Old system back after the upgrade.

Similar Questions

• Where are my old site definitions after the upgrade?

  I just upgraded from 5.5 to the 2014 CC and now in Dreamweaver CS, none of my site definitions are here. What I have to start from scratch creating sites for all my sites and I can import them somewhere? Thank you.

  It's pretty simple to put on the sites...

  1. open the old DW

  2. Choose Site > Manage Sites > highlight sites > Export

  3. This will create your site settings .ste files

  4. close the old DW and open DW CC 2015

  5. go on the Site > Manage Sites > Import to import the .ste files

  Who's going to do.

• After the upgrade to windows 7 to 10 windows, can I go back to windows 7 and upgrade will it effect other already installed OS like ubuntu?

  I got the upgrade notification windows 10 and I booked it. Is to show that after July 29, it will download a 3 GB file and then it will move to windows 10.

  I have two questions-

  • Once upgrade of windows 7 windows 10, is it possible to get back to it in windows 7? I certainly do not want to reinstall windows 7 again. [after the upgrade to windows 10, both windows 7 & 10 windows will always be in my system?]  ]
  • I have two OS on my system - window 7 and ubuntu 14.04 [both are level of OS boot ] it will make my Ubuntu OS during the upgrade of windows 10.

  Yes, you can restore it will affect the Ubuntu:

  Can I uninstall Windows 10 if I do not like it or something is wrong?

  Yes, you can see the following: how: go back to an earlier version of Windows from Windows 10

  Please note:

  Backing up your computer:
  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  Also check:

  How to back up and restore your files manually

  How to: build 10 tips before installing the latest version of Windows 10

  How to: 10 things to do if the Windows 10 install fails.

  Once you have installed these important updates and followed the required steps, you should be ready to receive your free Windows 10 update this summer.

• Unable to activate Windows 7 Pro after the upgrade of the system

  Old Config: Celeron / 2 GB / 40 GB. -Win7Pro retail trade / retail Office10H & B

  New Config: i3 / 2GB / 500GB. -Win7Pro retail trade / retail Office10H & B

  Windows worked perfect (but slow). I have updated the comp & installed fresh from the same media. Old hard drive is formatted. Office activated. but windows gives the error "the product key you entered cannot be used to activate windows on this computer". I tried the online activation & the phone activation. for only informed 10 days for activation. Help, please.

  Try the phone activation once again:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If this does not work, try direct telephone activation:

  Direct activation number: (888) 725-1047

  1-800-936-5700

  If the copy of Windows 7 that you installed an upgrade, please note the following:

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• After the upgrade to Vista SP2, about 8 GB of space is missing? I run diskcleanup. Y at - it something like windows7 "clean system files" for Vista?

  After the upgrade to vista sp2, about 8 GB of sbace is missing? I run diskcleanup. Y at - it something like windows7 "clean system files" for Vista?

  Hello

  see if this program helps you to determine what is take up space

  http://www.Jam-software.com/treesize_personal/

  by default system restore will have up to 15% of the capacity of the hard disk

  you would like to reduce this amount

  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

  http://www.vista4beginners.com/system-restore-space-used

  also use disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:

  • Programs and features. Open programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.

  • System Restore and shadow copies. Guests delete you all but the most recent restore point on the disc.

  also scan for malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  and read these information from microsoft on windows optimization

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• DVD player not recognized after the upgrade to windows 8

  I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

  I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

  The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

  My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

  I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

  OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

  OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

  I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

  Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

• Cannot connect to more than one mail account after the upgrade to Sierra

  I have several provided ISP e-mail accounts that work successfully for a long time on elCapitan.  After the upgrade to Sierra this afternoon cannot connect all accounts and I asks me to enter the password.  Why isn't Sierra pick up the passwords of my trousseau?

  Oddly enough, my Hotmail account seems to be ok.

  How can I fix this without having to re - enter all passwords?

  As a result of the foregoing, I found that my connection Keyring contains entries for all of my email accounts.  However, these dates are back in July 2011.

  After an episode of lost or stolen iphone, I had to update all of my passwords by e-mail in February this year (2016).

  Search in my keychain, I found dated entries for my email accounts in iCloud Keychain section.  I don't think that I never activated iCloud for my email.

  How the entires of e-mail account eventually sub iCloud and why the old entries from email account not updated?

• After the upgrade to v10 folders appear, but nothing happens when I click on the folder

  I organize my favorites in all 7 or 8 files. After the upgrade to Firefox v10 a few days ago, I find that the records are still on the list but that it will be will not develop. When I open the bookmarks library and select a record, he mentions the description of sites, but no URL. I tried to restore bookmarks in before the upgrade, but I get message "cannot process the backup file. Fortunately, I also store my favorites in MS OneNote, but I don't want want to re-create if I am likely to lose them again. I also installed the Norton toolbar.

  By adopting a belt and Suspenders approach allows first of all make sure you have everything backed up. Have several copies, is the best way to ensure you have the most relevant and the most recent available.

