Operating system problem? Unable to start same download...

Similar Questions

• No operating system not found of starting problems

  I understand that there are other threads covering this error message, however none with this particular set of circumstances.
  Reminder: My system came with an empty msata slot that I filled with a 240 gb intel 525. I did two great patricians, loading on Windows 7 and cloning the windows installation 8 factory to another. Bios supported configuration using inherited and put my ssd as the first drive in the boot order. and as if it was magical, I could duel boot 7 & 8.
  Question: when I pulled the factory 5400 RPM drive I haven't had the no OS found message. Representing a little less a perfect starting, I went into recovery and command prompt 'bootrec (FixMbr/FixBoot/RebuildBcd)' commands. All crossed very well and after the closure of the cmd prompt window that I was given the opportunity to stop and start Windows 7 ultimate to the recovery page. Convinced that he had worked I accepted this offer and was welcomed by no operating system found once again. Confused, I went back and did cmd invites new bootrec /ScanOs and again found two.

  What I forget?

  Thank you in advance for something useful.

  Please do not take into account. Incace anyone else have this problem, I had to use the BcdBoot commands to add files of Bcd for each partition on the disk msata.

• Two vista operating system installed, but only starts

  Hello

  I hope someone could help me to overcome this problem:

  My laptop with vista venus hm so high-end, as I bought it in Germany had German language. So I bought ultimate in English and do a new installation. I was very happy with it, but yesterday I tried to install the original hp vista to do the dual boot. As it was provided by Toshiba Recovery CD, it was put directly to install on the HARD disk. I knew that it will erase all data, if there is, to HDD1 and install the operating system and other programs (as it was put in the BIOS to boot from there), but previously I already installed the ultimate in disk HARD 2. I thought, the vista hp will be in 1 HDD and ultimate will be in 2 HDD so I can choose at the beginning that one to start.

  However, after the installation of vista hp it show at the beginning of any other OS and just start with vista hp without giving no possibility to choose which start first. I checked this ultimate is also there, but I can't start. Can anyone, please, help me? I'd appreciate any suggestion, information and help. Thank you

  Greetings
  Suraj

  Hello

  You can use the 'Vista Boot Pro' tool, which is a very good tool to manage the startup options if you have multiple operating systems installed.
  Just go here-> http://www.vistabootpro.org/
  and download the tool.

  With the help of this tool, you should be able to start the two OS´s on your machine.

  Welcome them

• charging on different operating systems problem

  Hello

  Since this is my first post, I'll say this first: I love my 4 GB Sansa Clip!

  I had a strange problem, however, and a quick look through the forums has not enlightened yet, although I apologize if it's already been processed somewhere I use my Clip in MSC mode exclusively (DPW was just too odd and flaky). To make it work fine on Windows XP, Mac OS X Tiger and Ubuntu Linux 9.04. Windows is on my main computer, and several months ago the Clip stopped being recognized. In fact, when I plugged into the computer, it come alive and say it is 'connected', but it would not charge and it would not appear as a device in Windows. So I tried it on my Mac mini, and it worked fine. So I used it on my Mac mini since then, but tonight, the same thing happened there: I plugged into it, he said 'connected', but not charged and could not climb. I'm so back to my Windows machine thinking maybe the moody aircraft was begging for some MS action tonight, but no luck. So I restarted in my distro Ubuntu (9.04 v and guess what?) Fortunately, it is charging as I type and he fitted immediately and allowed me to transfer files via.

  So, what gives? Why would it matter what operating system tries to mount? It is a complete mystery to me, and I wonder how long I could have before even Linux stops recognize it...

  Anyone else encounter this? Thanks in advance!

  I can't speak for your Mac problem, but sometimes the Windows can have a brainfart and corrupt the USB driver. Go in with the connected player Device Manager and look for a faulty device (indicated by a triangle-and-yellow exclamation icon) in the tree view of the devices Universal Serial Bus controllers section. Delete any you find, disconnect the drive and restart your PC. Once Windows has finished loading, reconnect the video and Windows should detect and reinstall the driver.

• Installation of operating system problem

  I installed windows 8 via a usb port... After it was installed, it took too much time then I restarted the system... But after that, nothing has worked... First, he showed that no operating system has been found... Then you are prompted to restart the system and reinstall windows... And it kept saying... If I remove the USB he invites me to restart and nothing else works... pressing f10 or shift + f10 is not even open the prompt... and if I insert the usb key I get the BOOTMGR missing... Press ctrl + alt + delete to restart... I tried evrything... f2, f12, f8 or f6... nothing happened... How to fix this... I can't even not the bios or Setup... even to the registry editor...

  Power the system down, it turns the power off and wait 10 to 20 minutes.

  Plug it in again after 20 minutes and start the thumb drive and make a custom installation:

  Boot from the Windows 8 USB key
  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 8 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Installation of Windows 8 as a guest operating system problem

  Hello

  On my machine with Windows 7 (64-bit) Ultimate, I run the VMWare Player 5. I have many guests of computer virtual with Windows XP, Windows 7, Windows Server 2008, and they are all working well.

  Now, I tried to install the free trial of Windows 8 (64-bit). I downloaded it as a ISO file.

