EA3500 unstable connection

Similar Questions

• NSA-5600 unstable connections.

  NSA-5600 are unstable connection. All the flap interface and down every 2 minutes.
  I access it through the management port and who has the same problem. How to solve it?
  Is there a version of Firmware OS?

  Firmware OS: 6.2.0.0

  If you have not yet the case, upgrade to the latest version of start of 6.2.2.2

  #Iwork4DELL

• NDAS reports an unstable connection and evetually disconnects.

  My cable (RJ45) connection to the Ximeta NDAS/Iocell unit has been stable for years without any problems what so ever.
  Recently, it has begun to report a "unstable connection" message and eventually disconnects. After review of the Windows Event Viewer, the following was found on 24/12/2014:

  Windows Installer reconfigured the product. Product name: NDAS Software 3.72.2080. Product version: 3.72.2080. Product language: 1033. Manufacturer: XIMETA, Inc. status of success or error of reconfiguration: 1602.

  and

  
  

  Product: NDAS Software 3.72.2080 - Configuration has failed.

  several registered items on:

  \Device\Scsi\ndasscsi1 device (10) began to reconnect. The device may not respond until the reconnection is completed.

  The application \Device\HarddiskVolume9\NETDISK Setup Information\Windows\NDAS 3.72\setup.exe with the process id 4036 has stopped the removal or the ejection of the NDAS\SCSIAdapter_R01\1 unit & 79f5d87 & 4 & 10.

  The application system with the process id 4 stopped removal or eject the device NDAS\SCSIAdapter_R01\1 & 79f5d87 & 4 & 10.

  
  

  I'm really at a loss here is not able to identify the cause of this problem and how to repair. I proceeded to a "restoration" of before the 24/12/2014, and it has not fixed the problem. I can't contact Iocell as it appears that the company no longer exists or it doesn't have a Web site more.
  Please help me if you can.
  Thank you.

  Hello

  I suggest you to ask your question in the TechNet Forums, where we have of the support technicians who are well equipped with the knowledge on the issues of domain.

  Please visit the link.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itpronetworking&filter=AllTypes&sort=lastpostdesc

  Answer please if you have any questions.

• HP Photosmart e-All-in-On 5520: WI - FI suddenly unstable connection

  The WI - FI connection has suddenly become very unstable?

  I tried to uninstall and reinstall.

  It worked like a charm ;-)

  That's what I'm suddenly:

  HP Photosmart 5520 series is currently unavailable. Please check if it is connected and turned on, or try again later.

  It is turned on and connected and I tried again and again

  Hello @NomesNescisand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having connectivity problems. I would like to help!

  I would recommend your computer off.  Once the computer is down, unplug the power cord from the printer and the electrical outlet and remove the power of your router for 60 seconds.

  After 60 seconds, reconnect the router.  Once the router has started broadcasting, reconnect the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I then suggested to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend time of the printer:

  HP Photosmart full feature software and drivers

  After the printer is reinstalled, run the wireless installation.

  I also suggest this document:

  Troubleshooting wireless printing Center

  Good luck and please let me know the results of your troubleshooting operations. If this solves the problem, click on accept the Solution below, as well as others to find the answer. Thanks for posting on the HP Forums!

• Problem connecting, Win 7, WPA - PSK (computer think it's WEP). Managed to substitute, but now very unstable connection.

  Hello, I use Windows 7 to my computer. Here wireless signal is encrypted with WPA - PSK TKIP, but my computer could not register as such (he believes that its WEP). I managed to force it to connect, by manually adjusting for WPA - PSK with TKIP (and the correct password) in the control panel.

  However, the connection is extremely unstable. Often, he simply stops working, although the icon says that there is a link. (Note that this window of available connection has a large red cross next to the signal, because he claims that the settings do not match. He just logs occasionally when I start).

  I wonder if there is a way to solve this annoying problem. I don't know what is causing the computer to see the signal as WEP, when it clearly is WPA - PSK.

  Oh, I found what I think, it is the router in the basement: that said on it: Motorola SBS101E.

  PS: I'm not good on the technical stuff (although I understand basic concepts such as network card drivers, etc., don't ask me not to disable or install a protocol without walking me through the steps).

  Thank you!

  As I wrote, your problem is probably related to the adapter wireless in your office. Maybe it's as simple as that requires an updated driver, but it remains to be seen.

  Result of your ipconfig is quite surprising.  Because you are in a university environment, if we cannot identify a problem with your wireless adapter, you may be able to request assistance from the University of the it Department.  See also comments below on the VPN.

  Here - is more as a matter of interest than anything else - what some of your settings mean:

  Wireless network adapter

  • Your card is a Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC (Realtek RTL8188CE 1 x 1 11 b/g/n Wireless LAN PCI Express Half Mini Card Adapter, which seems to be installed on Lenovo ThinkPads).
  • Your card is automatically assigned (usually by the wireless router, but see below) an IP address of 10.92.129.20.  This address is part of what is called a 'Class A' network, which is generally only used by very large organizations (for example, a University).  This suggests that this wireless network is from University wireless access point rather than a router connected to the modem cable into your basement.

