on board camera

Similar Questions

• NAC v4.7.1 - cannot add CASE to CAM - SSL error

  I have a CAM and CAs who was photographed with the newly recreated v4.7.1 image.  On this, I am unable to add the CASE to the CAM.  So far, I've worked with TAC and they can't seem to understand the question either.

  A substance that has been done after the installation:

  -Installed CAM and LICENSES

  -Guarantees self-generated SSL certificate DN of the point to the IP address of the device (if the CAM that point to the IP of the CAM...)

  -Under the confidence of the Board, CAM and CASE lacked the Perfigo entry.  Imported Perfigo of different certification authorities CA entry he already had.

  [email protected] / * /, CN =www.perfigo.com, OU = product, O = "Perfigo, Inc.", L = San Francisco, ST = California, C = US

  -CAM and CASES point to a DNS server that has the entries advance DNS configuration and back to the cam and the CASE

  -Checked CAM can ping by IP and host name ca and the FULL domain name

  -Check that the time on the cams and CASES are synchronized and are OK

  -Verify that the secret password on CAM and CASE by looking at the file /root/.perfigo/secret (also /root/.perfigo/master) and ensuring the matching strings

  Newspapers of throwing what follows:

  Could not connect to 10.1.2.19

  SSLManager: certificate of the server failed to check the string CN = 10.1.2.19, OU = XXX, O = XXX, L = XXX, ST = XX, C = XX:No found secure certificate

  Any ideas?

  Hey,.

  Cisco NAC Appliance version 4.7 (0) no longer contains the "www.perfigo.com" CA in the. Image ISO or upgrade. Directors, requiring the "www.perfigo.com" CA in the network must manually import the CA of a local after installation or updated computer to upgrade to version 4.7 (0).

  In order to establish the secure communication channel initial between a cam and the CASE, you must import the root certificate of each device in the store of trust of the other device so that the CAM can trust the certificate CASE and vice versa.

  http://www.Cisco.com/en/us/docs/security/NAC/appliance/Release_notes/47/47rn.html#wp826817

  Kind regards

  Parminder Sian

• Satellite M300 switched on after using surf the net

  Hello

  I find out that this forum, I hope, can help answer my question.

  My Satellite M300 laptop with ATi graphics card
  Normally I use net surfing with Lan or Wifi turn off properly.
  But after a few seconds the machine automatic lights.

  The service center people have no idea of this problem after motherboard change, wifi, lan Board, camera cable, adapter, ram but still the same problem occur.

  Can someone help me answer? :(Merci.)

  To be honest, your ad is rather confusing, and I don't understand any of your problem.
  Maybe just your English is so bad. ;)

  If I understand you just your laptop wakes up alone. Right?

  In any case try to disable wake up on LAN in the BIOS settings.

• EliteBook 2560p - XB208AV: 2560p another device - unknown driver

  Hello

  I recently bought a laptop computer that has been upgraded from Win 7 to 10.

  I have unknown showing peripheral

  Properties - details - value ACPI\HPQ0004\3 & 33FD14CA & 0

  Could you tell me what it is and how to make it work.

  Also

  The SD card reader does not work

  The Webcam does not appear in all devices. but it seems that, as there is an on-board camera installed.

  Everything else seems to work very well

  Used as a stand-alone computer on the home network wireless

  I searched through many web pages trying to solve, without success.

  If you have any additional info that might help me sort. I would really appreciate it.

  Thank you

  Nemo

  Hi Paul

  This seems to have solved the problem.

  Thank you very much

  Also, I've now sorted the webcam via the BIOS.

  All I have to do now is difficulty the SD card reader.

  Concerning

  Nemo

• Reformatted and cannot activate the product key.

  I recently bought a new hard drive and installed vista on it successfully, updated and, next week, that my Board came out, so I replaced everything. To do this, I had to reformat the hard drive even once, when updates were completed I had trouble getting my video card drivers installed, still not able to do. Went to activate my product key due to be recalled by pop up, trying to activate it says my key is in use already, but I just reformatted my drive.

  You can reactivate your Windows Vista installation by doing the following:

  1. click on the Start button and in the box, type search: slui.exe 4

  2. press the Enter key on your keyboard.

  3 select your country.

  4 follow the instructions for the activation of the telephone (toll-free).

