onscreen help extended after installation an old PC program!

Similar Questions

• Dual monitor boot problem with Windows 7 Professional 64 bit after installation of any graphics program like a game.

  I have built this platform with the help of the owner of a store of 4 cumputer teir 2 years ago. We initially put Windows Vista 32 bit on the system to Vista 64 bit unstable atm. For 2 years, the computer worked like a dream. Last week I made a clean wipe of windows vista and windows 7 professional 64-bit installed. The system has two monitors. The primary monitor is a sony bravia with 26 "led and secondary for watching movies is that a 55 '' led Samsung 1080 p 240 Hz. The graphics card is a geforce GTX 295 nividia. It has 12 GB of Ram and the CPU is an i7 965 @3.20.

  The problem I have is this. After the installation of any game average to work with windows 7, the screens to reset their resolutions automatically more than a few times as they are confused. Sometimes, I have to return the screen to its correct resolution after installation in full. Most of the games and then run fine. After installing the game or any game designed for win 7 startup of computers is all messed up for the monitors. After starting hand 26 "sets its resolution and then after about a second 30 pause the computer makes the sound (the double) that it is resolutuons to reset monitor again? After that this second reset about 1-2 minutes the computer is good to go, unless it sets the res evil. The problem is the computer has never done that with vista and it is very annoying say the least. It still freezes the installation of some games. The only way to resolve what I found is the restoration of the system. The computer starts normally and screen ground is defined once she has always been. The only problem is when you install another game, the problem is their new. This problem is worse in some games.

  The latest nvidia drivers have been installed. There is no conflict in the device with the exception of an old printer Manager. The two comes is set to 60 hertz. I searched all over the internet and there seems to be a problem with windows 7 without solution. I am at a loss. Any other information that you need let me know and I'll post it. Thank you!

  Hi ancientone618,

  It sounds almost as if there is a Windows update that is in conflict with your NVIDIA Driver Installer.  I would say to disable automatic updates of Windows to see if it might help:

  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  In addition, please see the article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Accounts domain after installation user and loading programs

  Hi all

  I hope it makes sense that I have never had a solid understanding of the creation of user accounts especially those that are added to a domain. I have to install windows 8.1 on my laptop and I need to have a person of my work add a user to our domain. What I am curious about i, s, what happens if I installed windows 8 and all the programs I use until the user has been added to the field. This user will have access to all the programs that have been installed or would potentially be that I have to perform a hack or re - install programs on this account? Any help would be appreciated.

  Yes, you should, but if your company is using Group Policy with a pre-approved list of apps, you may not be able to launch your applications, unless you log on to the local account.

• Is the plug-in Java TM helps against hacking and viruses after installation?

  Is the plug-in Java TM helps against hacking and viruses after installation?

  @ Otto Davis

  Are what plug-in "TM" you referring?

  And, no, it does not protect against the 'hacking' or viruses.

  Be sure to have an antivirus installed, & always up to date and scan application at least once a week.

  In addition, beyond that, you must practice safe use pc surf / safe.

  Some of the most common infections of malware are 'facilitated' If you have outdated version of the Java, Adobe Flash Player, Shockwave Player, and Adobe Reader.

  Configure your Antivirus software to check the updates on a daily basis, at a time where you are sure that the computer will be on.

  Arrival to Windows Update and install updates important offered--> http://windowsupdate.microsoft.com

  Make sure that automatic updates is enabled.
  How to configure and use automatic updates in Windows
  http://support.Microsoft.com/kb/306525

  Verifier check on other issues of update, visit Secunia Online Software Inspector (OSI)--> http://secunia.com/software_inspector/

  HTH

• I have an error message after an update, WindowsUpdate_0000737D""WindowsUpdate_dt000, can someone please help, my computer installs updates whenever I stop. "

  I have an error message after an update, WindowsUpdate_0000737D""WindowsUpdate_dt000, can someone please help, my computer installs updates whenever I stop. "

  @cinziac (who has not declared his complete version of Windows):

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Need help. After the installation does not start Lightroom 6

  I am a subscriber of plan of photography and just upgraded my copy of LR of 5.7.1 to 6.0 through the creative Application of cloud. Unfortunately, when I click on the shortcut of Lightroom on the windows desktop or when I try to launch Lightroom 6.0 in the menu file directly, nothing happens, which is Lightroom does not start and does not present as an application running in the Manager of tasks). I tried uninistalling and reinstall Lightroom 6.0 and the computer restarts, but none of these has solved the problem. 6 of Lightroom won't start or run. Does anyone else have this problem or is anyone know what I can do to get Lightroom 6.0 to run?

  HA, I found help in this thread: LR CC 2015 hangs after installation on Yosemite 10.10.3

  I just need to log out of my account in the creative cloud application, sign and everything started working again!

• Expiration of my subscription of the CC, I bought a new but not be able to use again. He's trying to use the free trial version at the same time, but after installation of app still redirects me just say renew subscription and won't let me open. Help, ple

  Expiration of my subscription of the CC, I bought a new but not be able to use again. He's trying to use the free trial version at the same time, but after installation of app still redirects me just say 'Renew subscription' and won't let me open. Help, please

  Contact adobe support, https://helpx.adobe.com/contact.html

• I need help for Windows Media Player to start after installation. I click on the icon and nothing happens. I have try the exe file in the program folder and still nothing.

