On error - 140

Similar Questions

• Error when trying to install the Sims 3 game to 1.39 update

  Original title: Sims 3 SetupNewsetup.cpp error (140)
   
  When I install the 1.39 update THE SIMS 3, I get:
  > SetupNewsetup.cpp (140)
  PAPP:
  PVENDOR:
  PGUID:
  $
  @ Windows XP Service Pack 3 (2600)
  IE Version: 8.0.6001.18702
  Help me I have windows 7 64 bit

  Hello

  1 did you do changes on the computer before the show?

  2 - is the full version of the Sims 3 game?

  Sorry to hear that.

  Third party or the corruption of the Sims software programs are some of the reasons for which you get the error SetupNewsetup.cpp (140).

  I suggest you to reinstall the software to the clean boot and check if the problem persists.

  Step 1: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  Step 2: Uninstall the software

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 3: Reinstall the software

  If the problem persists, then I suggest allows you to get assistance to the Sims 3 technical support site.

  I hope this helps. If the problem persists, return and I will be happy to help you.

• CFINDEX errors and warnings?

  Where can I find an explanation of the errors returned by cfindex? I'm you try to index Word (some .docx and some .doc) documents and many mistakes 'badkey' on "invalid document ID/key. -(25)' as well as ' KV failed on document filtering: error = 12 ' and 'stream error (-140) - JUMP. I have done some research and find some discussions on problems with PDF files, but nothing useful. It would be nice to know what mistakes.

  I am running CF 9.0.1 version

  Swaraj, thanks for the reply. I took another approach: rather than use a Verity collection, I created a one Solr. I changed nothing else on the code and the indexing process, Solr indexed with happiness all the documents without error.

  One of the reasons I made which are because in the research on the problem I read that Adobe is in decline in future versions of Cold Fusion Verity. I guess that's better than most, but personally, I found Verity to be easier to use for fairly simple search interfaces that I put in place.

  In any case, I think that Adobe should provide the documentation on error codes and others. I think it is quite absurd that the Status attribute on their page CFML Reference for cfindex has 'BADKEYS', described as "a structure of keys with diagnostic on indexing... messages." ', but not their resources or details on these "diagnostic messages.

  Thank you!

  -Michael

• Qosmio F30-140 - error affected

  I turn on my Qosmio F30-140 and he is coming following error message:

  Error affected

  Failed to retrieve the "THotkey.
  Error Code - 0 x 00031402, 0 x 00000002

  After that, it freezes everything simply. What should I do?

  Try to get into the operating system in safe mode and remove the Toshiba hotkey utility system.
  After this try to restart the operating system.

  It work?

• Sims 3 install error SetupNew.setup.cpp (140)

  I tried to install the Sims 3 on my computer and when I click on the automatic disc playback DVD player an error screen appears containing this:

  > SetupNew.setup.cpp (140)
  PAPP:
  PVENDOR:
  PGUID:
  $15.0.0.498
  @ Windows Vista Service Pack 1 (6001)
  IE Version 7.0.6001.18000

  What should I do to fix this?
  Thank you

  Hello Sparstons22

  Thank you for using the Microsoft answers Forum.

  Try first to search through the website of compatibility on the link below to make sure that the game is listed on the site as being fully compatible with Windows Vista.

  Windows Vista compatibility Web site

  http://www.Microsoft.com/Windows/compatibility/

  Second, you can try to install the game in Windows Vista compatibility mode since. This process can be accomplished by right clicking on the Setup file and select the Compatibility tab and select the operating system in the list and the options that you want applied to the installation, then press OK. You can then try the install againa and see what response you get.

  Let us know what you find out and if it works for you suggestions.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• When creating an AD HOC network, I get this error "the network password must be 40 bits or bit 140 according to your network configuration".

  created an ad hoc network on Windows 7 Home premium machine.  When the password was presented by the XP machine at home, the message: "the network password must be 40 bits or bit 140 according to your network configuration.  This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters. Do not know how to proceed.  Advice requested

  MNewsome salvation,

  I suggest that you download and install the latest drivers for the network adapter on the computer to the adapter manufacturer's website and check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also check out the link below and download the document to learn more about the Ad hoc network.

