optimizing performance of Essbase

Similar Questions

• My computer is slow and a pop-up Microsoft says that my color palette is perhaps not where it should be for optimal performance

  Original title: my color sceme.

  My computer is slow and a pop-up Microsoft says my sceme color may not be where it should be for optimal performance, before I could click it properly, he disappeared. How can I change my sceme of color for optimal performance, Windows Vista Basic.

  Hi Mydajaz,

  ·         What is the pop-up message exactly says?

  ·         Did you do changes on the computer before the show?

  I suggest you to refer to the mentioned article and check if the problem still persists.

  How can I decide to change the color scheme to improve performance?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-decide-whether-to-change-the-color-scheme-to-improve-performance

  Let us know the results.

• Can I reduce the size of the pagefile, or does this size for optimal performance of the rig?

  Hi all.

  I recently increased my memory of 4 GB to 12 GB.  I noticed that my pagefile has increased in size that corresponds to the installed memory.  Can I reduce the size of the pagefile, or does this size for optimal performance of the rig.

  See you soon.

  Original title: size of pagefile.

  Swap files are always important. UNIX, Linux, MacOS and Windows all set up to Exchange files and use them. Some applications also require the existence of a file...

  The only people who need to limit the size of pagefile are those whose disk space is very valuable to the critical operations of mission currently running on the computer.

  Do not be fooled into thinking that the loading RAM is the best option, because it's not like people in the above paragraph you would say.

• Decreases in health battery optimized performance

  I have this problem where when I choose this option, the game performance decreases significantly. I have a y510p with a geforce sli dual 755 m. The second graphics card goes off when it is not plugged in, I'm guessing that the case is at the moment. I rebooted my computer with restart of the entire application and it was not fixed. What I have to reduce my battery less than 60%, then plug it in then get back to normal performance or what.

  Understand the problem. You must connect the charger and decrease the battery below the battery to optimize it. Then you plug it in and it is fine. 60% it says plugged in and not charging and the GPU works both

• Optimizing performance (vector vs. Raster)

  Public Hello,

  I am trying to improve the rate of game that appeals to many floor tiles. Currently, the floor tiles are stored and vector graphics in the form of different frames in a clip. I wanted to experiment with the pixelation a floor tile and see if that would allow any frame rate increases. I did it by one of my windows (one of the frames in my video) convert a png image and replacing the version vector of this tile with this version of raster. I then tested two worlds - a tile filled (vector) and another filled with tile B (png).

  In all my tests, world with tile (the original version of vector) surpassed the world with slab B. I'm guessing that I'm not getting the expected performance gains is because I'm always the tiles in the old style and do not use any strict bitmap draw calls?

  Can someone help me get a better understanding of why it is that this method fails the rendering speed booster? I have to spend my bitmap rendering code strict draw calls? Any insight or links to relevant articles or sites would be greatly appreciated. Thank you, all.

  in most situations, you expect any non-translationnelle transformation (IE, all other than x, y change) request less computer resources when it is applied to a vector vs a bitmap cacheAsBitmap is applied or applied both or.   you would expect everyone to use less resources during non-translationnelle transformation when cacheAsBitmap is disabled.

• Question of optimizing performance - CSS or custom component?

  I'm trying to optimize the performance of my application of slimming things down as much as possible. In my application, I have several paintings that all exactly the same, but each of them has an image applied as their background. The image in question is a png, which means apply the background image for each canvas with this particular image would mean essentially that at the start, that this image is loaded only once for each canvas, which means that that would take more space and time than necessary.

  This what I asked, what would be the best way for this slim down? Using css and applying a style across the canvases which has Imaging applied in the file css or creating a custom component that has a background image applied to it and use it for paintings?

  3 & 4 are the same.  1 & 2 are almost the same, but 1 will start the load

  later than 2 and the two won't be able to display the image until it is

  downloaded.

  3 & 4 will be able to display the image immediately, but it's because the

  the user had to wait for the image to download until he could see anything

  other than the download of the progressbar.  The entire application will start not before

  the image data is downloaded as part of the SWF file.

  Sometimes, the best way to get performance is not not to actually improve

  performance, but rather to improve perceived performance.  For example,.

  you could incorporate a version low resolution of the image in the SWF file that takes only

  50K for example and add a blur filter and move it all in high resolution

  version being downloaded by a hidden Image control, then trade in the

  high resolution when it will be ready.  When an image is blurred or mobile

  quickly, it is hard to tell the quality of it.

• LR3 configuration for optimal performance

  Hello

  I'll install LR3 on a newly build PC with a Velociraptor 150 GB (10000 RPM) for the operating system (Windows 7 64 b), small SSD for virtual memory (25-30 GB of free space) and a HDD 1 TB 7200 RPM / min for photographs and other data. It has 8 GB of RAM.