  NOTE: When you call this number, you will first hear an automated voice. If the automated voice gives you an option to talk to a
  Live the Rep of Activation, select this option. If this is not the case, do not enter all the numbers. This should force the automated voice transfer
  an Activation Rep. Live trying to activate through the automated voice won't work, in your case, only through the Live Activation Rep
  your activation will be successful.

  Carey Frisch

• Using an external Flash with Nex-6?

  I try to Flash a S L A V E with NEX-6. I tried different settings and the flash modes. It seems that the manual may be preferable. I'm trying to fill Flash and sometimes I get the results I expect and many times I get a black picture. Apparently the eliminator bad word think S L A V E flash is a bad word. Sigh... Lets call it EXT in the future.

  1/60 or 1/30 f / 11 or f/8

  Sony Nex-6 flash still fires.

  EXT flash - Studio flash on a stand nearby - flash always fires.

  Can someone tell me why the photo would never black?

  So the camera doesn't really manually?

  I hear the 'trigger' turn off.

  The NEX-6 flash always fire.

  The EXT flash is the same topic.

  The pictures are dark or black despite the two flashes firing.

  Here's a specific example. Two pictures on a wall with a dim overhead light candleholder.

  Nex6 manual - 1/60 F 5.6 fill flash on Nex - 6 - no POST Nex-6 takes a reasonable picture.

  Move the nearby POST and aim the EXT on the same premises. Change anything in the camera.

  Now, I get a dark image or black of the camera. The two flashes of fire.

  I used to do the work of studio all this way to set the time with my Nikon D300. No muss no fuss. Using the camera as a light meter. Camera in manual. The value 1/60 or 1/125, F/11. Take a shot or two. Look at the histogram to see if the light was good. And then shoot there all day triggering the EXT of the on-board camera flash, which could actually be set at a low rate. Change the settings of the camera and watch the histogram if you move lights. Otherwise you are good to go.

  But apparently the NEX-6 is too smart. Even in manual mode. How can I make dumb if I can do the same thing? I have 4 blinks for my studio and want to use it. Not to buy some flashes new fantasies more money than the cost of Nex - 6.

  BTW, I like the NEX - 6. Great pictures. Shoots RAW, I need. Love outdoors where it is light. Lovely sharp lens. Large strong viewfinder LCD for outdoor activities. But now I need to use it in my studio with my flashes inside.

  Help please?

  Thank you

  WindyPlayer

  I found that using a Paul C Buff Inc. remote with an ABR800 radio, can trigger other flashes. So, using the nex - 6 claw with a remote control to trigger the flashes more consistent. This way I can use my method to use the settings of the manual camera without the camera to play with exhibitions. Did not understand why you use the built-in flash is not consistent.

  Problem solved I guess.

  -wp

• Driver webcam for camera on-board Pavilion dv6911om

  I reinstalled my original Vista Home Premium 32-bit using the recovery partition. All right, except that I can't make the webcam that is recognizable to the system. Therefore, I can't use my Skype video feature. When I had the factory installed OS, Skype video call worked perfectly.

  I've been everywhere on the Internet trying to find a software YouCam, Quickplay, SP37849, SP46565, SP38361 and SP 45866 - all for nothing is helping. Any software install, except Quickplay (SP38361).

  In the device, under imaging devices Manager, there is no driver webcam in the list, only my HP 6700 all-in-one printer/scanner. Is it possible that only imaging device can be installed at the same time? I really hope this isn't the case.

  Any suggestions will be appreciated. Thank you.

  Hello Futoji,

  First of all, my apologies for not answering yesterday or before. I expect an email to tell me an answer to my question.

  I spent $9 on an external camera and mic, just to have a way to "Skyping". But, I want to still try and set the built-in camera if possible.

  Not being is not a big fan of QuickkPlay, I wonder if I can install YouCam, even if my installation of the factory had QuickPlay? Something that I read during my research led me to think that this substitution can be made.

  Your suggestions have yet to be tried, but I'm going today and inform you of any success. I'm leaning towards the conclusion suggest you, that the camera may have failed.

  Thanks for your help; I'll give you an update.

  Kind regards

  Bill T

• my IBM thinkcentre has recently suffered failure major m/Board, I bought a package of motherboard to fix it, will I have a problem using the xp/pro version that came with the PC when buying originally

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes made to your computer installed new motherboard bundle
  • What you have already tried to solve the problem

  Hello

  No, you can install a new copy of Windows XP Professional on the system. If the key is not displayed as authentic, you can try to activate the phone activation key. Click on the link below.