  I can't get Windows MEdia Player to start once I install it. My PC crashed and I reinstalled XP Pro. and did all the updates that were needed. Then I installed Media Player 11 and tried to boot, and it wouldn't start. I tried to boot from the program folder files, and still he wouldn't. I uninstalled and reinstalled several times and sometimes it worked once after installation then once you close it never starts again. What should I do to make it work. I need my music and videos.

  I can't get Windows MEdia Player to start once I install it. My PC crashed and I reinstalled XP Pro. and did all the updates that were needed. Then I installed Media Player 11 and tried to boot, and it wouldn't start. I tried to boot from the program folder files, and still he wouldn't. I uninstalled and reinstalled several times and sometimes it worked once after installation then once you close it never starts again. What should I do to make it work. I need my music and videos.

  ================================
  In some cases, there may be multiple instances of
  WMP running.

  Try to open the Task Manager and look for the instances
  from: wmplayer.exe and complete the process on each of them.

  Also... Take a look at the following article:

  (925704) when you try to use Windows
  Media Player 11, the program does not work
  Start or some user interface elements are empty
  http://support.Microsoft.com/kb/925704
  John Inzer - MS - MVP - digital media experience

• Error occurs after installation of Service Pack 3

  Windows XP starts after installation of Service Pack 3 only in safe mode.
  What about this error, the machine doesn't turn after restoration (to an old restore point) very well, but in this case that I do not have Service Pack 3.

  Can I install updates that are unique in the future, or do I have service pack 3 for windowsupdates in the future?

  Kind regards

  Pluto

  http://support.Microsoft.com/kb/950717

  Steps to take before you install Windows XP Service Pack 3

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Support: https://support.microsoft.com/oas/default.aspx?gprid=1173&st=1&wfxredirect=1

  TaurArian [MVP] 2005-2010 - Update Services

• After installation of Vista business, I have the folder Windows and Windows.0. Can I delete one of them?

  Dear Sir or Madam,
  After installation of Vista business, I have the folder Windows and Windows.0. Can I delete one of them? How can I check that I can delete to free up space. Windows folder takes GB 10.00 and file Windows.0 contains 26.3 GB. Thank you much in advance.

  Noppamas.k

  Mat9

  You can simply DELETE THE WINDOWS. O file if your computer is running norml:http://support.microsoft.com/kb/933212
  This will give you more space.

  If your computer does not correctly him follow these steps:

  The single was is to back up all you produce, programs, data, but does not back up the WINDOWS. O file. You can delete the folder before making the back-up. Back to the top of your files before you begin reinstalling Windows, even if you're reinstalling Windows on a hard disk partition. A clean installation replaces the current version of Windows and all personal files

  On start-up MODE MINIMAL step #7 you want to make sure that DELETE you PARTITIONS
  It will give you an option and a list for delete you old partitions

  CLEAN BOOT

  http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.

• Uninstalling the program PS CS4 Extended after upgrading to PS CS5 Extended

  I have finally acclimated to my upgrade to PS CS5 Extended after transfer on presets, brushes, actions, etc. and decided to uninstall CS4.  Of course now when I open CS5, I get an error message indicating some of the support files are missing and I need to reinstall PS CS5.  Since it's an upgrade from versions CS4 which is no longer on the computer, I have to reinstall CS4, then reinstall the update to CS5?  Or is it possible to simply reinstall CS5 and do with it?  Since it was an upgrade, bought through downloading, and I deleted the picture disc, where can I find the download of the upgrade?  Any help or suggestions are appreciated.

  All the updates of Adobe are plenty of installers.

  If Setup does not find a qualifying previous version installed, it will simply ask for the old serial number, but also a new.

• Windows 10: After installation

  9 days ago I installed Windows 10 successfully on my iMac end-2012. I wonder since if I still need to keep my USB Flash drive plugged after installation. I have kept in just in case wherever she would break something and tried to find an answer but decided to ask here. So basically what I have to keep the flash drive in my iMac or will I still be able to run Windows 10 unless it is plugged. Thanks for all who will read this and help me with this problem.

  I see no reason to keep the flash drive is plugged.

  Was this a new installation or an upgrade of Windows 10? Your order of brightness of the keyboard (and other features on the row of function keys) work? Cam sex? Touchpad?

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• After installation of the latest version of firefox on the homepage still says that I don't have the latest version

  After installation of the latest version of firefox and I use the new icon on my desktop, it always says that I don't have the latest version. Installation will correctly

  It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox, I do not think that it is maintained by Google.

  From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.

• can I uninstall MS Office 2008 AFTER installation of MS Office 2016?

  Can I uninstall MS Office 2008 AFTER installation of MS Office 2016 without causing a problem?

  Yes you can. Also, what follows has information on uninstallation of 2008 that can help: http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macstart/how-do-i-uni nstall-office-2008-now-that-im-using/147...