OfficeJet 6600 uninstall error

Similar Questions

• HP Officejet 6600, uninstall problem 2081883398

  Hello

  I have a really frustrating problem with my printer HP Officejet 6600. I'm using windows 7, 64 bit.

  All of a sudden the scan function stops working.

  I tried to uninstall the HP Officejet 6600 Basic programs, but when uninstalling this has place of message:

  Error - 2081883398: failed to uninstall the device with serial number: C939DARJIJ05RN.

  If I choose ignore, uninstall the software, but the driver "HP Officejet 6600" are still there, but does not. In addition, this driver are listed in the device 30 Manager - 40 times.  I tried several methods to remove the driver.

  If I ignore this problem to uninstall and reinstall the programs basic HP Officejet 6600, everything is OK until I try to install the wireless printer. The program finds the printer and printers IP address, I mark a press "next". The message "Network Installation missed" takes place. "

  I have installed and uninstalled programs several times, tried to remove the drivers not working not (also in the 7z-cards back), but I have not managed to come around the problem.

  Please - I need help!

  OLHO

  Hi olho.

  This occurs due to malware or other non legitimate software on your PC, please follow the following steps to resolve this problem:

  1. From the control panel > uninstall a program. search for the following keywords:
     Bandoo, IAC, APN, SweetIM, iLivid, Ask Toolbar, SweetIM, Appshat, movies Toolbar and remove any existing result.
  2. Restart your PC and go to the Device Manager, check if these instances can now be uninstalled.
  3. Click the view menu and select Show hidden devices and then continue to search for and remove the printer from the printers / print queues / imaging devices / multifunction adapters / other devices.
  4. type % temp % of the start menu search bar. Open the temp folder, and then open the most recent installation folder that begins with 7z, then open the Utils folder.
     To open the X 86 a 32 bit OS, open the X 64 folder for a 64 bit OS... If you are not sure of your operating system type, follow these steps:
     http://support.HP.com/us-en/document/c03666764
     Run the RemovePreinstalledDrivers file and allow it to reach 100%
  5. Go 2 folders back to the 7z folder and locate the MSI Setup file:
     Research of * x86.msi or * x 64.msi, depanding on your type of operating system.
  6. Right-click on the largest MSI file out of the 2 resutls, then click on repair. If you get a prompt that it is no longer valid for select software installation instead of repair.
  7. Restart your PC.
  8. Open the Officejet 6600 software and follow these steps to reconfigure the device, check for the difference.

  Please let me know if this is useful,

  Shlomi

• HP Officejet 6600: Connection error when you try to use the Apps?

  I am trying to use the applications so that I can scan to e-mail.  When I try to open apps, I have a connection error.  I have run the wireless network test and all pass and the signal is excellent.  The eprint works very well.  I can't understand why I get a connection error when the wireless is configured and passes all the tests.  I tried scanning HP doctor thing and could not help solve it.  I'd appreciate any help.

  Thank you!!

  I had to delete web services and then add it again. Seems to work fine now. Thank you!

• HP Officejet 6600: Error in HP Officejet 6600 paper

  OfficeJet showing without paper loaded when the tray has a lot of paper in it. Have tried cleaning the rollers, but made no difference.

  Welcome to the HP Forums @hopuldey,

  I came across your post on your Officejet 6600 not detect the paper in the tray and advise you to load paper and wanted to tender hand with my own suggestions.

  Check out the guide below and try the steps in order. If the error persists, contact HP to discuss a replacement.

  Tip: Make sure that the printer is plugged directly into a wall outlet, avoiding bars power and surge protectors.

  • An "out of paper" Message appears and the printer is not Pick Up or paper source

  If you have trouble with the steps, let me know and I'll do my best to help.
  
  Click the thumbs below up to say 'Thank you' and 'Accept as Solution' if the problem has been resolved it please and thank you!
  
  All the best,
  
  Contact HP:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• OfficeJet 6600: Failure of printer, no error code

  Down printer, no code error.  Tried troubleshooting tips; Reset no has not worked and cleaning of copper on the ink cartridges, not working anymore.   Printer 3 years so out of warranty.   This printer is in a holiday home and I remove the cartridges in the winter.  Is this a problem?  Is there anything else to try, or do I need a new printer?  Tried to submit the form to contact HP 3 times for nothing helped... the site could use improvement.

