^ Operator never consolidation

Similar Questions

• Formula of Member who recognizes the operator of consolidation...

  Here's the scenario.
  
  We have a hierarchy of accounts with an account of the dynamic calc that calculates the amount of the "tax" on our Net income. However, each feature has a different calculation for taxes, so we have a member formula that calculates taxes for this entity and descendants based on a stored percentage. This percentage is stored at a low level for each business entity because senior level members are a summary of the different calculations.
  
  However, we have several "alternate" hierarchies, which must also calculate taxes on them, but that these are constantly changing, we don't want to have to keep changing the formula of Member for the calculation of the tax.
  
  For example:
  The hierarchy of accounts:
  Net income (loss) (dynamic)
  -Net pre-tax income (+) (dynamic)
  -Taxes (-) (dynamic)
  -(+) (Dynamic form) of tax calculation
  -Other Taxes (+) (stored)
  
  The hierarchy of entities:
  
  Main company
  --The company also
  -Division 1
  -Division 2
  -Division 3
  -Company B
  --B division 1
  --B division 2
  -B, Division 3
  -Company C
  --C division 1
  --C division 2
  --Division 3 c
  Stacks of spare
  -Company less a Division 3
  -Shared company a (+)
  --A Division 3 (-) shared
  -Total without C company
  -Shared company a (+)
  -Shared company B (+)
  
  So the formula of Member for the calclulation of the tax is now:
  IF (@ISIDESC ('company A'))
  "Net profit before tax" * "Division 1"-> "tax percentage";
  ELSE IF (@ISIDESC ("company B"))
  "Net profit before tax" * "Division B 1"-> "tax percentage";
  ELSE IF (@ISIDESC ("C company"))
  "Net profit before tax" * "Division C 1"-> "tax percentage";
  ENDIF
  
  The problem is that the alernate rollups have no any calculation of tax. To make them, we must therefore specfy them as well:
  IF (@ISMBR ("company within Division 3"))
  "Society has"-"Division 3";
  ELSE IF (@ISMBR ("Total less company C"))
  "Society has" + "company B";
  ENDIF
  
  
  There are tons of these hierarchies replacing, so this formula member becomes difficult to manage. In addition, business users now have to know that if they change an operator of consolidation on the entities, they also change the calc script.
  
  My question is - is it possible that I can 'default' member formula to use the consolidation of entities when calcualting for some entities, instead of having to specify in the formula itself?
  
  I tried to use another
  @SUM (@DESCENDANTS (@CURRMBR ("Entities")))
  who works for these hierarchies replacing who no longer like the cosolidation.
  
  Is it possible to do what I'm trying to do here? This must be a dynamic calc and I don't want to significantly change the structure of the database.
  
  Thank you.
  
  Edited by: westn on May 26, 2010 10:03

  One thing is not clear, if hierarchy as substitute parents ' company A under Division 3 'are "stored" or "dynamic Calc." members. "

  If they are dynamic calc, which makes them "twopass" will happen your solution without any necessary calculations for other hierarchies in the calculation of the TAX.

  If they are stored, it gets a bit more complex.

  I guess that we can achieve this marking UDAs as shown below.

  For example, in this case

  -Company less a Division 3
  -Company shared a (+) (UDA: ADD)
  --A Division 3 (-) shared (UDA: SUB)

  and the calculation for hierarchies of alternatives can be as shown below.
  @SUM (@remove (@DESCENDANTS (@CURRMBR("Entities")), @UDA ("Entities", "SUB"))) - @SUM (@remove (@DESCENDANTS (@CURRMBR ("Entities")), @UDA ("Entities", "ADD")))

  I did not test this, but I guess that it should work in your scenario. Let me know the result of that.

  -Krish

• How to make consolidation operator (~) instead of (+) by placing it in the rules of the load.

  Because by default it will make my child (+) values after build in the cube. I don't want one by one change the operator of consolidation in the values of the child to (~) in the outline. It must therefore be made in the rules of the load. For your information, for my build parameter dimension, I have defined this reference generation and in the dimension of the generation properties, I put as a generation like the field and field number 2. I can't find the setting to make all my child operator of consolidation so that it takes (~) in the rules of the load. Thank you

  What I have in my .txt file. that is open in the loading rules that have columns.

  Value1

  Value2

  Value3

  What I did after having built the loading rules in the cube.

