Unable to connect to view Security Server 5.0

Similar Questions

• Unable to connect to the host via VMWare View Security Server 4

  I have installed and configured the VMWare View connection server and can connect to the virtual machine (Windows XP Pro) shareed via the customer to view without a problem. The problem Im having is that I have configured the Security server in my zone demilitarized and authorized the appropriate DMZ ports and the port 80 and 443 to the outside on my DMZ. Access the public URL and he invites me to authenticate what I do and it then publishes my office pool. I click to connect to the shared pool and it says connection for about 5 drops of s and then just my connection. Now, if I go to my security on my DMZ server, I can connect to the thin desktop via RDP.

  Thank you

  eeg3 is correct if you have a direct connection enabled on the broker for connections paired with security server then you would be forced to open 3389 to the outside world since the workstations would try to connect directly to the desktop.    The right way to go forward is to create the replica with disabled direct connection and combine security with this box server.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Outlook Express: Unable to connect to the mail server! (error 0x800CCC90)

  original title: Outlook Express: unable to connect to the mail server!

  Im trying to get my outlook express to receive and send messages from my live.com account but it comes back with: the server responded with an error. Account: "Live.com', Protocol: POP3, server response:'-ERR AVG POP3 Proxy Server: cannot connect to the mail server!', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC90."

  Someone knows how to fix this? I tried to remove and add the account again using IMAP instead of POP3, but still get an error message, the e-mail address and the password are all correct and I think that ive got the right to Server (live.com?) Im not exactly computer so any help would be greatly appreciated.

  You will find the right settings for an account on this page live.com: send and receive Hotmail from an e-mail application. To change your settings, select Tools > accounts > {account} > properties and make right onto the tabs of servers and Advanced entries.

  [I moved your question on the forum just for Outlook Express issues.] You should not notice a difference].

  Noel

• Error code: 800ccc0e and the message "Unable to connect to the host server", when you set up Windows Mail to receive discussion group messages.

  I recently signed up for Windows Mail, Windows Vista Help. I have configured my Gmail OK account, but when I click TOOLS then Newsgroups I get the following error: unable to connect to the host server. When I click on show details, he said: Microsoft Community Server: msnews.microsoft.com Protocol: NNTP Port: 119 secure (SSL): 0 Code: 800ccc0e

  msnews. Microsoft.com has not existed for about three years now. MS close their news servers. You can still access newsgroups, but you will have to do with one another as eternal September or AIOE news server.
   
   

• Unable to connect to the game server

  whenever I try to play canasta lately I get up error message "Unable to connect to the game server" whas?

  Could be a problem with the security software, try to turn it off and check if that helps and if not contact the game provider

• Windows Media Center - not the initial download put in place data for guide "unable to connect to the remote server.

  Hello

  Looking for help on this one...

  I have a new install of windows 7 pro running, and I was not able to get the guide to download Windows Media Center.   I am up-to-date with all the updates and SP1 version running.   My video card drivers are also updated.

  I use HDHOMERUN PRIME equipment with cablecard and who receives a TV signal very well and I am able to view it in WMC.    I use Verizon FIOS and my zip code is 07452.    Before this computer, I ran the cablecard even with a ceton infinitv and had no problem Guide at all.

  It's just that I can't download the guide data.  Its just totally blank.   I receive the channels and view them, but there is NO data.      Whenever I run the TV setup the same question comes up.  Cannot download the initial configuration data due to the error of previous download.   As far as I know, there is NO error message when Windows installed... actually... I reinstalled windows completely and this has not solved the problem.    I tried to manually download the guide which did not help.   It... nothing happened when I turned 'on' and 'off' WMC in Control Panel to reinstall.  I even tried explore the ehome folder and remove the file db... but nothing is helping.

  I can't find a file mcupdate.exe light on my system - don't know if this is relevant.   When I looked in the event viewer here are some of the error messages that I see.

  Impossible to extract the EpgLineups (error: unable to connect to the remote server)
  Impossible to extract the MCEClientUX (error: unable to connect to the remote server)

  I'm starting to think it's a matter of windows.   Anyone have any ideas?

