Option of DAP for the verification of the registry for remote access VPN Anyconnect v 3.0 + users

Hi all

I'm trying to assign the attribute DAP users VPN (Anyconnect 3.0 +) who fulfil certain conditions of registry. When setting up political DAP, while selecting the condition of the register, it is in error as "secure desktop cisco (CSD) is not enabled, CSD should be enabled to configure the registry endpoint attribute. But as I link percevied, to check the attribute registry "scan host' which is integrated in the module anyconnect 3.0 will be charged. So why he asks me to activate the CSD? CSD is really necessary to verify the registry attribute even if we use anyconenct 3.0 +? Any pointer

The end of the ASA must be activated and more bits based on AnyConnect.

Notes elsewhere in the link you quoted, it is said ' host Scan automatically identifies the operating systems and service packs on any remote device establishing a clientless SSL VPN and AnyConnect Cisco client session and when the host Scan/CSD or CSD is activated on the SAA. " (emphasis added).

FYI Cisco is to denigrate these features over time for the Posture of scanning at the ISE in conjunction with the new posture AnyConnect 4.0 module.

Tags: Cisco Security

Similar Questions

  • How to use ACS 5.2 to create a static ip address user for remote access VPN

    Hi all

    I have the problem. Please help me.

    Initially, I use ACS 4.2 to create the static ip address for VPN remote access user, it's easy, configuration simply to the user defined > address assignment IP Client > assign the static IP address, but when I use ACS 5.2 I don't ' t know how to do.

    I'm trying to add the IPv4 address attribute to the user to read "how to use 5.2 ACS", it says this:

    1Ajouter step to attribute a static IP address to the user attribute dictionary internal:

    Step 2select System Administration > Configuration > dictionaries > identity > internal users.

    Step 3click create.

    Static IP attribute by step 4Ajouter.

    5selectionnez users and identity of the stage stores > internal identity stores > users.

    6Click step create.

    Step 7Edit static IP attribute of the user.

    I just did, but this isn't a job. When I use EasyVPN client to connect to ASA 5520, user could the success of authentication but will not get the static IP I set up on internal users, so the tunnel put in place failed. I'm trying to configure a pool of IP on ASA for ACS users get the IP and customer EasyVPN allows you to connect with ASA, everything is OK, the user authenticates successed.but when I kill IP pool coufigurations and use the "add a static IP address to the user 'configurations, EzVPN are omitted.

    so, what should I do, if anyboby knows how to use ACS 5.2 to create a user for ip address static for remote access VPN, to say please.

    Wait for you answer, no question right or not, please answer, thank you.

    There are a few extra steps to ensure that the static address defined for the user is returned in the Access-Accept. See the instuctions in the two slides attached

  • ODA IP ASA when you browse the web via remote access vpn

    Hi all

    I was wondering if it is possible to configure an ASA5510 in a way to allow users remote access VPN use external IP of the ASA when browsing the web. So what I'm looking for is a solution to hide my IP address and use the IP address of the ASA, when browsing.

    The firmware version of the ASA is 9.1 (6)

    Thanks in advance

    Hello

    What you want to achieve is calles u-turn.

    You must enable the feature allowed same-security-traffic intra-interface

    For the configuration of the asa, here's the Cisco documentation (I don't copy paste on the post):

    http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

    Thank you

    PS: Please do not forget to rate and score as good response if this solves your problem

  • Disable XAuth for remote access VPN

    Hi guys,.

    I would like to know if I can jump XAuth for access to remote VPN on a router.

