ONC DAG Exchange 2013

Similar Questions

• Exchange 2013 - DAG (questions)

  Hi all

  I have a scenario where a client has a 2013 DAG Exchange up on two sites.

  Site 1: ECP Server Server CASE (CASE internal only), 1, mailbox Server1

  Site 2: Server 2, Server 2 mailbox store

  For the PCE is on an internal server in the face of security, so it is not accessible outside.

  DB held at Site 1, however if they switch to Site 2 PCE does not work, I guess because there is no local databases when ECP server failure on?

  If I wanted access ECP when failover of the DB at 2 Site I imagine that I would need a second CAS server in Site2 with the same parameters as the PCE as Site 1 box?

  Thank you very much in advance for any advice.

  JAS

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Upgrading Exchange 2013 standard to enterprise

  Hi all

  One of my servers Exchange 2013 (OS 2012) is set to standard, and I like to upgrade to enterprise edition. Standard server is limited me 5 database that can be created when I upgrade the company will lose the database which are mounted? and what is the easiest way to get there?

  Kelly

  Hello

  Please post your question in TechNet forums to help Exchange 2013 to upgrade to the Enterprise edition.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home

• Distribution group Exchange 2013 allow limited external sender does not... Help, please

  Hi all

  We have a problems with restriction of Distribution Microsoft Exchange 2013 group. We had put the delivery management for external sender specific permit under the distribution group, however email outsider (not to allowed list) can still send to the distribution group.

  Please advise

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your Question in Exchange for TechNet Forums.

  https://social.technet.Microsoft.com/forums/Office/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  See you soon

• Problem of outlook MAPI and Exchange 2013 configuration - IMAP

  Hello

  We have installed and configured Exchange 2013 and configured system requirements

  We use the email id unique in several profiles, we can set up, but it will ask for the password again and again

  Exampale: 1) * address email is removed from the privacy * * 2) address email is removed from the privacy * * 3) address email is removed from the privacy * these 3 accounts I have to configure in 3 unique profile (MAPI or IMAP) machine but it is asking password often, so I would like to know that several account several profile is recommended or not? If recommended please if anyone knows resolution please send an email to * address email is removed from the privacy * or * address email is removed from the privacy *

  Kind regards

  Sahana Fernandes.

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your Question in Exchange for TechNet Forums.

  https://social.technet.Microsoft.com/forums/Office/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  See you soon.

• Exchange 2013 RTM upgrade to cu9

  We are almost new with Exchange 2013 and we are running on the RTM version. I understand the list of updates is available already for 2013 Exchange in a form of CU (cumulative updates). If I'm not mistaken it is already in its 9th CU. My question is, is it possible to update our Exchange 2013 GTR cu9 directly without going through the previous CUs? If so, we would be grateful if you could provide us with a quick guide for the upgrade. Thank you very much!

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your Question in Exchange for TechNet Forums.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  Or MSDN Forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Export Exchange 2007 Journal rules and import them into Exchange 2013

  Hello

  I need to export our Journal of exchange rules 2007 and then import them into exchange 2013, this 'http://technet.microsoft.com/en-gb/library/ee633488%28v=exchg.141%29.aspx' page said how it was possible, but I don't have the export-Jou... option in exchange 2007.

  Any help will be greatfull.

  Thank you

  William

  Post in the Forums of Exchange Server:
  http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve

• Bug with Exchange 2013 CU6

  Hello

  I installed Exchange 2013 SP1 and some users take pop account set up in their outlook 2010 client, pop accounts are configured to put new messages in their Inbox to exchange letters. Given that mail upgrade Exchange received pop account cannot be answered or forwarded as it makes its appearance as unsent mail, it's exactly the same problem encountered by several users with office 365:

  http://answers.Microsoft.com/en-us/Office/Forum/office_2013_release-Outlook/Office-365-Outlook-2013-POP3-emails-received/9432c4a9-9df3-43C1-9D1D-bb9f0dac1126

  Today I upgraded to CU6, and the problem is still there...

  Can someone help me?

  You would be best served posting in the TechNet forums rather than the forums of consumer-level (these).

  Or contact Microsoft directly with the issue.

• OWA (Exchange 2013) with ADFS

  Hello

  I tried to connect our OWA (Exchange 2013) to our ADFS server according to this guide - https://eu.netdocuments.com/neWeb2/docCent.aspx?whr=CA-ISRRR0MN

  I got one of the last steps (Activate authentication ADFS OWA and ECP) but I got an error now - when you try to run the command

  Get-EcpVirtualDirectory | Set-EcpVirtualDirectory -AdfsAuthentication $true -BasicAuthentication $false -DigestAuthentication $false -FormsAuthentication $false -LiveIdAuthentication $false -WindowsAuthentication $false
  

  I get an error - a parameter cannot be found that matches parameter name "LiveIdAuthentication".Any thoughts?
  

  Post in the Forums of Exchange Server:
  http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve

• Error Code 80072f8f: windows update fails. Outlook2010 auto config account Exchange 2013 fails 'no available encrypted connection '.

  The user's mobile final has all of a sudden a problem. Windows 7 Pro.

  Disconnects account Exchange 2013 in Outlook2010 cannot connect......

  .. Windows Update fails with error Code 80072f8f... A cert security problem?

