Opening and software update is not possible

Similar Questions

• AT300 unrecognized external power - system update is not possible

  I have an AT300 bought in the United States, but I live in Germany. I bought a Kensington absolute Power Dual USB wall adapter with 2. 1 is to connect the USB charging cable to charge the tablet that works very well. Now, the Toshiba Service Station concludes a update for the Tablet system however, an update is not possible because the update process think that a charging cable is not attached, even it is. Why the Tablet does not recognize the connected charger cable? How can I do a system update? What is the difference between the wall adapter to the United States and the Europe Kensington adapter?

  My guess would be that Toshiba has put a few resistors-ID in the data line in the standard charger so you can identify it.
  Here is an article on Apple doing: [epanorama | http://www.epanorama.net/blog/2010/08/18/apple-charger-secrets/]

• My Windows Update not more? My software update did not work for months?

  My Windows Update is not more?  My software update did not work for months ?

  Hi Jacc,

  1. What is the question you are faced with Windows updates?

  2. you get any error message?

  3. you are facing problems during updates or install updates?

  4. what software update you speak?

  5 have had any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997/en-us

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• HP Software Update could not process your request (HPSU-2024)

  Hello

  Just re-installed all the features of our all-in-one OfficeJet 4215xi (Photo smart Suite) & tried to check the updates, but get the following msg:

  HP Software Update was not able to process your request at this time. Please try again later. (HPSU-2024)

  Disabled the anti-virus & firewall without help.  Dell Inspiron B120 running Windows XP Home Edition.

  Any ideas?

  I installed the software that came on a disk with the printer (rather than downloaded later) & now get this msg:

  The computer that this program communicates with updated information is currently unavailable.

  The printer & suite work fine, I am not concerned about obtaining updates.  Close this thread if possible.

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• Verification of drivers and software updates via tune

  I have a HP 2000-350 (US) Notebook PC that is out of warranty. (Product no. QE279UA #ABA, Serial #[edited by Moderator serial number})

  My problem is I went to the driver and software updates and scan from HP for updates and it did not work. After clicking on the link to verify the driver and software updates, it started working and then stopped. I don't have any comment. When I clicked on the button 'show solutions' I have nothing.

  In particular, I looked for any update of the bios and see if all the drivers needed to be changed.

  Went to HP support and of course got the "no ransom" story "no support" even if I had problems with their support driver free.

  Any ideas on what is the problem? Solution?

  Thank you

  Sorry to say the Scan function still does not work. Best option is to choose your operating system using the selector drop-down list and manually check the drivers/software list.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5169419

• Photoshop CS6 update is not possible

  I use Photoshop CS6, Version 13.0 x 64, extended. My system is Windows 7.

  When I try to update from the show, I get the error message that an update is not possible and that I should install Adobe Application Manager. When I try, I get the error message depending on whether I should install Adobe Support Advisior. That Proramm is no longer supported.

  Then I load the files to update from the Adobe website. After having unpacked the file, I started the AdobePatchInstaller.exe. The following error message is the same as at the beginning.

  I did a new install of Adobe CS6 and installed in a folder named Adobe Photoshop CS6.

  No idea what else I can do to get the latest version of CS6?

  Hello

  Please refer to the link given for cause of update: troubleshooting problems update | CS5, CS5.5, CS6

  It will be useful.

  Concerning

  Bianka Attre

• How can I search all subjects in my guide? and if this is not possible, how do I get books have not not subjects with the same name?

  How can I search all subjects in my guide? and if this is not possible, how do I get books have not not subjects with the same name?

  "People need be able to find these without having to look inside each book TOC.

  Sorry, but I'm not a big fan or user of this sensitive arrangement "New kid on the block. Therefore, it may be that I am simply misunderstanding because I do not regularly use it. Of what you say, it seems to me that if you (or more precisely your users) are not able to click on the right side, where he says 'Getting Started' or 'List of Email Campaign' and see these topics open and view the content with search terms highlighted?

  Regarding the "bookmarks", those that are normally visible by the user and will be not viewable unless the name of the bookmark appears also as text within the topic. Although, if the two are different, you could probably get there by adding the name of the bookmark as a keyword search in the properties of the section.

  

  In any case, I feel that at this point, I can just be frustrating you and you may need someone else to try to help that probably better understand the issue.

  Sorry, I was not able to help.

  See you soon... Rick

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• 'Software update' has not worked for a while?

  'Software update' has not worked for a while? Also 'DEFENDER' lights not...

  Duplicate of http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/software-upate-will-not-work-for-me-for-quite-some/d0c0277d-59ae-4756-8b03-c16164c596e6 (November 19, 2012)

• Cannot access PC settings, Apps installs not opening and closing, updates

  So... i started with a connection internet dropout. No matter how many times I've selected automatically connects it kept being changed. Used scans etc, found nothing. The problem then grew a slower connection and browser. I use IE and Opera. Opera is my default. A few days later I can't open all the apps without them immediately close it before they were properly open. I can't access PC to change the settings. I tried various solutions of MS and other Malware software. Both have had some effect, but not resolved the issue. I can now open apps, limited reach 95% of the installation of an update of windows instead of 0%, have the automatic internet connection... still have slow service, part 3 and MS preinstalled apps cannot be opened and no access to notebook settings.