  Special Internet sharing with Microsoft Windows XP

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=13190

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

• Satellite Pro A300D - error during DVD playback

  Hello

  I have a problem with my satellite Pro A300-140 under Vista 32 - bit OS

  Whenever I try to watch a DVD I get an error message "unable to output the video to an external device. Please check the external output setting after the end of the application "-I don't mean to connect what - I want to just watch a movie!

  Ideas - I've read, it's a known issue, but I can not re - find information?

  Thank you

  Hello

  I don't know what the problem with your Dvd Player, try to open with Power Dvd, you can download

  http://www.CyberLink.com/products/PowerDVD/overview_en_US.html

  Just to check if it is software issue
  Welcome them

  Post edited by: Jeka-HE

• Portege R600-140: message says: device would work better with USB 2.0

  R600-140 win 7 prof
  I plug in a device of capture usb video and a popup appears saying (roughly)

  + This device would work better with USB 2.0 - Click here for a list of usb ports.

  I thought all the usb ports 2.
  I just checked the drivers in the Panel, and I thought they are all up to date.

  The laptop supports without a doubt USB 2.0 ports.
  I guess that this message can appear for many reasons: for example the USB device malfunction.
  Also the problem of USB port could be responsible for such error.

  So as the first workaround I recommend you remove the USB hubs and controllers in the Device Manager list.
  Open the Device Manager, look for the controllers and USB hubs and uninstall the driver.
  Reboot the laptop

  Usually the system will begin to recognize USB devices.

  Note: during this procedure, all external USB devices must be disconencted

• Canoe install Recovery on the L775-140 Satellite image

  Hello world

  I have a L775-140 Satellite. I decided to restore my laptop to factory so I ve created 4 CD using preinstalled Toshiba Recovery disk creator tool.

  However, when I put the first CD, after a few minutes, there was an error:

  DiskPart successfully formatted the volume.

  Copy the files from the basics of recovery

  htmprep...

  Boot...

  Error creating file - data error (cyclic redundancy check)

  error: database recovery file copy failed!

  Press a key to continue...

  What should do? Knowing that I have the recovery CD, is there a way to bypass how to install it?
  Could someone help me? In General, I have several problems but I have not found an answer, or find the same situation as me.

  Thank you for your help

  Message was edited: assignment has been translated

  This along with the recovery image installation is pretty simple: either it works or not. Problem may be a mistake on recovery discs or perhaps on the HARD drive.
  Do you use these disks created for the first time now?
  >... y at - it a way around how to install it?
  As much as I know there is not a sort of work around this, you can use to force the recovery image installation.
  Try to start the installation once more.

  The same message occurs again and again?

• Qosmio G30-140 - Console problems on new install XP MCE Raid utility

  I just bought a Toshiba Qosmio G30-140 of second hand. It has 2 hard drives and I tried to install windows 7 with great difficulty due to the raid driver... I managed to cmplete installation and travels account that half the utilities would not work in compatibility mode... Solution, I decided to re install the original Windows XP Media Center Edition, as I didn't have the original disks, I had many days of trial and error downloading different versions to work on my system... FINALLY, I GOT THE RIGHT ONE...

  Here's my question:

  I want to set up my machine to use the 2 drives in RAID mirror in case of data corruption, although I tried to install the RAID utility using the restore disc, I had created before embarking on this mission - suicidal

  IT WILL NOT BE INSTALLED, AND CONTINUES TO GIVE ME THE SAME ERROR OVER AND OVER AGAIN, EVEN IF I AM LOGGED ON ADMINISTRATOR
  error message is "("TOSHIBA RAID Service"Service [kraidsvc] could start. Make sure that sufficient privelages to start the services.) »

  I'm stuck and tried a lot of combinations, different and re-installed the OS twice, I am an administrator and possess these privelages. HELP :((

  Hi mate

  Installing the RAID driver could solve this problem...