  Mark

  E-mail address is removed from the privacy *.

  On Tuesday, September 23, 2014 00:32:35 + 0000, Mark_Sap_70 wrote:
   
  > I'm starting to think it's a matter of windows.   Anyone have any ideas?
   
  See this thread
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/is-the-Media-Center-Guide-download-service-down/f0a5ae10-00ea-4635-9177-12074fa7ee81?msgId=87f3f3b5-A485-4c41-8f35-43a4e2a75d7c
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• Uninitialized encryption algorithm (91); Unable to connect to the LDAP server

  Hello

  I configured a new 'provider' in Weblogic to LDAP server. And restarted the management server.

  When I tried to search for LDAP users in the tab "Users and groups", there was no displayed to users. I checked the logs and found the entrance of error below.

  < SNIP >

  Caused by: netscape.ldap.LDAPException: encryption not initialized (91); Unable to connect to the LDAP server

  to weblogic.security.providers.authentication.LDAPAtnDelegate$ AtnLDAPSSLSocketFactory.makeSocket (LDAPAtnDelegate.java:4647)

  at netscape.ldap.LDAPConnSetupMgr.connectServer (unknown Source)

  at netscape.ldap.LDAPConnSetupMgr.openSerial (unknown Source)

  at netscape.ldap.LDAPConnSetupMgr.connect (unknown Source)

  at netscape.ldap.LDAPConnSetupMgr.openConnection (unknown Source)

  at netscape.ldap.LDAPConnThread.connect (unknown Source)

  at netscape.ldap.LDAPConnection.connect (unknown Source)

  at netscape.ldap.LDAPConnection.connect (unknown Source)

  at netscape.ldap.LDAPConnection.connect (unknown Source)

  to weblogic.security.providers.authentication.LDAPAtnDelegate$ LDAPFactory.newInstance (LDAPAtnDelegate.java:4141)

  at weblogic.security.utils.Pool.newInstance(Pool.java:37)

  at weblogic.security.utils.Pool.getInstance(Pool.java:33)

  at weblogic.security.providers.authentication.LDAPAtnDelegate.getConnection(LDAPAtnDelegate.java:3487)

  at weblogic.security.providers.authentication.LDAPAtnDelegate.getConnection(LDAPAtnDelegate.java:3479)

  at weblogic.security.providers.authentication.LDAPAtnDelegate.listUsers(LDAPAtnDelegate.java:2267)

  at weblogic.security.providers.authentication.LDAPAuthenticatorImpl.listUsers(LDAPAuthenticatorImpl.java:178)

  at weblogic.security.providers.authentication.ActiveDirectoryAuthenticatorMBeanImpl.listUsers(ActiveDirectoryAuthenticatorMBeanImpl.java:227)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  < / SNIP >

  Can someone tell me why I get this error.

  Thank you

  Shakeel

  Hello

  Please add - Dweblogic.security.SSL.nojce = true in your startWeblogic.sh script in the section "JAVA_OPTIONS.

  Example: JAVA_OPTIONS = "${JAVA_OPTIONS}-Djavax.net.ssl.trustStore=/u07/oracle/certstore/test_keystore.jks-Dweblogic.security.SSL.nojce=true."

  Please try this.

  Thank you

• javaw.exe missing on view Security Server - view 6.2.1

  Hello

  I'm trying to associate a view Security Server with a connection to the server (point 6.2.1).  Both servers run Windows 2012 r2 and ran into a new error (for me anyway).

  I have install the matching password, and when I go to install the Security Server component, I get an error of coupling .  I can access the server from the server security with https connection and think that other DMZ Firewall rules are configured correctly.

