OMB script type timestamp data
Hi allI want to recover the precision "seconds" of data type timestamp in a table. Then, I want to get this information into a flat file.
Now, I have this:
Set vPrecision [TABLE OMBRETRIEVE ' / $Project/vTable SourcePath / $$ ' COLUMN '$vColumn' GET PROPERTIES (SECONDS_PRECISION)]
OMBALTER FLAT_FILE '$vFlatFile' CHANGE the VALUES of PROPERTIES (DATATYPE, MASK, SQL_DATATYPE, SQL_PRECISION) RECORD "$vFlatFile' ADD FIELD '$vColumn' ('$FFDateMask', '$vDataType', '$FFDataTypeTS', '$vPrecision')
and I get the following error:
The seconds_precision property does not exist
Hello
Use the name property FRACTIONAL_SECONDS_PRECISION
Kind regards
Oleg
Tags: Business Intelligence
Similar Questions
-
IR of type timestamp data and function group
Are there restrictions on the function group for example based on the data type.
My problem\misunderstanding is in the IR:
USING OF "GROUP BY"
I have a TIMESTAMP (columnname TM_TIME) column and I can schose in the group by clause, but not in the function section. Is there a reason why and I could make it work.
concerning
Thorsten
Published by: Fischert on 02.05.2012 03:05Sorry for my bad English I want to say, it's the data types TIME is not available in the form of columns for functions such as min and max.
the anser on metalink
-------
As you have noticed date, timestamp do not allow to use functions such as min, max, etc... in the interactive report.
Currently, these functions are supported for columns of type number.
The problem has been addressed in the development as a bug:Bug 10247814: AGGREGATE of REPORT INTERACTIVE AND GROUP BY AGGREGATE takes CHARGE ONLY ON NUMBERS
Like many, I can see it is addressed in the next version (apex 4.2). Unfortunately, we do not have a timetable for the next version.
For now, please visit the bug via My Oracle Support.
---- -
Conversion of a data type to the data type Timestamp Date equivalent
I'm trying to use the date of update the son page to track sales phase changes that occur each day associated with a campaign. Reporting requirements are to break the daily accomplishments of the users each day from the previous week. I can't find any other date field which provides information on when a sales stage has changed.
I've searched high and low and ordered Mr. Lairson (sp?) book, but can't wait until I get to solve my problem.
Can someone advise, very explicitly since I was a novice, on exactly how to type such a conversion?I don't know if I understand your query exactly, however if you are looking to convert a timestamp value (i.e. Date of change) in a short date format, then you can use: -
CAST (timestamp AS DATE)
for example CAST (lead. (' "Last modified" DATE)
I hope this helps.
Kind regards
CameronPublished by: Cameron McGrath on March 6, 2009 02:29
-
How can I validate attribute (type timestamp) enter date day is not Sunday.
Hi all
problem is I want to validate the attribute of type timestamp. When the user select a date if the current date is Sunday as the error message
show to the user.
I can do this with the expression of the Groove.You can add a validation script to the EO attribute and use groovy as expression
def d = newValue; println d.day; return d.day != 0;
I have only tested with a date, but it should work with a timestamp too...
Timo
-
The code attached is supposed to focus on a cluster and read the name and the data type of each control of the cluster. When I put a timestamp control in the cluster it returns its data in the form of wave type, I thought timestamp has its own data type. I need to get the type of correct data I use this to a database. I need to be able to tell the difference between a timestamp data type and a waveform, because I do not want to insert a data with waveform data type in the database in the form of stamp and I do not want to insert a time stamp in a place where the waveform data must be. Any ideas?
One of the subVIs is password protected, and it is the one that generates the error.
Using the properties class ID and the name class seems to work OK, producing ID = 60 and the class name = AbsTime for the timestamp and ID = 47 and name = WaveformData for waveform control.
Lynn
-
Hi guys,.
I want to extract information from a column that contains the timestamp data type.
something like that
loged_date between the 09/03/2015 09/03/2015 and 09:00 20:00
and it does not work.
Would be very happy to help.
Hello
SQL lover wrote:
Hi guys,.
I want to extract information from a column that contains the timestamp data type.
something like that
loged_date between the 09/03/2015 09/03/2015 and 09:00 20:00
and it does not work.
Would be very happy to help.
Whenever you have a question, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements) and the exact results you want from this data, so that people who want to help you can recreate the problem and test their ideas.
Explain, using specific examples, how you get these results from these data.
Always say what version of Oracle you are using (for example, 11.2.0.2.0).
See the FAQ forum: Re: 2. How can I ask a question on the forums?
Maybe you want something like:
loged_date between TO_TIMESTAMP (' March 9, 2015 09:00 ")
, ' DD/MM/YYYY HH24:MI:SS.
)
and TO_TIMESTAMP (March 9, 2015 20:00 ')
, ' DD/MM/YYYY HH24:MI:SS.
)
-
Type of data resulting from the difference between two timestamps
Hi, I have a simple question.
I have two TIMESTAMP A and B variables. Now I want to subtract one B - A. What type of data as a result of this subtraction?
Would Shouln t TIMESTAMP again?
Consider this example:
Thanks for help.DECLARE vdat_Begin TIMESTAMP; vdat_End TIMESTAMP; vdat_Difference TIMESTAMP; BEGIN vdat_Difference := vdat_End - vdat_Begin; -- this doesn't work vdat_Difference := TO_TIMESTAMP(vdat_End - vdat_Begin); -- this works END; / PLS-00382: expression is of wrong type
xxsawer wrote:
Hi, I have a simple question.
I have two TIMESTAMP A and B variables. Now I want to subtract one B - A. What type of data as a result of this subtraction?
Would Shouln t TIMESTAMP again?Consider this example:
DECLARE vdat_Begin TIMESTAMP; vdat_End TIMESTAMP; vdat_Difference TIMESTAMP; BEGIN vdat_Difference := vdat_End - vdat_Begin; -- this doesn't work vdat_Difference := TO_TIMESTAMP(vdat_End - vdat_Begin); -- this works END; / PLS-00382: expression is of wrong type
Thanks for help.
No, as stated, there will be an interval.
-
partition interval on the data type TIMESTAMP PrimaryKey
question:
Need example of Oracle Interval partitioning on the TIMESTAMP data type of primary key, including the LOCAL INDEX generated by partitioned interval key functional
Published by: oracletune on April 17, 2013 07:51>
* It seems that interval of time STAMP partitioning is not supported:
>
This is not correct.
>
Partitioning interval is limited to a partition key unique to a numeric or date range.
>
The above is YOUR text and is NOT what the doc.The VLDB and partitioning Guide
http://docs.Oracle.com/CD/E18283_01/server.112/e16541/part_admin001.htm#BAJHFFBE
>
For the partitioning of the interval, the partitioning key can be a single column of the table name, and it must be the number or DATE type.
>
Which must be read carefully. It is said should be "NUMBER or DATE type. Note that 'DATE type' does NOT mean 'Type of DATE data. A TIMESTAMP (but not TIMESTAMP WITH TIMEZONE) are a type of DATE. It's confusing and the doc must could be formulated differently.This code is very well:
drop table test_part_timestamp CREATE TABLE TEST_PART_TIMESTAMP ( PRODUCT_ID NUMBER, DESCRIPTION VARCHAR2(20 BYTE), CREATE_DATE TIMESTAMP(6) ) PARTITION BY RANGE (CREATE_DATE) INTERVAL(NUMTOYMINTERVAL(1, 'MONTH')) ( PARTITION OLD_DATA VALUES LESS THAN (TIMESTAMP' 2013-01-01 00:00:00'), PARTITION P_2013_JAN VALUES LESS THAN (TIMESTAMP' 2013-02-01 00:00:00') )
-
DATE in TIMESTAMP data type conversion
Hello
My question is this:
1. I have a variable of type DATE, which I attribute the value of SYSDATE
2. I want to find * «today» *, truncated to DATEmydatevar DATE:= SYSDATE;
TRUNC function returns the DATE data type. So I get to the point for example 2 *'2010-01-13 00:00:00 ' *.TRUNC (mydatevar, 'DD')
3. I want to assign the value of the point 2, to a variable of type TIMESTAMP
implicitly that will convert the variable DATE to TIMESTAMP.mytimestampvar TIMESTAMP := mydatevar;
Problem: when converting (implicit and explicit conversion with a format mask), I lose hours "00" and "00" minutes and receive something like this: "10 January 13 * 12 *. 00.00.000000000 AM.
Question: How can I convert a DATE to TIMESTAMP keeping the hours and minutes zeros?
Why I need this conversion: I have a table with one "column1" TIMESTAMP column (0) and I take only the rows of the table, where 'column1' is in the range of today 12:00 in the morning until now (what time it is).
Features of the database NLS:
Session settings are the same.PARAMETER VALUE NLS_LANGUAGE AMERICAN NLS_TERRITORY AMERICA NLS_CURRENCY $ NLS_ISO_CURRENCY AMERICA NLS_NUMERIC_CHARACTERS ., NLS_CHARACTERSET AL32UTF8 NLS_CALENDAR GREGORIAN NLS_DATE_FORMAT DD-MON-RR NLS_DATE_LANGUAGE AMERICAN NLS_SORT BINARY NLS_TIME_FORMAT HH.MI.SSXFF AM NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR NLS_DUAL_CURRENCY $ NLS_COMP BINARY NLS_LENGTH_SEMANTICS BYTE NLS_NCHAR_CONV_EXCP FALSE NLS_NCHAR_CHARACTERSET AL16UTF16 NLS_RDBMS_VERSION 10.2.0.4.0
DBTIMEZONE is "+ 02:00".Verdi wrote:
Problem: when converting (implicit and explicit conversion with a format mask), I lose hours "00" and "00" minutes and receive something like this: "10 January 13 * 12 *. 00.00.000000000 AM.I don't think you lose necessarily any information whatsoever. It is probably more a function of your NLS_TIMESTAMP_FORMAT and NLS_DATE_FORMAT. For example, your NLS_DATE_FORMAT could be default setup for a HH24 (24 hours) which would report to midnight as hours of "00". However, it seems that your NLS_TIMESTAMP_FORMAT is configured with "HH" format with a Meridian indicator that means 12 hours time.
Your comparisons should use date/timestamp data types anyway, so as long as the input value is correctly converted to date type that shouldn't matter in any case.
You can see what is actually stored by using the DUMP function:
SQL> SELECT DUMP(TO_TIMESTAMP(TO_CHAR(TRUNC(SYSDATE,'DD'),'MM/DD/YYYY HH:MI:SS AM'))) AS TSTAMP 2 , DUMP(TRUNC(SYSDATE,'DD')) AS DT 3 FROM DUAL 4 / TSTAMP DT --------------------------------------------------------------------------- -------------------------------------------------- Typ=187 Len=20: 218,7,1,13,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0 Typ=13 Len=8: 218,7,1,13,0,0,0,0
As you can see the TSTAMP and DT store almost the same values (218,7,1,13), but the TSTAMP has more precision because of fractions of a second.
HTH!
Published by: Centinul on January 13, 2010 07:23
-
How to truncate a timestamp data type
I can't count the number of requests that I have written over the years where the trunc (date) was a very useful function. However, I can't find a way to accomplish the same thing when dealing with a timestamp data type. According to the 10 g reference SQL, function 'tronque()' is supposed to take care of timestamp types. However, my 10.2.0.4 database always converts the result to type date.
Here's what I'm trying to basically do:
SQL > select count (*)
sys.aud $2
3 where ntimestamp # > sys_extract_utc (trunc (systimestamp))
6 m
where ntimestamp # > sys_extract_utc (trunc (systimestamp))
*
ERROR at line 3:
ORA-30175: invalid type for an argument
I was able to find a way to get a truncated time stamp:
SQL > select cast (trunc (sysdate) timestamp with local time zone)
2 double
3.
CAST (TRUNC(SYSDATE,'DAY') ASTIMESTAMPWITHLOCALTIMEZONE)
---------------------------------------------------------------------------
JULY 27 09 12.00.00.000000 AM
However, this is a powerful approach ugly. Am I missing something? Any help is appreciated!
StanHello
You can do it.
SQL> select 2 cast( 3 trunc(sysdate) 4 as timestamp) 5 from dual 6 / CAST(TRUNC(SYSDATE)ASTIMESTAMP) ----------------------------------------- 27-JUL-09 12.00.00.000000 AM
HTH
SS -
Script Help: VM->; data store Associations
Hello world
Our VM names usually end with a number (WEB1, WEB2, etc.) and our data store names also end in a number. For redundancy of the application, we use warehouses of data whose names ending with numbers for the storage needed by VMs whose names ending in even numbers and data warehouses with names ending with odd numbers for the storage needed by VMs whose names ending with odd numbers. In the physical world, odd numbered data warehouses and the presenters are physically separated from those even.
I tried to create a PowerCLI script to report incompatibilities (people make mistakes) so that I can know if any VM storage on the 'wrong' type of data store (same VM on odd storage or vice versa).
I'm really green with PowerShell and PowerCLI and suspect that there is a way to use the Get - ViewType VirtualMachine view, but have failed so far.
In my environment most VMs use more than one data store, so the script needs to check each store data used by each virtual computer for a mismatch and I want to run the report against my whole environment (a single VC server).
If anyone knows something similar that has already been done or can point me in the right direction, I would really appreciate it.
-Matt
The attached script uses a regular expression to extract the number of the guestname and the datastorename.
Then it uses the modulus of the division by 2 to check if it's a curious (1) or (0) number the same.
When you compare these between the client and the data store, you will find differences.
____________
Blog: LucD notes
Twitter: lucd22
-
Hello everyone!
I used JAXWS to create WSDL from a file of Jehovah's witnesses.
It's my TJ:
-----------------------------------------------------------------------------------
package ws;
Import javax.jws.WebService;
Import javax.jws.WebMethod;
ws import. MyDataType;
*@WebService*
* public class MyWebService {*}
public MyWebService()
*{*
*}*
*@WebMethod*
public MyDataType MyWebMethod (MyDataType mdt)
*{*
* / / mdt.setS ("I got it!"); *
return mdt;
*}*
*}*
-----------------------------------------------------------------------------------
and this is my type of data:
-----------------------------------------------------------------------------------
package ws;
* public class MyDataType {*}
String ^ s;
public MyDataType()
*{*
*}*
* public String getS() {*}
return s;
*}*
* Sets public Sub (String s) {*}
This.s = s;
*}*
*}*
-----------------------------------------------------------------------------------
and that's my Ant build.xml
-----------------------------------------------------------------------------------
* < by default of the project = "all" > *.
* < property name = "weblogic.jar.classpath" value="D:/Projects/bea103/wlserver_10.3/server/lib"/ > * "
* < taskdef name = "jwsc" classname = "weblogic.wsee.tools.anttasks.JwscTask" > *.
* < classpath > *.
* < path id = "weblogic.classpath" > * "
* < pathelement path = "WEBLOGIC_HOME" / >. *
* < fileset dir = "${weblogic.jar.classpath}" > *.
* < include name = "weblogic.jar" / > *.
* < / fileset > *.
* < / path > *.
* < / classpath > *.
* < / taskdef > *.
* < target name = "all" depends = "clean, build-service" / > *.
* < name target 'clean' = > *.
* < delete dir = "output" / > *.
* < / target > *.
* < name target = 'build-service' > *.
* <!-add jwsc and related tasks here - > *.
* < jwsc srcdir = "" destdir = "wsoutput" > * "
* < jws file = "MyWebService.java" type = "JAXWS" / > * "
* < / jwsc > *.
* < / target > *.
* <!-< target name = "deploy" > - > <! - add wldeploy task here - > <!-< / target >-> *.
* < / project > *.
-----------------------------------------------------------------------------------
I have run the Ant task, but I get this error:
-----------------------------------------------------------------------------------
BuildFile: build.xml
clean:
build service:
[jwsc] TJ: processing module /MyWebService
[jwsc] The analysis of source files
[jwsc] The analysis of source files
[jwsc] 1 TJS files processing for the module /MyWebService
* [jwsc] [JAM] WARNING: could not resolve class MyDataType *.
[jwsc] TJ: C:\Documents and Settings\samimi\IdeaProjects\SampleWebService\src\ws\MyWebService.java valid.
[jwsc] Treatment of the web services JAX - WS 1...
* [jwsc] error: couldn't get TypeDeclaration for: MyDataType apt tour: 1 *...
...................
BUILD FAILED
C:\Documents and Settings\samimi\IdeaProjects\SampleWebService\src\ws\build.xml:
19: weblogic.wsee.tools.WsBuildException: JAX - WS web services processing error
-----------------------------------------------------------------------------------
Please help me solve this problem.
Thank you
MojirI tried to compile your source code and received the same exception.
However after compiling the MyDataType.java before running the jwsc task, I was successfully able to build the service.Please try the ant script below and let me know the result:
*
* *
**
*
<>
srcdir = "${source.dir}" "
DESTDIR = "${Build.dir} '"
keepGenerated = 'true '.
classpath = "${Class.Path} '"
Debug = 'true '.
verbose = "false" >
Thank you
Sandeep -
How to periodically send various types of data via the Serial Port?
Hello! Everyone
I have to send data to LabVIEW to my device on the Serial Port.
I know how to send data on serial port in LABVIEW, I already have this part.
Now the problem is that I have several types of data I need to question my embedded device, if I want to send the query periodically command.
So lets say that my four Op Codes are the following, which will send four different types of query command to my device on the serial port.
(To be honest only OP_LED and OP_SENSOR is used now)
0, OP_SYNC
1, OP_LED
2, OP_SENSOR
3, OP_FUTURE
Structure of basic package is as follows:
Header (0x2C), Checksum, length of the data (n bytes), Op_Code (1 byte), length (length of Code + data Op)
For OP_LED, I need to send the package as follows:
0x2c 0x02 0x01 0 x 00 0x2F (0x2F being the XOR checksum) (calculation of Checksum part is done and SUB Vi form)
Length of the package this is 0x02
0x01 is Op Code for OP_LED
In the same way
For OP_SENSORi need to send the package as follows:
0x2c 0x03 0x02 0x00 0 x 00 0x2D (0x2D being the XOR checksum) (calculation of Checksum part is done and SUB Vi form)
0x03 is length of packet here
0x02 is Op Code for OP_SENSOR
So, how can I do this periodically in labview, in such sort that period can be adjusted whenever necessary.
Is there something in LabVIEW to do.
I had done the reception and decoding part and working properly.
So I must implement read and write the part of same while loop?
Do not insert in the table if you put data in an array at index 0. Just use array to build.
No need to have Visa to write don't be a part of wire to the wire of reference and error VISA go in the upper part. These wires should go THROUGH the entry VISA.
Don't your checksum requires all the bytes up through data? Righ now, you only put the checksum on data bytes and forget the opcode and length bytes.
Your sending is not the opcode for Opsync or Opfuture. You just send the empty tables. At the same time for the other two, you put the opcode in the data table. All your original opcode in the table build thread. Get the data out of these structures in case item which is supposed to represent the opcode.
xpress_embedo wrote:
Now it works but I have now two problems.
(1) OP_SYNC and OP_FUTURE do not data, but still receive its data on serial port, can I do something here as I have nothing when the table is empty in the structure of the case.
I do not understand this statement. Perhaps my answer above will fix any issue you have here.
(2) how can selection operation Code to be send is done using control façade but real application, this task should be automated to a certain frequency, like OP_LED package must go out to the serial port to 100msec and packet OP_SENSOR must go out to 1000msec, I do this.
Now you agree a little more architecture. I would encapsulate the code that is in the while loop as a Subvi. Then with the hand of your program while loop, use two time Express VI, a game for 100 msec, the other for 1000 msec. When an express VI is true, run the Subvi with a command set waiting for the answer. When the other VI Express is true, have it run the Subvi with the other set of commands.
The device responds with anything when you send these commands? You only send data. I see no VISA Read to be able to recover all the data.
-
Initializing the elements of the array to different types of data
Hello!
Receiving data sring and write it in the table. Shot data consist of different types of data, so now I have to initialize my element of berries somehow to correct the data type. Table example:
char
char
int
int
float
float
Is it possible somehow? Or should I use the formula node or something like?
Thank you! (new)
These data resembles a cluster to create a cluster, you can create a constant of cluster on the comic book and use the cast function to fill in the cluster. Some things you need to be aware of:
What is the size of the Int?
What is the size of the float?
What is SSE-endian data.
Here are two examples:
Tone
-
How can insert different types of data in the table?
Hello
How can I insert different types of data in the table, (e.g., numeric and string) in the same index of a table.example:
index0 car 10 greencar red 11 index1
Index2 car Blue 12where green car red and blue car as string and 10, 11 and 12 in the numeric form.
then I extracted 10, 11 and 12 a digital tableand, the green car, red car, blue car in a string array
Help!
Use 'Analysis of the chain' as in the picture as an attachment. This will extract the number and color that you can add tables later.
Maybe you are looking for
-
Satellite Pro C650-139 - faulty USB ports
Bought a C650-139 about 3 weeks ago and after 5 days the USB ports started working intermittently and then stopped altogether.Do you have a system restore and even tried to boot with a linux live cd but the machine would not recognize that it is plug
-
Night shift is not present in the iPad 4 after 9.3 updated
Offset of N is not present in my iPad correct me respect
-
HP Deskjet F4180 ceased to print
Original title: My HP Deskjet F4180 stopped printing, why? New ink! My HP Deskjet F4180 printer stopped printing lately. Since last week, he stopped printing for unknown reason. I put new ink cartridge, yet. Plugged and unplugged, checked all the ins
-
PlugThe APU A6 - 365 graphics AMD Radeon HD 2.60 GHz8 GB ram corsairB800M Max Bron Lepa PSUWindows 7 64-bit Ultimate My problem is that the jury is not automatically pass to the Sapphire Nitro R7 4 370 D5 card. All I get is a black screen. I tried to
-
BOOTMGR is missing and 0 windows installation
I have a LG R380 laptop with 3 GB of RAM and 320 disc. I tried to update for Windows 7, however, while it was extracted files on win7 DVD, he says the missing files and it has restarted and this time it said BOOTMGR is missing. When I try to reinstal