  Somewhere along the way 20 + new apps appeared, all administrative tools.

  MBAM logs: -.

  Malwarebytes Anti-Malware
  www.Malwarebytes.org

  Update, 12/02/2014-17:33:05, SYSTEM, LAPTOP, manual, database Rootkit, 2014.9.18.1, 2014.12.2.2,.
  Update, 12/02/2014-17:34:11, SYSTEM, LAPTOP, manual, database of malware, 2014.9.19.5, 2014.12.2.6,.
  Scan, 12/02/2014-18:17:37, SYSTEM, LAPTOP, manual, departure: 02/12/2014 17:35:30, duration: 41 min 42sec, analysis of the threat, full, 4 detection of malicious programs, 0 Non-Malware detections.
  Error, 12/02/2014 18:21:23, SYSTEM, LAPTOP, manual, 0,.
  Update, 12/02/2014-18:21:23, SYSTEM, computer LAPTOP, manual, program, failure, impossible to the server to update access, 2.0.3.1025, 2.0.4.1028,
  Update, 12/02/2014-18:22:49, SYSTEM, LAPTOP, manual, database of malware, 2014.12.2.6, 2014.12.2.7,.
  Update, 12/02/2014-18:26:01, SYSTEM, LAPTOP, manual, program, 2.0.3.1025, 2.0.4.1028,.
  Update, 12/02/2014-18:30:33, SYSTEM, LAPTOP, manual, database Rootkit, 2014.11.18.1, 2014.12.2.2,.
  Update, 12/02/2014-18:31:22, SYSTEM, LAPTOP, manual, database of malware, 2014.11.20.6, 2014.12.2.7,.
  Scan, 12/02/2014 19:13:09, SYSTEM, LAPTOP, manual, departure: 02/12/2014 18:32:31, duration: 40 min 37 s, threat, finished, 0 detection of malware analysis, 0 Non-Malware detections.
  Update, 12/02/2014-21:07:15, SYSTEM, LAPTOP, manual, database of malware, 2014.12.2.7, 2014.12.2.9,.

  (end)

  I used the MBAM to scan, I had already installed but it wouldn't run as something he would stop. After it has been reinstalled I struggled to get the software and database updated but eventually got a clear at all after these items have been quarantined:

  Malwarebytes Anti-Malware
  www.Malwarebytes.org

  Scan Date: 12/02/2014
  Acquisition time: 17:35:30
  Log file:
  Administrator: Yes

  Version: 2.00.3.1025
  Database of malware: v2014.12.02.06
  Rootkit Database: v2014.12.02.02
  License: free
  Malware protection: disabled
  Protection from malicious Web site: disabled
  Self-protection: enabled

  OS: Windows 8.1
  CPU: x 64
  File system: NTFS
  User: Melanie

  Type of analysis: threat analysis
  Result: completed
  Objects scanned: 324908
  Elapsed time: 41 min 42 s

  Memory: enabled
  Start: enabled
  File system: enabled
  Archives: enabled
  Rootkits: enabled
  Heuristic: enabled
  PUPPY: enabled
  PUM: enabled

  Process: 0
  (No malicious items detected)

  Modules: 0
  (No malicious items detected)

  Registry keys: 4
  Security.Hijack, HKLM\SOFTWARE\MICROSOFT\WINDOWS NT\CURRENTVERSION\IMAGE FILE EXECUTION OPTIONS\AUpdate.exe, quarantine, [b757d985d9a374c2326240c0897b4ab6],
  Security.Hijack, HKLM\SOFTWARE\MICROSOFT\WINDOWS NT\CURRENTVERSION\IMAGE FILE EXECUTION OPTIONS\AutoUpdate.exe, quarantine, [e12ddb83ff7d95a1faa79c6462a2d828],
  Security.Hijack, HKLM\SOFTWARE\WOW6432NODE\MICROSOFT\WINDOWS NT\CURRENTVERSION\IMAGE FILE EXECUTION OPTIONS\AUpdate.exe, quarantined, [1df1f36ba9d3c76f98fc689842c204fc],
  Security.Hijack, HKLM\SOFTWARE\WOW6432NODE\MICROSOFT\WINDOWS NT\CURRENTVERSION\IMAGE FILE EXECUTION OPTIONS\AutoUpdate.exe, quarantine, [d539342a9fdda294e3bea85860a40000],

  Registry values: 0
  (No malicious items detected)

  Registry data: 0
  (No malicious items detected)

  Files: 0
  (No malicious items detected)

  Files: 0
  (No malicious items detected)

  The physical sectors: 0
  (No malicious items detected)

  (end)

  I ran windows Defender before all this and it has detected 6 items in class but when the scan finished, he says that he has none!

