Performance tab data - not available

Similar Questions

• Yoga HD + 4.4 Android tab is not available

  Hello

  One of my former Lenovo tablets - a model number of Yoga HD + B8080-F - is on Android 4.3 yet up2date says system update is I know positively is not correct.

  The story that is was recently expelled for warranty repairs as the accelerometer on the original motherboard stopped working and so not auto screen rotation.

  Motherboard has been replaced and a new will only move to Android 4.3 while the former was about 4.4 something.

  I searched the forums for solutions but all failed so far. In some cases, the serial numbers of motherboards was required to be sent to one of the admins, and then their problem disappeared?

  Help, please

  Thanks in advance!

  -Cheers

  This time I managed to find the information that I have not found the last time, I looked into why 4.4 wasn't available in OTA a month ago. Had not had more priority as tablet is a little dated and therefore mainly used to watch the news before going to bed and play music via bluetooth, and for the most demanding tasks, I use my most recent tablets. But he still harassed me.

  It seems that there is a kind of 'secret' regional code that is not available in the normal system settings and does not seem to have any influence on what is available through the normal control panel and how the dates are formatted etc as windows regional settings. And really the repair shop should have set it properly before returning the tablet to me - they do not have the part.

  To access the secret area code you open contacts and in searching for contacts to "# 6020 #" (without the quotes). Now, you are presented with a picture of the country. Choose one close to you if your country isn't there. To get the 4.4.2 you must choose a European country. I chose UK that the Denmark was not on the menu. I probably could choose Germany or Sweden too with the same result. But good manufacturer a lot have a strong preference for things more recent English country first UK so ABOVE.

  CAVEAT! If you do not change the regional code 'secret' the Tablet is set to zero without warning! The Tablet restarts right after selecting the new region!

  After changing region in the UK there was a bunch of updates (continue to go to updates up until he says up2date) and tablet is now on 4.4.2.

• Local service of custom data not available in the page template

  Hi guys,.
  
  I created a custom service that is return of Image in response as shown below:
  public void GetImage
  Producer = config.getProducerImpl () (producer);
  String capText = producer.createText ();
  m_binder.putLocal ("capText", capText);
  BufferedImage bi producer = .createImage (capText);
  m_binder.setContentType("image/JPEG");
  m_binder.m_contentType = "image/JPEG";
  AA ByteArrayOutputStream = new ByteArrayOutputStream();
  Wrapper DataStreamWrapper = new DataStreamWrapper();
  Wrapper.m_dataType = "image/JPEG";
  Wrapper.m_clientFileName = "image.jpg";
  ImageIO.write (bi, "jpg", aa);
  wrapper.initWithInputStream (new ByteArrayInputStream (aa.toByteArray ()), aa.toByteArray () .length);
  This.m_httpImplementor.sendStreamResponse (m_binder, wrapper);
  }
  
  I call this service into the page as a template below:
  
  & lt; img src = "http://localhost/ucm/idcplg?IdcService=getJcaptchaService" / & gt;
  
  & lt; input type = "text" name = "capText" value = "<!-$capText - > ' / & gt;"
  
  
  <!-$capText-> capText value is empty here. It is not available here.
  
  Please suggest how capText value may be available in the page template.
  
  Thank you

  Your custom class must extend a class of Service. Then use this line of code to access the value of the variable capText:

  String lCapText = this.m_binder.get ("capText");

  Let me know if it works!

• Beyond the performance data not available to a host through Virtual Center

  
  Hello

  I have an ESXi host that relates to the ' No Data Available ' under his paw through Virtual Center performance. Fine appears real-time performance data, but the latest data are not appear and give the error as "No Data Available".

  Within the cluster of 4 hosts, alone is to have the point above. Others are appearing fine performance data.

  In another cluster host ESXi too connected to the same vCenter, I see one of the host is to have a similar question.

  I checked:

  • All work Rollup SQL is run successfully the default schedule.
  • Restarted vpxa service connection to the host directly using the vsphere client.

  I followed the KB article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2007388 . as suggested in the article when I run the Sub SQL query I see there is no data within who. 

  exec sp_spaceused vpx_hist_statx

  name	lines	reserved	data	index_size	unused
  VPX_HIST_STAT1	NULL VALUE	NULL VALUE	NULL VALUE	0 KB	0 KB

  The output is similar (no data) if I run these queries:

  exec sp_spaceused vpx_hist_stat2

  exec sp_spaceused vpx_hist_stat3

  exec sp_spaceused vpx_hist_stat4

  Current configuration:

  ESXi 5.1.0 799733

  vCenter Server 5.1.0 Build 1123961

  Please help solve this.

