opening ports 2077 and 2078 to use web disk

Similar Questions

• To set up my drive Web told me to "make sure that Ports 2077 and 2078 are not protected by a firewall... How can I find this information and if a firewall, how do I change or correct 2077 and 2078.

  I'm trying to implement a web disk with Hostgator for my blogs and the problem seems to be on my end, not theirs.  If I have a firewall port problem which prevents me from using my drive so what other options can I?.  Also what are the Ports 2077 and 2078 on my firewall.  How can I fix the problem?  Should I switch the disk and just use my desktop computer?   I wanted to keep the Hostgator on the disk. Also, I have the same problem if I jump the disc.  My 'add a network' don't like what I'm doing!

  Your message isn't clear when you refer to "floppy disk".

  In general, a firewall is designed to avoid that other computers access to your computer - unless you want that to happen.  You can add an 'exception' to the firewall that allows the software installed on your computer to communicate through the firewall, or you can open 'holes' (aka port) in the firewall that remain open regardless of whether an application on your computer is actively using them.  The latter is obviously a bit more risky.

  How to configure these exceptions depends on which firewall you use.  If you have Windows XP service pack 3 and you are using Windows Firewall, see http://windows.microsoft.com/en-US/windows-vista/Open-a-port-in-Windows-Firewall (well that article is on Vista, it applies as well to the firewall of Windows XP sp3, except instead of step 2, just click the 'Exceptions' tab - and don't forget to uncheck the box in the "General" tab that says "don't allow exceptions").

• I can't install a webdisk on vista home 32-bit top of the system. I allowed the site through the firewall with ports 2077 and 2078.

  I have a website www.rsdworld.com. I tried to establish a webdisk or connecton on the network's website. I get an error asking that I ensure ports are allowed through the firewall or the folder cannot be created. This becomes agrivating. I had no problem installing a webdisk on my XP.

  Hello canmandom,

  You will need to check with Webdisk to see if it is compatible with Windows Vista.
  Check the system requirements.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to open a pdf and read/print using Microsoft Works file?

  Error message: Works cannot open "C:\Users\Desktop\Zeke's Menu.pdf.  The file may be in use by another application, the file format is not supported by any of the installed converters or the file may be corrupt.

  How to open this file and read/print using Microsoft Works or Notepad or something else?

  You can't with these programs - (there is no same Modules for these programs) - you need another program.  You must download the free Acrobat Reader http://www.adobe.com/products/reader/ allowing you to read and print PDF files (but you will not be able to edit/modify them with this program).

  To edit/change you need another program like free PDF Editor: http://www.freedownloadscenter.com/Business/MS_Office_Add-ins/Free_PDF_Editor.html.  You can also download the free OpenOffice Suite 3.2 http://www.openoffice.org/ which is capable to download and work with PDF files (via the writer program).  The good thing about OpenOffice is that you can then save the file in another format which CAN be read and used by Microsoft Works or Notepad (even though it may look very different without the features of PDF).  OpenOffice is very similar to Microsoft Office and most of the people who do not want to pay for Microsoft Office get OpenOffice instead because it is by far the best alternative (and some say that it is even better - although I don't agree with that).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• RV042 open ports 80 and 443 to Shields UP! When using QuickVPN

  Is it possible to use QuickVPN with the RV042 without leaving ports 80 and 443 open to Shields UP great! scans?  As a solution, I'm pass these ports to a non-existent IP address and forcing QuickVPN to use 60443 port.  Yes, 60443 watch also opened too if I scan it, but at least it is not in the ports first 1056.

  Any help much appreciated.

  Router Linksys brand is using the latest firmware for this material (1.3.13.02 - tm)

  Tim,

  As shields up is a very good tool to run inside your network to get an idea on what ports are open. It is best to run the scan of a computer that is not behind your network. I use nmap http://nmap.org/ and scan my network from the outside to get a better idea on which ports will show open. Since Shields up is running on your computer, it will display the results based on your computers as firewall. Yes Qvpn requires 443 or 60443 to be tuned by the router to establish a connection.

  Thank you

  Jasbryan

• open ports 80 and 443, is my PC security?

  Port number	Description	Keyword
  80/TCP	World Wide Web HTTP	http
  443/TCP	http over TLS/SSL protocol	HTTPS

  After trying firewall, I find 2 numbers of open ports, is my PC securitied?

