One of my view security server shows as "unknown" in Administrator dashboard view
Hello
One of my view security server (view Horizon 5.2) shows as UNKNOWN in Administrator dashboard view.
I tried with the declared, rebooted Server services restart, still no luck.
The stated server is accessible via RDP and the Services are running.
Can someone help me on this?
This problem has been resolved by disabling Windows NLB NETWORK adapter settings.
We used Windows NLB long back for security servers, recently we removed view Security Server NLB Windows and place in F5 load balancing.
Not sure for some reason, the Windows NETWORK load balancing service came active, disabled, and the problem solved.
Tags: VMware
Similar Questions
-
javaw.exe missing on view Security Server - view 6.2.1
Hello
I'm trying to associate a view Security Server with a connection to the server (point 6.2.1). Both servers run Windows 2012 r2 and ran into a new error (for me anyway).
I have install the matching password, and when I go to install the Security Server component, I get an error of coupling . I can access the server from the server security with https connection and think that other DMZ Firewall rules are configured correctly.
Looking through the papers, I find a mistake on not being javaw.exe is not a recognized command. I drill down to the path of the log entry and find that javaw.exe is not where it seems expected. It seems to be a dynamic path created by the installation process
serverInstUtil : 18/12/15 10:15:11 lancement « « C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\jre\bin\javaw.exe »-Dcom.vmware.vdi.orchestratorj.nativelib=ws_java_nativeNODEP-Djava.net.preferIPv4Stack=true-Djava.library.path="C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\bin » -cp « C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\sslgateway\lib\ * » ; «C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\lib\ * «;» check the 8009 "C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\cache" com.vmware.vdi.tunnelpairing.XmlAjpClientNew 10.97.1.129 ".
serverInstUtil: 18/12/15 10:15:11 Matching of Java SS returned cheque ' ' C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\jre\bin\javaw.exe "' is not recognized as an internal or external command ".
serverInstUtil: 18/12/15 10:15:11 ERROR: an unexpected error occurred while determining if advanced Security Server matching is supported
I used this binary installer to install the server of connection corresponding without problem I've noticed so far. I just downloaded the 6.2.1 installers yesterday (17/12/15) and the files are dated 08/12/15. I have not found any related to the release notes for this version, or in the installation guide.
I can certainly install java runtime and copy the files in place (although I do not know what version).
Any suggestions or ideas?
File this one, by virtue of be sure to double check...
I have disabled UAC, re-directed the installer - the same error.
I saw the event log and has detected an error (event ID 11335) MSIInstaller
Product: VMware Horizon 6 connection Server - Error 1335. The file ' Replic ~ 1.cab ' required for this installation is damaged and cannot be used. This may indicate a network error, an error reading from the CD-ROM, or a problem with this package.
It turns out that it was the MSI. When I have re-uploaded the file, it works beautifully. I had just used this file 10 minutes before. Will show measure twice... really does matter
Save this here for others to avoid my mistake ;-)
-
Unable to connect to view Security Server 5.0
Use vmware view client build horizon 2.1.0 1213173 (ubuntu 12.04 64-bit), when I tried to login (local network), I got timeout message
I can connect if server connection hollow instead of security server connection
one mistake that I find on security server is 33, SideBySide error
no errors not found on the page of the web interface of the login server events
Here is the output of scan nmap from client to server security
from Nmap 5.21 ( http://nmap.org ) 2013-11-06 15:13 MYT
Scan nmap for view.cnc.net.my (10.1.1.20) report
Host is (0.00017 s latency).
Not shown: 988 closed ports
SERVICE OF THE PORT STATE
53/tcp open domain
80/tcp open http
135/tcp open msrpc
139/tcp open netbios-ssn
443/tcp open https
445/tcp open microsoft-ds
3389/tcp open ms-word-serv
49152/tcp open unknown
49153/tcp open unknown
49154/tcp open unknown
49155/tcp open unknown
49167/tcp open unknown
MAC address: 00:50:56:87:35:FF (VMware)
Do not check everything again: you cannot log in because you can't solve. It can be solved, either replace the connection URL in the configuration of the IP address instead of FULL domain name, which I do not recommend since the certificate cannot be based on IP addresses...
