Options Hot Sync problem

Similar Questions

• Hot sync problem during the transition to the new PC (Tx)

  I have a Tx six - months old, use exclusively the Palm Desktop (not Outlook on my PC). I have had no problems HotSync with my PC... until the hard drive crashed two weeks ago. I've been actively using my computer to Pocket during these two weeks and have now a new PC I want to synchronize with. PC running Windows XP Professional Service Pack 3.

  I installed PalmDesktop 6.2.2 with related Hot Sync Manager. I moved over my data files (e.g. backups) of the old hard drive (maybe I should not have?) When I took office, I jumped the sync bit, since I didn't have a user name and has not been implemented in a new handheld device. I tried to do as well a regular synchronization and a sync with dominant desktop pocket. The two of them start well, but then after a LONG wait, seems to hang on the synchronization of calendar. I gave him several minutes... the two times the app just froze and I had to cancel soft task palm and end on the desktop. I looked in the Safe Sync Hot, but it starts with a 'you will now lose all of your data due to a total reboot so be sure to hot sync first... '. ' - which is hardly useful since it is the HotSync I can't do!

  Suggestions on what to try? I'm desperate to be able to reuse my office - I HATE Graffiti 2 and it takes me forever to the entrance of the things on the handheld.

  Thank you!

  If the synchronization is suspended a particular category of PIM, it ususally indicates corruption in the database.

  There may be the database at the source of the problem. Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will search the database and then to declare the corruption. You can then search records at the origin of the problem and fix them yourself or you can buy the program and do it automatically repair records.

  http://www.pimlicosoftware.com/dbfixit.htm

  Once you correct the records on the handheld, set the Pocket lines replaces nand Office data synchronization corrected back to the PC.

  Message relates to: Palm i705

• M515 Hot sync problem Windows xp pro palm1 software

  Ok. This m515 has my brothers and my first.

  Ive read through the forums trying everything proposed to get the m515 hotsync with xp.

  Windows xp pro, mem 4 concerts, 700 gigs HD space, CPU 2.1gig.

  I'm using the palm1 software and want the address book transfer.

  have hotsync manager running and I get a popup 'window hotsync', but none of the data from the Palm1 software (downloaded from the website of palm) is transferred.  Yes, the power plug and the USB is plugged.

  515 Hotsync shows long ok calendar, AddressBook etc...

  yet data will not be transferred.

  Any help apprecated. Thank you.

  AH!, it wasn't her, but he helped me to find the problem!

  There is a page of settings where it sets the sync, either IR or via cradel/modem...

  He was set to go through the Infra-red.

  I changed the setting to the cradle/modem and it Sync for the first time.

  Grand... Thank you! Had, it works...

  Message relates to: Palm m515

• hot sync problem - Date Palm Z22 - hold on synch book...

  I have a palm Z22.   I got it for several years.  Recently, I downloaded 6.2.

  When I hotsync, everything happens as it should, but it freezes on the synchronization of the agenda.

  Here's what happens in a second nano:

  Installer package

  Install

  Install the Service models

  Install on map

  Synch warm Exchange

  It date Book - aways stops here... 13 green bars, all 2 of 12.

  Does anyone know how to fix?

  Thank you

  SDM

  I have exactly the problem you have described on my Centro.  Looking through the other posts, I found a suggestion to install a program on your handheld called dbfixit.  It's free on cnet.  When you run it, it will not correct the errors (at least the free version won't), but it will tell you what are the mistakes.  If you look at the errors, it will give the date of the registration.  I had a few old calendar entries that had been corrupted.  I deleted them and then the sync works perfectly.  I hope this helps.

• Tear out my hair with Hot sync problems!

  I did some research and I can not get my Z22 palm to sync with Palm by Access (this is my new laptop running Windows Vista 64-Bit).  I bought and installed a USB infrared adapter (as suggested).  First, an error occurs that is used by another application.  Brought some changes now, the error is "the connection between your device and the desktop could not be established. Please check your set... «... I don't have any leads for a solution to my situation, and I'm very frustrated.  Can someone please help me get my palm sync new!  I currently use my z22, but nothing I can not back up or otherwise.  And I refuse to buy an another PDA.