  Thanks in advance for your suggestions

  Yes, like the said keyword, port 80 is http, for to go you, so if it wasn't open, you wouldn't be able to browse the web Web sites. Look at the URL of this page,

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/open-80-and-443-ports-is-my-PC-securited/a1b2c95c-f8e3-4151-864f-4fffeb2b7c0c?page=1&TM=1316136754158#footer

  Notice the http at the beginning?

  And port 443 is the same as 80, but it is a secure version, for all sites where security is a problem, for example when connected to hotmail, Bank, paypal or many other sites where you sign in.

• configuration of the Windows 7 of 2077 and 2078 ports firewall

  It's asked of me, so I can start using my web generator on my Toshiba laptop.  What should I do to have these ports 'configured' by AVG 2013?

  If you try to open one or more ports on AVG 2013, you may be better of demand them on their forum - http://forums.avg.com/ww-en/avg-forums?sec=theme&act=show&id=277 probably in the section 'Internet and network '.

  Example of a post on the AVG forum:

  Please follow the steps mentioned below to allow a specific to the AVG Firewall 2013 component port.

  1. open the AVG program and press F7.
  2. click on the Expert mode button, and then select system services.
  3. click on the button manage system user rules.
  4. click on Add.
  5. now, you can allow the necessary ports and other details.
  6. save the new rule system by clicking on the OK button.

  Thank you.

• How can I keep the 2077 and 2078 ports to be blocked in the firewall?

  I turnrd firewall, but I always get a message that 2077and 2078 ports are blocked.

  How can I make sure that they aren't blocked?

  Hi Dallas L. Woods,.

  See the following article:

  http://support.Microsoft.com/kb/308127

  I hope this helps!

• How to open files .ogg and .mogg for use with the mixer?

  I have a number of files multitrack .ogg which I would like to open and remix in Audition, but I can't seem to understand how to use them with the mixer. What I am doing wrong?

  If I open them normally, the mixer is not available.

  

  

  If I insert into a multitrack session, all find themselves on the same channel.

  

  For you, the answer is deliciously simple. What you have here is a multichannel file and hearing will always handle so if you open it in form of wave or multitrack view. What you have to do is open in waveform mode, and then go to edit > extract channels to mono files, and he will separate your file into mono files 10 (in this case), you can place on individual tracks in multitrack view. You will be asked at some point to save these, though course.

  In situations like this, it's pretty simple. In addition (for example by sending four channels of a plugin that will only to return two channels) it does not work anywhere near as well. But for you, it should be good, I think.

• I was used to typing the 1or2 first letters of a Web site I had been to avant-une list appears - I would choose the one I wanted. Very easy. Recently, it stopped and I often used Web sites addresses have disappeared. Any help please.

  Firefox 4.0.1 for example I type w in the address bar, and my most frequently used sites have been listed.

  Make sure that the address bar is not set to "Nothing":

  • Firefox (Tools) > Options > privacy > address bar: when you use the location bar, suggest: history, bookmarks and bookmarks

• can someone tell me how to open port 8090, 8091 and 8092

  I have windows vista Home premium with norton 360 and a motorola sbg900 cable modem

  Hi kazt279,

  Thank you for writing to Microsoft answers Community Forums.

  This port is a somewhat less popular to port 80 to offer alternative to web services. (The most popular alternative port is 8080). Like the 8080, its use in a URL requires explicit "default port override" requires a web browser to connect to port 8080 instead of port 80 by default http.

  Its current use and its importance today is due to contiguity to the World Wide Web port80 is super-popular "http". Sometimes a webserver "off the beaten path' will be established to not listen to port 80, but other related port 81, 82, 8080 or 8090. (Associates of proximity or appearance). If port 81 is remarkable today because it is a neighbouring port 80 and is sometimes used as a complement or alternative, in the same way.

  However, as we explained in our page for port 80, port 80 is the port of 'default' for the http web Protocol. How, then, if you want to use a different 'port' 81 or 8090, substitute us this value by default to specify port we want?

  http://www.domain.com:81 /.

  If we want to replace the default service port that is implied by the Protocol (http), we put a colon (:)) after party of domain name followed by the port, we want to use. The URL above would cause the browser replace its normal use of port 80 for http and instead try to connect to a server that listens to "www.domain.com" for connections on port 81.

  If you ever see a URL using this format, with a number after a colon after the field of the URL, you'll know that this URL is asking the browser to connect to a server who listens to incoming connections on the specified rather than the default port.

  Since you give exceptions to these ports in the windows firewall or any other firewall of the 3 part, they're not monitored which means that they are susceptible to hackers. I would say activating only not the ports unless it is very important. If you enable them to, of course, you do not keep the important information on this computer.

  I hope this helps.

  Let us know if this doesn't work or if you need further assistance.

  Kind regards

  Sharath

  Microsoft Answers Support Engineer

• WRTG54G does not open ports

  Hello

  I have a problem recently.

  I used to host the games and an FTP server, and for that, I need to open some ports. He used to work all the time, but recently people couldn't connect to me more.

  I tested a few things online (open port scanners) and it seems that all my ports are closed.

  It used to work fine, but now is no more. I wouldn't change anything. What could be the problem here?

  Thanks, Neil

  I set my router on factory settings, reset the modem, DHCP renewal and all, finally it works!

  Thanks for the effort though

• Cisco series C - Open Ports TCP 4043 & 4044

  Anyone can respond to what these ports do on C-Series codecs?

  They are generally used for the nearby identity resolution protocol and Protocol location tracking and known to be used by malicious software. Are they used for these protocols, can they be closed without loss of functionality. I have a client who has many systems placed on public networks and they wonder if this can be / should be done

  I looked in the paper without finding the answer:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_IP_Port_Usage_for_Firewall_Traversal_Deployment_Guide_X7-2.PDF

  Any ideas?

  MW

  How are Mattias Hei, you?

  The firewall vcs guide here helps you.

  If I see just the tcp ports 4043 and 4044 are used for business communication (cisco contact 8) & upgrades.

  If no malware :-)

  You can be sure that you can close it from external networks. An intouch would most likely be

  plugged into the secondary port or the LAN in all cases.

  I do it vice versa, all close and open just need ssh and http (s) of networks including access management

  and allow only necessary media ports and signage from the outside.

  You will find that the media ports used TC5.1 ports in the Administrator's guide

  Value space:
  
      Dynamic: The system will allocate which ports to use when opening a TCP connection. The reason for doing this is to avoid using the same ports for subsequent calls, as some firewalls consider this as a sign of attack. When Dynamic is selected, the H.323 ports used are from 11000 to 20999. Once 20999 is reached they restart again at 11000. For RTP and RTCP media data, the system is using UDP ports in the range 2326 to 2487. Each media channel
  
      is using two adjacent ports, ie 2330 and 2331 for RTP and RTCP respectively. The ports are automatically selected by the system within the given range. Firewall administrators should not try to deduce which ports are used when, as the allocation schema within the mentioned range may change without any further notice.
  
      Static: When set to Static the ports are given within a static predefined range [5555-6555].
  
      

• How can I open my Windows 7 just to use FTP firewall?

  Phew! Just to get into these forums and ask a question was an effort!

  In any case, it is a question about Windows 7 (whatever the level highest is professional, I think it is called).

  On my Mac, if I use FileZilla to connect to an FTP server (sFTP, not), it works fine.

  However, in Windows 7, if I use FileZilla to connect to the same server, when it gets to the point where it starts to list the remote directory I get an ECONNABORT error and disconnected.

  I noticed that if I turn off the Windows Firewall if it works and I can use FileZIlla very well.

  My question is, rather than to turn off any firewall, how can I make an exception for FTP, or just for FileZilla. I think that the ports 20 and 21 are used depending on whether the connection is active or passive.

  I have searched all over the Control Panel, but cannot find a place to make an exception definition - just a place to turn the firewall on or off entirely.

  Thank you

  Doug

  Hi Doug,.

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

• I use Acrobat DC and I'm unable to open a PDF file on a Web site. Whenever I click the link it says that my drive is not updated. I've updated the player several times now and it always used open. Other documents open on this Web site.

  I use Acrobat DC and I'm unable to open a PDF file on a Web site. Whenever I click the link it says that my drive is not updated. I've updated the player several times now and it always used open. Other documents open on this Web site. http://www.cic.gc.ca/english/pdf/kits/forms/IMM1344E.pdf

  Hi kimberlys49504344,

  It is an XFA file that is not detected by the PDF viewers in the web browser.

  Please right click on this link http://www.cic.gc.ca/english/pdf/kits/forms/IMM1344E.pdf & select ' Save As... ', now, to save the PDF file to your desktop & open with Adobe Reader.

  I'm sure that it will work as it worked on my end.

  Kind regards

  Nicos