  Where you would put the cache and the catalog in LR3 to optimize performance?

  Thanks in advance for your answers.

  Adrien

  No, normally you can't, that's why I was asking.

  There are a few things (symlinks, junctions), but I don't know if

  they work very well.

  I didn't know I could put some previews and catalog in two different places.

• Optimizing performance with an SSD.

  Can someone refer me to online information about how to optimize startup and execution of the program selected by installing the OS (Win 7) and some intensive programs (MS Office 2007 and Adobe CS4, Photoshop mainly) disc on a 80 GB SSD, but maintaining / installed everything on a large drive hard 'standard', the user i.e.:ALL files (documents (, scanned documents, digital photos, music videos, etc.) and less intensive disk or less programs frequently used?  I can easily install Win 7 on the SSD ("C" drive), but it sets up the path of directory and 'Users' data on the same drive, by default.  I'm reluctant to mess with the registry, but do I have to in order to move all the files from the user to drive "D" or "E" (two Seagate 1 TB disks). I'm on an Intel CoreDuo test mode, platform of Quad with 8 GB of RAM, but will migrate to a new I7 with 12 GB of DDR3 as soon as I'm uncomfortable with this installation process - but I don't think that all the material, other than readers, is very important for the problem.  Thank you.

  Hello TheKahuna,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is a problem installing Windows 7 positions and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro?ITPID=sprblog

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Call the Essbase Calc of custom Script FDMEE script

  Hi Experts,

  In my reuirement, I must run Essbase calc script to export the perticular accounts data and then import these data into FDMEE to load in another planning application.

  I know we can run the Application Esbase calc script fromTarget page and after load. but in my case, executing the script should happen prior to importation.

  Aanybody may suggest an example if I can call the script to calc Essbase to a custom event BefImport script or FDMEE script? an example of the syntax would be useful

  Thank you!

  Hello

  are what version of FDMEE you?

  You have an example document to support FDMEE sample scripts (Doc ID 1613836.1)

  You can have a MAXL command in your batch file to perform the extract

  Example 5

  An example script to calc to perform an Essbase excerpt and then load the file extracted with FDMEE.

  1. Create a batch (.bat) file that performs extract Essbase.
  2. Call the scriptimport BefImport event operating system batch file
     import of subprocesses
     Import shutil
     OS.chdir ("D:\temp\\BatchFiles")
     command = ' D:\temp\BatchFiles\helloworld.bat > helloworld.out '
     p = subprocess. Popen (Command)
     RETCODE = p.wait)
  3. Load using FDMEE HelloWorld.out

  The Jython script can be created in the BefImport Script.

  Then you can have a rule of data loading with a file in it name (Ex: Essbase_Extract_XXXX) where XXXX is that five-year period.

  Your jython script should create this file, so in the case of import, the data is imported

  Keep in mind that it is an output of feature 11.1.2.4 box so if you are in 11.1.2.3.x I wouldn't put a lot of effort in a complex solution

  I hope that this puts you on the right track

• Essbase contour optimization

  Can you please help with the contour question below and correct me if my interpretation is correct.

  To arrange the dimensions in large hourglass for optimal performance model lines should I look 'Stored members' 'Dimensions' tab on the properties of database in environmental assessments or is there any other place to examine how the dimensions are organized?

  Thanks for all you help.

  I agree with GlennS_3 that the hourglass model is old.  It has been even longer than version 5.  It was recommended by Arbor before Hyperion enter the picture.

  The hourglass design was based on the use of the Calc cache hash table.  The last Sun called dim anchor.  If you can adapt all other than the low anchor rare dims, you can use it to identify the blocks that had to be recalculated.  It makes a huge difference in calc times if you could get a cache hash table several bits calc.  Therefore, making the largest size of the last dimension would decrease the size required for the hash table.

  However, the calc engine overhaul from version 4 to version 5, greatly reduces the need for it.  The addition of parallel threads in calc scripts led to a larger dimension order.

  Put the dimensions not last concentration.  The parallel threads will run against the last sparse dimension (or dimensions if you assign multiple), so if you have years or versions and scenarios that should not be added together, it's a good size for the calculation in parallel using nets.  Put first Dense, account, then time, then largest to smallest.  This is not critical, but it provides an advantage with the order of operations in two calculations of pass.  He ready also to sort of benefits during the optimization of data loading and playback of exports.  Finally, put the library size stored in order from the largest to the smallest.  This provides better performance the computation of sparse multidimensional because it reduces the total number of blocks of pavement.

  The number that you want to use is in the properties of database on the Dimensions tab.  Registered members!