  Help me! Someone? Anyone?

  I read this thread, and it directly affects how I came to buy a USB for IR adapter.  I can't work, no matter what the conversations are pass.  I just need someone to scroll me through each process as best as possible.  After I added the update palm software, shouldn't be able to sync without worrying if my previous information was never stored on my new laptop?  Please help me, I am very frustrated and lose hope and the thought that I have to buy a new Palm (which I don't really want to do now).  Thank you.

  Message relates to: Palm Z22

• hot sync problem

  I can't hot synch. I get the message "Unable to establish connection" I have a tungsten E pDa and it worked fine until I uploaded in the PDA support photo which I did have.

  It didn't work anymore. I think I can have contaminated the DDA software. I followed the thread for Windows XP Home Edition and reinstalled the latest palm desktop and hot synch and it still does not work.

  If I do a hard reset which will restore all the original PDA software so I can start over?

  Other suggestions are welcome.

  Thank you

  Ziller

  Thank you.

  I've removed any vestige of the Palm of my computer and then reinstalled the Palm desktop and software HS and all seems to work. You saved me from a hard reset to unnecesswary.

  Thanks again.

  Ziller

  Message relates to: Tungsten E

• Palm TX + Vista Hot Sync problem

  I downloaded the Desktop 6.2.2 version and installed Docs to go worm. 10.002 on my Vista laptop.  When I try to HotSync, the Palm stops and restarts without HotSync.  Can't HotSync with my old XP machine and the worm office. 4 1-2.

  Hard reset worked.  Thanks for your help.

  Message relates to: Palm TX

• Zire hot sync

  Hello

  I'm having a hot-sync problem from my computer palm zire with my new computer Inspiron 1546, 64-bit, with a home premium to windows 7.

  Running hot Sync Manager I have the icon on the bottom bar of the right tool in the system tray is a USB and it is checked.

  When I enter all upwards in the system at the end of a synchronization operation hot tray a failure box appears.

  That is the selected port COM1 is not available at this time. HotSync manager will open the port when it becomes available. the premises of the port series is empty and I can't get into something is where COM1 should be.

  In the setup of the box I looked into the hot sync LOG this message if poster is. The logfile c:\program (x 86)-palm\johnsw\hotsync journal is not found.

  Hoping you can help me

  With regard to bill johns

  Hello billj, welcome to the Palm support community.

  Your question is asked here, on a daily basis.  I refer you to the thread of fat at the top of this section entitled "Windows7 and Vista synchronization instructions.

  In short, you cannot synchronize via USB to any 64 bit OS.  The company Palm Desktop factory (access to the Japan) seems to have no interest in updating the program to run on this type of operating system.

  WyreNut

• Hot sync and check for problems.

  Hi, I have just a basic knowledge of the treo and my pc. My pc has windows vista and has been hot sync with my treo680 without any hazzle. But recently, he stopped all hotsync. It shows just a last message to hot sync. I use the hot sync cradle but I can't launch it with the key. Another curious thing is that I can no longer use the search engine on the treo.

  I tried to disable the firewall; but it has not changed anything. Any other suggestions... Anyone who could me help out me. Thank you very much.

  Hello

  I'm starting to believe in miracles.  I have reinstall my old palm desktop version 4.2 with ver 4.1.2.  As part of the registration process I had to remove the battery and restart again palm treo.  This solves the problem and search function is thus restored.

  Thought that put this line for enemies like me.

• Hot Sync on trip options

  I don't remember how to put my computer more mount my camera during the hot sync. Can someone please help with this?

  In your Hotsync Manager 4.x you would go to the custom and set lines Office replaces handheld. If you use Palm Desktop 6.2.2 you go into settings > Applications, then choose the lines, then assign lines Desktop replaces the handheld computer. Do not choose to set as default, or it will stay in this State.

