OOB management tab is not available in CAM

Similar Questions

• Yoga HD + 4.4 Android tab is not available

  Hello

  One of my former Lenovo tablets - a model number of Yoga HD + B8080-F - is on Android 4.3 yet up2date says system update is I know positively is not correct.

  The story that is was recently expelled for warranty repairs as the accelerometer on the original motherboard stopped working and so not auto screen rotation.

  Motherboard has been replaced and a new will only move to Android 4.3 while the former was about 4.4 something.

  I searched the forums for solutions but all failed so far. In some cases, the serial numbers of motherboards was required to be sent to one of the admins, and then their problem disappeared?

  Help, please

  Thanks in advance!

  -Cheers

  This time I managed to find the information that I have not found the last time, I looked into why 4.4 wasn't available in OTA a month ago. Had not had more priority as tablet is a little dated and therefore mainly used to watch the news before going to bed and play music via bluetooth, and for the most demanding tasks, I use my most recent tablets. But he still harassed me.

  It seems that there is a kind of 'secret' regional code that is not available in the normal system settings and does not seem to have any influence on what is available through the normal control panel and how the dates are formatted etc as windows regional settings. And really the repair shop should have set it properly before returning the tablet to me - they do not have the part.

  To access the secret area code you open contacts and in searching for contacts to "# 6020 #" (without the quotes). Now, you are presented with a picture of the country. Choose one close to you if your country isn't there. To get the 4.4.2 you must choose a European country. I chose UK that the Denmark was not on the menu. I probably could choose Germany or Sweden too with the same result. But good manufacturer a lot have a strong preference for things more recent English country first UK so ABOVE.

  CAVEAT! If you do not change the regional code 'secret' the Tablet is set to zero without warning! The Tablet restarts right after selecting the new region!

  After changing region in the UK there was a bunch of updates (continue to go to updates up until he says up2date) and tablet is now on 4.4.2.

• Manage the option not available & administrative tools not available

  Using windows 7 Home Basic in my laptop. Now am not able to get to 'manage' option to right-click on 'My Computer' & when I try to access administrative tools in the control panel his watch an error as the location is not available. What should I do? Help, please.

  Feisal

  Hello

  1. What is the exact error message do you get?

  2. have there been recent changes to the computer before the show?

  Method 1: I suggest you of scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2: Also I suggest to open the original location administrative tools and check if the same problem persists.

  "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors."

  Method 3: you can also your computer in a clean boot state and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Files Management tab does not appear in the import module. I think that I have configured some settings but am unable to change. I restored the factory default preferences, removed and reinstalled on Macbook, but they are always there for example allow du

  I am new to Lightroom and I followed a guide that allowed me to set import preferences. Now I want to change them, and although I see them in the import dialog box small I don't see a "File management" tab at any time. I have reset factory default in the preferences and removed and re-installed on my Macbook, but they are still there.

  Any advice would be much appreciated as I'm looking for guides and forums but did not find any specific help. Thank you.

  Click on apply when importing

  You see file handling

  If so just select

  

  Hope this helps

  Assani

• Performance tab data - not available

  I am running vCentre 4.0.0 with SQL Server 2008 installed on the same server. I am able to view the summary of 1 day for all virtual machines and hosts, but when you try to look at the other options, I get a message indicating that no data is available. When you go to advanced options, the received message is "performance data are currently not available for this entity."

  Concerning

  Dan

  Verify that SQL Server agent is running.

• Oracle Configuration Manager server is not available (500)

  I have a few goals as the configuration of the report for My Oracle Support, using the Oracle Configuration Manager.  Everything was fine until last week when I noticed that the last Date of collection was not changing.  When I try to manually collect, I get the following error:

  E:\ > ora11\product\11.2.0\dbhome_1\ccr\bin\emccr collect

  Oracle Configuration Manager - output: 10.3.8.1.1 - Production

  Copyright (c) 2005, 2013, Oracle and/or its affiliates.  All rights reserved.

  ------------------------------------------------------------------

  Unable to determine if mandatory packages available.

  Error occurred during the update of recovery. Oracle Configuration Manager server is u

  navailable (500).

  Collection and download failed.

  E:\ >

  Anyone else facing this problem?  If so, no idea how fix this problem?

  It turns out that this is planned, as Oracle launches a database upgrade.  This notice was posted on MOS:

  Configuration in read-only Mode data

  We are making improvements to the database that contains the configuration data for My Oracle Support. During this upgrade, the client Configuration Repository (CCR) is currently in read-only mode. You can view the configuration data, but will not be able to download new configurations or change the attributes related to the configuration of the systems. The CCR will be in read-only mode until the termination of the stoppage of My Oracle Support planned this weekend.

  While CCR is in read-only mode, you will see an error message:

  • In the corresponding log file during an attempt automatic download a new configuration or for offline Collector users who download their configuration as an attachment the Service request.
  • On My Oracle Support pages that access configuration data
    • Mainly under the systems tab
    • Sometimes in the Patch and sanitation recommendations

  When the CCR returns to the update mode after the failure, your last successful download will remain in place as the benchmark to determine the differences with the current configuration. The next collection that you send will update your configuration and would then become the configuration used for comparisons.

  Please apply for a non-technical Service or to contact the Oracle Support if you need help or have additional questions.

• Under XP, cannot turn off the Windows Firewall settings tab is not available

  My operating system is windows xp (sp3). The firewall is turned on. I want to disable my firewall. But, in my windows firewall set or disable tabs is inactive. Why is this idle setting? What can I do to turn it off?

