ORA-06565: cannot run the ROLE VALUE from stored procedures
Hello!I'm trying to call a procedure from a function. Among the statements in the procedure stored is of dbms_session.set_role ('HAVE');
I get the error "Cannot run a DEFINED ROLE less stored proceduers". I joined the call in an anonymous block above, but the error still exists.
Any idea will really help me.
Thank you
>
I'm trying to call a procedure from a function. Among the statements in the procedure stored is of dbms_session.set_role ('HAVE');
I get the error "Cannot run a DEFINED ROLE less stored proceduers". I joined the call in an anonymous block above, but the error still exists.
Any idea will really help me.
>
This will work only if the procedure is defined for the APPELLANT's rights.
Roles are disabled in named PL/SQL blocks unless you use of the APPELLANT's rights by setting the code with AUTHID CURRENT_USER.
The Oracle documentation provides a very clear explanation - based restriction is for the NAMED PL/SQL blocks rights DEFINER of this use (the default):
>
Roles used in the appointed with rights to define blocks
All roles are disabled in any PL/SQL block named (stored procedure, function, or trigger) that runs with the rights of the author. Roles are not used to privilege control, and you cannot define roles within the procedure of a DEFINER rights.
>
The database Security Guide has the information in the section "operation of the roles in PL/SQL blocks (which, of course, wouldln was necessary if they didn't work.).
http://docs.Oracle.com/CD/B28359_01/network.111/B28531/authorization.htm#i1007304
>
The use of roles in a PL/SQL block depends on if it is an anonymous block, or a block named (stored procedure, function, or trigger), and if it runs with the rights of the author or the rights of the applicant.
Roles used in the appointed with rights to define blocks
All roles are disabled in any PL/SQL block named (stored procedure, function, or trigger) that runs with the rights of the author. Roles are not used to privilege control, and you cannot define roles within the procedure of a DEFINER rights.
The SESSION_ROLES view shows all roles that are currently enabled. If a named PL/SQL block that runs with DEFINER SESSION_ROLES rights issues, the query returns no rows.
See also:
Oracle database reference
Roles used in blocks named with the rights of the plaintiff and anonymous PL/SQL
Named PL/SQL blocks that run with the rights of the applicant and the anonymous PL/SQL blocks are executed at the end of the privileges granted through active roles. Current roles are used for verification within rights Summoner of privilege the PL/SQL block. You can use dynamic SQL statements to define a role in the session.
Tags: Database
Similar Questions
-
Run the statement in a stored procedure with Out parameters and
Hi all
I have a stored procedure that calls a select statement. Here it is...
CREATE OR REPLACE PROCEDURE BLABLA_VIEW_PROCEDURE
* (BLABLA_KEY IN NUMBER, *)
XML_OUTPUT ON VARCHAR)
AS
BEGIN
SELECT SYS. XMLTYPE.getStringVal (OBJECT_VALUE) in XML_OUTPUT FROM BLABLA_VIEW WHERE extractValue (OBJECT_VALUE, ' / BLABLA_TYPE/BLABLA_KEY ') = 2876;
END;
Is to have both IN and OUT parameters as described above. I am able to compile and run the procedure.
The problem I want to share with everyone is...
I want to run the stored procedure together with a single EXEC command.
I tried different ways using the EXEC command but of no use.
Could someone help me?
Thanks in advance.
Published by: user10763276 on June 3, 2010 15:47Please visit the following...
sudhakar@ORCL>CREATE OR REPLACE PROCEDURE BLABLA_VIEW_PROCEDURE 2 (BLABLA_KEY IN NUMBER, 3 XML_OUTPUT OUT VARCHAR) 4 AS 5 BEGIN 6 XML_OUTPUT := BLABLA_KEY || ' and whatever else...'; 7 END; 8 / Procedure created. sudhakar@ORCL> sudhakar@ORCL>var XML_OUTPPUT varchar2(100); sudhakar@ORCL>exec BLABLA_VIEW_PROCEDURE (9151, :XML_OUTPPUT); PL/SQL procedure successfully completed. sudhakar@ORCL>print XML_OUTPPUT; XML_OUTPPUT -------------------------------------------------------------------------------- 9151 and whatever else... sudhakar@ORCL>
Post tells you...
var OUTPUT VARCHAR exec BLABLA_VIEW_PROCEDURE (9151, :OUTPUT); print OUTPUT
VARCHAR is not a valid TYPe to declare. Use VARCHAR2 (nnn) where nnn is a number.
VR,
Sudhakar B. -
How to return a value from stored procedure.
Hello
I have an insert in which insert a username through generated sequence number.
I need this generated sequence number stored procedure return.
Kindly help me to achieve this goal.
It might be useful if there is a code sample for the same thing.