When you receive a message "Server (null)", it is because the server name cannot be resolved by the client. The reason why you configure server security <->Server with IP addresses tunnel connection is because they may not be able to resolve the FULL of the other domain name.
The PCoIP gateway feature is enabled on the servers of your connection? It may be useful if you send us pictures of your configuration (security servers and connection)
-> -
VMware View Security Server DMZ
Hello!
We are currently developing a small installation of VMware View in our office as a CEP and I have a question about the server security and the need for the ports against customers.
Our facility:
(Active Directory and RADIUS) 2-factor authentication
Front End FW
Security on the DMZ server
Backend FW
Connection to the server
The question I have is:
4172TCP/UDP port 3389 be open from the Security server to customers?
Is there no way of this tunnel since the Security server through the connection to the server on the inside?
Thank you
Kenth
Hej Kenta.
You are right, there is currently no way to tunnel on the dry-server and the connection broker using PCoIP, you can only create a tunnel through one.
So that means you need to open TCP/UDP 4172 between dry-server and desktop computers-view.
Joel
-
VMware View 5.1.1 Security Server LDAP errors
Im having a serious amount of errors on my VMware View (5.1.1) security server
Log debugging shows a large amount of LDAP errors, see below.
2012-09 - 06T 10: 46:49.075 + 02:00 ERROR (0610-0940) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
2012-09 - 06T 11: 01:50.102 + 02:00 ERROR (0610-0CB8) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
2012-09 - 06T 11: 16:50.109 + 02:00 ERROR (0610-0FE8) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
2012-09 - 06T 11: 31:51.120 + 02:00 ERROR (0610-0DD8) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
2012-09 - 06T 11: 46:51.132 + 02:00 ERROR (0610-0244) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
2012-09 - 06T 12: 01:52.159 + 02:00 ERROR (0610-0F3C) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
2012-09 - 06T 12: 16:52.155 + 02:00 ERROR (0610-0E5C) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
2012-09 - 06T 12: 31:53.182 + 02:00 ERROR (0610-0F68) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
2012-09 - 06T 12: 46:53.194 + 02:00 ERROR (0610-092 C) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
2012-09 - 06T 13: 01:54.217 + 02:00 ERROR (0610-08E4) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
2012-09 - 06T 13: 16:54.227 + 02:00 ERROR (0610-0504) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSEAnyone got any suggestions?
Hello
The plugin ws_admin trying to make field checks every 15 minutes, but given that your security server is not on the field these checks fail. It is completely harmless, but they should not run in first place, I raised this in their own country.
Mike
Edit:
There is a simple solution for this in 5.1.x:
Under the current registry key HKLM\Software\VMware, Inc. \VMware VDM\plugins\wsnm\admin, create a new key named Params, and under that a new DWORD value named InitiateDomainChecks with 0 data. Once set, you will need to restart the VMware View Security Server service for the change to take effect.
-
I'm a little confused on what view "Security Server" is...
I configured a test of internal company environment VMware View 5.1 to access pooled VMs dedicated and linked clone of iPads.
Now, one of the users involved in the test environment wants to access his VM dedicated outside of the office... But I want to be sure to provide a secure connection.
I was a little confused with the VMware documentation, because I understand that VMware View 4 had another product/device to view security server to act as a gateway, secure to operate into DMZ network and enable access to the view connection server... I think so... But I find no such beast in VMware not downloads section called 'VMware View Security Server 5.1.'
I'm in a bit of mess. My understanding on Internet clients see how external access to the server of company internal connection through the DMZ must be leaves much to be desired unless 5.1 view connection server itself has absorbed the activities of the Server VMware View 4 security and he is riding on the area demilitarized or well... Oh hell... I'm just confused
Little help or a point in the right direction would be greatly appreciated!
See you soon!
Keegan
To install the Security server that you use the same installer regarding the Connection Broker, its an option during the installation process.
Linjo
-
PCoIP Raccordementvia security server view Horizon 6.2.1
Given the problem with connecting to the office via a security server view VDI. She starts to connect, is a black screen for about 10 seconds, then disconnects.
This is my setup
All ports are two-way.
Public IP address is NAT for the Security server in the DMZ. I have TCP 80, TCP 443, TCP & UDP 4172 open ports on the Security server. (I tested by telnet to the public IP address on 80, 443, & 4172. It works)
From the Security server in the DMZ, I ports TCP 4001, 8009, 4172, 3389 UDP 4172 open from the Security server to my login server in-house.
From the Security server in the DMZ I have ports TCP 3389, TCP and UDP 4172 open for VDI desktops.
I am able to connect to computers correctly using the server for internal connection on PCoIP. It is only on the Security Server I'm getting the black screen problem.
Any ideas?
I found actually just the problem. I had to activate the secure gateway PCoIP and I had to enter the public IP address and the port 4172. Initially, I activated it and he used internal connection server address it and it did not work so then I changed it to the IP address of the DMZ security server and it still doesn't work. While I was reading upward on the setting that I saw that had to be the accessible public address. Once he did that, he started to work!
-
Horizon view connection and security server matching
Hello friends,
I need some clarification on security and the matching server connection. If I understand well earlier in login server and security versions matching is one-to-one.
Is this same behavior on the Horizon 6 as well? I can read that we can connect several Security Server single instance to connect to the server. But the reverse is possible yet? What are the combinations is achievable or supported?
Documentation centre for Horizon 6 version 6.1
still one by one,
If you need high availability just add another server of connection and pair it with another security server
-
View customer Horizon | Unable to login via the Security Server
Hello people,
We strive to deploy VMware View 5.3. Everything is complete we are able to access desktop of customer view through connection to the server. But when we try to connect to the desktop via security server, authentication of the user position get us the attached error.
Can someone please help me to understand and resolve the error?
Thank you!
Hari.
Thank you for your response. Issues was DNS resolution external URL referred to the client device. We decided. Thank you.
Hari.
-
View heavy client work - but the HTML is not - using security server
However, I better start a new thread after the marathon to get the heavy customer talk via security DMZ server... everything works fine now.
I am now test HTML experience via the same security server... and get quite like I was getting with the thick client. I cross any authentication, it says connection to the office and that's it. Later says that the server has taken too long to respond.
I now have a complete list of the rules of the firewall in any way.
Clearly port 8443 is open from the Internet to the DMZ security server.
I checked the rules and scanned, and apparently they let all ports open between the DMZ and internal both directions in our network... I checked and 22443 is open on the desktop...
Can someone tell me what I should look for the next please?
Thank you
Bill
Make sure you go through all the steps exactly - config http://www.vmware.com/pdf/horizon-view/horizon-view-html-access-document.pdf
-
Hey guys,.
I have a problem with the Security server. I have installed A Windows Server 2008R2 in the DMZ.To install the view security server, the Win2k8R2 must be in the field. This does not work because the server is in the demilitarized zone. How can I get the server to the domain?Without doubt, I need to open ports... But wich ports i open?and is not a security risk to open ports on the DC?Or is there another option?Best regardsBest regardsThere is no requirement for a security to a member of the domain server, these controls was only for the connection to the server or replica server role when you run the Setup program. You will need various open ports for connection server that you are to match, those that are detailed in the documentation under https://www.vmware.com/support/pubs/view_pubs.html
-
Requirements VMware View 5.1 Security Server RAM
Hi all
I understand that the view connection Server 5.1 needed at least 10 GB of RAM for the deployment of desktop 50 + and I also received this tip of the engineer to Support VMware to use at least 10 GB of RAM when installing the CS for the first time, then we later, the performance problem.
Now, my question is how on the Security Server?
Based on the VM docs, they all (CS, transfer, SS) must have the same hardware configuration, but I don't know about the Security Server why would he needs 10 GB of RAM. The CS needs a grand RAM size due to the Virtual Machine Java 2 GB but is SS has a JVM too?
According to your experience, will be a 4 GB enough RAM for SS?
Thanks for the comments!
Server security uses the JVM too.
At least 10 GB is recommended for the connection to the server (including the lines connect to the server and security server). See table 1-1 on page 8 here http://pubs.vmware.com/view-51/topic/com.vmware.ICbase/PDF/view-51-installation.pdf
Mark
-
View security server 404 error - access external Office
Hi all
I am a security view in our gateway server deployment and for purposes of test base, we use a self-signed on view security server certificate.
We are trying to access the external address and the following error.
When you view the web address, we see the following error.
The current set in place is that https traffic (443) intervenes, it strikes at our front door that transfers the SSL and port 80 traffic hits the view Security Server.
I suspect that this could be a sort of issue of the certificate, or a configuration parameter missing.
Any advice would be much appreciated.
Thank you
Gary.
I wish that I could provide more assistance, but I do not have an F5 and yet I found the deployment guide that you have already gone through. The section with the changes necessary for starting servers F5 and safety on page 8. The only thing that caught my attention was that you need to configure the file locked.properties for servers that require http
http://www.F5.com/PDF/deployment-guides/VMware-view5-IAPP-DG.PDF
-
Extra license is required to view security server
Hi, we have a Vmware Academic View4 first bundle only this configuration of a server to view security or additional license coverage there?
Thank you
Robert
No additional license is required to see Security Server. It is included in the General view license.
Mark
-
Peripheral NAT between Security Server and Connection Manager - View 4.6
Hi all
I'm trying to deploy a view environment 4.6 - with a view Security Server in the DMZ.
The DMZ is a NAT entirely would be and isolated network (single firewall, configuration 3-leg-GB-2000 is the model of the firewall).
At this point, just trying to get RDP to work with this configuration.The firewall configuration is as follows:
-Security server IP - 10.1.1.49/24
-The alias created to view connection server - 10.1.1.100 (NAT IP)
-Tunnel NAT (with port 8009 and 4001) created between the server connection view and real IP 10.2.2.229 server connection alias
-The alias created for the view Desktop - 10.1.1.101 (NAT IP)
-Tunnel NAT (with port 3389) created between Desktop and view real IP Destop 10.2.2.239 view alias
I can RDP directly since the Security server to the desktop (via the 'alias' 10.1.1.101 IP) view correctly.
I can connect successfully from the internal network (via IP real office 10.2.2.239).
When I try to connect via the server of security (from the outside) I get the connection for the initial connection manager, and I choose the pool to connect to. However I'm unable to start a desktop session. The error I get is "the office is currently not available.
In the event logs on the Manager server connection that I see that the real IP (10.2.2.239) is used to connect to the desktop view - which will not work in this scenario (the 10.1.1.101 alias should be used).
Has anyone deployed a server of security seen in this scenario?
Thanks in advance!
Not sure if it works or not, but there is a GPO that changes the rules to connect using the DNS name. Is the name DNS returns the correct value, you must connect as?
Maybe you are looking for
-
I missed the SHIFT key and press several buttons in the lower left corner of my keyboard. Firefox has lost the tab that I was using and divided into a separate iteration for each other (plus two I had closed). I could not recover and had to close all
-
Problem with Audio HD Coexant & Windows 7 drivers
Hello. I have problems with the Conexant HD audio drivers in my HP dv633nr laptop. I just installed Windows 7 Pro through the MSDN Academic Alliance, and now Windows is indicating that the driver is not certified digitally. I tried uninstalling and r
-
Suddenly my entire desktop computer went horizontal. I don't know how to rotate 90 degrees. I hope someone can help. My neck pain.
-
Icons of blackBerry Smartphones moving on home screen
Should be a simple question: try to move some icons in the home screen to another screen, apepars message saying "icons cannot be moved. looking to see how to move?
-
ODI-10182: Exception not classified over access to the repository
Hello gurus, I'm new to ODI... Recently, I installed ODI 11.1.1.6.0 on OEL5 and also setup the demo environment.ODI client installed on my windows machine and trying to access the demo environment by giving the following details according to the gett