    So it is possible that the antenna on your desktop computer wireless card is not in as good a place as your laptop computer to receive the signal. It's especially if your office uses a built-in wireless adapter, with the antenna at the back of the computer under a desk and near a wall. If you try USB wireless adapter for your desktop computer (or an antenna on an extension cord) move the antenna near a window, if possible.

  • The 'default gateway' for this connection (the address of the wireless router) is 10.92.128.1, which is in the same class A network.
  • The DHCP server (which is what affects your IP address card) is 195.130.132.102.  It is a public IP address belonging to Telenet/Pandora, a Belgian Internet service provider.  In almost all wireless home networks, the DHCP server is part of the router, so your situation is very different.

  Virtual private network (VPN)
  What complicates your Internet connection is the fact that you seem to be using a VPN. This is identified as the 'card Ethernet Hamachi.' I saw many posts complaining that the Hamachi software interferes with various other network connections.  For example:

  After the installation of LogMeIn Hamachi, my continuous wireless network connection disconnected from the internet every few minutes. The wireless connection is ok, but trying to access the internet, I get a message to reset the connection.

  Once I got disabling the network Hamachi (Control Panel-> network) connection and Internet-> network connections, everything is back to normal.

  It happens on two different routers, then the router is probably not the problem.

  This happens with the wired connection.

  I use Windows 7 Home Premium SP 1 64 Bit, Hamachi 2.0.3.89, Intel WiFi Link 5300 AGN.

  LINK

  This is beyond my area of expertise.  If you are unable to determine a driver (or hardware) problem with your adapter wireless and you have installed Hamachi VPN software on your desktop and your laptop, assuming that you really need, you need to get help from the support service of some entity required or recommended use of Hamachi VPN software.

• M40X-295: solved unstable connection WLAN problem

  When you use the WiFi network using the default settings on my m40x (I only put SSID and WPA password for), the connection is established (802.11.g) was often interruppted.
  for example: listening to internet radiostreams, the download has been interruppted or websites is expired.

  Solution 1: Force the m40x-adapter to use 802. 11B only.

  Solution 2: update the driver wlan Intel version 9.0.2.0 (Intel wireless_9.0.2.0_ - _generic_TIC_97904.exe). This driver is located on the Intel site.
  Now the speed of 802.11 g works (almost) well too. OK, the solution 1 is a bit more reliable.

  My configuration:
  M40X-295, WinXP Home
  Router AVM FRITZ! Box Fon WLAN 7050, (802 11 b + g), WPA-TKIP
  DSL 1 Mbit
  WiFi-force about 95%
  (1 m mobile cordless phone)

  Hi Carsten

  Thanks for this useful information.
  I think the 9.0.2 is the new version of WLan.

  Good job.

  Thank you very much

• M40X-250: Unstable connection Wireless 54mbps

  Hello

  A month ago, I bought a new m40x-250 and a brand new US Robotics maxg router, the problem is, I use it wireless and we put him on 54 Mbps, we got the network in the recommended version Robotics which is WPA, so everything seems normal, but the problem is after than many Connect minutes (internet) grave then the back, like ten times in an hour.

  So I thought that it's my phone, so I sent it to Toshiba, complete check-up to the top, they find nothing, the system works perfectly! made me think and I set the router on 11 Mbps, now wifi works great, but my question is Daniel not on 54 Mbps? It should be cos it is as good as standard, on the router and the laptop (802.11 g) now I use 802, 11 b.
  the only thing I can think is my pc card.
  Can someone give me some advice here?

  Thank you!
  Kris.

  Hello

  Try to delete the driver from Toshiba and install latest Intel. You can find it on http://www.intel.com/support/wireless/wlan/sb/cs-010623.htm

  Good bye

• Portege Z30T - A - 10 X unstable connection Wireless

  Hello Forum users!

  I would need a Council to deal with my wireless adapter. It connects OK when the laptop is after the restart, but if I take the it of sleep mode, it has problems to connect to any wireless network. Usually, it connects after 10 minutes to turn off/on repetitive adapter. Sometimes, the adapter also removes the connection to Skype call center. This behavior is independent of the network, including the adapter. What could I do?

  Thank you!
  Jakub

  Hello

  Did you notice a difference if you use laptops with power running or using it on power electric battery?

• EA4500 - unstable connection to my external hard drive from Seagate Freeagent

  Hello

  I would be very grateful if someone can help solve the problem captioned.

  I bought the EA4500 for a week and all is well, except that the connection to my external hard drive 1 TB via the USB port of the EA4500 is not stable.

  The router are visible at the level of the 'network' of Windows 7, as one of the "Computer".   I therefore use my memeo autobackup software to back up my data via a network connection on the external hard drive.

  It works very well, however, for a limited time.  The time is a few hours.

  After that happens, the device can no longer be seen at the level of the "network".  In addition, it cannot be mapped via the service 'road map' normal.  A "Not enough resources" error when I want to map the drive.

  The problem can be solved temporarily after a "roboot" of the router.  But it's frustrating.

  Can someone help me solve this problem?