• Parameters optimized for After Effects with regard to the GPU

  It would be valid to increase the memory of texture? can get up to 1488 MB.

  And please, more tips of possible settings for optimal performance of After Effects the most.

  
  

  Setting in preferences / Previews / information GPU...

  

  Current settings:

  Fast draft:	Available
  Texture memory:	794.00 MB
  Ray-tracing:	GPU

  OpenGL

  Seller:	NVIDIA Corporation
  Feature:	GeForce GTX PCIe/770/SSE2
  Version:	2.1.2 NVIDIA 347.88
  Total memory:	1.94 GB
  Shader Model:	4.0 or later

  CUDA

  Driver version:	7.0
  Features:	1 (GeForce GTX 770)
  Current usable memory:	1.60 GB (at the launch of the application)
  Maximum usable memory:	2.00 GB

  The ray-traced rendering engine is considered obsolete and does not see any further development. As Dave says, this would serve you best to learn the new tool and more robust (Cinema 4 d Lite which is free as part of the CC and CC 2014 installs) and ignore the outdated and soon-to-be-removed old technology (ray-traced rendering engine).

  That being said, the ray-traced rendering engine will be considerably accelerated on the GPU vs CPU. As for what settings work best, test them and find out!

• Performance issue while stock reterieving/conclusion

  Hello friends,

  In the module inventory while the elements of recovery/conclusion takes too long, entire list takes 3 minutes at least to get all the items. There are about 10,000 positions in total.

  I downloaded the file tkprof here. Free file:

  call the query of disc elapsed to cpu count current lines

  ------- ------  -------- ---------- ---------- ---------- ----------  ----------

  Parse        2      0.00       0.00          0          0          0           0

  Run 2 0.00 0.00 0 0 0 0

  Get 32 253.39 253,46 0 161461280 0 20084

  ------- ------  -------- ---------- ---------- ---------- ----------  ----------

  Total 36 253,40 253,47 0 161461280 0 20084

  Chess in the library during parsing cache: 1

  Lack in the library during execution cache: 1

  Optimizer mode: ALL_ROWS

  The analysis of the user id: 173 (APPS)

  Please, help me tune.

  Oracle EBS 12.1.1 with 11.1.0.7 on OEL 5.8 R.

  Thanks cordially

  Mohamed Ahmed

  HI Mohamed Ahmed,

  Please confirm that you have recently executed gather statistical diagram. Otherwise, run schema statistics gather and confirm.

  In addition, also see note:

  INCOIN: Why should the tables truncated Interface (Doc ID 1347604.1)

  Optimizing performance of import point Hub/inventory of Oracle (Doc ID 1208945.1) products

  Thank you &

  Best regards

• Performance of the guest operating system Win2k3

  VM Workstation: v6.5.5 build 328052

  Host OS: WinVista Ultimate (64-bit)

  4 GB of physical RAM

  50 GB of free space

  64 bit chip

  OS comments: 1) Windows 2003 SBS 2) Windows 2003 SBS

  1 GB OF RAM 1 GB OF RAM

  8GB 32 GB space space allocated

  < < SLOW > > < < ACCEPTABLE > >

  The issue I'm having is on the slopes significantly slower than #2 #1 VM.  #2 works pretty decently.  #1... well over this long last week I started it after being unused for awhile.  I got the prompt to install VMTools so I did this. He took over 36 hours to install VMTools!  ;-((.  I want to update the operating system with updates from MS since several months, but I did not "months (or more!" to run through the update.

  What are the options (performance etc.) would you suggest for #1?  Apparently, the two #1 and #2 are the same, as far as I KNOW, in all other aspects of the guest operating system and settings.  Is there a setting/performance video or paper about this game and how build/debugging etc. for optimal performance?

  TIA!

  Hello.

  How did they build each of these virtual machines out there?

  #1 is slow if #2 is also well off?

  Good luck!

• 2 running on the same computer - Question of Performance vmwares!

  Hi everyone, Im quite new post on these forums, so I hope Im posting this question on the right place, if not, forgive me.

  My question is,

  Im trying to run 2 workstations vmware on my computer with my main window.

  I'm using windows xp sp3 on the vmwares as well as on the main window

  Well, my problem is, it seems that with 2 vmwares running, some programs I opened on two of them will slow down the vmwares as it rly looks like an old computer running on vista (for example)...

  So my question is, is anyway that I can do the 2 vmwares perform better?

  Only a vmware works perfectly, but when I got the 2 open and I try to run different things on two of them, they slow down and hit low lvls performance...

  Well,.

  Ive tried to put more memory ram for each vmware

  Ive tried to put less memory ram for vmware wach

  Ive tried to lower resolutions or colors or themes

  But none of them gave positive results, I think that lower the ram to each of them did work a little better, but not as much as I need.

