 as this laptop?
  Original, I have Windows 7 Ultimate 32 bit. I wanted that my memory that expanded up to 8 GB. CAD program running on the 64-bit operating system much better.

  (3) is the card graphic and/or welded directly on my cell or can I leave replace it? It is a plug-in card?

  (4) can I switch to a processor / CPU? What size?

  (5) the Mobile UMTS and HSDPA / HSPAU / LTE is capable?

  (6) I still can't be on the Toshiba support site:
  http://de.computers.Toshiba-Europe.com/innovation/generic/SUPPORT_PORTAL/
  find when you enter the serial number or model number is not my laptop?

  On a response, I would be very happy.

  Sorry for the bad English. My language is German!

  So I hope that someone can help me with my questions.

  With sincere friendships.

  Etem Basoglu

  > 1) in theory, SATA3 work perfectly well this SSD 240 GB right?
  > Manually, it is up to 120 GB SATA2 SSD in it. However, the 2009 manual. The information is very old. And at that time were not yet 240 GB free for end users of hard drives SSD SATA3.

  The SATA controller is not limited in size, you can use 250 GB, 500 GB or more large hard disks. The same should be possible with SSD drives since the controller is the same.

  (> 2) is there any Windows Professional / Ultimate / Business 64 for 7 as this laptop?
  > Original, I have Windows 7 Ultimate 32 bit. I wanted that my memory that expanded up to 8 GB. CAD program running on the 64-bit operating system much better.

  Don't know what you mean exactly, but if you want to installed Win 7 64 bit, then you can do without big problems the 64-bit drivers are available on the European driver Toshiba page.

  (> 3) is the card graphic and/or welded directly on my cell or can I leave replace it? It is a plug-in card?
  The laptop seems to be equipped with a NVIDIA Quadro NVS 150 M chip graphic. This is an external chip that is connected/soldered on the motherboard. But even if you can remove this chip, the upgrade is NOT possible.

  (> 4) can I switch to a processor / CPU? What size?
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  Generally the CPU upgrade depends on the chipset of the motherboard.
  You could upgrade the processor, if the chipset would support the new processor.
  There are still questions about BIOS support, but I've read here in the forum that some people have been able to upgrade the new processor.

  (> 5) the Mobile UMTS and HSDPA / HSPAU / LTE is capable?
  Support for 3G modules appears to support the HSDPA standard

  (> 6) I still can't get on the Toshiba support site:
  > http://de.computers.toshiba-europe.com/innovation/generic/SUPPORT_PORTAL/
  > find when you enter the serial number or model number is not my laptop?

  Maybe it is not inserted into the database, but your Tecra S10-183 belongs to the series of PTSB3E that you can search other models belonging to the PTSB3E for details

• Two screens DVI on Port Replicator II with Tecra S10-160

  Hello to all 2!

  Right now I'm working with two external 19 "TFT screens connected to the Port Replicator II (Tecra S10-160 inside with closed screen). A display is connected to the DVI port available, the other is connected on the available on the Port Replicator II VGA port.
  A single display (DVI) is used as the main office, the other (VGA) is used as office improved (both show different content).

  My problem is the poor quality of the VGA signal and the problem, my two new screens are only supported DVI.

  Is it possible to connect two DVI displays to the DVI - D Port Replicator II? I already checked several DVI-Y-cables, but I'm still looking for a solution connect two displays via DVI with the function to get two split screens and not the same content on both screens.

  Hope you got my point and have information or ideas for products for me.
  Thanks in advance.

  Hello

  Have you already tested a VGA to DVI? So, you can use the VGA connector on the port replicator and your monitor's DVI port.

  I mean such a cable like this

  Such an adapter you can always use the function to get two split screens and not the same content on both screens. :)

• Re: Tecra S10 and S11 freeze randomly

  We have several Tecra S10 and S11. Freezing randomly during the day. Some even twice within half an hour, others spread it throughout the day.

  The Tecra is all Windows 7. Some have 64 bit, others a 32-bit installation. After installation of Windows 7, we have removed additional software we don't need, like McAfee, Toshiba goodies (Assist, Tempro, etc.), Ebay, etc. After that we activatie Office 2007 and Microsoft put updated laptops. So far so good.

  However, after a week or two just work in Word causes the Tecra to freeze. Same ctrl + alt + delete does not work. The Tecra should be forced to turn off the power, press and hold the power button.

  Everyone recognizes these "frozen moments". It's very annoying.

  It is not easy to say why this is happening.
  Always it is that Office is preinstalled on almost all laptops Toshiba so I did not thing your laptops can be somewhat different.