  Remove the cartridges to store the printer for the winter is a major problem - which cause the printhead not replaceable to dry out, leaving probably clogged ink residues.  In the future if you have a printer with separate ink supply and print (like the Officejet 6600) heads the cartrdiges never be removed from the printer for more than thirty minutes at a time, and the printer should never be put off with the cartridges removed.

  The following may help recover the printhead (maybe 10% chance).  Turn on the printer, remove the cartrdiges impression and drip hot water on the screens on the print head which would connect the ink cartridges.  I put about 3 to 5 drops in each screen.  Let it sit for a few minutes, then replace the ink cartridges.  Run three cleaning cycles in quick succession the façade or the Toolbox.  Is there an ink at all on the page?  If yes let the printer sit overnight, then repeat the process.

• 'Open doors' error on HP OfficeJet 6600

  Hello

  I have a printer HP OfficeJet 6600. After I changed the 932XL with a new black print cartridge (original), I get an error: door open, with the message: "the door or lid should be closed to print. Make sure it is completely closed. »

  I checked the front and rear, door as well as the top cover (copy/scan), and all of them are CLOSED

  Any help? Any clue? Any idea?

  Thank you

  CAT

  Yes. I solve the problem, but in a way no, proffesional.

  I discovered that, when changing the black cartridge, a small pin located in the upper right of the front door, was broken (reliability?, quality?).

  Then I discovered that the PIN around which the Panel is rotating... is not only a PIN (hinge), but, if it is pushed in (horizontal movement) can act as a sensor push-pull. I stuck the "pin" with a small piece of paper o, I closed the door (with the broken ankle and... it works.)

  Hope that my non-professional explanation has been authorized.

  Kind regards

  Catalin

• OfficeJet 6600: Office jet 6600 "Scanner failure" error

  I have a relatively new (9 mos old) Officejet 6600. When I turned on it today I got this error "failure of the Scanner: unable to scan, copy or send a fax."
  It is not connected to a computer or network, and is used only for the copy and fax.
  Help! It is in my office and we copy ASAP!

  Hi @wwah,

  Welcome to the Forums of HP Support!

  I understand that you receive an error message on the screen of your 6600 HP Office jet printer. I'd be happy to help you with this.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document that I recommend that you try, products HP all-in-one - a 'Scanner failure' Message is displayed on the all-in-one control panel and you can not scan, copy or fax.

  This paper addresses issues in which a "Failure of Scanner" message displayed on the printer control panel. If a different error message is present, follow the steps in the section "Some a software problem or connection when you try to scan?" to find a document that answers to your problem.

• OfficeJet 6600. Works as a printer, but not able to start the scanner.

  OfficeJet 6600. Works as a printer, but not able to start the scanner.

  I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

  I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

  Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

  But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

  However, despite the property intellectual not recognized the device functioning as a "printer".

  But I need to use it as a scanner.

  Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

  Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

  Can someone, please?

  Thank you in advance.

  Hey,.

  Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

  Have a great day!

• OfficeJet 6600: cannot connect computer laptop 2nd in officejet wireless 6600 works fine on another computer

  Assistant on the computer Vista laptop found my wireless Officejet 6600 work that runs on another computer, but the wizard cannot connect it.  Gets the error code 0 x 00000643. Looks like a software problem in the laptop Vista.  It worked before on this laptop.

  Any suggestions?

  Hi @dburbage,

  I'm looking forward to see this resolved. Thank you for your patience and perseverance. Please follow the steps in the following document and let me know the result; HP monofunctional and MFPs - Windows: during the Installation of the network, a software "Installation error 2081883401: failed to uninstall the device with serial number:..'. Error Message on the computer.

  Thanks, I look forward to hearing back on your part.

• OfficeJet 6600 fails to print via WiFi in Windows 8.1

  My 6600 Officejet will not print anything wireless (with the exception of the test pages).  Many other posts about this problem, but after about 5 hours of research, nothing has helped.  When I got to the printer, it worked great, but then at some point that this issues started.

  Installation program:

  -Windows Pro 8.1 (my problems seem to begin around my upgrade from 8 to 8.1)

  -Router Asus RTN - 56U

  -Firmware version to print is MIM2CN1322DR

  -Install the latest drivers for printer from 11/03/14

  Details:

  -Whenever I try to print from any source (web, word, etc.) it fails to print and the dialog box displays a HP that says "doesn't have to communicate with printer."

  -If I run the new version of the HP Print and scan the doctor AFTER a failure to print it says 'Print Queue error fixed.  However it still does not.

  -If I run the new version of the HP Print and scan the doctor BEFORE a failure to print it says that everything is fine.

  -Sometimes I can get the printer to print after restarting the computer and the printer, but it seems that once the printer goes to sleep, it stops working.

  -Printing of the test pages always seems to work, and the printer indicates that it is properly connected to the network.

  I tried a bunch of stuff already with no luck, here's what I tried.

  -Tried to re-install the drivers (basic and complete) several times.

  -Uninstalled drivers, then crossed CC driver of the HP cleaning all the 4 steps, then reinstalled the drivers again.

  -Updated my firmware to the router

  -Checked for printer firmware update, none is available.

  -J' tried every troubleshooting step in this article: http://support.hp.com/us-en/document/c02221706

  Any ideas will be greatly appreciated, otherwise I could return this printer as I am out of ideas

  Hi Cheetah12,

  I was able to partially solve this problem, you can see the conversation in the post below.  It begins as someone elses question, but look for my first post in response.

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/error-message-quot-HP-OfficeJet-is-in-error-state-quot/TD-p/2752217

  I will basically be this amount until there is a bug with Windows 8.1 or HP drivers on the 8.1.  I had no problem in windows 8 until I upgraded to 8.1.  It may also have something to do with the fact that I did a full format when the upgrade to 8.1, I made an in place upgrade.  However after cleaning off the coast of a trace drivers, then reinstall and still do not have work, I'm skeptical about it.

  If you read the other post, I installed the printer, then I had to manually add the printer even through the IP address in the TCP/IP protocol in devices and printers.  A device uses the "HP". "Port and the other device uses the standard TCP/IP port.  There is now a duplicate, but now I can print to a printer (remember that I now have 2 devices for the printer).

  So, in my opinion, it's a problem of port, and since then I have lost enough time, I spend more time trying to figure this out for awhile.

• Pavilion 13 p111nrx2: Win10-upgrade, Null, Fax - HP Officejet 4630 series - error 0 x 80070490

  Win10-update, Null, Fax - HP Officejet 4630 series - error 0 x 80070490

  Every day or two, I get this Windows Update failed error (see above).

  Printer: HP 4630 all-in-one

  Computer: HP Pavilion 13 p111nrx2

  Model: E9L41UA

  Operating system: Windows 10

  64 bit

  I completely uninstalled the printer software and reinstalled and reset all my preferences in this regard.  Painful, but did not work.  Also printer keeps going offline and it is supposed to be a wireless printer.  Extremely frustrating to have a wireless printer which never seems to be wireless.

  Someone knows how can I fix the mistake of updating and/or the issue offline?

  Hello
  
  Thank you for using the HP Forums.

  1 start = > settings = > devices = >... . Click and REMOVE an INSTRUMENT: a) Officejet 4630 and b series) Null Fax Printer

  (2) uninstalled all components of 4630 Officejet series in the following order

  HP update

  Improvement of the product...

  Series Officejet 4630 help

  HP Officejet 4630 series based Device Software

  Law 3) clicking Start = > click on MANAGER of DEVICES = > (on my PC) printers = >... .clicked to highlight the Fax Null = > take action in the drop = > UNINSTALL

  (4) restarted my PC

  (5) installed the downloaded/saved full functionality of the HP printer

  (6) again restarted my PC, checked the DEVICE MANAGER (from selection right click Start) - FAX NULL is gone!, check the DEVICES of the SETTINGS (start = > settings), number, NULL, this time FAX - AND - the right HP Fax printer is now installed!

  (7) go ahead and look for the updates, my PC is now updated, no error should appear.

  Hope that helps!

• OfficeJet 6600: officejet 6600 will not be installed

  I have a computer that is running Windows 7 (updated) with a 6600 Officejet attached via the USB port. It worked fine for 3 years, BUT I had to reinstall the printer 7 times in the last 2 weeks. When I turn off the computer at night and turn on the next morning and I begin to print something, I get "no printer installed." It SEEMS to make no difference if I turn the printer off or leave it on when I shut down the computer.

  Any ideas?

  Rusty

  Hi @RustyDHH,

  Thank you for reaching out to the forums! I understand that whenever the computer is restarted, you must reinstall the printer software. I'd love to help you.

  I have provided a few steps to try to see if we can solve this to happen again in the future.

  Here are the steps to completely uninstall the printer from the computer.

  In devices and printers, click once on any icon listed and select the printer at the top of the display server properties, click the driver tab.

  Select the 6600 Officejet then click on delete, the pop up dialog box.

  Select Remove driver and driver package, click OK, click Yes in the confirmation pop up message. (if they are not in the list, it's very well)

  Then in the printers and devices window, right-click and select remove device for Officejet 6600 drivers.

  Unplug the USB cable from the computer.

  Uninstall the printer software.

  Restart the print spooler:

  Click Start, run, type admin in the search programs and files box and then click on the list management tools.
  Double-click Services.
  Right click on print and left spooler, click Properties.
  Click on stop to stop the print spooler.
  Click Start to restart the print spooler.

  Run the Microsoft Fixit Tool: diagnose and automatically repair Windows files and folders problems.

  Reregister Windows install:

  1. Quit all programs.

  2. Click Start, run, type msiexec / unregister in the Open box and click OK.

  3. Click Start, run, type msiexec/regserver in the Open box, and then click OK.

  4. Restart the computer.

  Disable all startup programs and temporarily disable the Antivirus software. There might be something running in the background cause of conflicts. How to use MSCONFIG. Click the Startup tab, and then click Disable all.

  Make sure that you are connected to the computer with Admin rights, and then reinstall the printer using the latest drivers. Here is the link: 6600 Officejet HP e-All-in-One Printer series - H711 full feature software and driver.

  If the problem is resolved and that you appreciate my help, please click on the button "Accept as Solution" and the "Thumbs Up". Let me know how make you out. See you soon!

• HP Officejet 6600: Fax/copy/scanning does not work

  I'm unable to use my fax/copy/scan on the printer functions.  The printer works well when printing from the computer.  I've done all the troubleshooting... Disconnect, restart it (printer and computer), etc.  All the reports that I ran to the 'troubleshooting' return with all PASSES.  But when I re - try these functions, the printer display "starting fax" or "Start scan" and "start copy."  I've been here for the last 10 minutes trying to get a copy, and the screen is still showing "start copy".  And while they are 'begins', I am unable to 'x', so I put off the printer.  The printer is 2 years old and we bought the extended warranty expired 2 months ago thanks for any help you can provide.

  Hello

  I will be happy to help you with that, may I know if you have tried uninstalling the driver of your PC printer and re - install the latest driver?

  1. Uninstall the printer driver HP Officejet 6600 of Control Panel
  2. Reinstall the printer driver for HP Officejet 6600.  Here is the link to download the latest print driver: http://www.support.hp.com/us-en/drivers/selfservice/HP-Officejet-6600-e-All-in-One-Printer-series---H7/4322968/model/4323587

  'Although I am an employee of HP, I speak for me and not on behalf of HP' 'say 'Thank you' by clicking on the star of congratulations in the post helped you. -Please indicate the position that solved your problem as "acceptable Solution".

• OfficeJet 6600 paper jam won't clear

  I have a HP Officejet 6600 e-all-in-one printer and got a paper jam the other day, but even after removing the paper, I keep getting an error message saying remove the rear access panel and remove any paper. The jammed paper is not tear or rip so there is no bit left in the printer. I tried all the options on the support page - including the cleaning of the rollers and a power reset - to do this, nothing helps.

  I've only had this printer a few months and I am at my wits end. I have never had a printer with this issue before that wouldn't clear a paper jam error.

  I asked my brother-in-law to watch just to make sure that I had covered everything. He concluded that the sensor in the back that detects the paper jams was, well, stuck. He loosened it so she moved freely again and now it works perfectly. It must have happened that I was the original paper jam remove the rear access panel.

  Thanks for your help.

• OfficeJet 6600/6700: How can I stop my HP Officejet 6600/6700 stop printing reports?

  I just installed a new HP Officejet 6600/6700, but whenever I have to send a fax it produces a report. If I misdial or there is no answer, it also sends a report. I see these just a waste of paper and ink. How can stop the production of reports - I have looked through the manual but find nothing in there to help. Thank you.

  Hello

  Please try the below mentioned steps that should solve the problem.

  On the front panel of the printer

  Press SETUP (wrench) > Fax Setup > Fax reports >
  the Fax Confirmation Off = value
  value = Off Fax error report