  I actually planned for the downtime of the host and restarted it.

  Although loading performance data now.

  Thank you!

• Guide to Media Center TV - data not available

  Messages: 1

  This message was reported.

  Win7 Media Center w/tuner works very well for several months. Starting 2 weeks ago I get "No. DATA AVAILABLE" for all channels on the guide. Without the guide, I use the interface provided with the tuner card (not good UI) to see the future registrations and registration of calendar events.

  * Live TV works fine
  * Having uninstalled and reinstalled tuner drivers
  * When I ask to update the info guide it is said "a download is already underway"
  * When I go through the SET UP TV in Media Center it hangs on 'download current guide info' (if I skip this step, it turns out, but give the message 'serious mistake'.)

  In short - everything works well EXCEPT the download of the guide.

  Hello

  I suggest you follow the steps mentioned in the article below.

  Troubleshoot Guide downloading problems in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-guide-downloading-problems-in-Windows-Media-Center

  Note: Article is for Windows Vista, but the steps can be followed for Windows 7 also.

  You can also view the article mentioned below.

  Difficulties to download your Guide?

  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/record-TV/help/broadcast-TV-download-Guide.aspx

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Performance tab does not

  In vsphere (vmware esx 4.0.0) when I click on the tab performance on any device, host vm etc. I get nothing, or more precisely on the view sub-tab to set:

  This program cannot display the webpage

  Advice on how to fix?

  In vCenter server, verify whether or not the vmware web management service is running

• Not enough space in Runtime area. Data not available SMBios. Inaccessible BIOS

  Hello, I was trying a restore or Windows 7 install on a p6510y for a friend. Tried going into the bios to select which device to boot from.

  I hit F10, it says enter the bios or enter the configuration..., then it goes to a black screen with a blue bar at the top. The blue bar is bright blue in the middle and it fades to the edge of the screen. It is not animated. I see no text or the cursor blinking either.

  If I do not go into the BIOS, I get the message "not enough space in Runtime area. SMBios data will be unavailable"and if I hit F2 to continue, windows starts normally.

  I stripped the system down to a single stick of RAM, tried a different PSU, graphics card, vga cable, etc.. I removed the cmos battery and flies over the rider for a solid 30 mins. I can not even access the bios.

  It's a machine extremely strongly virused, I was able to install Windows 7 via disk external drive bootable. The recovery partition is still intact, although it seems empty, still too much space.

  I ran sp49851.exe in windows 7 on the machine, the installation has been apparently successfully, but the BIOS always behaves in the same way.

  I am at a loss, have spent many hours in checking these forums of discussion, does not. Is it possible for me to prepare a bootable USB key and manually install the bios? I extracted the contents of the exe to a folder but I don't know what to do next. The computer has a floppy drive port. For any help or suggestion would be greatly appreciated. Thank you in advance!

  I was able successfully to Flash the BIOS manually, and it behaves as it should. Here's what I did:

  I extracted the contents of my bios file (sp49851.exe), using a program called Universal Extractor.

  I renamed the file alo6.09 to bios.rom (this was the only file required)

  I followed this guide:

  http://www.BIOS-mods.com/BIOS-update/

  Make SURE you get the HP USB Disk Format Tool, they provide a link.

  Make SURE you get the BACK image they provide a link for.

  I used AFUDOS for my AMI BIOS, from which the above ROM file extension. (they provide a link to AFUDOS)

  I used the command line afudos bios.rom/p/b/n/c/e/k/q/reboot (EXACTLY) how they said.

  Went straight into the BIOS, was able to make changes. System seems to work fine. It is very important that you read all of this guide and be absolutely sure that you have the good BIOS before updating. Thanks for the help Dave!

• Under XP, cannot turn off the Windows Firewall settings tab is not available

  My operating system is windows xp (sp3). The firewall is turned on. I want to disable my firewall. But, in my windows firewall set or disable tabs is inactive. Why is this idle setting? What can I do to turn it off?

  Hello

  · Will there be any changes made on the computer before the show?

  You can run the fix it from the link below and check if this can help: diagnose and automatically fix problems of Windows Firewall service: http://support.microsoft.com/mats/windows_firewall_diagnostic/en-us?entrypoint=lightbox

  Also access the link: you cannot enable or disable the Windows Firewall on a Windows XP Service Pack 2 computer setting: http://support.microsoft.com/kb/914230

  Note: A Firewall is software or hardware that checks information coming from the Internet or a network. Firewall blocks some information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.