• placing the hot Sync Manager on systray

  Until recently, the logo hot sync will automatically appear in my systray. Recently, it has been necessary for me to open it manually. Is it possible to get it again in automatic mode? Installation shows 'always available', but it is not.

  Paulbear

  I'm sorry to learn that your encounter this problem. To work around this problem is by going to the settings of the hotysnc Manager and selecting the option for the hotsync Manager manually start upward, applies the changes and then click ok. Then return to the hotsync Manager settings and change the settings back to start (or make them available always) then select apply changes, and then click ok.

  Message edited by Palm_Lover on 08/04/2009 16:48

• Tungsten T3 Hot Sync in Windows 7 Ultimate 64-bit and WIndows XP mode

  I've upgraded to Windows 7 Ultimate 64 bit and now my Palm T3 will not be synchronized.  I downloaded desktop 4.1.4e 6.3 and 4.1.4. I tried all three in both windows 7 and windows XP mode that tells me is a 32-bit o/s but I'm really not sure.  I tried to hot sync in bluetooth in windows 7, as the T3 and laptop connect but he always tells me that the port is used by another program? Does anyone know what I have to do to get it to sync or am I've sentenced to throw my faithful T3 out? Any ideas?

  Hello eaglesfan723 and welcome to the forums of Palm.

  The Tungsten T3 HotSync driver is not 64-bit capable, this is why you can't get the T3 to HotSync.  Please read this thread to learn more about your options with Windows 7.

  Alan G

• Sony clie hot-sync with Palm desktop on Vista (32 bit)

  I got my Clie TH-55(Palm OS 5.2.1) for some time now, say 2 years, but recently, I made the switch to Vista (not by choice, I got a new laptop for free). I had been synchronize my CLIÉ Palm Desktop and so when I got my new laptop, I went and download desktop 4.1.4e in the hopes that I could continue the sync on vista. The installation went well, it is, I can do a hot sync but none of my data transfers. If I create a new contact on my handheld, it will not be displayed on the desktop and even vice versa. When I check the hot sync log, it says that there are no errors. I didn't know if I should go to the forums of Palm or Clie forums so I apologize if this is no longer a Clie problem which should be in the forums of clie. Thanks in advance...

  
  

  Message relates to: None

  I found the problem, it had to do with the running of the Office to palm as an administrator. Once that I thought that was the problem, I put it to always run as administrator.

• Double list appointments on nursery hot sync

  For some reason, my hot sync hangs up on the Agenda because it is listed twice and therefore allows to synchronize the first and stuck on the second and I have to finish with the Task Manager and unplug the Centro to break out of a loop is in.  It comes from start so not sure what is happening.  Worked fine at first. If anyone can help... I have a Centro and am using Windows XP Pro and try to sync it with my Palm Desktop.

  Only a configuration option for each pipe in the hot Sync Manager so I can not uncheck.  Finally, I went in the chat room and ended up after a lot of time to do a hard reset and it seems to work at the moment but double pipes still show in the hot box sync so it can reproduce.  Thanks for all your help.  I can just pay for the dbfixit and try that again.

  Message relates to: Centro (Verizon)

• Palm Z22 unable to hot sync to computer vista laptop WHY

  I have a Palm Z22 and a Tungsten handheld device.  Last year, I bought a laptop with the vista operating system.  I was not able to sync hot or the other device to my computer.  Tried to download the updated drivers, but NO LUCK.  What can I do?

  Hello Deborah Mr. Williamson.

  1. what exactly happens when you try to synchronize these devices?

  2. you receive messages or error codes?

  You can check out the following link and try the instructions of troubleshooting for Palm and tungsten:

  http://KB.Palm.com/wps/portal/KB/common/article/2630_en.html

  http://KB.Palm.com/wps/portal/KB/na/Tungsten/E2/unlocked/solutions/article/2630_en.html

  Also check out the following link:

  The problems of synchronization

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-sync-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.