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Retina pro MacBook 13 inch (early 2015): logic board failure

  I have a macbook pro retina 13inches (early 2015) that I use only for study and check emails. a few weeks ago I noticed that the camera not working. I took the mac for help and they told me it's a question of logic board and I should have a new. It's too expensive, and the warranty just expired. Is this a common problem with MacBook? Feelimg so frustrated! I thought I had purchased quality equipment.

  I have not heard of what is a common problem.

  Questions on the Repair Service for Apple's deposit - a lump sum and a cheaper way to go.

  Genius of booking http://www.apple.com/retail/geniusbar/

• How to replace the logic board MacBook Pro mid-2010

  I have a MacBook Pro 13-inch mid-2010. About once a week, monitors (one who is part of the laptop) and an external will turn grey and freeze. When I turned off the computer, it brings back me to the login screen (I'm under 10.11.5), but I can't move the pointer (whether with my Apple Wireless Mouse or trackpad) to select the icon for my login. After a few reboots, the computer takes care of the password reset function. And there, I can reuse the mouse, select Restart the machine, and I'm back on my way.

  The genius of Apple and I suspect that the problem is with the logic board. Unfortunately, Apple has more parts for MacBook Pro mid-2010. I contacted a few service centers certified Apple the kind told me; None of them can help either.

  Any suggestions for how I have a fix for this problem? Thank you!

  You could contact a specialist to see what their requirement is to send you the

  computer while for a diagnosis appropriate; a specialist is the one who can do all the

  works internally and could actually fix the edge logic that the Mac came with.

  I know some who do this; they charge more than a parts Exchange hosting.

  You can see what a company such as wegenermedia can do. Or see what the

  iFixit guide for Mac (for your specific model) said repair and watch to see who

  part numbers are involved in replacement of the like-kind in refurbished or tested

  OK, from sources such as powerbookmedic.com and other sources used parts.

  The logic board may not be a problem; might be some on the Board of directors or of one which

  attached to, such as the graphics processor. These older models are not

  so difficult for a specialist expert set. While the Mac is able to do so, is a good time

  for they provide labour expertise to swap upgrade replacement parts.

  They can test the feature set and should provide a guarantee for employment.

  Some of these companies repairs also restored the supply of older computers they fixed.

  Good luck & happy computing!

• Deleting photos from my camera memory

  When I was using Photos to store pictures taken with my camera, I tick the box that seems to allow Photos to remove these from the memory card. I don't want the pictures too much room on the card after downloading. How can I delete pictures piling up from the camera memory card?

  Import Photos to Mac Board is marked "Remove items after importing" below the toolbar. If you enable this, prior to import the items, it will be automatically deleted, once the import is complete.

  Or you can use your camera to erase the card after having imported the photos to Photos and verified, if the import was successful.

• Replaced logic board

  December 2015 new display iMac with the retina 5 k, 4 GHz Intel Core i7, 16 GB 1867 MHz DDR3. The problem started when I opened a photo in preview or Photoshop. The screen was decided in 2 different colors and have to restart. I couldn't open a pic in the preview and work in Photoshop.

  During this time, my camera was working fine and I used video Skype without problem. Then in January, I sent the new iMac to an Apple dealer to solve this problem, and they changed the logic board. It took 4 months to be repaired, he I just for 2 weeks now, preview works fine and photoshop as well BUT I realize that the camera to the iMac does not and the microphone internal as well.

  I have 2 questions.

  1 - How the camera and the internal microphone can be fix

  2. when they replaced the logic board, I lost my serial number not available.

  Really need help.

  Where are you from?

  You do not have a real Apple Store to take your iMac to any type of repairs?

  You take your iMac to a new Center Apple authorised dealers/repairers and it took them almost 5 months to repair/replace a logic board in your new iMac?

  If a new iMac, your statements read as if they were NOT in the very competent repair center for me.

  I would have set up an adjustment NOT seen my iMac nine 5 months and fry it with, however, other problems.

  Why, no real Apple don't Store to take your iMac to.

  Is this repair center labeled as an authorized Apple dealer/service center or is it some computer shop electronics/generic, simply stating that they can fix Macs. Doesn't seem to be a very competent repair center, at all! IMO.