• Correct tab is not available in the assets

  Hi all

  I used the function retrieves online in the creation of capital of cloud. But today, I downloaded a psd file and there is no option of extraction as seen in the photo. It was available a month ago. I checked the documents, and according to the documents it must there have extracted tab after the activity tab. Can anyone help how can I extract?

  

  Please check if this helps: what is pious Adobe #Adobe? How you can stop #Extract?

  Please visit: what happened to active tab gets in creative cloud?

  Concerning

  Stéphane

• Query for the extraction of data not available

  mst_company1
  
  company_year company_rating
  2001 A
  AA 2004
  2009B
  2010 C
  2011 B +.
  2020
  
  For the table above, mst_company1
  Years, from 2001 to 2020 and the coast for years are as shown above.
  There are few who do not have any side
  
  Now in the output, I need the following:
  
  output:-
  
  Quote of the year
  
  2001 A
  2002 NR
  AA 2004
  2005 NR
  2009B
  2010 C
  2011 B +.
  NR OF 2012
  
  In the output, the years that have a side must be displayed along with the next
  consecutive year should also be displayed with the rating of NR (No Rating).
  
  For example, 2001 a rating at least one, so that the next data to be displayed must be 2002 and must wear
  NR, 2003 should not be visible, and then 2004 that has a rating AA should be displayed
  and then 2005 side NR should appear, 2006 will not be displayed.
  
  Should which application I write to achieve?

  Hello

  Lol the query for your requirments is:

  WITH     got_next_year     AS
  (
       SELECT     company_year
       ,     LEAD (company_year, 1, company_year + 2)
                 OVER (ORDER BY company_year)     AS next_year
       FROM     mst_company1
  )
  SELECT       company_year
  ,       company_rating
  FROM       mst_company1
       --
      UNION ALL
       --
  SELECT       next_year     AS company_year
  ,       'NR'          AS company_rating
  FROM       got_next_year
  WHERE       next_year     > company_year + 1
       --
  ORDER BY  company_year
  ;
  

• Performance diagnosis is not available in the Windows Server 2008 Event Viewer

  In Event Viewer, I can see the Microsoft-Windows-Diagnostics-Performance/operational under Windows 7 but I couldn't get under another computer running Windows 2008. Is it possible to allow that?

  Hello

  Your Windows is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• OOB management tab is not available in CAM

  Hi all

  I have problem in cisco CAM. We have CAM in HA mode but when I connect the CAM it is no OOB management in the web console menu, but I have another version same CAM in vmware which is in stand-alone mode, the option (OOB management) is available.

  If someone have an idea please let me know.

  The CAM version is "Cisco Clean centimeters Standard Manager Version 4.7.2"

  Thank you

  Hello

  You must add a license OOB CASE to your CAM. Your switch options will be displayed.

  HTH,

  Faisal

• When you create a booklet PostScript file, print settings "Setup" tab is not available

  I am creating a tabloid format (folded in half) booklet, but the print settings dialog box does not allow me to change the page size of tabloid... Someone knows how to fix this?

  

  Thank you!

  For anyone else that falls on this:

  1. Quit InDesign.

  2. Navigate to/Applications/Adobe Indesign CS5/Presets /.
  3. In the 'Presets' folder, create a folder called 'PPD' (the name of the file is case-sensitive).

  4. Control-click on the following link and choose Save link under download the Acrobat 9 PPD:
     Acrobat 9 PPD

  5. Place a copy of the PPD downloaded into the folder created in step 3.

• Oracle sql developer - data not available after validation tool

  The data that is inserted into the table. If I run the select query, I can see the inserted data. But once I run validation, and then run the select query on the same window, no record found.
  
  It's strange looks. Don't know what the problem is.
  
  Kind regards
  Suresh

  Hi Suresh,

  Hope that you introduce into a global temporary table, where the table is created in the
  ON COMMIT DELETE ROWS.

  Thank you
  Shankar.

• "Battery use data not available" on the battery usage screen

  Just went to check out how was the battery and I got the above message.

  Someone knows how to fix this? I tried to restart and also clear the cache of general application.

  Thank you

  I got the same message several times when I tried to check a few minutes after plugging in the phone from the charger of the battery. Try W8 10 minutes or more after plugging in and check again.