    Here's my config, all working beautifully, always on connection I do not see any window username & password after having clicked on the Vpn profile.

    local VPNUSERSAUTH AAA authentication login
    local AAA VPNUSERS authorization network
    ra-user privilege 0 1cannotTELu secret user name
     
    crypto ISAKMP policy 7
    BA aes
    sha hash
    preshared authentication
    Group 2
     
    Configuration group customer crypto isakmp VPNUSERS
    theKEYallneedt0 key
    VPN-pool
    ACL ACL-SPLIT-VPN
     
    Crypto ipsec transform-set esp-3des esp-sha-hmac 3DES-SHA
    crypto dynamic-map VPNDYNMAP 1
    game of transformation-ESP-AES128-SHA
    market arriere-route
     
    list of authentication of card crypto map-OUTSIDE client VPNUSERSAUTH
    list of crypto card authorization card-OUTSIDE isakmp VPNUSERS
    client configuration address card crypto map-OUTSIDE meet
    card crypto 6500 map-OUTSIDE-isakmp ipsec dynamic VPNDYNMAP
     
    local IP VPN-POOL 10.1.24.1 pool 10.1.24.25
    IP extended ACL-SPLIT-VPN access list
    ip licensing 192.168.11.0 0.0.0.255 10.1.24.0 0.0.0.255
     
    Thank you very much!

    Hi Florin,

    In the case of remote VPN access, the user must be authenticated by name of user and password or certificates.
    You can deploy authentication certificate based as follows: -.
    http://www.Cisco.com/c/en/us/support/docs/security-VPN/IPSec-negotiation-IKE-protocols/22520-unityclient-iOS.html#router-config

    This will use the certificate for authentication of users and only requires name of user and password.

    Kind regards
    Dinesh Moudgil

    PS Please rate helpful messages.

  • How can I assign the static fixed IP for remote access VPN users

    Hi team,

    I have a requirement to assign a fixed static IP users VPN remote access in ASA, please help how I can achice this

    Thanks in advance
    Mikael

    username user1 attributes

    VPN-framed-ip-address 10.200.115.78 255.255.0.0

  • A Site to remote access VPN behind the same public IP address

    Got a problem quite stupid.  We have a VPN from Site to Site configured for a new data center, which will be responsible for general traffic management.  In addition, some users need to use use a VPN client to access certain areas.  The firewall at the Office only has a public IP address, so the two will come to the Site to Site VPN for remote access from the same source.

    This seems a problem with legacy Cisco VPN clients because encryption card matches the entry VPN site-to-site, even if they use VPN clients.  A good/simple solution to solve this problem?

    Some newspapers (198.18.85.23) is the address public IP for the office and the tom.jones is the user.  192.168.1.0/24 is the pool of the VPN client.

    January 7, 2014 19:12:52 ASA5515: % 713130-5-ASA: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, transaction mode attribute unhandled received: 5

    January 7, 2014 19:12:52 ASA5515: % 737003-5-ASA: PISG: DHCP not configured, no viable servers found for tunnel-group "Corp-VPN.

    January 7, 2014 19:12:52 ASA5515: % 713119-5-ASA: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, PHASE 1 COMPLETED

    January 7, 2014 19:12:52 ASA5515: % ASA-3-713061: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, IPSec tunnel rejecting: no entry for crypto for proxy card remote proxy 192.168.1.4/255.255.255.255/0/0 local 0.0.0.0/0.0.0.0/0/0 on the interface outside

    January 7, 2014 19:12:52 ASA5515: % ASA-3-713902: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, error QM WSF (P2 struct & 0x00007fff28dab560, mess id 0x37575f3c).

    January 7, 2014 19:12:52 ASA5515: % ASA-3-713902: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, peer table correlator Removing failed, no match!

    January 7, 2014 19:12:52 ASA5515: % 713259-5-ASA: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, Session is be demolished. Reason: political crypto card not found

    January 7, 2014 19:12:52 ASA5515: % ASA-4-113019: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, disconnected Session. Session type: IKEv1, duration: 0 h: 00 m: 02s, xmt bytes: 0, RRs bytes: 0, right: not found card crypto policy

    January 7, 2014 19:12:53 ASA5515: % 713904-5-ASA: IP = 198.18.85.23, encrypted packet received with any HIS correspondent, drop