  Thanks in advance.

  What is the ip address of your router buffalo? 192.168.11.1?

  Check and see if you are double natting.

  Try changing the scope and dhcp IP linksys range identical to the buffalo.

• RDP WAP54G unstable connection

  HIE,

  IM using WAP54G to connect the thin client using the USB wireless. We using RDP connection to connect to our application server. These connection are disconnected most of the time and sometimes its really loud to get IP DHCP from the server. If restart us the AP then it seems that it works very well, but after a few hours it tend to disconnect. Is there any suggestions how to solve this problem? We have thin client from 100 to 200 to16 WAP54G conneting. Distance each WAP54G 3 – 4meters.

  What is your DHCP server... ? Router... ? Modem.. ?

  Do you get the problem with all WAP 16...?

  In what mode you have set up all the WAP...?

  How your network is configured...?

• I have unstable connections when im playing games online

  I used to play games online in this PC and it works fine, until I made a new user and I did know that I have connection problems whenever I logged in this user. (the new user is an administrator)

  Hello Mike,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because of incorrect or damaged Internet connection settings or due to corrupted browser modules.

  I suggest you run the troubleshooter for Internet connections and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, follow the steps in this article and check the issue.
  Reference:
  The problems of games online using Internet Explorer
  https://support.Microsoft.com/en-us/KB/2528246

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• New connection WIFI in Windows 8 is INCREDIBLY unstable. Help, please!

  My machine is a Samsung NP550P7C. I have 4-5 bars of signal when connecting to my wireless router. There are 3-4 laptops in the House who regularly use the same router without ever having an unstable connection, which gives a solid and undeniable performance. However, mine is 'nervous' at best, often late, sometimes completely cut, causing I have to reset the network adapter to retrieve my connection. Essentially, it is unusable.

  I tried various things thanks to scouring the internet:

  -Adjust the settings of the adapter wireless on all the power of the Plans that I use on 'Maximum Performance '.

  -All my network card drivers are up to date.

  -J' tried to disable the network card and allows him once again.

  Nothing works. It of very frustrating and is clearly a problem with Windows 8, because my laptop is brand new and all the drivers etc are up to date.

  I have not tried to uninstall and reinstall Windows, as I literally just received the computer the other day! I have tried unistalling and then re - install the wireless adapter, as it seems very risky to me

  Help, please!

  Hi James,

  I appreciate your efforts to solve the problem.

  This problem may occur if the network card is damaged or due to corrupted network drivers.

  Method 1:
  I suggest you to check if the problem occurs when you use a wired network connection or not.

  Method 2:
  I suggest you to see the steps in the article.

  Wireless and wired network problems:
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Satellite L350D-118 - WiFi connection is not stable

  Instability of satellite L350D - 118 RTL8187b Wireless

  Since the first unstable connection. Closes in 30 minutes, sometimes repair itself.
  My other laptops have a stable connection.
  Each wireless connection is stable, this is not.

  Configurations are substantially the same... my ISP says that there is a problem with the wifi on the laptop itself.

  Windows Vista 32, have reinstalled the drivers several times, same Windows Update did a reinstall.
  Problem remains. Everything looks ok accept the title of the pilot, he says: it's USB 2.0 when it is internal.

  Someone at - it solutions?
  This machine is very good on other aspects, but I'll have to return if this problem cannot be solved...

  Hello

  Maybe you need to download the Realtek page Realtek WLan card driver directly?
  To do this, and check!

  Then I recommend you to check the settings in the Device Manager-> properties-> Advanced tab WLan card.
  Disable energy saving settings and check if you might improve performance by changing some settings.

  Another idea would be the update of the BIOS. Check if a newer version is available on the page of Toshiba Europe.
  If yes-> updated!

  Welcome them

• How to connect the generator of signals of Agilent N9310A chauffeur?

  Hello

  I have a N9310A of Agilent connected via USB to a system using Labview 8.2 and the Agilent driver.  The system goes into remote mode, so there is a communication. I tried to change the example of "Agilent N9310A RF Output" to exit BF (low frequencies) so that I can check the control of the signal using an oscilloscope gererator.  I get the following error: Hex 0xBFFF0015 timeout expired before the operation is complete.

  I must then disconnect and reconnect the USB cable that the example can not find the device.  What happens here?

  I'm new to using Labview with tools

  -Thanks for any help

  -Matt

  Thanks for your help guys. The problem ended up being with the firmware of my Agilent N9310A signal generator. I got the A.02.03 firmware version and an upgrade to the current version (A.02.05) fixed something called an unstable connection between the PC and the N9310A.

  This works.

  -Matt

• Connection Internet on a single machine for the installation of cloud?

  Do I need internet to install the cloud? Where can I download on one computer and transfer it to someone else to install? The computer that I want to install cloud cannot connect to the internet via a stable connection allowing a massive download, so I want to download somewhere else and transfer it via external drive and install it.

  You can download the installation files using the link below and a stable connection.

  You can then install the application of cc desktop on your computer with the unstable connection and sign in to be able to use your files, https://creative.adobe.com/products/creative-cloud

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".