  Hello

  · Will there be any changes made on the computer before the show?

  You can run the fix it from the link below and check if this can help: diagnose and automatically fix problems of Windows Firewall service: http://support.microsoft.com/mats/windows_firewall_diagnostic/en-us?entrypoint=lightbox

  Also access the link: you cannot enable or disable the Windows Firewall on a Windows XP Service Pack 2 computer setting: http://support.microsoft.com/kb/914230

  Note: A Firewall is software or hardware that checks information coming from the Internet or a network. Firewall blocks some information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.

• Correct tab is not available in the assets

  Hi all

  I used the function retrieves online in the creation of capital of cloud. But today, I downloaded a psd file and there is no option of extraction as seen in the photo. It was available a month ago. I checked the documents, and according to the documents it must there have extracted tab after the activity tab. Can anyone help how can I extract?

  

  Please check if this helps: what is pious Adobe #Adobe? How you can stop #Extract?

  Please visit: what happened to active tab gets in creative cloud?

  Concerning

  Stéphane

• Profitability and cost management application is not available in the workspace

  Hi all
  
  I hope someone in this forum can help me with this.
  
  I built a profitability management application and costs in the workspace. I have validated and deployed it sucessuflly. But when I try to open the app, I am not able to see profitability in the Menu or Navigate menu open in the workspace.
  
  Can someone tell what could be the cause for this?
  
  Some information:
  
  I have deployed an application with the "default application group" with "again and cost management.
  
  I created the Group application separately Profitabiilty and costs in Services management shared.
  
  Kind regards
  Subramaniam Gaudin

  What is 11.1.2.x?
  You have activated the product, Coordinator, in workspace server settings?

  See you soon,.
  Abhishek

• When you create a booklet PostScript file, print settings "Setup" tab is not available

  I am creating a tabloid format (folded in half) booklet, but the print settings dialog box does not allow me to change the page size of tabloid... Someone knows how to fix this?

  

  Thank you!

  For anyone else that falls on this:

  1. Quit InDesign.

  2. Navigate to/Applications/Adobe Indesign CS5/Presets /.
  3. In the 'Presets' folder, create a folder called 'PPD' (the name of the file is case-sensitive).

  4. Control-click on the following link and choose Save link under download the Acrobat 9 PPD:
     Acrobat 9 PPD

  5. Place a copy of the PPD downloaded into the folder created in step 3.

• CS5 Adobe Extension Manager 5.0 not available for manual download for windows on the Adobe site updated

  There are two updates for Mac for the "Adobe Extension Manager CS5 5.0 Update' so it can be downloaded manually. Unfortunately for Windows users there is no manual download when the "Adobe Application Manager" is unable to install the required update. I just did a clean install and 'MAA' failure on all the required updates for CS5, so I got the updates of the software form the support pages. I would like to know where the Windows version of "Adobe Extension Manager CS5 5.0 Update" is on the adobe site?

  I pasted the wrong link at first, but I've updated the immediately. I guess you used the link in the electronic automatic replay. Please use the link on the web page instead: http://download.macromedia.com/pub/dw_exchange/extension_manager/win/AdobeExtensionManager-5.0.1-mul-AdobeUpdate.zip

• that means when I tried to download a trial version of Office and the download manager says that the contenct is not available in your area?

  does that mean when I tried to download a trial version of Office 2010 a download manager "content is not available in your area.

  Hello

  This previous answer can help you.

  http://answers.microsoft.com/en-us/office/forum/office_2010-office_install/i-am-trying-to-download-microsoft-home-and-student/742143fb-98a3-4a79-a093-de0c4200ed3a?msgId=870c5a01-caa6-433a-9517-de96e5e00107

  See you soon.

• License based device not available page

  I tried to find how to activate licenses device based on a lap in a school.  However, all of the links provided by e-mail or found through research, brings me to a "Sorry, this page is not available" page.

  https://helpx.Adobe.com/creative-cloud/help/manage-device-licenses.html#activate

  How will I know how to deal with the material?  In the admin console, I can see where I have a number of licenses, but can not see anywhere to check how to activate them.

  Thank you for the help, after a few pages of google to help adobe own pages where were not available, I came across

  http://TV.Adobe.com/watch/creative-cloud-for-enterprise/deploying-creative-cloud-for-teams - with-creative-cloud-packer.

  It showed me where to go for package manager to create a.  It would be nice if Adobe got their act together and makes sure that all of these pages as their link that are supposed to tell people how to do this nonsense actually worked.

• Recently closed tabs does not work for me

  Recently closed tabs does not work for me. When I go to history-> recently closed tabs is not available and the shortcut does not work. It happened a few weeks ago, and when it happened first, the shortcut would open the tabs in the weeks earlier. I can't find any information on this and would like to see it fixed.

  There are other things that need your attention on the updated the prefs that shows in your list of details of the system.

  Reset the general.useragent.compatMode.firefox to false, and all prefs network.http on the topic: config page.

  • http://KB.mozillazine.org/about:config

  What is the value of the browser.sessionstore.max_tabs_undo pref?

  • http://KB.mozillazine.org/browser.sessionstore.max_tabs_undo
  • http://KB.mozillazine.org/browser.sessionstore.max_windows_undo

• OfficeJet 4630: contrast on scan is not available

  When I scan the result has too much contrast, but the selector tab is not available, i.e. nothing happens when I try to move it.  I need to decrease the contrast.  How do I do that?

  I just found out on my own that the contrast only works with the shades of gray, not black and white or color.  Nowhere it says that.