  Looking through the papers, I find a mistake on not being javaw.exe is not a recognized command.  I drill down to the path of the log entry and find that javaw.exe is not where it seems expected.  It seems to be a dynamic path created by the installation process

  serverInstUtil : 18/12/15 10:15:11 lancement « « C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\jre\bin\javaw.exe »-Dcom.vmware.vdi.orchestratorj.nativelib=ws_java_nativeNODEP-Djava.net.preferIPv4Stack=true-Djava.library.path="C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\bin » -cp « C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\sslgateway\lib\ * » ; «C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\lib\ * «;» check the 8009 "C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\cache" com.vmware.vdi.tunnelpairing.XmlAjpClientNew 10.97.1.129 ".

  serverInstUtil: 18/12/15 10:15:11 Matching of Java SS returned cheque ' ' C:\Users\ADMINA~1\AppData\Local\Temp\{E9740BB3-641F-492D-8B76-802FA34C778F}~setup\unpack\program files\VMware View\Server\jre\bin\javaw.exe "' is not recognized as an internal or external command ".

  serverInstUtil: 18/12/15 10:15:11 ERROR: an unexpected error occurred while determining if advanced Security Server matching is supported

  I used this binary installer to install the server of connection corresponding without problem I've noticed so far.  I just downloaded the 6.2.1 installers yesterday (17/12/15) and the files are dated 08/12/15.   I have not found any related to the release notes for this version, or in the installation guide.

  I can certainly install java runtime and copy the files in place (although I do not know what version).

  Any suggestions or ideas?

  File this one, by virtue of be sure to double check...

  I have disabled UAC, re-directed the installer - the same error.

  I saw the event log and has detected an error (event ID 11335) MSIInstaller

  Product: VMware Horizon 6 connection Server - Error 1335. The file ' Replic ~ 1.cab ' required for this installation is damaged and cannot be used. This may indicate a network error, an error reading from the CD-ROM, or a problem with this package.

  It turns out that it was the MSI. When I have re-uploaded the file, it works beautifully.   I had just used this file 10 minutes before.  Will show measure twice... really does matter

  Save this here for others to avoid my mistake ;-)

• Not able to connect with the Security Server

  Hello

  IM setting up a demo with view 6 environment, and when I try to connect locally on the servers of connection it works fine, but when I try to connect to the Security server fails with the image below.

  

  The Security server has 2 network cards, now in the DMZ and in production. I guess I should also be able to connect directly to the ip production, but the same error.

  We have disabled the firewall between dmz and prod for troubleshooting, but same problem.

  The image below is the Security Server, the addresses here are the ip 'internet', I guess it's true?

  

  The image below is the connection to server 1, the addresses here are internal, and is the FULL domain name, if it was "internet ip" instead?

  

  If I try on the spot to connect to the ip address of prod on security with internet server explorer, im able to connect, but when I select the office that it will fail "cannot display this page", then shows the 'internet' ip in the address field.

  I guess there is just something simple I've missed... hope you understand my question

  Thanks for the support.

  If you do not already have a look at this description of the display configuration, it covers remote access via security servers as well. Setting up remote access with a view PCoIP 4.6 and newer https://communities.VMware.com/docs/doc-14974

  I guess the fact that you can connect through the servers of connection that the URL you configured in the view administrator for servers in connection is a production local IP address/address?

  External security URL server is also an IP/address of DMZ / external can be solved?

• Problem with USB auto connect with clients that connect through the Security server...

  Lack of VMware View 5.0.1 with 2 servers connection and a security server. When the clients connect directly to the server connection, USB connection works very well... users can use their USB drives and other devices with their VM. The problem occurs when they attempt to use their USB devices when negotiated through the Security server.

  I know that port 32111 (TCP) must be open between the server security and the connection to the server, but even after doing so it does not always work... customers just to get the scrolling message of office in the USB menu initialization.

  Our current facility is:

  External IP address-> DMZ (Security Server)-> connect to server

  Entrust us our firewall config through our ISP (we are not overloaded with scientists here, it's just me, so things like little help my work load). They are certainly not incompetent (or at least were not in the past). I had to open the external 32111 IP port to the DMZ, then of the DMZ to our connection server that is used for external connections. Everything about VMware View works perfectly for the clients that connect this way, but not USB devices.

  One thing I give is if our having a configuration of VLAN dedicated for customers views influence what either. I'm trying to keep an eye on what ports are open that for our firewall for my records, but I do not see where I openly opened ports on the internal side of security server to our internal network. He must have the port opened directly from the internal face of security server of vmware 32111 discovers clients?