  But when tryng to do a VMWare client with it, it does not install and I get the following error:

  Recovery

  Your PC needs to be repaired

  The application or the operating system could not be loaded because a required file is missing or contains errors.

  File: \windows\system32\boot\winload.exe

  Error code: 0-xC0000001

  You will need to use the tools of recovery on your installation media. If you do not have any media (such as a disc or USB device) contact your system administrator or the computer manufacturer.

  Someone knows this problem?

  Thanks in advance,

  Best regards

  André.

  Hello and welcome to the communities.

  Check the checksum of ISO that you downloaded? Eventually looks bad media.

• Windows 7 operating system is not listed on software downloads and driver for HP G7000 notebook

  IM using HP G7000 notebook and my OS is vista. I want to install the windows operating system 7, but it is not listed on downlaods software & driver. is it compatible to use the driver from vista to windows7?

  Hello

  Yes you can.

  If you can connect to the internet first, launch the program from Windows Update in your programs menu. It will download and install the latest drivers for most of your hardware components.

  For anything else, you need, you can use the Vista drivers found on your laptop support page.

  You can also read this helpful upgrade guide if you wish.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/General-Windows-7-upgrade-guide-for-HP-laptops/TD-p/236034

  Paul

• I am trying to add itunes to an old computer for my kids. It has the windows xp operating system. problem of Setup Windows how can I solve the problem?

  I am trying to add itunes to an old computer for my kids. It has the windows xp operating system.  When I try to install itunes, I get an error message that says: I'm having problems with my windows installer.  I don't have an existing copy of itunes on the computer that would be a new installation.   How can I solve the problem?  I have a new computer with windows 7 and had no problem with installation on it.

  If you can not receive answers that will solve your problem, I would suggest that repost you to...

  Cummunities to Support Apple - itunes for Windows:

  https://discussions.Apple.com/community/iTunes/itunes_for_windows

• I have windows 7 64 bit operating system says my computer starts windows system 32

  I have a gateway laptop with windows 7 Home premium. Clealy system I.D. indicates 64-Bit os.  Windows has been shut down and restart without being invited.  I wanted to see the info to start.  This computer starts up and all the info in the trunk are saying Windows 32-bit system? What happened here?  According to me, that's why Windows keeps stopping.  How can I fix this? At all times, may not install certain security updates as well.

  How can I suddenly have a 64-bit os which is starting to 32-bit.  It started in early April.

  Where do you see this saying 32-bit?

  If you open your Start menu, click computer and select Properties, the system properties box that opens will tell you the correct number of bits of your operating system.

  Please note that it is possible (and very common) to have a 64-bit processor in your computer, but a 32-bit operating system.  In fact, it is the most popular configuration of Windows 7.

• How can I eliminate the getPlus + (R) operating system error when you try to download Adobe Reader?

  I have Windows 7 Home Premium 64-bit of the system. I use the latest version of Internet Explorer. When I try to download Adobe Reader , I get the error message:

  getPlus (r) error: operating system error (16263.203.319 - 72372312.80040154.FFFFFFFF.8004154) which would prevent me from download. How can I fix it? Help!

  Take the installer out of the FTP site atftp://ftp.adobe.com/pub/adobe/reader/win/9.x/9.3/enu/AdbeRdr930_en_US.exe and see if it works.

• Windows Firewall problem - unable to start service. [FIXED]

  THIS PROBLEM HAS BEEN FIXED! Thank you! SEE MY LAST POST FOR MORE DETAILS.

  I am running Windows 7 Professional 64 bit. I use Malwarebytes' Anti-Malware for a while and we had no problems with the software.

  I tried to start the Windows Firewall service for the last couple days. After some research (with no response), I tried several steps.

  Evertime I try to turn on the Windows Firewall through Control Panel, I get this error:

  "Windows Firewall cannot change some of your settings.

  0x8007042c error code. »

  First, I checked the Services. This is what I found.

  -Windows Firewall (automatic)

  -Engine of Filtring basis (Auto)
  -Windows Firewall authorization driver (missing)

  Then I tried sfc/scannow in a prompt (run as administrator). This was the result.

  "Start system analysis.  This process will take time.

  Start of the phase of verification of the scanning system.
  Full check of 100%.

  Windows resource protection found no violation of integrity. »

  Then, I went in the management of the computer and found that Windows Firewall authorization driver has a yellow top brand scream icon. Right click and clicking on properties gave this:

  Under the general tab:

  Device type: drivers Non Plug-and-Play

  Manufacturer: unknown

  Loactaion: unknown

  Status of the device: this device is not present, is not working properly or is not all its drivers installed. (Code 24)

  Driver tab:

  Service name: mpsdrv

  Full name: Firewall Windows Driver authorization

  Current situation: Decree (cannot be started)

  Type: request

  Driver details:

  Driver files:

  C:\Windows\system32\drivers\mpsdrv.sys

  Provider of: microsoft Corporation

  File version: 6.1.7600.16358 (win7_rtm.090713 - 1255)

  This error appears whenever I try to start the Windows Firewall authorization diver:

  "The system has encountered the following error trying to start the service.