  • manual backups of existing bookmarks and this BEFORE and after any attempt of restoration, know that restorations replace existing bookmmarks
    • See restore bookmarks from a backup or move them to another computer
  • Make a copy of your profile and put somewhere safe, outside the program paths and the firefox profile (Windows desktop is somewhere appropriate) include all subfolders and files (including copies of backup of bookmarks and bookmarks database itself)
    • See back up and restore the information contained in the profiles of Firefox

  I have not personally noticed reported problems specific to the Firefox 10 updates causing problems with bookmarks. Maybe a few extension you have involved, but whatever the cause you could now have corrupted or old installed bookmarks. If it's a - problem, you can restore your bookarks ok, but if a problem persists, you will need to continue the investigation. If you continue to say daily manual backups that you know that the worst cases, is that you lose only part of a days bookmarking.

• Pavilion dv6: Intel Centrino Wireless - n 2230 will not activate after the upgrade to Windows 10

  Model A3E82AV number

  I've been avoiding Windows 10 because I knew something like this was going to happen, but I took the pludge.  Anyway, everything seemed to work but my wireless adapter.  After the upgrade, the rocker on the keyboard turns on and outside airplane mode, and I can't switch to map wireless in Windows settings.
  
  I can get wireless adapter to turn on, go into that in a minute, but if I shutdown or reboot, the problem returns.
  
  I had success in the driver update, or by manually installing the driver, I even read a tip to make the battery, hold the power button down while the battery is out and run it upwards.  I tried to reset the BIOs to default settings.  When the computer feels like it, the wireless adapter will start working after a reboot.  If I have the toggle switch, the light goes from orange to white, I can then activate wireless and connect to my SSID.  If I stop or restart, my wireless NETWORK card no longer works and we return to the toggle keyboard turning power on and off airplane mode.  Device Manager says it is working normally and the drivers are up to date.

  I read a post from microsoft that says VPN adapters could cause corruption while making the upgrade.  I'm a professional, so I got a handful of cards, but also virtual cards VMWare Workstation installed, so I tried to come back to Win 7, remove the adapters, are re-upgrade.  It does not solve the issue.  While I was back in Windows 7, everything worked most of the time, but there were some problems with the programs, etc. which would not work right.  When I upgraded to Windows 10, some of these problems persist, so I checked my backups to make sure they were up to date and did a new install of windows 10.  I am now running a new image with just firefox, associate of HP and the different drivers Intel, I tried to install, and I still can't get the card wireless to tour consistantly on / off power after a reboot.  I thought for sure the nuclear option could solve the problem now I can't even go back to Windows 7.  I did mention to try some recommended drivers Intel, I found in other posts... I also tried to uninstall the driver, and install in compatibility mode, but that has not worked, either.
  
  This one had me scratching my head.  I tried literally everything I can find on the internet in an attempt to solve the problem, and nothing will keep the work of consistantly wireless NETWORK card.  Any other ideas out there?
  
  Looking at the forums, appears not to have a lot of people in all areas of this issue with different brands of computers and network interface cards.  If anyone knows anything else to try, I would really appreciate it.

  FIXED!

  I think so.  I downloaded and installed the bios for Windows 8.  After that, I managed shutdown and booted my laptop 3 times and restarted once.  Every time you start after the installation of the firmware BIOs, the card automatically turned on and connected to my SSID NETWORK.  Since the upgrade to Windows 10 I saw not the laptop automatically start and connect the wireless NETWORK card and he did successfully 4 times now.
  
  The file that I downloaded from the HP Web site was update the BIOs for Windows 8 version F.2D rev A.  The file name is sp68425.  I will continue to monitor and make sure that it was indeed the fix, but all great so far.

  For people who can run on the same topic, here's a recap of what I did to solve my problem:

  Centrino 2230 installed 15.18.0.1 driver
  Update driver Bluetooth 10.0.10586.0

  Updated the BIOS to the version of Windows 8 F.2D Rev A
  
  If you decide to play with the BIOs firmware, just be aware that if things go well, you could cause more damage to your system.  I would only try this method if you are uncomfortable for the recovery of a faulty BIOS installation.

• Hello. I buy the Macbook Air Mid 2015... After the upgrade to El Cap internet speed slowed painfully. What should do? Help, please

  Hello. I buy the Macbook Air Mid 2015... After the upgrade to El Cap internet speed slowed painfully. What should do? Help, please

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• HP Support Assistant broke up shortly after the upgrade to windows 8