  Also, I guess you used the right RAID settings in the BIOS.
  As far as I know, you can change the RAID option in the BIOS on the last page (3-3)
  RAID0 means stripping and RAID1 mirror you want to use.

  After changing the RAID parameters, you must confirm this insert the string 1,2,3,4 and enter.

  But note; After changing this you will need new OS install

• Re: Toshiba Power Saver fatal error. Code 0 x 0

  Hi all

  I recently received this new notebook Tecra M10 (model PTMB0A - 00M 001) replace my laptop to existing business. It came loaded with Windows XP and built by the standard portable computer generation.

  It works fine except that at startup I get the error message "a fatal error has occurred. The program will end. "Code: 0x0.

  I did some research and I think that the original version may have been compromised, because there aren't has no files in the directory C:\Program Toshiba Saver except for a TPSTrace.log that has this message inside: "a fatal error has occurred. The program will end. "Code: 0x0 rental: TPwrSave.cpp (140). The Power Saver software claims to be v7.11.00.

  I downloaded the latest version 7.11.10 (for XP) and when you try to install, the software asks you if it can uninstall the existing version and as it tries, the fatal error code: 0 x 0 occurs which always uninstall, and I suppose that reinstall it. It seems a pity to restore from CD lose all data and other software that is very good because of this software pooey to save energy. Given the original installation was probably standard, there is no guarantee that even if I do a system restore on CD the same problem not re - manifests.

  Is there a way I can do XP think software is deleted (it seems to be absent physically, but XP think it is present) by forcing an uninstall. I can then try to reinstall it to see if I can do better than what it was when it was delivered to me. Otherwise, I'd be more than happy to just work without it, for the trouble it causes.

  Thanks in advance.

  Raymond

  You must delete it from the registry.

  Try CCleaner first, it may be able to remove the bad registry for you keys. (google for "CCleaner")

  Otherwise, run Regedit, and then search for "to sleep". Make sure that you delete, in order to ensure the results refer to Toshiba Power Saver.

  PS. back up the registry first. You can do this by creating a Restore Point in Windows. (Panel of-> system)

• Compatibility of proc error

  I currently have a desktop computer HP P6404y with a Phenom II X 4 820 running Windows 7 64 bit Edition home premium.

  My system was either not boot the operating system when I try and run a game or sit on it too long and have several things open the system will crash. I ran a diagnostic on the system and the hardware/software is says Core 2-3-4 of my proc lost symmetry, which explains why it stops randomly.

  I checked the specifications of the motherboard (M2N78 - THE Violet6) and it has a socket AM3 and is supported by the Phenom II X 4 9XX series processor. I bought a Phenom II X 4 965, which is a compatible AM3 processor, but when I put it in I immediately get an error saying the processor is not compatible. I called AMD and they confirmed that it should work, but there is a certain type of thing with the BIOS that allows to not work and they thought that HP had a fix. I couldn't find something that helps me this online and I have upgraded the BIOS to 5.16, but I did Exchange yet because I don't see anything in the update that said fixed compatibility.

  I called HP and they said apparently they have fertile procs that you can get through them, which makes no sense to me, but if it's true it's true I guess that.

  Is it possible that I can get the proc that I have to work with this computer? Thanks in advance.

  Here are the specifications of your HP Pavilion p6404y desktop computer and its card mother M2N78-(Violet6). According to the specifications, the following processors are supported;

  This motherboard supports only the AM3 processors

  AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)

  AMD Phenom II X 3 Triple-Core (Heka) 7xx/7xxe

  AMD Phenom II X 2 5xx (Callisto)

  AMD Athlon II X 4 6xx/6xxe (undactylopodite)

  AMD Athlon II X 3 4xx/4xxe (Rana)

  AMD Athlon II X 2 2xx/2xxe (Regor)

  At the same time, I think the specs, said a maximum TDP of 95 watts but I could be wrong. In this case the maximum TDP would probably 125 watts. Based on the site Web of AMD, there are only two AMD Phenom II X 4 965 CPU. One is rated at 125 watts and the other is 140 Watts. Both are 'Black Edition' CPU, which means they have an unlocked clock multiplier and are designed to be overclocked. Very little HP computers have options overclocking and yours is not one of them.

  The AMD Phenom II X 4 965 CPU is probably incompatible with your computer p6404y HP because of that;

  (a) it exceeds the maximum. PDT to the motherboard

  and / or

  (b) there is a "Black Edition" CPU

  Please consider buying one of these 95 watt AMD Phenom II X 4 processors compatibility assured.

  Please send Bravo

• Qosmio F30-140: cannot install Windows operating system-> no. HDD

  I bought the Qosmio F30-140 and I can't install Windows XP from my original cd: / recovery cd works fine but it installs a bunch of stuff I didn't need if I want a clean install...

  so when I run my winXP cd Setup program I get the error message: "Setup did not find any hard drives installed in your computer..."

  Although I can run windows normally which is installed from the CD of restoration... I think it's something with the hard disk drivers.

  How can I overcome this? Thanks in advance :)

  Hello Sarunas

  There s nothing wrong! Nothing with HARD drive or other hardware!
  You have just installed the RAID driver
  The Toshiba Recovery CD contains the RAID driver and so you can install it without any problem.
  But the Windows CD contains no such driver and therefore the RAID driver must be installed at the beginning of the configuration of Windows installation procedure.

  Windows will ask you 3 RAID driver. The RAID driver, you can find on the page of the Toshiba driver. Download it on the floppy drive and connect the external USB FDD drive.
  From there, you will be able to install the RAID driver.

  Good luck..

  PS: Search in this forum of similar comments... you will find a large number of discussions on this topic...

• Satellite P200-140: cannot install software on Vista with the administrator account

  Hello

  just bought a new P200-140 Sat with windows vista at home, but I cannot load the software on the computer.

  I'm in administrator mode and when I am trying to load the software I get an error message saying "can only load software as an administrator of disconnection and reconnection as Administrator", but the problem is that I am the administrator.
  can anyone help

  Hello

  Are you sure that the admin account has been activated and you are connected with the admin rights 1005?

  I asked because the administrator in Vista OS account is disabled by default.
  Why? Well, it's an idea to Microsoft ;) and I think that the user must often work with limited rights.
  But if you want to enable this account you can do the following:

  -Right-click on the computer
  -manage
  -users and groups
  -double click on administrator
  -Remove the brand to deactivate account

  After this procedure you can connect to the Vista operating system as an administrator.

  I hope that these tips will help you.

  Good luck

• Ports USB Hi-Speed on Satellite P200-140

  I use a P200-140 and it was announced as having USB 2.0 ports, but whenever I have something to connect to USB ports, the message appears: this device can perform faster if plug you it into a USB Port of speed Hi. This laptop is supposed to have 4 hi speed usb ports, then why can I not connect to them?

  This message appears usually when you connect a high-speed USB device into a port that high speed isn t.
  If you do not want to see this message every time you plug in your device, here is how get rid you of it.

  1. open Device Manager click with the right button on my computer, and select Properties.
  2 from there you click on the Hardware tab, click the Device Manager button.
  3. Expand Universal Serial Bus controllers icon.
  4. Select the properties of any USB universal host controller.
  5. Select the Advanced tab.
  6. check the box which says: "Don't tell me about USB errors."

  However, this message should not appear as the laptop supports the USB 2.0 interface. It s high speed!
  I assume that it is a bug in the windows operating system. Many people in the internet have reported this and it seems that the new installation of Windows from scratch might help.