  The firewall Guys tell me that they checked over and over that port 32111 is open throughout the. They also said that they tried to telnet 32111 to our security server port and have nothing back (should have gotten garbage at least according to them).

  An idea of the next steps to take? It is obviously a blocked port, I just have no idea why at this stage.

  I know that port 32111 (TCP) must be open between the server security and the connection to the server, but even after doing it still does not work

  This is not what it takes. The agent is listening on the port 32111, you must open the firewall to allow connections to the Security server for the desktop on port 32111 (same thing you must allow RDP and PCoIP).

  Mike

• I'm a little confused on what view "Security Server" is...

  I configured a test of internal company environment VMware View 5.1 to access pooled VMs dedicated and linked clone of iPads.

  Now, one of the users involved in the test environment wants to access his VM dedicated outside of the office... But I want to be sure to provide a secure connection.

  I was a little confused with the VMware documentation, because I understand that VMware View 4 had another product/device to view security server to act as a gateway, secure to operate into DMZ network and enable access to the view connection server... I think so... But I find no such beast in VMware not downloads section called 'VMware View Security Server 5.1.'

  I'm in a bit of mess. My understanding on Internet clients see how external access to the server of company internal connection through the DMZ must be leaves much to be desired unless 5.1 view connection server itself has absorbed the activities of the Server VMware View 4 security and he is riding on the area demilitarized or well... Oh hell... I'm just confused

  Little help or a point in the right direction would be greatly appreciated!

  See you soon!

  Keegan

  To install the Security server that you use the same installer regarding the Connection Broker, its an option during the installation process.

  Linjo

• FRM-41213 unable to connect to the report server

  Dear all, I use Forms10g and reports 10g.
  I call my form report, show this error:
  
  FRM-41213 unable to connect to the report server
  
  It's my code. What's not here?
  
  
  DECLARE
  Repid REPORT_OBJECT;
  v_rep VARCHAR2 (100);
  rep_status VARCHAR2 (20);
  plid ParamList;
  number of vParamValue;
  BEGIN
  plid: = Get_parameter_List ('tmp');
  IF this is Id_Null (plid) THEN
  Destroy_parameter_List (plid);
  END IF;
  plid: = Create_parameter_List ('tmp');
  Add_Parameter (PLid, 'P_Block', Text_Parameter,: block_query.item_block);
  Add_Parameter (PLid, 'P_Category', Text_Parameter,: block_query.item_category);
  Add_Parameter (PLid, 'P_Dept', Text_Parameter,: block_query.item_dept);
  Add_Parameter (PLid, 'P_FLOOR', Text_Parameter,: block_query.item_floor);
  Add_Parameter (PLid, 'P_IP', Text_Parameter,: block_query.item_ip);
  Add_Parameter (PLid, 'P_Room', Text_Parameter,: block_query.item_room);
  Add_Parameter (PLid, 'P_Userid', Text_Parameter,: block_query.item_usr_id);
  Add_Parameter (PLid, 'PARAMFORM', Text_Parameter, "NO");
  
  Rep: = FIND_REPORT_OBJECT ('rp_test1');
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_COMM_MODE, SYNCHRONOUS);
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESTYPE, cache);
  
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESFORMAT, 'PDF');
  
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_OTHER, "paramform = no");
  
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_SERVER, 'rep_oracleapps_eHOpeAS');
  
  v_rep: = RUN_REPORT_OBJECT (repid, plid);
  rep_status: = REPORT_OBJECT_STATUS (v_rep);
  
  While rep_status in ('MARKET', 'OPENING_REPORT', 'PENDING')
  LOOP
  rep_status: = report_object_status (v_rep);
  END LOOP;
  WEB. SHOW_DOCUMENT ('/ reports/rwservlet/getjobid ': substr (v_rep, InStr(v_rep,'_',-1) + 1) |'?)
  ('| 'server = rep_oracleapps_eHOpeAS');
  Exception
  While others then
  message(SQLERRM||) e -'|| SQLCODE);
  
  End;

  Hello

  Please start you are first report server and then try to view report.try something like this to start the report server.

  rwserver server=server_name start
  

  Note:-you need to start the report server using cmd (Dos) Pormpt.soemthing like this.

  c:\form_home\bin\rwserver server=server_name start
  

  Sarah

• HP Envy Notebook dv6: unable to connect to the proxy server

  I saw an error message "Unable to connect to the proxy server" when I try to connect to the internet via WIFI, even if the label shows who is connected to my home router.