  I think you need to, once more, it bring for repair as the repair center has not done something right (AFTER 5 MONTHS!).

  If you have any actual Apple store, you can drive to, I bring in for repair and explain what has happened with this new iMac, so far.

  Better yet, you can call Apple directly at 1-800-MYAPPLE and speak with the service the customer of what happened with your new iMac purchase and see what they can do for you.

  Your iMac should NOT have this kind of questions after a month and still problems after waiting 5 MONTHS for the logic of BIG boxes replaecment after just a MONTH of USE?

  Contact Apple directly, first.

  This iMac should NOT have all these difficulties.

  See if they would replace your iMac and the plug by another new unit model.

  If this does not happen, and they offer to continue to fix, then make sure that very soon that you pay and save extended AppleCare that gives your new iMac two additional years of warranty repair.

  Good luck!

• Distribution-double processor MacPro 4,1 of RAM Board

  Hello world.

  I currently have a tray of uniprocessor MacPro 5.1 with 32 GB of RAM (4 x 8 GB) - 3.46 GHz six core (I replaced the 2.8 GHz processor it initially comes with).

  I recently bought a MacPro 4,1 dual processor tray with 32 GB of RAM (8 x 4 GB) - dual 2.26 GHz quadruple-heart, with whom I intend to replace the tray uniprocessor (after I have updated the firmware of 5.1 and swap on processors with two 3.46 GHz).

  I intend to move my original 32 GB of RAM to the new status bar and use of the 16 GB of RAM of the double set. Is there a better/correct set of distribution of RAM; 24 on a single series and 24 GB on the other (for example a 8 GB, slots slots two 4 GB, slot machines three 8 GB, slots four 4 GB), or is it possible to place the RAM everything?

  I just hope that the RAM on the Board of two processors are 1333 MHz DDR3 ECC, as what I currently have.

  Thanks in advance for any help!

  To install memory see:

  Mac Pro (mid-2012 or earlier version): how to remove or install memory - Apple Support

  The MP 2009 (4.1) came with memory 1066 MHz. up to date firmware than a 5.1 allows you to run the memory at 1333 MHz 1333 MHz memory is installed.

  Sometimes mixture frequently memory causes problems. I think if you install only memory 1066, that it will take place in 1066.

• After you have installed windows 10, I can't use apple wireless key board and mouse magic. any solution

  I am facing a strange situation. I used Win7 on BootCamp. Last week attempted to upgrade to Win10. After the upgrade is perfect, I could not connect to the wifi or wired internet. called the Apple support, Windows supports, no one would help you. Downgraded to Win7, after decommissioning, apple wireless key board and mouse magic does not work. Called Apple support, after nearly 90 minutes of interaction with them, ZERO, no solution result. Apple support told me that an Apple engineer will call me at my appointed time. A call came, but no one answered.

  So, today did a clean install of Win10 through BootCamp. All right, BUT I still can't use apple wireless key board and mouse magic. Can someone help me with this situation? Apple & Microsoft support engineers have failed to help out me. Thanks in advance.

  Have you installed the Boot Camp Windows Support software?

  If you do not see some Mac functionality if you are using Windows on your Mac - Apple Support

• Camera gives a black shadow & drivers Win7 for Satellite A350-13 has

  Hello
  would you help me with my problems?

  1 - my camera sometimes after the launch of gives a shadow black and after a while, it works normally, but generally it works correctly.

  2 - my os is vista and I want to replace it with Windows 7. So, I have not found all the drivers updated toshiba sites. He gave me a message that they don't have what I want. Drivers that I have not found its downloads is:

  Acoustic silencer
  Assist
  Bluetooth monitor
  Bulletin Board
  Assistant bulletin board
  DVD player
  Dolby control center
  Eco utility
  Face recognition
  Firmware update
  Flash cards support utility
  Alert utility Hdd\ssd
  Hardware configuration
  Infrared driver
  Modem region Select utility
  Online product information
  PC health monitor
  PlayReady pc runtime
  Real time
  Remote Control Manager
  Utilities SD
  Service station
  Storage Manager
  Supervisor password utility
  TRS driver
  Tiles for Mobility Center
  Touchpad driver
  WPS library

  Please I want your comments quickly

  Best wishes

  You should try vista drivers as most of them are compatible with Win7. Speaking of camera, you should try to update the software for a chicony