One of the keys on my doesn'respond Satellite U500

Similar Questions

• How to reset the EOS Rebel SL1 to factory settings? There is no setting in one of the keys.

  I tried the reset, read and watched the video intructions but my camera is not a "clear settings" under ONE of the functions of the menu. My menu consists of 2 camera, arrow 2 and 3 key icons.   It is different from any that I have seen in books or online.  I would be grateful for any guidance.  Thank you.

  Put it in p mode. The menus are considerably simplified in the green square.

• can I remove one of the keys on my keyboard on my computer portable pavilion g6

  Product number is A1J18AV

  There is something behind my "D" key on my keyboard and it is difficult to press. Can I remove the key? and if I can, how?

  Hey armyman1016,

  Unfortunately, you can't take off individual keys. You can take the entire keyboard that will not give you the ability to watch under a certain touch, however.

  Now, if a small vacuum cleaner with a brush is available, use it to clear the keyboard of the debris. A can of compressed air can be used to blow the particles that get between the keys.

  Hope that answers your question.

  THX

• Question about the universal power adapter car for Satellite U500

  There are different types of adapter car 12 volt on the market with different powers - that's good, but some "automatically select the output voltage.
  These units have a reputation of reliability or security for the laptop or are they to be avoided?

  Hello

  The problem is that in most cases these s universal adapter takes care of different intensity values
  You can change only the value of the Volt, but not the ampere ampere would change automatically and depends on the selected Volt.

  I would not recommend these universal adapters because the laptop needs some value ampere
  I recommend buying an adapter that is designed for this laptop to avoid some hardware problems

  Get in touch with the local ASP to get such part

• Satellite U500 - deactivation of signal that appears urgent multimedia keys

  whenever I touch the volume - or + on my Toshiba Satellite U500, a sharp loud and irritating beep button a pressed beem.

  How can I turn off this sound effect?

  Hello

  I don't know if you can disable this m.
  I know it s not related to Windows sounds.
  That's why I put t think you could disable this in Win 7 sound customization settings.
  I think you should take a look in the BIOS for some options...
  Check this box

• Re: Satellite U500 - 18K - where is the bag and the driver on the CD?

  I just bought this laptop yesterday and when I read the manual book its has said that the package includes the bag and the driver on the CD but I had none of them, only the laptop and the power cable.

  When I ask the man to store, he says, it's all... no other. Where can I ask questions about it? Or is it a common thing?

  Hello

  Can you please tell us what page you found this information? This does not to me you get a bag and the driver on the CD with Notepad.
  Can also explain what you mean with CD driver?

  I checked the manual of my Satellite U500 and it shows the following information about the material delivered in package:
  + Toshiba Satellite U500 laptop PC +.
  + Universal AC adapter power cord + and
  + Battery (is preinstalled on the computer).
  + Cleaning cloth (is included with some models).

  So I didn t find any information on the things you want to say

• Re: Satellite U500-17 t Ducati - cannot start the BIOS update tool

  Brief description of the problem:

  I got by Satellite U500-17 t Ducati with Vista on board and he downgraded to XP Pro SP3.

  Everything works fine, but I can't start * [self-extracting tool Windows BIOS | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 855 selSho rtMod = 887 & language = 13 & selOS = 10 & selType = 4 & d = yearuploa & monthupload = & dayupload = & useDate = null & mode = Chinas allMa & search = & action = search & macId = & country = all & lectedLanguage be = 13 & type = 4 & page = 1 & ID = 73306 & DISO =-1 & driverLanguage = 42] *. It works simply and nothing happens.

  For my previous experience of Toshiba laptops I remember that I have to install some tools Toshiba to make possible update BIOS, so I installed * [common Module | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 855 selSho rtMod = 887 & language = 13 & selOS = 10 & selType = 93 & ad = yearuplo & monthupload = & dayupload = & useDate = null & mode = g machines & search = & action = search & macId = & country = all & electedLanguage s = 13 & type = 93 & page = 1 & ID = 71037 &] DISO = 10 & driverLanguage = 42] * and * [Hardware Configuration | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 855 selSho rtMod = 887 & language = 13 & selOS = 10 & selType = 259 & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 259 & page = 1 & ID = 71076 & DISO = 10 & driverLanguage = 42] *. Well, installation of equipment installed OK and really works with the BIOS, but steel Toolbox update does not work.

  So the question is - what to do to run the Windows-based update of the BIOS?

  HW: Satellite U500-17 t Ducati (PSU5EE-01G029ND)

  OS: XP Pro SP3

  Can you please tell us why you want to update the BIOS of your laptop?
  You may have noticed a problem that must be fixed with a BIOS update?

  Is WXP SP3 you use original Toshiba recovery image?

• Am I able to configure a wireless iMac keyboard to emulate the way a Windows keyboard responds to a depression of the DELETE keys and BACKSPACE?

  Am I able to configure a wireless iMac keyboard to emulate the way a Windows keyboard responds to a depression of the DELETE keys and BACKSPACE? I want to delete either to the left right GOLD of the cursor. By pressing the DELETE key on Mac does remove one way, but I want the ability to delete in both directions. The Windows keyboard provides a delete key to remove to the right and a key to return back to remove to the left. So I can configure an iMac for this keyboard? My thought is to keep the delete key as it is and ADD a new function to one of the function keys to delete characters to the left. Thanks for your time and your help.

  Mac can go both ways, in case this is useful.  You can use fn more delete to delete to the right.  Also control more.