  Have no idea what to do next.

  Hi Meli,

  Thanks again for the update.

  I am pleased that you have managed to solve all the problems.

  I really appreciate your efforts.

  Please do not hesitate to answer, if you have other problems with Windows.

  Thank you

• Fingerprints of software updates is NOT up-to-date and does not work with Firefox 2.0.0.1

  Software version: Protector Suite QL v5.4 build 2668
  Firefox 2.0.0.1

  Symptom: now that Firefox 2.0.0.1 is installed, PS - QL fails to install correctly even if it is said that it has been correctly installed.

  Symptom: Every 20 seconds a new message pops up saying (approx.): ' FF is detected, you want to install although it is not tested, it should work! By clicking YES or NOT gives the same result - it is stuck in a loop. The pop - ups keep occurring even when FF or IE are not running. VERY irritating!

  Temporary solution:
  (1) I've disabled PS - QL (killed process)
  (2) I contacted UPEK, software is. They replied:
  "We have released new version of Protector Suite software. The latest version is 5.6, which supports Windows Vista, IE7, FF2 and much more. Please check the download pages for Toshiba and upgrade to a newer version. »
  (3) I went to the site above and Toshiba does NOT HAVE does the update available! UPEK replied as follows:
  "I can see our internal system, that Toshiba has already downloaded the latest version. Now it's finally upward to Toshiba, if and when he died. I don't know the reasons why it is not available for public download, this is the final version (not beta). It is a customized version and Toshiba only can distribute. Please contact Toshiba support.

  Toshiba updates did not worth to free them!

  And where is the support from Toshiba? There is no email - only this self-help forum.

  Hi Roger

  Sorry, but I think you're a little frustrated and you obviously don t understand what real problem there is. Do not be frustrated. All, to an explanation or a solution even.

  First of all if you need assistance, you can call Toshiba hotline in your country and try to learn more about your problem. For each European country, Toshiba has a web page where you can find information on phone numbers and info how to contact Toshiba. Unfortunately, it is not the same for each country and if you go to http://uk.computers.toshiba-europe.com the site of the left hand you will find the hotline number. Call them and explain what you want to know. I hope that you will be able to contact the right person.

  Back to the question of the utility! It is logical that the producer of software is most often one step as a producer for laptop and before the tool is provided for download, it must be tested. It seems that the software producer has new version that is created for Windows Vista, IE7 and FF2.0. As you know that Windows Vista is not officially released and thereby there is no new version of Vista available on the Toshiba download page. I'm 100% sure after Vista start new version will be available for download. You will see that the new laptop Vista pre-installed will have this new version.

  As far as I know official Vista launch term is end of January.

  By the way: it will be interesting to know what model of laptop and preinstalled OS you are using.

• The Apple software update will not install updates

  Each time the Apple software application to be updated by Apple Software Update, the error in the picture below opens and I get it over with to have to do a manual reinstall.  Here, the image shows the most recent upgrade to iCloud and iTunes, but I also got QuickTime are doing the same thing.  It would seem that each manual installation to reinstall a new copy of the GSS, but he keeps having the same problems. Please help diagnose this problem.  The "Download only" option in the window pop up works, but it would be nice for ASU than him.

  An update of the software is pretty useless if it is not updated of software.

  

  I suspect that all is not well with your copy of the GSS. You can try to fix it, but I suspect a complete tear down and reinstallation of any software Apple will be needed.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• The Apple software update does not work on my windows PC 10.

  Im trying to update itunes to the latest version, however when I run the update, it comes back with an error message saying: Apple update servers are unavailable, check your internet connection. I checked the wifi and make sure it is connected and checked my firewall (kaspersky) and it shows the program is allowed. However, I am still having this problem, which is a problem for a few weeks now. Help, please?

  Open Control Panel > network and sharing > Internet Options > advanced > Security and uncheck the "do not save encrypted on disk pages", then try again.

  For more tips, see troubleshooting problems with iTunes for updates of Windows .

  TT2

• BIOS update is not possible for Portege M700

  I tried to update the BIOS to my M700-110 PPM70E-02302DEN from 1.60 to 1.80 (P005Bv180.exe).

  However, it fails with the error "the BIOS update is not taken in charge of operating system. No support for operating system or service pack installed. »

  In the "more information", I have read "OS independent.
  This is the Windows 7 Home Premium with Service Pack 1 unsupported?

  What is the problem?
  What BIOS is right for my system?

  Please help me!
  Thank you very much.

  Hello

  It seems that the OS Vista was preinstalled on this laptop.
  This means that you have installed the Windows 7 system to your own hand.

  The point is that BIOS update requires a few essential tools of Toshiba.
  For example, the package of value added is an important software package and must be preinstalled on the laptop.

  VAP is installed?
  If this isn't the case, install the PPV before trying to update the BIOS.