  I use a 4 month old desktop HP Pavilion HPE h9-1130 Phoenix, with windows 8 pro (64-bit). There are 2 or more months, I upgraded to windows 7 (64-bit), and I followed the instructions of the windows Upgrade Wizard 8. He said not to uninstall HP support assistant, so I left. After the upgrade, which went through flawlessly, hp support Assistant works perfectly. But a few weeks or months, he ran an update, and update failed to start and the program crashed. Immediately after that, the icon of Wizard support hp in the taskbar has disappeared, as well as the program itself. It will be displayed on the list of programs, but I'm not able to uninstall or do something with it. I can't either start. I tried to get help from HP customer care, but they were a bunch of idiots who just wasted my time. I couldn't even communicate with them, because they were all Indians and speaks very by the English. I tried to ask to speak with a customer support English agent or a Manager, but they would put me on hold and it would never transfer, so I hung up. I think I spoke to 6 different customer support agents a few week spans and via different outlets (live chat, phone, email). One of the "agents of support" has been so incompetent that he spent an hour on the remote just link sitting there, doing repetitive things I told him constantly, I had already tried, like trying to do a base installation of the Web-_-... That said, I was wondering if someone could help me solve the problem, because I would like to have Deputy support back on my computer. But I am doing nothing tedious as a reinstallation of windows or something like that, because it's just ridiculous for a program very little relevant.

  Resolved, by none other than myself. No, thanks to HP customer care, or this forumn. Of a curious, I uninstalled a crap tone of the files and folders that are associated with HP Support Assistant, including HP, frame Support HP, HP Setup, HP Setup Manager support and many other files via Windows Explorer (by searching appropriate tab of the computer), Windows uninstaller and Revo Uninstaller free control panel. Once I felt I had managed to get rid of a bunch of broken files of shit, I tried to install a new HP SA on their site, but it wouldn't work. To fix that, I found that guests "Overwriting" mentioned above has led to the problem, which was "swsetup" and HP SA files have been left and prevented a clean install.  So to fix that, I deleted all pre-existing swsetup and files HP SA from Windows Explorer. After all this, I was able to successfully install SA HP, although I had to download it and then manually start the installation process by clicking on the executable file of the application in the new HP SA folder. Everything seems to work fine now, I ran pretty much all the features of the program and they work fine.  The only thing that seems to be a bit weird is that I updated the original HP Bluetooth driver and rebooted, but it seems not to save the update, as it is still prompting me to do it again.  This isn't a big deal, as an easy solution is just for x on this recommended update and hide.   I will update if something happens, but if I don't update, it means that the product works as it should.  Let's hope I don't have to deal with HP customer support once again, what a terrible experience!

• Volume controls on the keyboard after the upgrade to Windows 8

  I have a Touchsmart 520-1070 with the mouse and keyboard without wire factory.  After the upgrade to WIndows 8, the volume controls no longer work.  I tried the Recovery Manager to reinstall the keyboard drivers, but there is no driver keyboard under hardware drivers.

  In the following device manager are listed under keyboards:

  HID keyboard device

  Keyboard 109 MCIR Microsoft eHome

  Keyboard MCIR Microsoft eHome

  Microsoft eHome key remove control Keayboard

  PS/2 standard keyboard

  Any report that they are installed and are working correctly and that the drivers are up to date.

  Has anyone else seen or solved this problem with a Touchsmart computer?

  The instructions below were provided by HP support.  This has restored the function on the keyboard volume controls.  The referenced below drivers are drivers IDT high definition Audio Device.  I am not sure that it was necessary to reinstall the audio drivers.  It can only had to remove the USB dongle and back to restore the functionality of the button.  Note: the USB dongle is located behind the VESA Panel to the back of the PC.  No tools are required and the dongle can be removed and replaced without shutting down the PC.  VESA panel removal requires a bit of a steady hand, pulling the lip which is close to the connections on the rear panel.

  Instructions received from HP:

  Please go to the following link and check the "return of the system", article #7 is the USB dongle:

  http://support.HP.com/us-en/document/c03026390

  After you have reinstalled the receiver, please download and install the following driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-110499-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

  Then install the following update:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-112060-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• change input key after the upgrade to windows 8

  I use the pavilion dv6-7012tx laptop, recently I've updated the Windows 8 operating system and then upgrade when you press (shift + 2) gives me "while pressing on (shift +') gives @ may I know what is the problem.is there solutions."

  Hello okkarai1991. I understand that you have some problems with your keyboard after the upgrade to Windows 8. More specifically you get incorrect symbols when you use the combination of keys shift +. Is this correct?

  Though according to me, there is a setting in Windows itself, I would like to add that HP has not released drivers for all models of laptops for Windows 8 yet. Most of the models purchased after October 1, 2011 should be supported. This site has more information on HP and the upgrade to Windows 8.

  This looks like a case of Windows using a keyboard that is incorrect. Each language has several layouts depending on the region, it seems that you have one of the other selected. This is a correction which is normally found in Control Panel. The process to access the control panel is a bit different in Windows 8, so I'll give you detailed instructions.

  1. Press the Windows key to take you to the view of the office.
  2. Move your mouse to the upper right corner of the screen and move it to the bottom, this opens the bar of charms.
  3. Select settings in the bar of charms, then select Control Panel. Then select the Language Options.
  4. Click Add an input method, and then select 'QWERTY-US.'
  5. Remove the old method of entry, leaving only QWERTY U.S. and click OK.
  6. Restart the computer and verify that your work of combinations shift + you want.

  I hope it's useful!