  Cannot create a file when that file already exists. »

  Then I tried these commands in the same command prompt, with the results listed after each command:

  netsh advfirewall reset

  Unable to load the programme of assistance following DLL: WSHELPER. DLL.

  An error occurred while trying to contact the Windows Firewall service. Make sure that the service is running, then try your request again.

  net start mpsdrv

  183 system error has occurred.

  Cannot create a file when that file already exists.

  net start bfe

  The requested service has already been started.

  More help is available by typing NET HELPMSG 2182.

  net start mpssvc

  Error 1068 the system has occurred.

  The dependency service or group was able to start.

  regsvr32 firewallapi.dll

  DllRegisterServer in successful firewallapi.dll.

  I also tried "regsvr32 wshelper.dll" and got the following error message:

  The "wshelper.dll" failed to load module.

  Make sure the binary is stored at the specified location or

  the debug to check for problems with the binary or

  dependent. DLL files.

  The specified procedure could not be found.

  I have found wshelper.dll in C:\Windows\System32 (20KO) and folders C:\Windows\SysWOW64 (15KO), as mpsdrv.sys in the folder C:\Windows\System32\drivers (75.5 KB).

  It is all the information that I recall gathering at this time.

  If a similar problem like this has been asked and answered, please point me in the right direction.

  -Thank you.

  Thank you all, but I got it working again. It seems to be related to the Google redirect virus. I downloaded ComboFix and it got rid of the problem.

  Thank you guys for your answers.

• Operating system problems

  My laptop is an Acer Aspire and the white sticker on the back says E1-571-33124G50MnKs, which is what I guess is necessary for a new post on these forums. My laptop had the hard drive completely fried, unable to be reused. The hard drive has had an impact and just stopped working. At the start, he says "Insert bootable device" and I had this happen with one of my other laptops before so I'm aware of what has past. But I just bought a new hard drive of the computer and I really don't want to have to pay all that money for windows 8.1. I read that a few discussions they suggest that acer remembers the key of windows product, is - it true? and if this is how I recover windows on my new hard drive? Thank you!

  IIRC the E1-571 uses UEFI bot by default, and it has stored the key. You should be able to install without problems. If you reinstall from the Acer restore image you will automatically get all good drivers and other institutions.

• Vista SP1 installation failed and now my system is unable to start.

  I tried to install the Vista Service Pack 1 (SP1) and it stalled for hours with this line of text on the screen nflickering:

  !! 0xc01a001d! 28461/88529 (\Registry\Machine\COMPONENTS\DerivedData...)

  I have a Toshiba satellite laptop computer with Vista Home Premium 32-bit. I have tried everything you can imagine on these forums - including:

  -Rename the configuration files of the prompt c.
  -creation of a true recovery/repair disk (Toshiba only sent a system recovery disc, not a repair disk) and attempt to run the repair from here (nothing was fixed and instead restart, he went to a black screen)
  -attempt to restore an earlier point but, as many others have remarked, the installation of SP1 apparently removes all set points, so it's been a bust
  -a tried to run chkdsk f / but who gave me an error indicating that the volume has been used and did not work.

  NOTHING works! I can't boot my system, and frankly I'm furious that Microsoft has failed to solve this problem for 3 YEARS according to assignments in these and other forums. I've always been a devout person PC - a bit too elitist for me to Apple. But I am absolutely disgusted that I potentially have to do a complete reinstall, including downloading all my software again for all my other programs.

  I am the Coordinator of health care for the County, I live in, have 3 kids to take care of and frankly, did not have the time to deal with this kind of setback. I worked on ALL this DAY, ruining the Superbowl Sunday, something that the people at Microsoft obviously don't care no difficulty. That tells you how much they care about customer support, I guess.

  If anyone has found a viable solution to this problem that CREATED Microsoft with an update that was supposed to IMPROVE their Vista defective product, please, please, help! I wish I had never entered in this horrible computer vacuum! Only, I tried to download this update because I received an email from Microsoft that offers a download of Windows 2010 beta to try, and everyone spoke of so many Windows 2007 (unlike Vista) I thought I would give it a try - only to find out that I had to have SP1 to install 2010. I feel I'm in a Kafka story.

  Thank you.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Change of operating systems problem

  Big question for the tech people out there who knows how to solve this problem. I bought Windows 7 to replace my old Windows XP. When I loaded it on, Windows 7 has got recorded on one of my internal hard drives and not my C drive. Anyone know how I can remove XP C drive and replace it by the already loaded on Windows 7? I have tried to format the C drive, but it does not. Annoyingly, whenever I start my computer it wonder if I want to load Windows 7 or an earlier version (XP). Any help would be great :D

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Unable to start the download of lightroom

  Hello

  from this link:https://creative.adobe.com/fr/products/download/lightroom?promoid=KSKAY

  No download is started, I got there firewall off and ad block paused.
  Why, its impossible to start any what download. On Google Chrome and internet explorer, it's the same thing...

  Please advice! Thank you!

  Windows: Lightroom 4.4

  http://www.Adobe.com/support/downloads/thankyou.jsp?ftpID=5567&FILEID=5579