  HR63 wrote:
  

  Thanks for the tip, there is so much information, the laptop with this problem belongs to my daughter and because she doesn't have an internet connection (can not download anything), there is another way to fix it?

  I don't know because the online is where most of the instructions are locate in. I copy and paste the links here, but unless you can print them out or print the online pages it becomes hard, but here are the parts of the txt of it. +

  http://malwaretips.com/blogs/unable-to-connect-to-the-proxy-server-removal/

  How to remove "Unable to connect to the proxy server" (Virus Removal Guide)

  This page is a comprehensive guide, which will remove "Unable to connect to the proxy server" virus from your computer and any other adware program that may have been installed during the installation process.
  Please complete all of the steps in the correct order. If you have any questions or doubts in any point, STOP and ask for our assistance.
  STEP 1: restore the default proxy to your machine settings
  STEP 2: remove failed to connect to the ad software proxy server from Internet Explorer, Firefox and Google Chrome with AdwCleaner
  STEP 3: delete impossible to connect to the proxy server with Junkware Removal Tool browser hijacker
  STEP 4: delete impossible to connect to the virus pop up server proxy with Malwarebytes Anti-Malware free
  STEP 5: check a second time for the "unable to connect to the proxy server" malware with HitmanPro
  (Optional) STEP 6: delete impossible to connect to the proxy server of Internet Explorer, Firefox and Google Chrome ads

  http://www.geckoandfly.com/9275/Internet-connection-error-unable-to-connect-to-the-proxy-server/

  It is with IE

  Step 1 - launch Internet Explorer

  Step 2 - Click the icon "but" it looks like a gear wheel...

  Step 3 - select 'Internet Options '.

  Step 4 - Select the 'connection '.

  Step 5 - Click Lan settings

  Step 6 - uncheck "use a proxy server for your LAN (these settings may not apply to dial-up or VPN connections)."

  Step 7 - click 'Ok' to save the changes

  If you are using a proxy server, check your proxy settings, or check with your network administrator to make sure that the proxy server is running. If you don't believe that you should use a proxy server. Here's a video tutorial:

  Also, if you can since I don't remember which browser your help that gave you this message that I had to go with IE as a default.

• Unable to connect to the Skype server!

  Always write can not connect to the Skype server. just like others. I use version 4.2 without problems, but about 1 week ago can't connect on Skype. Always write this message and try after 2 minutes later. Doesn't work, I try to download the latest version and at the end of installation even message, unable to connect to the Skype server. No problem with our PC

  Interestingly, I can't go to my Skype account with login Skype from my Windows Phone (Nokia Lumia 630).

  Conclusion is any problem with your server and connection PC, dosnt matter version of Skype. Please fix. I hope in a short time. Thank you

  Best regards y):

  

  having exactly the same problem on my Mac when I try to connect it just gives me that a message could not connect to the server. Can go to my ipad, same account etc, but not on the desktop. Anyideas? I tried to download latest version, but that does not help

• Whenever I connect to a remote connection, I get an error message "unable to connect to this Terminal Server session remote control"

  Original title: unable to connect to this Terminal Server session remote control?

  Whenever I work with my friendly by connecting remotely, this information is pop ups as follows:

  Remote control cannot connect to this Terminal Server session. It is a known problem with Windows 2000 and XP and can occur under certain, rare conditions. To remady this situation, ask the local user switch to another session (connecting, on or off), or restart the computer.
  I know it's something related to windows authentication. But want to know in detail about this notification.
   

  Hi Victor,

  The question you posted would be better suited in the TechnNet Forums.

  I would recommend posting your thread in the link below:

  (Services Terminal Server) remote desktop services:

  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads