Open script... Dynamic values
I recorded a script to create an invoice, I'm trying to repeat the script for n number of times, I want to set the number of the invoice to dynamic value like "ABCD_1", "ABCD_2", "ABCD_3"...How can I dynamically set the value...
for example:
Forms
.textField (42,
"//forms:textField [(@name = 'INV_SUM_FOLDER_INVOICE_NUM_0')]") "."
*.setText("{{ABCD_1}}"); *
{
Think (0.666);
}
Thank you!
Hello
// Deriving unique number
long l_timestamp;
Calendar now = Calendar.getInstance();
l_timestamp = now.getTimeInMillis();
String s_uniquenum = new String();
s_uniquenum = Long.toString(l_timestamp, 0);
s_uniquenum = s_uniquenum.substring(8);
getVariables().set("ABCD_1", s_uniquenum); //if you want to add a string with dynamic number then use "your_string"+s_uniquenum instead of s_uniquenum
If variable ABCD_1 contains a unique number that is dynamic. You can use it as follows:
forms
.textField(42,
"//forms:textField[(@name='INV_SUM_FOLDER_INVOICE_NUM_0')]")
.setText("{{ABCD_1}}");
Solution based on the code found in Starter Kit
Kind regards
Dembélé M
Tags: Oracle Development
Similar Questions
-
Is it possible to display the dynamic value in the ToolTip?
I tried:
this.assist.toolTip.value = this.rawValue; for a text field on 'ownership' MouseEnter
but it does not display the current raw value. It displays a previous raw value of the field...
I wrote 'YYYY', but is not displaying on the first mouseEnter event
When I show event mouseEnter for the 2nd time it gives good value.
Now, I changed the "BBBB" value but the first mouseEnter event it displays the value previous i.e. "YYYY."
I found the solution. I wrote the script ("this.assist.toolTip.value = this.rawValue ;") on 'property MouseEnter' but the need to write the script to the "Output" of the field event. ")
Thank you.
-
As a dynamic values column names
I have a WEEK_TAB table
Week_num Bkg1 Bkg2
1 10 20
2 40 10
3 30 20
2 20 60
1-10-50
1-20-80
3 10 30
When I run this package, I get the below output...
CREATE OR REPLACE
PACKAGE GET_TOTAL AS
TYPE ref_cursor IS REF CURSOR;
PROCEDURE get_week_total (p_refCursor to ref_cursor);
PROCEDURE get_total_val;
END GET_TOTAL;
/
CREATE OR REPLACE
PACKAGE BODY GET_TOTAL AS
PROCEDURE get_week_total (p_refCursor to ref_cursor) AS
BEGIN
OPEN FOR P_refcursor
SELECT SUM (bkg1), week_num
OF week_tab
GROUP BY week_num
ORDER BY week_num;
END get_week_total;
PROCEDURE get_total_val AS
v_refCursor ref_cursor;
v_sum NUMBER;
v_week NUMBER;
v_total NUMBER: = 0;
BEGIN
get_week_total (v_refcursor);
LOOP
EXTRACTION v_refCursor
IN v_sum, v_week;
EXIT WHEN v_refcursor % NOTFOUND;
v_total: = v_total + v_sum;
DBMS_OUTPUT. Put_line (' week ' | v_week |': ' | v_sum);
END LOOP;
DBMS_OUTPUT. Put_line (' total sales reservations :'|| v_total);
END get_total_val;
END GET_TOTAL;
/
O/P
Week 01:40
Week
Week 03:40
Total sales reservations: 140
--------------------------------------------------------------------------------
Here, I'm moving the column name as dynamic value.
I modified the package as below...
CREATE OR REPLACE
PACKAGE BODY GET_TOTAL AS
CREATE OR REPLACE
PACKAGE GET_TOTAL AS
TYPE ref_cursor IS REF CURSOR;
Strarray ARRAY TYPE IS VARCHAR2 (100);
PROCEDURE get_week_total)
p_colName VARCHAR2,
p_refCursor to ref_cursor);
PROCEDURE get_total_val;
END GET_TOTAL;
/
CREATE OR REPLACE
PACKAGE BODY GET_TOTAL AS
PROCEDURE get_week_total)
p_colName IN VARCHAR2,
p_refCursor OUT ref_cursor) AS
v_query VARCHAR2 (4000);
BEGIN
v_query: = ' SELECT SUM (: p), week_num FROM week_tab GROUP BY week_num ORDER BY week_num';
P_refcursor OPEN FOR v_query
Using p_colName;
END get_week_total;
PROCEDURE get_total_val AS
v_refCursor ref_cursor;
v_sum NUMBER;
v_week NUMBER;
v_total NUMBER: = 0;
STRARRAY v_colName: = STRARRAY ('BKG1', 'BKG2');
BEGIN
I'm IN v_colName.FIRST... v_colName.Last LOOP
get_week_total (v_colName (i), v_refcursor);
LOOP
EXTRACTION v_refCursor
IN v_sum, v_week;
EXIT WHEN v_refcursor % NOTFOUND;
v_total: = v_total + v_sum;
DBMS_OUTPUT. Put_line (' week ' | v_week |': ' | v_sum);
END LOOP;
DBMS_OUTPUT. Put_line (' total sales reservations :'|| v_total);
END LOOP;
END get_total_val;
END GET_TOTAL; GET_TOTAL;
/
But I get this error message
ORA-01722: invalid number
ORA-06512: at "SCOTT. GET_TOTAL', line 29
ORA-06512: at line 2
Please let me know how this can be resolved... I'm trying to get the result as below
Week 01:40
Week
Week 03:40
Total sales reservations: 140
Week 1:150
Week 2:70
Week 03:50
Total sales reservations: 270Variable bind bind values of the object, not the object names. You cannot use bind variable as column name. Change:
v_query := 'SELECT SUM (:p), week_num FROM week_tab GROUP BY week_num ORDER BY week_num';
TO
v_query := 'SELECT SUM (' || p_colName || '), week_num FROM week_tab GROUP BY week_num ORDER BY week_num';
and
OPEN p_refcursor FOR v_query USING p_colName;
TO
OPEN p_refcursor FOR v_query;
SY.
-
Actions panel, moving with open script tabs/worksheets
Hello
I would like to ask if its possible to move the order of the open scripts. In most programs, you can change the order of tabs/sheets, but in DIAdem, the sort is done by order of opening and closing documents. Its really annoing so I want to reorganize the files, I need to close all the and drag them into the new order. will you add this feature in future versions?
Thank you
Doubek
Hi Lukas.
Thank you for adding this request to DIAdem idea exchange. There is no feature to do this in DIAdem-SCRIPT from 2015 tiara.
Brad Turpin
Tiara Product Support Engineer
National Instruments
-
Problem with adapter FTP while creating dynamic values.
Hi all
I tried passing dynamic values to the FTP adapter, but is throwing the error indicating that the file is already exists in the target directory. It shows the old name of file instead of the new file name. While setting up the FTP adapter initially, I gave a name of file and for each transaction, he resumed the same instead of dynamic file name file name.
This is the code in the jca FTP file.
***********************************************************************************************************************
< name of the adapter-config = adapter "Read-WriteFTP" = "FTP adapter" wsdlLocation = "Read_WriteFTP.wsdl" xmlns = "http://platform.integration.oracle/blocks/adapter/fw/metadata" > "
< connection-factory location = "ist/ftp/FTPGrailService" / >
< endpoint-interaction portType = operation "SynchRead_ptt" = "SynchRead" >
< className = "oracle.tip.adapter.ftp.outbound.FTPIoInteractionSpec interaction-spec" >
< property name = "SourcePhysicalDirectory" value = "/ abc/def/GHI/jklmn/opqrst/XYZ" / >
< property name = "SourceFileName" value = "abcdef.csv" / >
< property name = "TargetPhysicalDirectory" value = "/ home/abcde/OracleUser345" / >
< property name = "TargetFileName" value = "abcdef.csv" / >
< property name = "TargetIsRemote" value = "false" / >
< property name = value 'Type' = 'COPY' / >
< property name = "File Type" value = "ascii" / >
< / interaction-spec >
< / interaction of endpoint >
< / adapter-config >
**************************************************************************************************************************
Code inside the BPEL for dynamic values is
**************************************************************************************************************************
< bpelx:inputProperty name = "jca.ftp.SourcePhysicalDirectory" variable = "FilePath" / > "
< bpelx:inputProperty name = "jca.ftp.SourceFileName" variable = "FileName" / > "
< bpelx:inputProperty name = "jca.ftp.TargetPhysicalDirectory" variable = "Variable1" / > "
< bpelx:inputProperty name = "jca.ftp.TargetFileName" variable = "FileName" / > "
**************************************************************************************************************************
Thank youTry...
Even if it is the FTP, it stills appear to focus on the jca.file properties...
See you soon,.
Vlad -
What is the open script? is a language?
Hello
What is the open script? is a language?
Published by: 799636 on October 5, 2010 07:13OpenScript is a new (ish) product that allows you to record the scripts used for functional tests / load. The scripting language is Java and is presented in a version of the Eclipse IDE. See http://www.oracle.com/technetwork/oem/app-test/etest-101273.html for more information.
Wayne
-
Can a pop list cause a dynamic value assigned to him?
Can a pop list cause a dynamic value assigned to him?
as Select actualValue, fullname of the category;
and put fullname in the list of values in the list of POPs and actualValue each of the returned values.The following code will help you and set the trigger a times-new-form-instance.
DECLARE rg_name VARCHAR2(40) := 'EMP'; rg_id RecordGroup; errcode NUMBER; BEGIN rg_id := Find_Group( rg_name ); IF not Id_Null(rg_id) THEN delete_group(rg_id); END IF; rg_id := Create_Group_from_query(RG_NAME, 'SELECT ename, TO_cHAR(empno) FROM emp'); errcode := Populate_Group( rg_id ); -- Error occured while populating the record group if errcode != 0 then message(' Error occured while populating the record group'); raise form_trigger_failure; end if; -- Clearing the list before populating it. clear_list('here you define block column name'); populate_list('here you define block column name',RG_ID); exception when no_data_found then null; when others then null; END;
-
Hello
I have a doubt about the iteration in open script. Suppose my script contains 300 lines. I want to go through the script of the 5th line 200 ' for 10 times because it contains a drop down menu.instead to the acripts iteration all (300 lines) for 10 times, how can I browse only 200' 5th line (but I want to run the script once, inside I want to browse 200' 5th line for 10 times), please help me
SandeepYou can add the loop for
Make a right click on the stage-> Add-> other-> control statements-> to, and then add the account number.
However, you should always modify the code.
The syntax used in OpenScript is really easy to read, I would try to dig a little in the code you see is easy a pleasure to learn.
Not hesitate to ask questions about Java here.
Concerning
Alex
-
Task Scheduler works with scripts created in open Script?
I am to evaluate whether the Script Open eTester 8.2 is needed. One consideration is that we use the Task Scheduler and it does not seem to recognize all of the scripts that I have recorded in open Script. I use Task Scheduler that comes with the download of the v9. I understand that I could use the new etester which is included with the v9 but I heard that product may disappear in the future and this open Script is his replacement. Rumor?
Thanks for any help,
JeffHello
OFT installer contains the Task Scheduler and task scheduler does not come only as far as I know. When you try to perform a custom installation of the OATMEAL package wouldn't see you Task Scheduler as a separate entity. If this works with the OFT or etester.
You can use the Oracle Test Manager to run and schedule jobs to open script.
Thank you
Published by: Openscript user 100 on November 17, 2009 20:47
-
Generation of a dynamic value through pl/sql in shell.
Hi all
Generation of a dynamic value through pl/sql in shell.
host_command ("echo" Insert into CUSTOM (FIRSTNAME) VALUES ("| v_temp |");) « ») ;
Output current:
Insert into CUSTOMERS (FIRSTNAME) VALUES (John);
power required:
Insert into CUSTOMERS (FIRSTNAME) VALUES ('John');
Thank you.Your request must so->
host_command ('echo " Insert into CUSTOM (FIRSTNAME) VALUES ('||chr(39)||v_temp||chr(39)||');" ');
Kind regards.
LOULOU.
-
E-mail automatic script (dynamic wrapper)
Hey everybody,
I'm running workflow 'To move Virtual Machine disk' and would like that so he can generate a simple email indicating what VM and what data store, the new discs live in. The enlarged and in bold text is what I had added to the original screenplay 'send Notification '. I would like an email from own research without the stuff 'Dynamic Wraper' and Instance.
Here is my script 'Send Email':
var message = new EmailMessage();
Replace the defaults if and only if the input parameter is defined
If (smtpHost! = null & & smtpHost.length > 0) {}
message.smtpHost = smtpHost;
}
If (smtpPort! = null & & smtpPort > 0) {}
message.smtpPort = smtpPort;
}
If (username! = null & & username.length > 0) {}
message.username = username;
}
If (password! = null & & password.length > 0) {}
message.password = password;
}
If (fromName! = null & & fromName.length > 0) {}
message.fromName = fromName;
}
If (fromAddress! = null & & fromAddress.length > 0) {}
message.fromAddress = fromAddress;
}
message.toAddress = tosolve;
message. Subject = subject;
message.addMimePart ("Virtual Machine:" + vm + "moved to disk:" "+ datastore, ' text/html;") Charset = UTF-8 ");"
System.log ("sending mail to host:" + message.smtpHost + ":" + message.smtpPort + "with user:" + message.username)
+ ", to:" + message.fromAddress + ", to:" + message.toAddress);
message.sendMessage ();
And here is the email that I get:
VM: DynamicWrapper (Instance): [VcVirtualMachine]-[class com.vmware.vmo.plugin.vi4.model.VimVirtualMachine] - VALUE: disc VirtualMachine 'Test VM' Relocated to: DynamicWrapper (Instance): [VcDatastore]-[class com.vmware.vmo.plugin.vi4.model.VimDatastore] - VALUE: data store "Windows_Lab".
Use vm.name and datastore.name. Also for simple text formatting, you can use methods on the string. So if you want the vm.name in "BOLD" and a font of 16 points you might say:
VM. Name.Bold (.fontsize). (« 16 ») ;
You can google the full list of options for javascript. You can also simply include the markup in the chain, as you did above.
-
UI Scripting - attribute value
Is it possible to get an attribute value when UI scripting?
Using accessibility Inspector, I see an accessibilityVisibleRows attribute in an AXOutline element, but I don't know how to get their hands on it.
As a first step, try statements like those below, one at a time:
say application "System events".
say process of 'Finder '.
attributes of Diagram 1 of ...
the attributes name 1 of ... outline
the attributes value contour 1 of ...
value of attribute [attribute name] 1 of ... outline
end say
end say
-
[Front Panel Window->; Open] Scripting VI property is not listed.
Hi all
I try VI Scripting for the first time. In example VI (new creation VI of Scratch.vi), I can see the property that the window-> open front panel is used. When I tried on my own in a new VI, is not this property is displayed.
FYI: I activated VI script options in my LabVIEW and I use LV2012.
Thank you
Ajay.
It is a method, not a property. Before Panel.Open property has been deprecated.
-
Cannot open vi dynamically when it contains tcp controls
The idea is that if I had a framework for data collection. The thing is that I don't know beforehand how data are collected. That's why a vi opens dynamically to recover these data.
When I use udp control in this vi recover data over a network, everything works fine. However, when I use tcp controls I get error 1003: "the VI is not executable. The error appears in the control of 'Reference VI open'.
I don't see why this should be a problem.
In this case, "Default path" returns the folder where is my program.
In any case, I found a solution. The problem lies inside the Subvi 'Listen.vi TCP'. I went there for the controls 'Create listening TCP port' and "Wait for the TCP listening port" and now everything works fine.
-
Previously, work job FTP in the batch file gives message "error opening script file.
I have two FTP jobs on two separate machines that I've been running as tasks scheduled for a few years with success. They are on the same network, but we're on the field, the other is out of the field. Both are Windows XP SP3.
Starting this week, two of them fail when you try to load the actual script FTP file. Here is an example of the ftp command that I use: FTP d - n-i-s:C:\scripts\getmyfiles.txt
The message says "Error opening C:\scripts\getmyfiles.txt" and displays help FTP. I should also mention that the FTP seems to work fine if I connect from the command prompt, and does not use a script file manually.
Both of these batch files containing similar (different but calling script files) FTP commands were executed the week last successfully.
Any suggestions are appreciated!
Hi Kristin,
The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.
http://social.msdn.Microsoft.com/forums/en/categories/
Hope the helps of information.
Maybe you are looking for
-
Family sharing prevents Sync music?
I just started the sharing of family and I can are no longer synchronized songs (not downloaded via iTunes) to my iMac to my iPhone. The best recommendation I found on Apple's site has been to use home sharing. HomeShare provide a real sync on my ph
-
I use elitegroup mother board 661GX-M2 (V5.0) with bios 63-0100-001131-00101111-092906-SIS661XX FRIEND I search many high grade my bios to enable HT for my new processor but I might not succeeded even elite web group has no bios update can you help m
-
I don't know what to do with this?I searched but seem to come with an XP service pack 2 fixed?Should I just stay with my USB mouse?
-
"There is no connection available server to process your logon request.
We just got a new laptop with Windows Vista, and we want to separate user accounts for the family. I had to download the software just to add another user, but whenever we try to log on to the other account, it said "there is currently no available c