• When you enter the product key it says... THE CD KEY YOU ENTERED DOESN'T IS NOT VALID

  HEY THERE EVERYONE

  WELL MY COMPUTER CRASHED, SO I BORROWED A CD FROM A FRIEND'S XP, EVERYTHING WAS FINE UNTIL I HAD TO ENTER THE PRODUCT KEY (THE ONE ON THE SIDE OF MY COMPUTER) WHEN I WALKED SEVERAL TIMES IVE HAD THE SAME MESSAGE... THE CD KEY YOU ENTERED DOESN'T IS NOT VALID. WHAT CAN I DO? MY FRIEND TOLD ME THAT IT MAY NEED TO BE ACTIVATED?
  Help, please

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• How can I fix this error message, the address has not been understood Firefox doesn't know how to open this address, because one of the following values for protocols (connectag

  We have a new computer and I can't get my watch running from garmin for synchronization with mozilla. The error message I get is "address not was heard.

  Firefox doesn't know how to open this address, because one of the following protocols (connectagent) is not associated with any program or is not allowed in this context.

     You might need to install other software to open this address."
  

  Help please

  Hi grranchgirl, if you have an "Always enable" and "never activate?

  I don't know if the terms 'modern' and 'classic' mean anything to you, but there is a thread on the Garmin forums that might be useful - it is very long and I didn't read it all.

  https://forums.Garmin.com/showthread.php?79956-modern-Garmin-connect-mostly-doesn-t-work-in-both-Firefox-and-chrome & p = 330634 #post330634

• Hi, while writing an email online using Firefox 3.6.3, I was using one of the "CTRL + left arrow or right" to move the cursor on the text. I must have pressed some other key because the screen has become huge - and I can't scroll vertically or horizont

  Hi, while writing an email online using Firefox 3.6.3, I was using one of the "CTRL + left arrow or right" to move the cursor on the text. I must have pressed some other key because the screen has become huge - and I can't scroll vertically or horizontally, which makes the pages of Mail of Hotmail impossible. I have connected since using the Explorer MSFT and it works very well. This problem occurs only on the page of Mail of Hotmail Live not on the home page or other.
  Could you please let me know if there is a problem with Firefox, or if you have any advice on how to restore the appearance of Hotmail in Firefox?

  This has happened

  Just once or twice

  == I'm compiling an email in Hotmail Live

  See this:
  https://support.Mozilla.com/en-us/KB/page+zoom

• Satellite P10, internal keyboard: the key of the pipe doesn't work anymore

  Hello everyone!

  I have a Satellite P10 with WinXP (SP1) for about 1 year.
  Symptoms: it's the internal keyboard. I used the key pipe <|>indeed, not every day, but it worked. And suddenly, I see that it does no more: it is 'dead', while all other keys work correctly...

  My next steps:
  (1) I uninstalled the driver of standard keyboard (101/102 keys) or Microsoft Natural Keyboard (PS/2) keyboard, and were found after Windows starts. There is no material conflict under the Device Manager or the information system, the driver runs correctly...

  (2) the keyboard layout is German. But I have already tested the English (United States) too: the result is the same.

  Questions:
  (1) is the key physically damaged?
  (2) otherwise, what I can do to solve the problem? Where can I get a newer driver perhaps?

  Thanks in advance!

  Post edited by: MischaG

  Hello

  As far as I know that it is not necessary to install a driver for keyboard. The driver is built into the OS. If the button is dead and doesn't work at all, it is probably defective.

  Good bye

• What windows key you use to activate one of the virtual machines on my Hyper-V on Windows Server 2012 R2 Std

  I installed my Hyper-V role and now wants to activate one of the virtual machines, but the key is not recognized.  Should what key I use?

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you in the Forum of Hyper-V on Technet.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverhyperv

  Or:

  TechNet Server forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• The key saved on my eMachine is different than the one on the side of the case. Why?

  Windows vista key

  I bought an emachine with vista 09 I recently made a resumption of sys the record key showed is different from the one on the cover of pc why is this

  Computers that come pre-installed with Windows usually manufacturers come with two product keys.
   
  OEM SLP: It's the key provided in Windows (from the factory). It works by connecting to a flag of BIOS (SLIC table) found only on the computers of this manufacturer. Once he sees the correct BIOS indicator, it auto active.
   
  COA SLP: It is the key on the sticker on the side, bottom or in the compartment of your machine. The purpose of this key must be used in the case that the OEM SLP activation stops working for some reason any.

  The key to the recovery system uses if the OEM_SLP key.

• I have a laptop used with WIndows Vista, which came with a product key (the one on the label at the base is incorrect). What can I do?

  I have a laptop used with WIndows Vista, which came with a product key (the one on the label at the base is incorrect). What can I do to get one?

  What you trying to do? buy an operating system (like Vista for example) or to purchase Office (located on the top of Vista)?

  You can buy Office 2010 here: -.

  http://Office.Microsoft.com/en-us/buy/

  -If you want to. Be sure that it will run on Vista by checking the: -.

  The system configuration required

  -hyperlink on the page above.

  If my comments have helped please vote as helpful.

  Thank you.

  You can buy an operating system here: -.

  http://www.microsoftstore.com/store/msstore/PD/ProductID.235488300/TopSeller.true

  For future use, the type of problem you have raised should be posted here: -.

  http://answers.Microsoft.com/en-us/Office/Forum/office_install?page=1&tab=no