  Stored MyDimensionName # Default # (3)

  Value1 (+)

  Value2 (+)

  Value3 (+)

  What I want to achieve.

  Stored MyDimensionName # Default # (3)

  Value1 (~)

  Value2 (~)

  Value3 (~)

  Hello, I did it before I saw your reply. I add a first column to help to create a field using text, and I type in ~. So total I now have two columns

  Field1 Field2

  Value1 ~.

  Value2 ~.

  Value3 ~.

  After that, for my dimension build setting, I put it as a reference of generation. In the generation of dimension properties, I put it Field1 as generation for the field and field2 as a property for the field. I have set as number2 Field1 and field2 as number2. I need to change my stored MyDimensionName # Default # (3) stored MyDimensionName # Default # (3) (Label only) If no, it will not work. That's how I did it. Haven yet tried your method. That means that u create using a field using text that is gen1 for column1, and ~ to Column3? In total it is therefore 3 columns?

• ODI and never consolidate

  Planning 11.1.2.1.
  Runs an ODI process to build hierarchies of relational tables. I have the members being rejected, when I look at the ODI error log I see this error...
  
  Could not load the dimension member, error message is: java.lang.IllegalArgumentException: invalid value for field operator of Consolidation for '< database_name >' plan type: ^.
  
  It is confusing to me because I don't understand why he doesn't like the ' ^' as a building operator.
  Any help or ideas as to what I need stored on my db Oracle to be a 'never consolidate"in my cube?
  
  Robert

  Here is an example of using replace - http://2.bp.blogspot.com/__2AaArK5lW8/SUZtOlRHCsI/AAAAAAAAA5c/jJD9JSoCB4Q/s1600-h/11.png

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Apple tv 4th gen unable to buy the movies if to never ask for the password and code value of active access

  Hello

  I noticed that since a few weeks I'm not able to buy a movie more if:

  -Set store account never ask for password

  -Activate restrictions (set a password) and all buy "limited."

  It works with the same configuration perfectly on my Apple TV 1st, 2nd and 3rd generation, where clicking on the buy button you are prompted to enter the password instead of having to enter your iTunes account password every time.

  But on the Apple TV 4th gen, once I click the button to buy, I get the circle of rotation and it keeps just there, never ask the password so that the operation never happens.

  If I disable the restrictions for the purchase of movies, I can buy the movie (do not ask for an access code and password)

  If I put the password on all your purchases, I am also able to buy the film.

  But still, if I set the password to "ask always", then enable password, set 'focused' purchases (so I'm in the best situation: should I get the password dialog box when I'm about to buy anything, rather than the full itunes password) it simply doesn't.

  I tried: record / stop all accounts (not just the store, but also iCloud, gamecenter, home sharing, etc) - nothing

  Also tried to restore the device and set up from scratch: nothing.

  Apple TV 4th gen updated to the latest version of the software (tried to update, said: I'm updating)

  And again, if I try to do the same thing on Apple TV 1st generation, 2nd generation, 3rd generation, they have all THE work. (Click on buy, get the guest password, enter my 4 digits, in fact)

  The thing is that I am convinced that it worked before this nonsense.

  I'm in Spain, and my account is linked to the Spanish bank

  Any ideas?

  I'm afraid that you'll just have to disable restrictions until the problem is resolved.

  If you want to report your experience to Apple, you can send them your feedback here, choose 'Report a problem' in the menu type of feedback.

• VMWARE SERVER OR ESX? infrastructure consolidation

  Hello

  We must take a decision on a simple question. To consolidate our 2 servers on VMWARE SERVER 2 or move to ESX.

  Currently, we have 1 esx (performing a large) and 1 SERVER VMWARE 1.06 (no operation never met nor). We have more skills on VMWARE SERVER and we vmwares heavily downloading clients (vms development).

  On VMWARE SERVER, it is crystal clear, but on ESX (especially with LINUX VM) is tricky. Under Windows, we use the converter but with linux, we don't have many options.

  I think the underlying question is: product IS VMWARE SERVER is going to disappear?

  Any notice will be really appreciatte!

  Kind regards

  Hernán.

  Moved to a more appropriate forum

  hmarsili wrote:

  We must take a decision on a simple question. To consolidate our 2 servers on VMWARE SERVER 2 or move to ESX.

  Currently, we have 1 esx (performing a large) and 1 SERVER VMWARE 1.06 (no operation never met nor). We have more skills on VMWARE SERVER and we vmwares heavily downloading clients (vms development).

