on a home network 3 machine sync will synchronize only 2 machines

Similar Questions

• BlackBerry Smartphones help BB Storm will synchronize only one way

  When I enter an appointment in my calendar from device, and then try Outlook 2003 calendar SYC, it will not be synchronized (appointments appear in my Outlook calendar).  If I enter my Outlook calendar appointment it will synchronize the appointments on my device.  I have entered in the configuration of the Fund Manager and assign the two-way synchronization. Still no luck.

  I found the problem.  When you create a new appointment, there is an article that says "send help:" this is a list of all email addresses you receive from emails on your Blackberry.  In some ways, the email address was changed to another.  This has caused the problem of synchronization.  Once I changed it to one that was already there, the two way sync worked.

  I still don't know where you configure what email address it uses.  If someone knows let me know.  Or email to three addresses are emails that I synchronize in Outlook.

• Family calendar sync problems - synchronizes only when we add something

  My wife and I have a calendar shared on our two iphone6s.  IOS is still being updated.  We use a shared family calendar we have put all our appointments, events, etc.  Also, I added my ICloud email in Microsoft outlook if it makes a difference.

  Our problem is that if the person adds an event on their calendar from the Iphone to the family shared calendar, it won't appear on shared calendar to person B THAT IF person B adds an event into the calendar.  To give a specific example, the person adds appointment of eye for May 25, person B does not see the appointment of the eye on the calendar shared only two days later, when person B adds a contractor for June 2.  As soon as person B click 'Add' to the appointment of the contractor, a notification appears as the person added the appointment of eye - even if the person could have done that hours (or days) there.

  In other words, it seems that synchronization on the shared family calendar happens only when you "add" something for the calendar.

  Any ideas on how to fix?

  If this is not the same across the road, with person b adding event and him 'a' notified to get, then I would start by restoring the network settings to the phone of the person 'b '.

• Having a problem using Epson WF-4640 on a home network with the iMac

  Have a new Epson WF-4640 which can be seen on the home network of PCs.  Will work with MacBook Air so plugged on the USB port on the MacBook Air.  Cannot get it to connect wireless or ethernet (via router) of my iMac 10.10.5 running. Have downloaded the latest driver of printer Epson of Apple.  Did the WF - 4640 MF with a port on the router, but still no joy.  Any ideas out there? Thank you.

  If you haven't already done so, try to reset the printing system.

  OS X Mavericks: reset the printing system also of Yosemite

• Sharing files on home network - Vista Home Premium 32 and 64

  Hello people,

  I searched for hours, I made countless different steps to try to understand this point, and yet I'm still far away.
  I have two computers on my home network.
  -Machine 1 is Vista Home Premium 32-bit and is connected via a wired connection to my NetGear router.
  -Machine 2 is Vista Home Premium 64-bit and is connected via a Wireless connection to my NetGear router.
  I have a WD WorldBook connected to the Machine 1 via USB and I would like to be able to access it through my home network on Machine 2.
  Here are my settings that may be useful to know.
  Machine 1:
  -Cable
  -Network: NotURInterwebs (private network)
  -Working Group: DISCOVERY
  -The discovery of the network: WE
  -File sharing: WE
  -Public folder sharing: OFF
  -Printer sharing: OFF
  -Password protected sharing: WE
  -Media Sharing: OFF
  Machine 2:
  -Wireless
  -Network: NotURInterwebs (private network)
  -Working Group: DISCOVERY
  -The discovery of the network: WE

  -File sharing: WE

  -Public folder sharing: OFF

  -Printer sharing: OFF

  -Password protected sharing: WE

  -Media Sharing: OFF
  If I go into start-> network on the Machine 2 I see the other computer and the router, but when I click on the Machine 1 I get the following text:
  Windows cannot access \\Machine#
  Check the spelling of the name. Otherwise, there could be a problem with your network. In an attempt to identify and solve network problems, click on diagnose.
  Error code: 0 x 80070035
  The network path was not found.
  However, when I go to start-> network on computer 1 and click on Machine 2, I have no problem connecting.
  Does anyone have an ideas that could help me understand what is happening?
  Thank you!

  Hello

  Thanks for the detailed information.

  We need additional information to help you with the problem, please answer the following.

  What antivirus application do you use?

  I suggest to change firewall security settings, or disable the security software on the system and try to access the location.

  Method 1:

  Disable the firewall on the Machine 1 and check the status of the issue.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Note: In addition to a firewall, you must also be an antivirus and anti-malware program to help protect your computer. Install Microsoft Security Essentials or another antivirus and anti-malware program and update it. Many of these programs update automatically.

  Method 2:
  Error code 0 x 80070035 indicates that the network path was not found. This problem occurs if the NetBIOS over TCP IP is not enabled in Windows Vista. Please follow the steps below.

  (a) click on «Start», enter "NCPA. CPL"(without the quotes) and press ENTER.

  (b) right click on the connection you use for the local connection, and then click "Properties".

  (c) click on the button continue to check the permission of the administrator.

  (d) click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  (e) click on the button "Advanced" in the opened window. On the "WINS" tab, select 'Enable NetBIOS over TCP/IP' and then click 'OK' to save the setting.

  The following article presents NetBIOS over TCP/IP.

  NetBIOS over TCP/IP

  http://TechNet.Microsoft.com/en-us/library/bb727013.aspx

  I hope this helps.

• With the help of Compaq SR5214X on wireless home network

  I have a Compaq SR5214X desktop PC I want to connect to my home wireless network.  What to I need to buy for this?

  Hello:

  Here is an article from Microsoft which should provide the information you need to set your PC to a wireless home network.  Basically, you will need to purchase a PCI internal or external USB wireless adapter for your desktop PC.

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

  Paul

• Why Firefox Sync does not work on my home network, but at work?

  Firefox Sync on my laptop does not work when my laptop is connected to my home network, but for example if I'm at my desk.

  The internet connection in my house is fine, I can surf the web with this same Firefox on IPv4 and IPv6, DNS etc. also works. Connection to accounts.firefox.com works also, as Firefox for the sync account. Only the synchronization process runs aground. On my desktop at home, I have exactly the same problems. When I open https://sync-209-us-west-2.sync.services.mozilla.com/ in a browser tab, I see a confirmation message that synchronization runs on this server, so apparently the network path between my computer and this server is free.

  After investigation with Wireshark, I see the TLS negotiation successfully, then packages the client was able to respond and after some time, the server closes the connection (encrypted alert). Apparently, no content is transferred between the client and the server. I have attached a screenshot of how Wireshark sees the conversation between the server and the client (sending pictures here did not work so I put on the web: http://ibin.co/1zXABHKdj5mA).

  To exclude a possible configuration problem or bad module, I created a clean Firefox profile and logged into my account in Firefox, but this shows exactly the same problems.

  Fun fact: Firefox on my Android phone will sync on my home network.

  Below, I will link two logs, a successful synchronization (corporate network) and a synchronization failed (home network):
  Sync @ Office: http://pastebin.com/rZmfrbdL
  Sync @ home: http://pastebin.com/a3KUCevJ

  The problem seems to be with your ISP - you can refer to https://bugzilla.mozilla.org/show_bug.cgi?id=1118958 and they may be able to find a workaround by changing your diet or to help you configure a different MTU for the network.

  I hope this helps.

  Mark

• My windows xp home will not install IE8, SP3, updates, backup NT FixIt it or format partition. It is part of a home network.

  The computer has XP Home. It is an older machine, 266 Celeron, 2 GB of Ram that I built a few years ago. It is part of a home network. It has not been updated for a while so I decided to install SP3, updates, IE 8, BackupNT off CD, FixIT and Partition & Format 2 more large players. It wouldn't install them or partition or format the disks again.  It is clear that I have no idea.  Mike

  Hello

  What is your level of service current pack? Click right my computer, click Properties, on the general tab, he says.

  If this isn't SP1A or SP2 you will not be able to install SP3. You will first need to install SP2.

  How you try to install the SP3? Stand-alone package or Windows Update?

  I must say that I'm not sure why you are unable to install, for example, NTBackup. As said by Harish B N, we need more information about the error you get.

  Tricky

• Connection problems XP machine to the rest of the home network

  I have a home network with a Vista machine configuration, a NAS and a XP computer. The Vista PC is able to read and write on the NAS and sees the XP computer. PC XP have internet access but can only see the SIN as uPnP and cannot read or write on the NAS and does not see the Vista machine or WORKING Group also. Both computers have the McAffee protection and 'trust' between them.

  What I've done wrong? Can someone please help?

  Hello

  Regarding SIN, you should check the Server NAS Manuel and software making sure that it is compatible and configured properly with both computers.

  Regarding the Windows share.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  ---------------------

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Is there an equivalent to Firefox Sync method that can be used to synchronize Firefox on three computers connected to the same home network?

  I would like to be able to sync settings between three computers on my home network without having to go on the internet and put everything on a remote server. Computers can already communicate with each other and share, then there should be an easy way to ensure that Firefox data sync would be also.

  Hello

  Please see this.

  Support

  Another way would be to do it manually by using another application, for example. SyncToy, creating the correct pairings between the data on the PC.

  Using SyncToy

  Support

  Firefox stores your personal data in a place known as the Firefox profile folder separate from its installation folder/files. The extensions folder Addons, although some addons may store additional data in the profile of top-level folder, extensions.ini and extensions.sqlite has the info of addons, places.sqlite holds the bookmarks and history, the prefs.js has Preferences, signons3.txt + signons.sqlite files are needed for the passwords and finally sessionstore.js for tabs.

  Files & Firefox profile folder

• Upgraded home network - will this work?

  I'm looking to upgrade my home network devices and have some questions about devices that I did some research and looking to buy.

  WRT 1900 ACS router, switch SE 4008 WRT, of 6500 RE HG AC1200 extender

  If possible I would like the 6500 RE HG as a WAP user, is it possible?  I know there's a 300N WAP browser, but I want to take advantage of the RE 6500 port speeds and speeds of speeds\simultaneous updated wireless band.  My thought is to have the WRT 1900 ACS in a place that will pass to the SE 4008 in another place that feed the RE 6500 Hg in another place like a WAP browser.  I would prefer hard line the RE HG 6500.

  Any help is appreciated!

  Hi, DblDeuce. Linksys RE6500HG will only act as a signal Repeater wireless to your existing Wi - Fi router or Access Point, and it is not a feature must be configured as an access point. However, you can try to look at the LAN-to-LAN or LAN-to-WAN waterfall with the Linksys router on your network configuration of your choice. Check out this link as a guide.

  You can also use a power adapter line for your network configuration. Check out this link.

  Jay-15354

  Linksys technical support

• Machines Vista cannot see the rest of the home network

  I don't know what's happened recently, but here's the thing.

  I have a home network, 1 Vista desktop, 1 Office XP with shared USB attached, 1 drive NAS (running Linux kernel I think). All devices set to the same workgroup 'HOUSE '. Until recently, I could see all the devices in the Vista machine with the selection of 'network' of the Explorer.

  Now I see that me, the wireless router, and if I turn it on, an another Vista laptop. The Vista laptop has the same situation - he sees only the vista desktop and router and anything else3.

  I can connect to the XP computer manually by entering \\computer_name\external_drive_name and even with the NAS drive. I can't see the with the Vista Explorer.

  I can't say exactly when it happened, but is has been in the last month. I see the console of restoration that there is an update Tuesday 4/11, but if I try to restore before this date of restoration fails.

  Discovery network, file sharing, etc., are always turned on. I tried to do a complete reset of the router but nothing helped.

  FYI - Norton of 365 security card option fortunately shows everything on the network, so I know that all devices are in the same workgroup.

  Any advice would be greatly welcome.

  I solved the problem with advice from another forum. I forced the desktop computer to become the master browser by setting 'MaintainServerList' in the registry for the 'yes' rather than 'auto '.

  I can now see all the connected devices.

• Home network works great, remote desktop will not connect.

  I have a Windows 7 laptop and a Vista laptop. They are connected to a secure wireless network. Both work very well as standalones. When I try to connect via Remote Desktop or connect with each other. My 7 is in a homegroup with a single name. My Vista is in a WORKING group with the same name. I can't connect either using remote desktop. Computer for both names are names of a single word, 'XXXXXX', not the format xxx.xxxxx.xxxx and I can't figure another way to their name. I spent 2 days serching various tech forums and tried what they suggested.

  Hello

  Homegroup is a unique feature of Win 7. It uses IPv6.

  As you connect to Vista you must configure Windows 7 to the home network.

  ------------------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  ------------------
  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Home network connection will not be ' don't forget username and password

  I have a small home network two PCs connected via a wireless router - Vista Home Premium connected wireless and Windows 7 Home Premium LAN connected.
  I have no problem with the Windows 7 PC, but the PC Vista doesn't remember the "name of PC-domain\username" and the password (from the Windows 7 PC) despite the box being checked. Once connected there no problem access the required records and the printer.
  I tried to use "map network drive", but, when the Vista PC is started, the network drive was a red x against it and I have to go through the PC/username and password rigmarol.
  The Vista PC belongs to another Member of the family and when she wants to print I have to intervene to make the connections. In my view, that it should be able to be done automatically.

  Hi WeDontByte,

  You can store passwords in Windows that you use to connect to Internet sites or networks. In this way, you don't have to type your password because Windows logs you automatically whenever you return to this place.

  1. open user accounts by clicking the Start button, click Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  2. in the left pane, click manage your network passwords.
  3. click on Add.
  4. in the journal on the box, type the name of the computer on the network or the URL of the Web site that you want to access.
  5. in the user name and password areas, type the user name and password that you use for this computer or a Web site, and then click OK.

  Store passwords for automatic logon
  http://Windows.Microsoft.com/en-us/Windows-Vista/store-passwords-for-automatic-logon

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sudden home networking issues

  Product name: Macbook Pro 13 inch Retina early 2015.

  OS (when the problem started): Yosemite 10.10.5

  OS (now): El Capitan 10.11.5

  The problem

  So yesterday my Mac Wifi connection dropped suddenly. So, I moved to lightning Ethernet connection which has varied between does not and VERY slow, almost unusable. I work from home online, so the last 2 days I was not able to do anything.

  I can connect to Wifi, Mac said Internet: accessible. I can ping. But can not browse and other tools such as Google Drive and Dropbox are unable to connect.

  So far, this would indicate a problem with my network or my router, rather than my right to the machine? However, my Android phone works fine with Wifi.

  Things I've tried:

  I've been on Yosemite 10.10.5. I followed all the troubleshooting steps basis and the following:

  • Reset my SMC.
  • Reset my PRAM.
  • I turned off the Bluetooth.
  • I deleted the files in Network preferences to reset a reboot.
  • I "forgot" my home network to reset it like that.
  • Running reports "wireless diagnosis" everything is "as planned."
  • Attach to the Wireless on my Android Nexus 5 X hotspot. Connects to the Wifi but not Internet after 10 seconds. Sometimes not at all.

  Then, I took a backup and upgrade to El Capitan. The strange thing is, about an hour after the upgrade, my ethernet cable was working fine again! About 14:00 yesterday at 09:00 today when I turned on it to start working.

  NOTE: I connect to the network fine, and Google Drive and Dropbox plugins start synchronization. Full report 'sync', then, after about 10 seconds, they say "unable to connect". Holding "option/alt" and clicking on the Wifi symbol in the toolbar says "Internet: accessible. Indeed, I can 'ping' very well. There is no loss of data packets. So could it be a software on my machine which has suddenly become crazy and prevents connections other than the pings? I have run Avast Anti-virus, but which has worked for months and is running as I type this. Similar posts often get answers their questions about firewalls and proxies that might cause the problem. I only have Avast.

  Affirmations:

  If it was a problem with my router, my phone would not have a problem too?

  If it's a problem with my Mac, why would Internet suddenly started working again after a while?

  I write this in a coffee shop, using their Wifi and it works fine. I don't have whatever it is off on my machine. Yet once, which suggests a problem with my network rather than the phone.

  Is this something that could be fixed to an Apple Store? As I suspected, it works very well to the coffee then probably it would work fine in the Apple store and they don't know what to do.

  I thought only try you geniuses first!

  Thanks in advance.

  It is very difficult to debug an Internet without Internet problem.

  First of all uninstall AVAST from the system. then open system preferences > network > enter your network > what is place please do as automatic. What, the other DNS settings, preferred networks etc please post.