just installed cloud print on my mobile. works very well with my 5510 but only print black and white.

Similar Questions

• Lexmark X 5650 works very well with Windows 7 Home-64, now, color and size of the pages does not work. The ink is OK. Can't find the solution anywhere! I tried Mr. Fixit... Nothing helps

  Have Windows 7 home - 64. Been using Lexmark X 5650 printer successfully several times. Now only print black and white photos.  Also a part of any page I want to copy will be printed, only in B & W.  Sizes does not correctly... and a lot of ink color & black.  Tried all the suggestion of Mr. Fixit, nothing helps.  Help please!

  Did you upgrade or install something before this product?

  How Lexmark support/help/FAQ to say?

• Very slow internet connection on Win 7 on SSD, but works very well with the OS on the HARD disk and the mode safe on SSD

  Original title: network very slow connection on the current installation of Windows?

  So my situation is that I have two disks (SSD and HDD) who both have a Windows installation.

  Because this SSD is an I got free and is in used condition, I left my copy of Windows 7 intact on my mechanical failure of the SSD drive.

  Now the question is, my internet connection is very, very poor, unless I run in safe mode, or the installation on my mechanical drive.

  I use a wired connection, and our connection at home is limited to 120/10 mbit/s, while I have 5/10 at the most.

  I tried to replace the LAN drivers of my motherboard (MSI FM2-A85XA-G43) using both the driver disc that was bundled with my motherboard, Device Manager and the official site of MSI, I also checked my entire system using Malwarebytes, which detected 7 threats and were abducted, nothing helps.

  I also tried the DNS which did nothing either of hot flashes. Now notice what computer of my brother is also connected and works well.

  Now as I type this, I discovered that my speed has suddenly got stable again out of the blue, but I'm skeptical it will remain, so I still want to ask what is / was going on here.

  Thank you for your time.

  Sorry for the late response here, I've been very busy with the developments in the last days and completely focused on it.

  More than a week has passed since the problem disappeared as if by magic, and so far I don't see the signs of what is going on again.

  I think that the problem has passed away now, but if it arises again I will probably update this.

  Thanks for all the suggestions and your time in this issue.

• HP Deskjet 3050: deskjet 3050 does not print the JPG files in color - all other documents are printed only in black and white

  Dear all,

  I have a problem with my Printer 3050 Deskjet. (USB connected with my laptop).

  My printer does not print documents colors in color, but only in black and white (with the exception of JPGs (photographs) which are printed in color.

  Word or PDF documents (for example) are always printed in black and white - even if they are in color.

  Copy of pages in color on my printer is not a problem.

  This works perfectly well. The printer is connected to my PC via USB.

  Cartridges (color and black and white) are practically new and original HP cartridges.

  Could the problem be associated I could have changed by accident print settings.

  Thanks in advance for your advice.

  Cheticamp

  Hi Cheticamp,

  In controlling panrl → devices and printers.
  Right-click on the printer and select Printing Preferences.
  Cot the Advanced button and make sure that grayscale printing is set as stop and confirm.

  From within Word, click file > print and click settings.
  You will see the screen Lady printing preferences.
  Press Advanced Options and check the optio grayscale is set as off for Word as well.

  Hope that helps,
  Shlomi

• installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online

  NEW HP computer bought in September, already updated to Windows 7 with HP upgrade kit. I installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online. Also can not get a pop window to activate by phone. HP says that I must fully restore Windows Vista x 64 Home Premium AGAIN at the factory all MICROSOFT updates, and THEN... so I can reinstall Windows 7 upgrade. Why now only after 30 days Windows 7 refuses to ACTIVATE! Nothing but run between Microsoft and HP > Please HELP without having to reinstall EVERYTHING on my computer.

  Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click the Windows tab and then click on copy to the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new post in the appropriate Microsoft Genine Advantage forum and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Adobe Premiere Elements doesn't recognize my camcorder - Canon GL-2.  Can I make it work?  The device worked very well with my old computer (just died) and an older version of Premiere Pro. Any suggestions?

  Adobe Premiere Elements doesn't recognize my camcorder - Canon GL-2.  Can I make it work?  The device worked very well with my old computer (just died) and an older version of Premiere Pro. Any suggestions?

  Version 13 capture is more than one camera to tape

  http://helpx.Adobe.com/premiere-elements/KB/removed-features-formats-elements.html

• using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative. * beep *.

  using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative.  * beep *.

  I was able to recreate what you see.   I managed to work around it by installing a different driver that is also supposed to be compatible with the CLJ3600.

  Please consider trying this as a possible solution:

  (1) uninstall the driver CLJ3600 by opening printers and fax machines, driver selection and right-click on it and select Delete.  Once it is removed, right-click on an empty space in the windows printers and faxes and select Server properties.  Click the driver tab, click the CLJ3600 and then click on remove.

  One when you're done, restart, and then install the CLJ3500 driver.  This is a previous version of the driver that has been implemented for the CLJ3600 and is compatible with the CLJ3600.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=315862&prodNameId=315867&swEnvOID=228&swLang=8&mode=2&TaskID=135&swItem=LJ-16838-3

  After installation, try printing again.

  The output I have indicates it will print is more negative.  Please let me know if you have success.