  ----

  The user did issue out-of-the-blue (update) about self-configuring. I don't know how he responded.

  So we see that Outlook cannot connect to the Exchange Server... error codes include:

  "There is a problem with the proxy server's security certificate"

  "Outlook cannot connect to the server proxy [rackspace] mex06.emailsrvr.com".

  (Error code 080000000) »

  .. Thus, there seems to be a problem with the security on this computer certificates.

  I have no idea where to start to fix this...

  Rackspace, bravely suggested that I remove the mail profile and create a new...

  The create new e-mail account (exchange 2013) breaks down... same error...

  All hosted no more thoughts.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are getting an error code.

  I suggest you to refer to the Microsoft Help Article below and check if that helps.

  As you've found Windows Update fails with error Code 80072f8f.
  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80072F8F#1TC=Windows-7

  You can also check out the article below.

  https://social.technet.microsoft.com/Forums/office/en-US/0b7ebeab-ca31-4379-a489-16fdad34d550/intermittent-proxy-error-there-is-a-problem-with-the-proxy-servers-security-certificate-outlook?forum=exchangesvrclients

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• ASA VPN client and OWA Exchange/2013

  Hi all... quick question ASA...

  Does anyone know the status of support for OWA Exchange 2013 and the ASA webvpn client access?

  I know that the ASA has a model for 2010... It works with 2013? Is there is the 2013 model in the pipeline for the ASA?

  Thank you!

  Hi Paul,.

  There is an improvement (CSCul27869) that opens to Exchange 2013 be supported with ASA.

  CSCul27869
  It is an enhancement request to add support for OWA 2013 with webvpn.
  https://Tools.Cisco.com/bugsearch/bug/CSCul27869/?reffering_site=dumpcr

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• Advanced POS 5.8.1 Exchange 2013 RegisterAgent error

  Hello

  In our test environment, I installed agent of POS on Exchange 2013 vm without any problems. Then, because he had some problems on the virtual computer exchange, I decided to install another Exchange with /reprise switch and removed the old one. This new exchange server works well with the same characteristics (name, ip etc.) with the former, but now I can not install Agent of POS.

  I already tried ip and domain name during installation if this should not be a problem. It seems that POS retain the former agent of information somewhere, even if it is not installed on the new server...

  Any help appreciated.

  Thank you

  You could try deleting the customer record exist for Exchange in the POS device and then reinstall the agent on the Exchange Server.

  Here are the steps I used:

  Connect to the VDP Advanced device as root

  View customers by entering customer mccli see the--recursive = true

  Delete the registered customer by entering mccli, deletion of the client - area = / clients/VDPApps--name=vmname.companyname.com

• Hyperic 5.8.4 does support Exchange 2013?

  The Hyperic 5.8.4 doc says it supports until 2010, but when I look in the Hyperic 5.8.4 metric models has a model for 2013?

  When I install the 5.8.4 Hyperic agent on a server Exchange 2013, it does not automatically discovered Exchange?

  Any thoughts?

  Thank you

  -Matt

  Hello

  Please take a look at my post - 2013 Exchange support

  In a few words to monitor Exchange 2013 you must:

  1. Run agent hyperic service windows as a domain user.
  2. Domain user; should have all the relevant permissions that I described in my post

  If you have another one please problem run the following command from the hyperic agent directory and attach created debug.log

  java-jar.\bundles\agent-x86-64-win-X.X.X\pdk\lib\hq-PDK-X.X.X.jar Pei Exchange - Dplugins.include = exchange - Dlog m discover debug = > c:\debub.log

  Good luck

• Support of Exchange 2013

  Hello

  I just installed the 5.8.1 Hyperic agent on a server of the mailbox Exchange 2013, but the agent has not captured it is an Exchange Server... Am I missing something?

  TIA

  Hello

  Currently now Hyperic 5.8.1 supports Exchange 2013, our pipeline.

  We will update our site changes its solution with the plugin up to date when it will be released.

  https://solutionexchange.VMware.com/store/products/Microsoft-Exchange-Server-Hyperic

  Thank you

  Yaron

• Installation of POS 6 Exchange 2013 plugin - current user is not a domain administrator

  I installed Exchange SP1 2013 (current patch level).  I'm tying to install the plug-in by vmware-data-protection-administration-guide-60.pdf, Exchange age 169.  VMware VDP Exchange Backup tool for configuring the user start and tells me "the current user is not a domain administrator" (see screenshot).  I am connected to the machine using credentials a domain administrator, not the local computer.  The Exchange sever, Storage group, Mailbox store drop-down lists are empty, apparently a problem of authority.

  The talks on creating a VDPBackupUser account manually KB creating a VMware vSphere backup user account Data Protection (WTP) Exchange plugin with Advanced VDP (2073168).  Before I trot in this way, I thought I'd see if there is anything obvious or that I ran out of base.

  Problem solved.  Setup VMware VDP backup user tool must be "Run as administrator...". "I must have missed that in the doc

  In addition, notes in the log (the configuration tool dialog box) that the created account VMwareVDPBackUser (mailbox) must be connected to (at least once) to complete the configuration.  I use OWA to open a session.

  The VMware install document talks about the user VDPBackupUser.  The user created by this process is VMwareVDPBackupUser.