S10 - 3T - problem with secondary portrait orientation

Similar Questions

• Problems with secondary after building the application .exe

  Hi people,

  as I like am a self taught Newbie on LV and TestStand I have some problems with the construction of an exe file.

  I don't know if it is a question of LabVIEW and TestStand, so I posted this question in the two Forums.

  I use the interface simple chart that came with Teststand and added a secondary. TestStand is supposed to open the called VIs dynamically in this secondary.

  I used the code from the tutorial respective http://zone.ni.com/devzone/cda/epd/p/id/6278

  Everything works fine until I build the application. The screws are then open in pop-up windows clean AND in high school, but only the popup version is usable.

  I hope that I am too dumb to find the answer and that there will be a quick solution.

  If you have built the exe in LabVIEW 2009 selected in the configuration of your adapter TestStand and LabVIEW 2009 and your screws have been opened and saved in 2009 LV?

  

• I use word for mac and have problems with Hebrew and orientation of the text from right to left

  Hello

  I use Word for Mac on my MacBook (version 10.11). I have problems setting the orientation of the text of the Hebrew version.

  Where can I find the icon for the orientation of the text? (not like the alignment)

  It doesn't look like Word for Mac has the RTL support. See the first response to this which Hebrew fonts program works well on a mac - to write Hebrew texts or insert the Hebrew into English documents? post for some alternatives.

• Problems with secondary toolbars in Photoshop CC 2014.

  Some of my toolbars have stopped working.  For example, in the past when I used the quick selection tool a secondary tool bar, under the main top toolbar, send me options to add, subtract, etc from selection.  Now I don't see the side toolbar.  Do not see it on any of the action items... The culture used to give me report options and an option to accept, not there now.  I am running Windows 8.1 and the only recent change I did was download Lightroom CC 2015 (which should not affect PS).  Any suggestions?

  I think what you call high school's Toolbar Options bar.

  To make it visible, go to the window and low wear the bottom of the dropdown Options check mark

• Tecra S10 - e-SATA with WD MyBook problem

  I have Tecra S10-10 loaded with win 7/32 final. From the beginning, there is fixation e-sata WD MyBook problem - most of the time cannot be reached
  and Device Manager hangs up refreshing devices. Only restart after sometimes he can be attached, but only those by boot allows. All other devices works fine. Before win 7
  I worked with XP no problem also.

  I tried to update the drivers for the chipset for win 7 - but it failed with the message that this computer does not meet the minimum requirements.
  The BIOS is 2.0. Trying to upgrade the BIOS to 3.0, he replied that Intel TXT must be disabled, but it is set in the BIOS, option cannot be selected.

  No idea how to fix e-sata?

  Hi Damir

  As I see that you do have a general problem with e-SATA, but just when you want to use this device to some so I think that the solution is not so easy.
  This device is not known to me, but I suppose you guessed it with USB cable. You can use it with any other standard USB port?

• Sleep with the Ideapad S10-3 problem

  A week barely returned this Ideapad S10 - 3 to the initial state to overcome a problem with mode 'sleep', which has recurred just - worked well in sleep for a few days then back to this question - that's why this message - when I put the netbook to sleep by closing the lid, 2 left lights on the left front light & the system stops responding - only by holding the power button down to kill the system then by restarting the system that reboots can sleep (I put the hybrid sleep system on) extended is the problem solved.

  Ideas to make the system normally sleep?

  Hi pday12au,

  If you are running Windows 7 and Windows Update received before the problem, you can try to perform a system restore (click Start > type System Restore) and disable windows to automatically receive updates (click Start > type Windows Update > choose change settings on the left sablovaseuse) then watch the PC.

  If your system is entirely through Windows Update before the problem, try to apply this "standby" difficulty.

  I hope this helps.

• problem with the orientation of the photo (angle) to be imported into lightroom (4 / 5)

  Hello

  I have a problem with importing the photos a few months. Lightroom import photos with a tilt, randomly. You can see a few examples below. I can't fix with the tool from lightroom without lost of my picture.