  Maybe something else responsible for this?
  Maybe are all connected to your business LAN and there is a problem.
  Are connected external devices which can be responsible for this?
  Maybe some internal software of the company is blocking something.

  It is not easy to say what he can be.

  Have you done tests in the past to see what can be the problem?

• Tecra S10 - CAD and 3D software compatibility

  Hello
  It seems that the graphics card in my Tecra S10 - A11 has problems with software like Autocad 2009 or Rhino 4. The card is a nVidia quatro NVS 150 M. Cursors in these programs are slow or flashing. Y at - it a solutiun known to this problem, because I found a lot of similar problems on various forums, but I didn't find any solution.

  I never thought that a cell phone in this category would have had such problems. But if the GPU is really incapable of managing these programs at a level that I feel really disappointed.

  Hello

  In your case, I would check if the graphics card driver can be improved and what Autocad 2009 support is recommended.

  Possibly Autocad 2009 needs some version of driver?
  Has been installed the latest BIOS? Check it!

• Tecra S10: BSOD when inserting adapter duo memoystick in the card reader

  Hello

  I have a Tecra S10-12 b PTS3BE.
  As soon as I insert a memorystick duo desk with or without a memorystick inside in my card reader, I get a BSOD.
  Similar to the user in this topic: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=165760
  Unfortunately the user did not post a link for the driver that solves the problem.
  I've updated to the latest driver for the controller card on the Toshiba site reader: Ricoh 3.54.04 however no change.
  Can someone suggest another pilot to try? I tried searching the site Web of Ricoh download but have not found anything useful.
  Any help appreciated as I now have to use the USB cable to transfer my photos :(
  FYI, SD card works fine.

  Hello

  I have no idea of what OS you use but the card reader controller
  Driver for Win XP downloaded on 15-10-09. It seems that it s among the newer versions. This time it s a 3.54.04.

  I think that you will not find a more recent version

  PS: Check if you BIOS is up to date. If this is not the case, the update.
  Moreover, as far as I know that not all card sizes are supported maybe you should try another card with the smallest size.

• Tecra S10: undefined screen with a resolution of 1280 x 800

  Hi all,

  I have a strange problem with the resolution of my Tecra S10.

  My system:

  * Windows Vista, later lowered to Windows XP SP3 with the last update
  * Latest Toshiba nvidia drivers

  My default resolution is 1680 x 1050 initially and the display is sharp and perfect proportional to the screen (15.4 ", 16Million color), even if the icons are quite small.

  I changed my resolution of 1280 x 800 using the steps described in the user manual. But the screen is fuzzy and ill-defined.
  According to the manual of Toshiba (Tecra S10 Satellite Pro S300) my NVidia video card supports the resolution of 1280 x 800 WXGA mode.

  How can I put mode WXGA?

  I appreciate all suggestions that solves the problem.

  Best regards
  Biagio

  Hello

  To be honest you write on this is certainly not a problem but something usual for views. The display will be sharp and perfect when you set the view to the native resolution only.
  If you choose some other low or high resolution the illustrious office will be either too big (does not fit in the display) or will be blurred.

  The same situation is on my Tecra M1. Test it on all laptops, and the situation will be the same. I'm now working on Satellite P200 with 17 inch screen. For this display's native resolution is 1440 x 900.
  When I reduce the resolution the office is always fuzzy and ill-defined.

• Windows7 for Tecra S10

  I have Tecra S10 - 11A.
  My laptop supports windows 7? If that's what about additional programs as utility HARD drive protection, software fingerprint, pc monitor.

  Where can I download them?

  According to information document http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm Toshiba Tecra S10 is Win7 supported.
  I checked the Toshiba Win7 download under http://eu.computers.toshiba-europe.com/innovation/windows7_drivers.jsp page and your laptop model is still not listed there.
  Occasionally check this page to see if the drivers are available.

  For models Toshiba laptops will offer all the drivers, tools and utilities for Win7. So you will not have problems to run all the things you asked for.

• Tecra S10 - 11W: how to uninstall Win XP SP3

  I have successfully completed my Tecra S10 - 11W from Vista to XP with the recovery CD
  But since XP SP3 (had) problems with some software I want to uninstall it and install SP2.
  But even with the information from the Microsoft Web site, I was unable to uninstall SP3!

  Hello

  I put t know if it would be possible to remove the SP3 if it was not previously installed.
  But I found that MS document:

  + How to remove Windows XP Service Pack 3 from your computer.
  http://support.Microsoft.com/kb/950249

  Perhaps, it might be useful.