  One caveat about this solution.  The Color LaserJet 3500 doesn't support duplex.  Of workaround only works for two printing on the package of basic or the Color LaserJet 3600 N.

• I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  The Deskjet F4288 joined the printheads on the ink supply.  These are replaced at each change of cartrdige so there is no concern about printing empty color or black cartridges.

  You should be able to print in ink entry mode "backup" by removing color (or black, but not both) cartridges.  There will probably be a warning message about ink backup mode but you should be able to print and the printer will work regardless of the cartridge is available.  In handwritten backup with the only color black cartrdige mode areas will print in shades of gray.  If print ink backup mode only the installed color cartridge then black will be printed by mixing colors.

  See page 75 of the manual here, that says:

  Use the entry ink-backup mode
  Use ink-backup mode to operate the HP all-in-one with only one cartridge. The
  ink-backup mode begins when an ink cartridge is removed from the print cartridge
  transport. During the ink-backup mode, the product can only printing from the computer.
  You cannot start a print job from the control (such as copying or scanning a Panel
  original).

  NOTE: When the HP all-in-one device works in ink-backup mode, a message is
  displayed on the screen. If the message appears and two print cartridges are installed
  in the product, check that the piece of tape plastic protection has been removed
  each print cartridge. When the plastic strip covering the contacts of the print cartridge, the product
  cannot detect the cartridge is installed.

• Download previous versions of Premiere Pro? The most recent one doesn't work on my computer. The screen keeps flashing black and white.

  Download previous versions of Premiere Pro? The most recent one doesn't work on my computer. The screen keeps flashing black and white.

  Hello

  You can see the following link to find out how to download a previous version of creative cloud apps.

  Download and install Adobe Creative Cloud apps

• only of black and white prints

  My sisters new want 5660 printer prints only in black and white.

  I have been all over the net and my iMac to try to understand what is the problem, but nothing helped.

  I looked for the paper type / quality etc settings that were solutions to other problems, but these options are not on my computer.  I passed through all the menus on the printer and many of my programs in an attempt to change a few settings that is saying is not in color, this printer.  I opened the printer settings and the settings of my computer and nothing gave me the possibility to print in color or black and white.

  what the devil?

  the closest solution to you, that I could find was that someone uninstalled and reinstalled the printer and it helped for a while, until she had to repeat the same thing.  that cannot be a workable solution, and my first guess would be that there is a problem with the printer.

  However, if there is something that I am on, can you please let me know?  I'm annoyed at the moment and it's not yet my printer...

  Hello @jammypie,

  The reason why the HP ENVY 5660 e-all-in-one printer is not printing correctly from your Mac OS X 10.6.8 computer is because the printer is not compatible with Mac OS X 10.6.8.

  Because this printer is new, it is only compatible with Mac OS X 10.7, Mac OS X 10.8, Mac OS X 10.9 and 10.10 to Mac OS X. Therefore, there is no driver support on your Mac OS X 10.6.8 computer. I'm surprised that you were able to get the printer to print to your Mac in the first place. But this does not explain why your print quality is so bad. You can try the alternate drivers that appear under the screen (+) add under Print & Fax but I can't guide you to a driver who would be appropriate for your printer, because it is not supported on this operating system. It is an inkjet printer if you can try a few other ink jet pilots who appear in the list.

  The solution to this problem would be to install the desire on a supported operating system and all printing problems will be resolved.

  I wish you good luck going forward with this!

• "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  Hi davidd67669685,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.

  Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat

  If the problem persists ask please check with another user account.

  Kind regards

  Christian

• ATI Mobility Radeon X 1400 with the problem of the TV, only the black and white photo

  Hello

  When I try to connect my TV to my Dell Inspiron 6400 with ATI Mobility Radeon X 1400 card, all I get is a black and white image. I have tride all the PAL settings.

  What I tried: I connected the s-video with an s-video cable output to my TV s-video connector (composite) result: no color image, just black and white of my office.

  I connected the s-video with a s-video SCART cable output to my SCART TV (RGB signal) result: no color image, just black and white of my office.

  I connected the s-video with a s-video SCART cable output to my SCART TV (composite signal) result: no color image, just black and white of my office.

  His is no problem, this workt fine.

  Anyone know how can I get the color on my TV? Is this possible with my s-video cables? What type of signal you send with my Mobility Radeon X 1400 graphics card?

  Kind regards

  Marcel

  
  

• Printing black and white only?

  HP Officejet Pro 8620

  Is there a way to make the printer print black and white only?

  Hi oldstrings,

  You can change the characters to print grayscale (using a black ink only).

  I extracted the advice of setting of printer for windows and mac.

  Alternatively, you can check out the link to reference guide user below.

  http://h10032.www1.HP.com/CTG/manual/c04204791.PDF

  See you soon,.

  Bryan

  

• HP Officejet L7680: Can I print black and white when color cartridge is empty - HP Officejet L7680

  Help, please!

  Can someone tell me if I can continue to print black and white if the color cartridge is empty.  The product name is HP Officejet L7680.

  Thank you

  Hello and welcome to the community of HP @naristot,

  I understand that you would like to know if you can continue printing in black ink, if one of the color toner is empty. I'll be happy to help you.

  This printer was designed to function as a system of four cartridges, so you must have all four available ink cartridges in order to be able to print.

  If this help will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.