  I use a pc running windows 7. I try different versions of Lightroom (4 and 5). I delete the photos and I re - import. In fact, I have the 5.7.1 version of lightroom. When I use another app to view photos (picasa or other), there is no problem. This problem will appear approximately in November 2014. I guess (I'm not sure) after changing the lightroom version (5.5-> 5.6). I have always used the same camera, a sony rx100.

  It's really a problem for my panorama!

  If someone has an idea, it will be great!

  Thank you for reading this message. I apologize for my bad English

  Fred

  

  It is unlikely that either recorded in a processing defect, or included in a "Preset" called import, or otherwise, you have "Vertical" lit.

  It is in the Panel of correction lenses - Basic tab. It is analyzing the contents of each picture and evaluate what he thinks may be a horizon of a coherent perspective / vertical / flatness (there are a few options for how it then corrects the image in response to this).

  To check which of the above two possibilities is the case: you can make a virtual copy of an image and then reset it. If the image shows still turned in this same way, then standing is active in the default treatment that apply to this particular image. If standing had been arrested in these default values, then Reset would have stopped it for this photo. Uncheck standing and then re-save the default processing.

  If when reset, the image of straightening / rotation does NOT - then it's probably a develop preset that you use when importing, or subsequently. When you manually apply this setting, the image goes as shown: you have confirmed this preset to be "at fault". Update of this preset, unchecking standing. When used on the new images below, this vertical analysis and correction will not be made.

  Vertical is IMO something you are likely to want to frame-by-frame, if necessary - and do not occur in all areas. But the lens profile and correction of CA CAN apply by default, without bad effects, in my experience.

• Dell MDS14 Dual Monitor Stand, Portrait orientation?

  Hi all there a Dell MDS14 Dual Monitor Stand. I just want to confirm if one of the monitors can be in portrait orientation?

  I want to mount one 24 inches horizontally and the other 24 inches in portrait mode.

  Thanks in advance.

  If anyone is interested, Yes, you can mount the monitor in portrait mode using the included vesa plate.

  All you need to do is fix the vesa plate in the necessary direction and fix.

  The only issue is that it adds about 5mm is not Ras if you align perfectly flat monitors horizontally.

  But if use you it like me and have a slight angle inward at the portrait screen it's a problem no.

  PS, if you need to rinse, you can always mount two monitors with vesa :) plate

• Detect peripheral photos on BB10 portrait orientation?

  It seems that every time I load a camera in a portrait-oriented file element via javascript on my Z10, it always shows portrait photo dimensions width > height, it displays on the side.

  Also, if I can access files camera Z10 via my PC, it also shows photos portrait on the side (and assorted dimensions of a width > height).

  Screenshots taken in portrait mode works very well. It is just a problem with the photos from the camera, apparently.

  Exactly the same code works fine on the PlayBook however, correctly showing photos of two elements img and portrait when you access from a PC.

  Known bug? Is there a workaround, or a way for me to detect the expected orientation in addition to the comparison of width and height?

  Hi BBKate,

  The rotation data for images taken with the camera are stored as EXIF data, which requires the "app" (in this case browser/webworks) read EXIF and turn.

  He is currently in the works, but take a look at the following article on the reading of the EXIF data, where you can run yourself:

  http://devBlog.BlackBerry.com/2013/04/blackberry10-webdev-EXIF/

• Problem with IMovie and Quick time

  Hey everybody,

  I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  Could someone please help me solve this problem?

  Thank you very much in advance.

  Concerning

  Could someone please help me solve this problem?

  Not only based on what you already said.

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  

• The response of the cmd + 0 does not work. Is a problem with Safari or Opera or Mac Mail :)

  Try harder. But don't feel put out. The Mac never falls down. I have used them for decades and prefer the Mac. But I fell it twice before last weekend. Try to load Imaging Neuroscience with Matlab Run Time software. At the Apple machine. Nice guy, Henry. Could not diagnose the problem. Did a clean install. Migrated to OS X10.10. Do not like. I always have problems with the machine. But I love the machine. I hate using my machine BACK. Next to neuroscience, software that I use is an open software and UNIX oriented that meets the very good command line. A large part of the software is not ready pour.10 big but worked sur.9. Well, that is until the breaks down. Of the accident, well is the lesson for me, if you crash, debugging and do not go on to the next task until you have solved. Work with Apple with the report of accident in front of you.