    Hello

    Don't know if this will work, but you can try the following configuration (with the rest of the VPN configuration)

    list-access CLIENT VPN ip enable any 192.168.1.0 255.255.255.0

    card crypto OUTSIDE_map 4 is the VPN CLIENT address

    card crypto OUTSIDE_map 4 set peer 198.18.85.23

    card crypto OUTSIDE_map 4 set ikev1 transform-set ESP-AES-128-SHA ESP-3DES-SHA

    The idea would be to have the ACL matches the VPN full Tunnel that the Client attempts to establish. (destination "any" from the point of view of the customer, the ASAs view source)

    I tested briefly on my own SAA by connecting from an IP address to which the ASA offers free VPN in L2L. But as I don't have the operational L2L VPN, I can't really verify the VPN L2L at the moment. Thus, certain risks may be involved if you can afford it.

    -Jouni

  • Remote access VPN with ASA 5510 by using the DHCP server

    Hello

    Can someone please share your knowledge to help me find out why I'm not able to receive an IP address on the remote access VPN connection so that I can get an IP local pool DHCP?

    I'm trying to set up remote access VPN with ASA 5510. It works with dhcp local pool but does not seem to work when I tried to use an existing DHCP server. It is tested in an internal network as follows:

    !

    ASA Version 8.2 (5)

    !

    interface Ethernet0/1

    nameif inside

    security-level 100

    IP 10.6.0.12 255.255.254.0

    !

    IP local pool testpool 10.6.240.150 - 10.6.240.159 a mask of 255.255.248.0. (worked with it)

    !

    Route inside 0.0.0.0 0.0.0.0 10.6.0.1 1

    !

    Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    Crypto-map dynamic dyn1 1jeu transform-set FirstSet

    dynamic mymap 1 dyn1 ipsec-isakmp crypto map

    mymap map crypto inside interface

    crypto ISAKMP allow inside

    crypto ISAKMP policy 1

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 43200

    !

    VPN-addr-assign aaa

    VPN-addr-assign dhcp

    !

    internal group testgroup strategy

    testgroup group policy attributes

    DHCP-network-scope 10.6.192.1

    enable IPSec-udp

    IPSec-udp-port 10000

    !

    username testlay password * encrypted

    !

    tunnel-group testgroup type remote access

    tunnel-group testgroup General attributes

    strategy-group-by default testgroup

    DHCP-server 10.6.20.3

    testgroup group tunnel ipsec-attributes

    pre-shared key *.

    !

    I got following output when I test connect to the ASA with Cisco VPN client 5.0

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: (4) SA (1) + KE + NUNCIO (10) + ID (5), HDR + VENDO

    4024 bytesR copied in 3,41 0 seconds (1341 by(tes/sec) 13) of the SELLER (13) seller (13) + the SELLER (13), as well as the SELLER (13) ++ (0) NONE total length: 853

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, SA payload processing

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ISA_KE

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, nonce payload processing

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received xauth V6 VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, DPD received VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received Fragmentation VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received NAT-Traversal worm 02 VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, the customer has received Cisco Unity VID

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, connection landed on tunnel_group testgroup

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA payload processing

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA proposal # 1, turn # 9 entry overall IKE acceptable matches # 1

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build the payloads of ISAKMP security

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building ke payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building nonce payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for answering machine...

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of payload ID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of Cisco Unity VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing payload V6 VID xauth

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building dpd vid payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing the payload of the NAT-Traversal VID ver 02

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of Fragmentation VID + load useful functionality

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, send Altiga/Cisco VPN3000/Cisco ASA GW VID

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR SA (1) KE (4) NUNCIO (10) + ID (5) + HASH (8) + SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) total length: 440

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + HASH (8) + NOTIFY (11) + NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) overall length: 168

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, useful treatment IOS/PIX Vendor ID (version: 1.0.0 capabilities: 00000408)

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, the customer has received Cisco Unity VID

    Jan 16 15:39:21 [IKEv1]: Group = testgroup, I

    [OK]

    KenS-mgmt-012 # P = 10.15.200.108, status of automatic NAT detection: remote end is NOT behind a NAT device this end is NOT behind a NAT device

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, empty building hash payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash qm

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 72

    Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 87

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): enter!

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, transformation MODE_CFG response attributes.

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = authorized

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = authorized

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized primary WINS

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized secondary WINS

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Compression IP = disabled

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling political = disabled

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: setting Proxy browser = no - modify

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: browser Local Proxy bypass = disable

    Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, (testlay) the authenticated user.

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

    Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 64

    Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + NONE (0) overall length: 60

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cfg ACK processing attributes

    Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 49ae1bb8) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 182

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, treatment cfg request attributes

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 address!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 network mask!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for DNS server address.

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the address of the WINS server.

    Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, transaction mode attribute unhandled received: 5

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the banner!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting save PW!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: receipt of request for default domain name!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for Split-Tunnel list!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for split DNS!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for PFS setting!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Proxy Client browser setting!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the list of backup peer ip - sec!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting disconnect from the Client Smartcard Removal!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Version of the Application.

    Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Type of Client: Windows NT Client Application Version: 5.0.07.0440

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for FWTYPE!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: request received for the DHCP for DDNS hostname is: DEC20128!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the UDP Port!

    Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets.  No last packet retransmit.

    Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = b04e830f) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84

    Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload

    Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload

    Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets.  No last packet retransmit.

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE has received the response from type [] at the request of the utility of IP address

    Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cannot get an IP address for the remote peer

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE TM V6 WSF (struct & 0xd8030048) , : TM_DONE, EV_ERROR--> TM_BLD_REPLY, EV_IP_FAIL--> TM_BLD_REPLY NullEvent--> TM_BLD_REPLY, EV_GET_IP--> TM_BLD_REPLY, EV_NEED_IP--> TM_WAIT_REQ, EV_PROC_MSG--> TM_WAIT_REQ, EV_HASH_OK--> TM_WAIT_REQ, NullEvent

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE AM Responder WSF (struct & 0xd82b6740) , : AM_DONE, EV_ERROR--> AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL--> AM_TM_INIT_MODECFG_V6H NullEvent--> AM_TM_INIT_MODECFG, EV_WAIT--> AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG--> AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK--> AM_TM_INIT_XAUTH_V6H NullEvent--> AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b ending: 0x0945c001, refcnt flags 0, tuncnt 0

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending clear/delete with the message of reason

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing the payload to delete IKE

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

    Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 9de30522) with payloads: HDR HASH (8) + DELETE (12) + (0) NONE total length: 80

    Kind regards

    Lay

    For the RADIUS, you need a definition of server-aaa:

    Protocol AAA - NPS RADIUS server RADIUS

    AAA-server RADIUS NPS (inside) host 10.10.18.12

    key *.

    authentication port 1812

    accounting-port 1813

    and tell your tunnel-group for this server:

    General-attributes of VPN Tunnel-group

    Group-NPS LOCAL RADIUS authentication server

    --
    Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
    http://www.Kiva.org/invitedBy/karsteni

  • Implementation of the remote access VPN IPSec using SRI 2801

    Hello

    I tried to set up a VPN for remote access using 2801 SRI. I've been able to establish my house vpn tunnel using the DSL (behind a NAT) connection, give it SRI the IP address that is in the ip pool I configured on safety. The problem I have right now is that it does not reach the company LAN network.

    DIAGRAM:

    MODEM PC (VPN CLIENT) ADSL - ROUTER SOHO - INTERNET - ISR2801 - LAN---(10.10.0.27&192.168.0.9) COMPANY

    PC: 172.16.10.122

    SOHO ROUTER LAN IP: 172.16.10.254

    SOHO ROUTER WAN IP: Dynamically assigned by ISP

    ISR2801 WAN IP: x.x.x.5/224

    IP LAN ISR2801: 10.10.0.50/24

    The CORPORATE LAN subnet: 10.10.0.0/24 and 192.168.0.9/24

    2801 SRI CONFIGURATION:

    AAA new-model

    !

    !

    connection of AAA NOCAUTHEN group local RADIUS authentication

    local NOCAUTHOR AAA authorization network

    !

    !

    IP domain name xxxxx.com

    !

    !

    !

    username root password 7 120B551806095F01386A

    !

    !

    crypto ISAKMP policy 3

    BA 3des

    preshared authentication

    Group 2

    ISAKMP crypto 5 40 keepalive

    ISAKMP crypto nat keepalive 20

    !

    Configuration group isakmp crypto-GROUP NOC client

    touch [email protected]/ * /! ~ $ 9876 qwerty

    DNS 192.168.0.9

    192.168.0.9 victories

    xxxxx.com field

    LWOP-pool

    include-local-lan

    netmask 255.255.255.0

    !

    !

    Crypto ipsec transform-set AC - SET esp-3des esp-sha-hmac

    !

    dynamic-map crypto NOC-DYNAMICMAP 10

    transformation-LWOP-SET game

    !

    !

    list of crypto AC-customer card NOCAUTHEN card authentication

    list of crypto isakmp NOCAUTHOR AC-card card authorization

    crypto map CNP-map client configuration address respond

    Crypto map AC - map 10-isakmp dynamic ipsec AC-DYNAMICMAP

    !

    !

    !

    !

    interface FastEthernet0/0

    IP address x.x.x.5 255.255.255.224

    Speed 100

    full-duplex

    card crypto AC-map

    !

    interface FastEthernet0/1

    IP 10.10.0.50 255.255.255.0

    Speed 100

    full-duplex

    !

    local IP NOC-POOL 192.168.250.101 pool 192.168.250.110

    IP route 0.0.0.0 0.0.0.0 XXX1

    IP route 10.10.0.0 255.255.255.0 10.10.0.10

    IP route 172.16.10.0 255.255.255.0 FastEthernet0/0

    Route IP 192.168.0.0 255.255.255.0 10.10.0.10

    IP route 192.168.250.0 255.255.255.0 FastEthernet0/0

    !

    I have attached a few screenshots. My goal here is to have access to my LAN to the company (10.10.0.0/24 and 192.168.0.9/24). I don't know what is missing here.

    No, we don't need not NAT. wanted to confirm if NAT could cause this problem.

    The config looks good. Can you ping routers ip internal interface the client LAN once it connects?

    Are correct, w.r.t. transatlantic lines reaching pool behind router VPN?

    If so, I would like to take a look at the exits following when a client is connected.

    See the crypto eli

    ISAKMP crypto to show his

    Crypto ipsec to show his

    SPSP

  • The Routing and remote access could not start, error 214500037 (0x80004005)

    My windows server 2003 r2, failed to start the Routing and remote access services. And in the event an observer log, it has error code
    Event ID: 7024, with service specific error 2147500037 (0x80004005)
    I tried to reset tcp/ip and replace ias.mdb and dnary.mdb by a new, but it did not work.

    Thank you

    Hi budhihartono,

    Since you are facing problems with windows server 2003 r2, it would be better suited in the Technet Windows forum. Please post your question in the following TechNet Windows server forum to improve assistance:

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  • Unable to SSH/telnet through the remote access VPN to ASA interface

    Hi all - im trying to SSH/telnet to my ASA in my remote access VPN tunnel but

    can't get this to work.  what Miss me?

    remote access VPN subnet: 192.168.25.0

    LAN subnet: 192.168.1.0

    config is attached.  THX-

    Please enter the command

    Private access Managament

    and you will be able to telnet/ssh to the asa on this ip 192.168.1.253

  • How to prohibit remote access vpn client to use the local DNS server

    Hello

    I'm on ASA5505 remote access vpn configuration.

    Everything works fine so far, except when the client got connected, he always used the local DNS server provided by the ISP.  How can I force the customer to use the DNS server configured on ASA?

    Thank you.

    Kind regards

    The command "Activate dns split-tunnel-all" is supported only on SSL VPN and VPN IKEv2. Since you're using IKEv1, this command is not supported.

    Here's the order reference:

    http://www.Cisco.com/en/us/docs/security/ASA/asa82/command/reference/S8.html#wp1533793

    You configure no split tunnel? If you are, then you need to configure "tunnelall" split tunnel policy, and that will force the dns resolution and everything else through the VPN tunnel.

  • AnyConnect 3.0 supports IPSec VPN for remote access?

    Hello world

    I've read about Cisco AnyConnect 3.0 issues that it supports IPSec VPN for remote access:

    http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps6032/ps6094/ps6120/qa_c67-622477_ns1049_Networking_Solutions_Q_and_A.html

    I downloaded and installed the Client AnyConnect Secure Mobility Client 3.0.0629, but I'm not able to get the IPSec VPN works. Also, it has no option to use the previous of Cisco IPSec VPN client PCF files.

    Can someone point me in the right direction to get IPSec VPN AnyConnect 3.0 work?

    Thank you in advance!

    Hello

    Takes AnyConnect support IPSEC from version 3.0, but only in combination with IKEv2.

    There is no option to use a CPF file with it and the config should be pushed through a profile Anyconnect.

    More information on this:

    http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect30/Administration/Guide/ac02asaconfig.html#wp1325361

    You should also change the ASA config so that it accepts negotiations IKE v2:

    http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/vpn_ike.html#wp1144572

    Kind regards

    Nicolas

  • ASA 5510 VPN for remote access clients are asked to authenticate on box

    Don't know what's the matter, but my remote access users are invited to join the ASA before connecting to the tunnel. How can I disable this? Config is attached. Thank you all -

    For remote access connections, you can turn off the prompt xauth (user/pass) with the following:

    Tunnel ipsec-attributes group

    ISAKMP ikev1-user authentication no

    -heather

  • Server ezvpn 887 router for remote access

    Hello.

    I'm having a problem with the implementation of remote access using easyvpn server on a router 887.  I followed the tutorials and also used Assistant cisco configuration professional easyvpn server to the configuration but still having a problem.

    I see, but Phase 1 finished, Phase 2 will fail with the following error...

    09:43:26.515 Oct 10: ISAKMP: (2003): check IPSec proposal 8

    09:43:26.515 Oct 10: ISAKMP: turn 1, ESP_AES

    09:43:26.515 Oct 10: ISAKMP: attributes of transformation:

    09:43:26.515 Oct 10: ISAKMP: authenticator is HMAC-SHA

    09:43:26.515 Oct 10: ISAKMP: key length is 128

    09:43:26.515 Oct 10: ISAKMP: program is 1 (Tunnel)

    09:43:26.515 Oct 10: ISAKMP: type of life in seconds

    09:43:26.515 Oct 10: ISAKMP: service life of SA (IPV) 0x0 0 x 20 0xC4 0x9B

    09:43:26.515 Oct 10: ISAKMP: (2003): atts are acceptable.

    09:43:26.515 Oct 10: IPSEC (validate_proposal_request): part #1 the proposal

    09:43:26.515 Oct 10: IPSEC (validate_proposal_request): part #1 of the proposal

    (Eng. msg key.) Local INCOMING = 88.xx.xxx.174:0, distance = 80.177.185.185:0,.

    local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),

    remote_proxy = 192.168.21.12/255.255.255.255/0/0 (type = 1),

    Protocol = ESP, transform = NONE (Tunnel),

    lifedur = 0 and 0kb in

    SPI = 0 x 0 (0), id_conn = 0, keysize = 128, flags = 0 x 0

    09:43:26.515 Oct 10: map_db_find_best found no corresponding card

    09:43:26.515 Oct 10: IPSEC (ipsec_process_proposal): proxy unsupported identities

    09:43:26.515 Oct 10: ISAKMP: (2003): IPSec policy invalidated proposal with error 32

    'Proxy unsupported identities' research indicates a NAT problem maybe, but I don't see where this would be.  In my view, the problem is elsewhere.

    I use the VPN Client 5.0.07.0440 and using transparent tunneling IPSec (on TCP/10000) that the client is located behind a firewall/NAT device.

    Does anyone know what may be the issue?  Attached full config.

    Hello Mick

    Before that, one more try. .

    Remote control the pfs as follows

    Profile of crypto ipsec RemoteAccess

    no set pfs group2

    Remove and add the virtual model crypto back

    type of interface virtual-Template1 tunnel

    No ipsec protection RemoteAccess tunnel profile

    Profile of tunnel RemoteAccess ipsec protection

    I hope this will solve your problem

    Henin,

  • Cannot acess System Recovery Options, need help with the registry. Kindly help.

    Hi, sorry for the long question, but please help.

    To start off the coast, one day out of nowhere, my PC showed a "Login process initialization failed" error As a result, I am able to go pass the stage of "Starting Windows" but can't see the login screen. The way to remedy this problem is to restore windows. Now I'm able to reach recovery system (F8) Options, but it does not allow to login me as "admin". As soon as I select the language and keyboard input mode he asks me user name and password. The strange thing is there are two options for the username "admin" and the other is 'Office' (I did not have any accounts with these names). I read an article on the Dell (my pc manufacturer) website that said to log on as an administrator. But the Recovery Options does not give me access as 'admin' for any password I tried. I tried all the standard passwords and password for my account admin on PC (which has not been named admin btw). I also tried to leave it blank, but Recovery Options points out "the user name or password is incorrect" every time. Now, I tried to find a way to work around and reached here

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/cannot-access-system-recovery-console-invalid/7ff2b01b-9D30-4E10-94a3-bf73a3c5f253?page=1&tab=question&status=AllReplies

    I quote an answer ' I ca, however, access the Recovery Console: . 
    I found a tweak on the Internet to change the registry for a password is not necessary to enter the Recovery Console. I proved that this tweak works as expected by switching between the registry by default DWORD definition ('0') and the twisted DWORD setting ('1').  When the DWORD value is set to '1' I can access all the functions of the Console recovery, but when the value of the default value of '0' without password allows access to the Recovery Console.  The tweak I used is as follows:

    ---
    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\setup\recoveryconsole]
    "securitylevel" = DWORD: 00000001
    "setcommand" = DWORD: 00000000
    ---

    The DEFAULT value"securitylevel" = DWORD: 00000001 '00000000' is (zero).  Note that all tests, as described above has been completed with the default setting for this registry entry.

    While being able to access the recovery with twisted recording Console... »

    Please just help me to implement this tweak. How can I access registry without the need to log in.

    Sorry for these elaborate details, I didn't want to leave anything. Thanks in advance.

    The way to remedy this problem is to restore windows.

    It is correct. To call the system restore, follow these steps:

    1. Use your repair Windows CD to start the computer in Windows Repair Mode. You will not have a password.
    2. Use the system restore to solve your problem.
    3. Plan in advance and create, test and document a spare, even admin account that you have a spare House key. On behalf of alternatives would easily get around your current situation.

    If you do not have a CD to repair Windows, ask a friend to burn you through the control panel / backup and restore.

Maybe you are looking for

  • Emoji predictive isn´t work

    Hello! Today I updated my iPhone IOS 10 5 and I noticed that when writing simple words like 'Apple' or 'Hi!' they don t get "emojified". I have a mini iPad 2 with iOS 10 too and predictive emojis arises. I did a little research and found this... http

  • change the copy quality of 2540

    You can change the quality of the copy of the 2540?  I copy the very generic forms which do not need to be of high quality, and I'd love to save a bit of ink.  When I print the documents, I have the option to select "draft".  Is there a similar featu

  • Photosmart c7280 LCD needs to update, HOW?

    How to update the list of the LCD for a HP photosmart c7280?

  • I wonder to check for a verification code.

    I get a message saying that I need to write code that was sent to my other e-mail account.  When I go to my other e-mail account the message Code says: It is a verification code, not a password. If you do not request this code, someone else might kno

  • Help with Hard Drive and registry

    Hey, it kinda turns out to be a long and difficult history, but I recently had a small problem that spread to a problem much bigger (and catastrophic). I had a problem with freezxing on my laptop (HP Pavilion Dv5 with the 64-bit version of Vista I th