  On VMWARE SERVER, it is crystal clear, but on ESX (especially with LINUX VM) is tricky. Under Windows, we use the converter but with linux, we don't have many options.

  I think that you have very well answered your question on what platform you use. You seem to be a lot more comfortable with VMware Server - and it's a great product - so why not stick with it? You might consider ESXi (free version)... assuming that your hardware will support it, but I think you might find the complexity of dealing with ever-present VMFS file system - and it sounds like it is your biggest problem with ESX.

  I think the underlying question is: product IS VMWARE SERVER is going to disappear?

  Not any time soon. VMware Server fills a different niche than not ESX/ESXi. VMware Server 2.0 is already available and I do not see VMware keeps the product - it is an introduction to virtualization soft and is a path to the company, ESX product range.

  Ken Cline

  Technical Director, virtualization

  Wells Landers

  TVAR Solutions, a company of the Wells Landers group

  VMware communities user moderator

• Operators of consolidation during the creation of the Dimension

  Hello world
  
  When creating of dimension hierarchy, by default, all generations download default adding (+) as the operator of consolidation.
  How do I know (~) few members of groups for the same or different generations?
  
  Thanks in advance

  If you do this from file to build dimension, create a property column. For the members that you want to be non - consolidate, put a tilde (~) in the column.

• Dredging of a member values

  I made a simple form to enter percentages inside against the entity dimension that has the parent-child relationship. All parents have the dynamic value Calc. The problem is that these percentages added on parents which gives very bad impression of the form. Is there a way I can erase these percentages of parents? even the calculation of re-encoding does not work on this situation.

  Hello

  What about simply by changing the operator of consolidation for the Member account % on "never"?  Is it is not configured for this at the moment so I guess that's the question... as you say, is not supposed to add % in most cases.

  JB

• Resolve the conflict of data type of TestStand pragmatically in CVI

  Hello

  I'm porting a UI for the 2010 ICB/TestStand.  My problem with the badly planned spread data types defined custom.  While I can handle the MyTypes.ini and StationGlobals definitions, sequences that we are loading are originally the dialog box 'Type to the Type of conflict'.  The sequences that are loading have been created in previous versions of TestStand (3.1 and 4.0 for the most part).  The main reason why a 'conflict' is detected because the data types of the sequences can either have different indicators (for example, "modified") or updated dates.  The structure of the types are ALWAYS the same, so there is no danger by choosing the "wrong" data type  However, given that the "currently loaded" Type is one that "must" always be used, it would be great if the resolution could be resolved so that the operator never has to see the dialog box.  In our environment of manufacturing of these dialog boxes are considered errors.

  There are hundreds of files in sequence that could be affected.  The process to go through each of them individually and setting data types would be impractical (really, out of the question).

  I use TSUI_ApplicationMgrOpenSequenceFile() to open the sequence and can not find a way to settle the conflict resolution to automatically choose the "currently loaded.  Please let me know if there is a way to do it, and if so, provide an example.  Any other suggestions you might have would be welcome.

  Thank you

  JF

  (Either by the way - I meant "programmatically", not "pragmatic" in the subject heading)

  I tried your suggestion and I still get the dialog box when

• HP Photosmart 5514: HP Photosmart "in use with another task' error.

  I'm sure you're all sick to see these questions, but I have not found that a reliable solution among the responses presented anywhere else on the internet.

  I have a printer HP Photosmart 5514, part of the 5510 B111 d e-all-in-one printer series, and it currently only allow me to scan a single document (with multiple pages). I connected via USB, not the network connection. My current operating system is Windows 10, 64-bit. I've uninstalled and reinstalled the drivers several times, using different methods: a part of the HPSolutionsFramework, installation of the manual pilot on its own and even with the method of detection of device HP Support Assistant. I tried the most common answer of "unplug, restart the computer, plug in. I also tried printing HP and doctor Scan to see if there is a driver problem but it clears all controls and nothing seems to be wrong. To be clear, restarted my computer "solve" the problem, even temporarily and no is not a final solution to my problem.

  Explanation of the issue:

  I run the HP Photosmart 5510d series software and click on the button "scan a Photo Document or". When the window opens, I click on "scan document to the file" and proceed to scan my document with however many pages, adding each page I want. When I'm finished, I hit 'save', my backup file and click 'done '. When I proceed to scan another document, hit the button causes nothing happen but one his mistake. When I start printing HP and Scan doctor and trying to do an analysis of test after he tells me that everything is going well, I get the error message:

  "The HP scanning application is currently in use with another task or another user on this computer. Please wait until the other task is finished, and then try again. »

  To be quite clear, there is no other task that I'm aware of in addition to the fact that somehow the software does not seem to let go of the analysis. There are no other users who use the computer outside of me. There is no other hidden running application. I went through the Task Manager to kill all the associated HP process to see if something it stops to run again. The only chance I have is with my computer restarts, but it would be foolish to scan documents of mass and restart after each.

  It worked properly on my other hard drive with the same version of Windows 10 installed on it. 10 Windows installed on a new drive and it does not appear to want to work after 1 document.

  If anyone has a help in this case, it would be greatly appreciated.

  Hi @Yenroh,

  Welcome to the Forums of HP Support!

  I see that you are able to scan with your HP Photosmart 5514 printer wireless. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Generally speaking, the reason why you get "the HP scanning application is currently in use with another task or another user on this computer. Please wait until the other task is finished, and then try again. "is because that the network signal is lost the connection and the freezing of the task analysis or the previous scan operation never ended.

  Please, try the steps in these guides:

  • Scan network connection is lost (Windows)
  • "Scan cannot be performed because another program or computer uses the network device" message in Windows when scanning on a wireless network

  TIPS:

  • Move the printer and the router more closely in order to improve the quality of the signal.
  • Change the channel on the router wireless.

  Ensure that your router and firewall do not block these ports.

  • Scanning: The UDP port: 427 TCP ports: 9220, 9500

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Repair of regular sector - work not

  I planned, Vista at the next reboot to analyze and attempt to recover bad sectors by following the instructions on the link below.  The planned operation never occurs...

  CHKDSK notes that I have bad sectors and after reboot confirms that they remain bad.

  Of the ideas or alterantives you can suggest to get Vista to do the desired scanning and repair?

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  I think it is because you do not have the command, / f/r , to make the repair.

  Try it this way...

  Start button > Search box, type cmd > look up, right-click on cmd.exe > Run As Administrator >

  in black and white, window at the flashing prompt, type chkdsk/f/r > press the Enter key.
  Note: there is a space between 'chkdsk' and ' / '.
  The screen will say something like cannot do it now, but you want to run it on reboot. Click on 'y' as in Yes > press > window cmd of output.
   
  Restart your computer. It will take a while. DO NOT stop the machine. Just wait.
   
   

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Select DataSet from the pl/sql table

  Hi Experts,

  I need to create a metric of OEM 12 c extensions. I must create a pl/sql code that can return results to OEM.

  The following code works in OEM. But the problem is that I need to create a permanent table for this case.

  Could you please tell any other option available to do this without creating additional objects at the database level?

  Based on the requirement of the OEM, the end of the script, I have to do something like ' open: 1 to select in the <>' to return the results in a table.

  Thank you.

  ###########################################################################################

  DECLARE

  TYPE cur_type IS REF CURSOR;

  CURSOR c1 IS

  SELECT distinct (owner: '.) ' || queue_table) as queue_table FROM dba_queues;

  l_cur_string VARCHAR2 (200);

  C2 cur_type;

  v_queue VARCHAR2 (128);

  number of v_ready;

  BEGIN

  run immediately "remove sys.testing";

  FOR v_queue_table IN c1 LOOP

  l_cur_string: ='select q_name, count (*) from ' | v_queue_table.queue_table | ' where State = 0 or (State = 1 and sysdate > nvl (delay, enq_time)) q_name group ';

  OPEN c2 FOR l_cur_string;

  LOOP

  C2-FETCH INTO v_queue, v_ready;

  OUTPUT WHEN c2% NOTFOUND;

  run immediately ' insert into sys.testing values (: v_queue,: v_ready) "using v_queue, v_ready;"

  OPEN: 1 for select * from sys.testing;

  commit;

  END LOOP;

  CLOSE C2;

  END LOOP;

  END;

  ###################################################################################

  In addition, committing inside of cursor loops are false.  You should never engage at the end of a business logic operation, NEVER in cursor loops.

  Something along these lines (untested) is probably what you want:

  var refcursor rc;

  declare

  SQL varchar2 (32767).

  Start

  SQL: = q'[select

  table_name,

  TO_NUMBER)

  ExtractValue)

  XmlType)

  dbms_xmlgen. GetXml ("select count (*) c to ' |") table_name | ((' where State = 0 or (State = 1 and sysdate > nvl (delay, enq_time)) q_name group '))

  (("/ LINES/LINES/C ')) County

  from (select distinct owner |'.) ' || queue_table as table_name dba_queues)]';

  Open: rc for sql.

  end;

  /

  print rc;

• Ask about the load of metadata in Essbase using the rules file

  Hello

  In our application, we load the metadata using the Essbase rules file and here, we are faced with a problem. Suppose we have load a member of level 0, called "xxxx" under two different parent, assume parents are Parent_AAAA and Parent_BBBB. But our demand is the operator of consolidation for the first occurrence (i.e. under the Parent_AAAA) is '+' and for the Member shared under Parent_BBBB is ' - '. But, when we are load using rule file the operator of consolidation for the Member always shared loading as ' + '. Y at - it a trick to change the operator of consolidation for other than manually changing outline shared member?

  Pls help... Thanks in advance.

  I don't think that there is a way to change the default setting.

  However, what you can do is to have a different charge and rule file different text with only the metadata that you want to have an exception for shared members. In this way, you can get that you don't have to change existing rules file.

  Concerning

  ORACLE | Essbase

• The implementation of replication by the issue and do a read/write via DB as well

  Hello
  
  We have replication between two clusters that is configured as below
  
  < reading-writing-support-map-plan >
  < internal-cache-system >
  < local plan >
  < / local plan >
  < / internal-cache-system >
  < dumps-plan >
  schema < class >
  > class name < com.oracle.coherence.patterns.pushreplication.PublishingCacheStore < / class name >
  < init-params >
  < init-param >
  java.lang.String < param-type > < / param-type >
  {cache name} < param-value > < / param-value >
  < / init-param >
  < / init-params >
  < / class-system >
  
  < / dumps-plan >
  < / reading-writing-support-map-plan >
  
  We also have another editor who writes to DB (direct entry), the operation never set. This is achieved by adding
  
  xmlns:sync = "" Class: com.example.test.CustomPushReplicationNamespaceContentHandler ' in coherence - server.xml and "
  
  < sync: Editor >
  < sync: Publisher-name > clientele2-JDBC-editor < / sync: Publisher-name >
  < sync: Editor-system >
  < sync: custom-Publisher-plan >
  < / sync: custom-Publisher-plan >
  < / sync: Editor-system >
  < / sync: Editor >
  
  (follow this doc,howto_develop_a_custom_push_replication_publisher https://blogs.oracle.com/cosmintudor/entry/coherence_-)
  
  In this, we were able to run DB update every time that could happens (normal put or push replication put).
  
  We now want to know, how to read through?
  
  
  Note: we have not used CacheLoader interface to implement Write Through. We have extended AbstractPublisherScheme to implement through writing. There is no charge method in the AbstractPublisherScheme class to play through.

  Hello

  To reach it, you must implement your own cache-store "Store1" that extends PublishingCacheStore and implements BinaryEntryStore. In your configuration, use "Store1" as the cache-store and not PublishingCacheStore. In the implementation of the 'Bank' 1, call super.load()/super.store () in your methods of load/store if you want to push the retrieved entries in your load() method store() otherwise do not call super methods.

  I hope this helps!

  See you soon,.
  NJ

• Can not remove snapshot

  In a previous thread, I mentioned problems with Storage vMotion (http://communities.vmware.com/thread/214222) and verification of stereotypes has been proposed. One of my virtual machines had a snapshot, so I went to delete with the Manager of snapshots at the VIC. However the operation never completed and showed the error message 'Operation timed' out after being stuck at 95% for a few minutes. I tried again to remove the snapshot because he was still appear in the Snapshot Manager. Now when I try to delete the ir I get this message: "the request refers to an objexct that no longer exists, or never existed."

  Any ideas?

  Thank you!

  Hello

  When remove you the snapshot, you are actually 'commit changes', this could be a lengthy process, depends on how the changes were there.

  Virtual Center will give you "opération Timeout" error 15 minutes by "default."

  This does not mean that the operation will not end. Just give it time, it takes sometimes hours to complete.

  The Board of Directors for the deletion of the snapshot from research, and there are many of us who have encountered this, including me.

  It is completed then and you'll see not snapshot in the Snapshot Manager, files related to the snapshot is deleted in the VM folder also

  +++Please note all useful messages.

  Alex