  You know, in the part of Oscar Wilde, the Importance of being consistent, he tells Lady Bracknell that he lost both his parents. "For losing a parent can be regarded as a misfortune." But lost both parents statement of negligence. "Yes, two accidents. Shame on me.

  Well, we have all learned, don't we?

  Great to have this forum, however. Yay! Snoop by clicking his heels in glee.

  Instead of a completely clean reinstall, consider trying a drink first. It will at least save your bookmarks and passwords that you may be saved. This article has more information: Refresh Firefox – reset settings and Add-ons.

  If you really want to divert your existing settings, you can use the Profile Manager to start a new settings file. This article has the info on it: use the Profile Manager to create and delete profiles Firefox. I suggest NOT to delete your old profile immediately in case you realize is there irreplaceable data.

• Z210: Bad support/problem with recovery of an Z210 system when changing the RAID configuration backup

  My Z210 accompanies stripped Bay RAID-0, which currently consists of 2 x 1 TB HDD where the OS partition. I want to change that in RAID-1 mirror, but as the application of TSRI does no such RAID level migration, I thought I would try another approach.

  As a solution, I'd do a backup using the Windows backup and restore application. Then, I would change the table using the Boot ROM TSRI before restoring the backup to this new array. But obviously backup 1.9 TB in a table of 932GB will not

  So, to make a backup, I firstly disabled 'System Protection' and the file 'Page '. This allowed me to reduce the OS partition to about 50 GB using disk management. Then I re - activate 'System Protection' and the 'Page file' before making the backup and the creation of a system recovery disk. This resulted in a backup of 35 GB that I stocked up on a USB external drive. And now a backup of 35 GB can fit on my reconfigured 932GB RAID - 1 mirror

  As such, I cold booted my system and during the boot process, I pressed CTRL-I to get the State of mind RAID Intel Boot ROM. you, CTRL-I've worked only if I started cold and the HP USB keyboard directly connected the first USB slot at the back of the system. The first USB slot is at the top left when you look at the back with the portrait of the tower. Connect the HP USB keyboard in USB port or in the hub of my Dell monitor does not allow me to access the ROM to Boot Intel RAID!

  HP should really study this fault

  In any case, when I could access the Intel RAID Boot ROM, I deleted the RAID-0 stripped existing and created a new RAID-1 mirror. Obviously, the process is destructive and wipe the BONES of the table but that's what my backup was to

  Then I started on the Windows system recovery disk, plugged the USB external drive and proceeded to recover my system.

  Everything worked as expected with the operating system partition uses about 50 GB. A simple trip to disk management enabled me to extend the volume to occupy the space allocated, as presented by the RAID-1 array. As such, I find myself with about 932 GB partition that appear in the windows disk management tool. After a check disk and reboot (which fixed some minor issues) all seemed well.

  But no, everything was fine

  Well that ROM boot RAID Intel sees that a mirror RAID-1 about 932 GB and the operating system sees a partition about 932 GB, both as expected, demand for Intel RST in windows States the following:

  

  I don't seem to have indication of what type of table, it is, an options to change the name of the table or an option to check the integrity of the array through the TSRI application in windows. If something is screwed

  But after the update for the application of iRST version 10.6.0.1002 Intel (the newest HP of) version 11.2.0.1006 (version Intel got very practice), the question seems to correct itself. Now the RAID, Windows boot ROM and the request of TSRI in Windows all agree that the table is indeed a mirror RAID-1 932 GB.

  

  I don't know what caused the problem, if it's related to something that was wrong with the process that I used, if she is simply resolved by reinstalling driver, or if this is a fix for a known issue that Intel has included in their questions later from the pilot.

  But what I know is that Intel has resolved a number of issues in the version 12.9.0.1001 driver (which is the latest version for the Cougar Point chipsets) compared to the old driver version 10.6.0.1002 HP has on its support page for the Z210.

  And HP seems unwavering in his lack of interest in the Intels 12.9.0.1001 test pilot and then make it available on its support page for what is a product still under warranty

  It is a mediocre service if you ask me...

  Some HP forum administrator or HP support person hide these forums should impose it in the HP management station and get it looked at. The Z210 is still under warranty for some customers and HP needs to pick up the latest drivers available to all suppliers, test them and then release them to their customers via the support page for this product. All the rest is little change us all.

  I was able to resolve the application problem Intel RST by updating to the latest v11.2.0.1006 Intel driver but it has highlighted a few points that HP should address, see linked post above.

  PS: Add this post so I can mark the thread as solved.

• Tecra S10: undefined screen with a resolution of 1280 x 800

  Hi all,

  I have a strange problem with the resolution of my Tecra S10.

  My system:

  * Windows Vista, later lowered to Windows XP SP3 with the last update
  * Latest Toshiba nvidia drivers

  My default resolution is 1680 x 1050 initially and the display is sharp and perfect proportional to the screen (15.4 ", 16Million color), even if the icons are quite small.

  I changed my resolution of 1280 x 800 using the steps described in the user manual. But the screen is fuzzy and ill-defined.
  According to the manual of Toshiba (Tecra S10 Satellite Pro S300) my NVidia video card supports the resolution of 1280 x 800 WXGA mode.

  How can I put mode WXGA?

  I appreciate all suggestions that solves the problem.

  Best regards
  Biagio

  Hello

  To be honest you write on this is certainly not a problem but something usual for views. The display will be sharp and perfect when you set the view to the native resolution only.
  If you choose some other low or high resolution the illustrious office will be either too big (does not fit in the display) or will be blurred.

  The same situation is on my Tecra M1. Test it on all laptops, and the situation will be the same. I'm now working on Satellite P200 with 17 inch screen. For this display's native resolution is 1440 x 900.
  When I reduce the resolution the office is always fuzzy and ill-defined.

• Problems with drive HARD Toshiba MK1234GSX

  Hello

  I have an Acer with a secondary HD TOSHIBA MK1234GSX 9920.
  Since I installed Windows 7, I have problems with the HD.
  Upon restart, the HD is considered as having problems with windows: when I look in device management, I have this message "Windows has stopped this device cause it has problems. (Code 43) »
  I did a full scan (chkdsk), but no not found errors.
  If I turn off the HD, reactivate and restart, sometimes I can access the HD which works perfectly.
  Does anyone have an idea on this?
  Thank you.

  PS: Sorry for my English :)

  CHKDSK is not good to test a HARD drive for bad sectors, its only good when looking for errors of the filesystem (FAT32 or NTFS).

  Test the hard drive to find errors using DFT.
  DFT download: http://www.hitachigst.com/hdd/support/download.htm#DFT

  Download the ISO file and burn it to a CD - R disc (there is also a version on disk if it's easier).
  If you don't know how to burn an ISO file, read this guide: http://www.petri.co.il/how_to_write_iso_files_to_cd.htm
  Restart your laptop and boot from the disc of DFT.
  Choose the 'Advanced' test and let it run (it may take an hour or two).
  If you see a message in red box, the HARD drive is faulty.
  An error code 0 x 70 means there are bad sectors and the HARD drive needs to be replaced.

• Problem with safari loading

  Hello. I was searching on the web and I don't know how, but I could not load other pages.

  The problem is: my site camputer will complete but after that show noting loading. Only a blank page.

  so I opened firefox on mac, but still noting rest then my camputer but has changed and after that I stopped and reset and then reset smc, finally, I ran disk utility and no thing changed.

  I have to say two things:

  some sites like google or wiki will open but page even apple is not.

  I can't open all the pages with windows and iphone so no problem with the network.

  Thank you for helping me

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.