  Now, I had 2 vmwares and 1 of them is cloned from the other and Im wondering if it matters at all in terms of future performance, exactly what I need now.

  My computer specs are as follows:

  core2 quad 2.83 ghz processor

  4 GB ram 800 mhz

  XFX 750i sli motherboard

  SATA hd

  I RLY want and need to have these 2 vmwares works perfectly on this computer.

  What can I do? And/or what say u?

  Any material of parts upgraded? Or the problem is the configuration of the vmwares?

  As I said Im wondering if the vmware clone affects this, and if I should just create a new vmware instead of cloning that... etc etc.

  Or if I should buy more ram... or if its all in the vmwares configuration

  Please let me know what can I do to increase performance or have a perfect combination of 2 stable vmware running on my computer with programs inside also running well.

  Programs are not heavy, Id say like programs for simple tasks. Ive checked the processor used and he's not above 30 to 40%, so I really think it's something I can improve in the settings or parameters of ram or vmware is not cloned configuration or something around that.

  If please post and correct me if Im wrong and tell me what I can do!

  Thank you very much in advance.

  I run multiple instances of VMW7.01 every day.

  Most of your performance problems will be your hard drive bottlenecking, I run W7 64 b with a few gadgets that monitor the CPU, disk IO & RAM so I can see when the hard drives work flat.

  In any case of the performance tips.

  If you have the RAM in VM 7.01 Edition, preferences, tab memory. If you have 4 GB RAM to say or to choose before integrate all VMs reserved host RA

  If your don't have the ram then choose the Middle option. and in all cases try to allocate as much ram as you host can. For example on my 8 Gb VM will allow me to allocate more 5990 MB is needed I guess under W7.

  With regard to your guests. Change the settings for the Virtual Machine, use what is recommended for XP you can use 512 MB, processors, I have not really noticed much difference in performance if I allocate 4 cores or a carrot.

  Disk space I allocate a sum say 40 GB to a XP guest, but I leave the disk extend depending on use so it is not allocated in advance disk space. If you click the utilities button you can also defragment hard drive here as well. I don't know how that compares to defragment the guest himself, but if you have a lot of time in your hands, I guess you could try the guest operating system own Defragmenter, then try the Defragmenter utility VM.

  Network Adpaters get better performance if NAT value, if not to communicate with the host to a guest and vice versa using a bridge the package must go down the wire to the router/server and then travel back to the host even if it's the same thread! You will notice more if you use shared folders & bridged.

  On the Options tab of comments, Advanced option, I think, but maybe wrong that this memory Page trimming may create rea/disk writes further that, if you have a slow hard drive in the first place will be just slow it more. This is one of these options that might work for you, or it could slow a little more things up according to specs pc HW host. What you can do if you have more disks is have your guests to reside in a number of disks to balance i/o across.

  These suggestions can be used to both host and guest operating system Windows.

  In the XP Control Panel, System icon, Advanced tab, settings (Performance) button, choose the setting for best performance option. It will take off the ontop of the Basic windows controls MS fancy graphics overlay, so XP will look like for example W2k/ME/98. Also, if you want to run more than one virtual machine at a time in the host the Advanced tab click and change programs at bottom Services.This time slicing CPU so more time CPU is shared with anything else instead of saying 70% of the time CU are accessible for the currently running program. That's what I run on my W7 host because it passes more easily then. Change use of Programsto system Cache memory to agree that it is more dependent of HW. Finally let windows manage its own virtual memory for optimal performance.

  Other things to consider is the indexing disc, view the properties of your hard drive and turn off disk indexing, well as its only supposed to throw to rest its always something else to slow down your machine with as well as other unnecessary programs that run as a service or an application next to the system clock.

  Finally, make sure that your AV scanner comments VM files.

  I think that kind of covers most of the settings, but I'm sure others will know of others.

  Good luck!

• Using HFR - Hyperion Finincal card Score of Performance reporting.

  We try to use HFR with performance scorecard to generate the report. Scorecard of performance create Essbase database which can be directly linked to HFR and report can be generated.
  My question-if we don't have Essbase database for card application performance score how to generate report using Hyperion Financial Reporting Studio.
  How to link to Score of Performance with HFR card application.
  
  Published by: 842804 on August 23, 2011 15:15

  Sorry, I have never developed a report by the Score of RDBMS. EN may not be the right tool for you since it has limited database connections. Have you tried interactive reporting? It is used mainly for reports that are mapped to relational data sources:

  http://download.Oracle.com/docs/CD/E12825_01/NAV/portal_4.htm

  http://download.Oracle.com/docs/CD/E12825_01/EPM.111/ir_studio/launch.html

  See you soon,.
  Mehmet