Thank you
Ahmed ShareefuddinSomething like this:
create or replace procedure xproc (num out number) is begin insert into mytab values (myseq.nextval); select myseq.currval into num from dual; end; /
Max
http://oracleitalia.WordPress.com -
I am running windows XP Pro and am unable to open any programs at all. I was uninstalling some programs add and remove applications in Control Panel and I think I deleted a necessary program, file or something because right afterwards none of files or programs would be open. I get the error the file extension that is not associated with this file. I can't open the system restore program to restore the computer to an earlier configuration. I tried to get a regestry cleaner to fix regestery errors, but none of those I work. I am able to get on the internet and e-mail but am afraid the computer because it cannot be started again. I tried to load a regestery cleaner from the internet but nothing will load or run it. Help! I also tried to change the program that opens files, but went wrong, and now all files are associated with windows internet explorer 8. I have no idea how I did all this and come back to this computer from the place of the computer because the old hard drive died on me and they put in another. It was working fine until I felt the need to clear up disk space and delete some old programs. I'm sure I messed up and deleted a file that was necessary to open others. I don't have the XP disk to try a fix and nothing in the pages of microsoft download will run. Oh please I don't want to take that back to the computer type that will charge me an arm and a leg. I just made him pay $ 200 last week. Any help will be great.
Hello
· Do you have an error message when you try to perform the system restore?
Follow these methods and check if that helps.
Method 1:
Step 1:
Follow the troubleshooting steps form the article and then try to perform the system restore and check if it helps.
How to change or choose the program that starts when you double-click a file in Windows XP
http://support.Microsoft.com/kb/307859
Step 2:
Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
http://support.Microsoft.com/kb/302796
Method 2:
If the problem persists, I suggest that you try to perform system restore in Safe Mode and check if it helps.
How to restore Windows XP to a previous state
-
Cannot run the file EXE from CDROM
I can't run a SETUP program. EXE file to the CD-RW/DVD drive (SD-R2412). OS is WIN XP Pro SP2. On other computers on the same (commercial software) CDROM can be isntalled.
There is no problem to see the CD and it's fight on 'My Computer', and I can load readme.txt and other files - same run .avi from that CD.
Only the Setup file (and the Autorun file) do not work.What's wrong?
Hello Bernd
If you want to check this Microsoft document http://support.microsoft.com/kb/218617/ please. It will be interesting to know if there is a problem with just this one CD.
-
roles authenticated using stored procedures does not...
Mr President.
See the steps I went through that
create user100 user identified by 123;
create user101 user identified by 123;
Grant create session, create role, create the procedure to user100;
Grant connect to user101;
change the quota of the user user100 10 M on users;
grant create table to user100 with admin option;
Conn user100/123
create or replace procedure settingrole as
Start
dbms_Session.set_role ('dummy');
end;
/
create the dummy role identified using user100.settingrole;
grant create table to dummy;
Grant execute on settingrole to user101;
Conn user101/123
execute user100.settingrole;
now the error I get is ora-06565 cannot run set role in stored procedures
ORA-065512 to the sys.dbms_session line
can u help me please how to do this jobYou must create the procedure with the right of the applicant (article AUTHID CURRENT_USER). See more on the secure application role http://download.oracle.com/docs/cd/B28359_01/server.111/b28337/tdpsg_privileges.htm#CIHHGDAE tutorial
-
ORA-22992: cannot use LOB Locators selected from the remote tables...
Oracle 10.2.1.0.4
Solaris 10
We try to access a table in another database via a db_link.
The table we are trying to access has a LOB.
We get the following error: ora-22992: cannot use LOB Locators selected from the remote tables.
Is there a way to get around this? We need the data in the BLOB field.
Thank you.See on metalink:
ORA-22992 has a workaround solution in 10 gr 2
DOC - ID: 436707.1Werner
-
ORA-19504: cannot create the file '+ DATA '.
Hello everyone.
This is the scenario:
We have a test server that is used to restore daily backups of the Production database. Restore us the database with the same SID as the production one.
For specific reasons, we need create a second database (with a different SID) on this server with an older backup from the production one. To realize that I'm trying to use a part of the "DUPLICATE without connection to the target" tutorials on the web.
I tried the simple guide that I found which is:
(1) copy the backup files cold /somedirectory
(2) start OLD database with nomount
(3) connect RMAN with OLDER as an auxiliary
(4) run the following: DUPLICATE DATABASE FOR OLD BACKUP LOCATION ' / somedirectory' NOFILENAMECHECK.
Here's the result (I deleted some lines because of the size of it):
----------------------
RMAN > ProdDB to OlderDB DUPLICATE DATABASE
2 > LOCATION of BACKUP "/ home/oracle/OlderBackupFiles.
3 > NOFILENAMECHECK.
4 >
From October 1, 14 Db double
content of Script memory:
{
clone of SQL 'alter system set control_files =
"+DATA/OlderDB/controlfile/current.829.859839217" comment =
' Set by RMAN "scope = spfile;
clone of SQL 'alter system set = db_name
"ProdDB" comment =
' Modified by RMAN duplicate "scope = spfile;
clone of SQL 'alter system set db_unique_name =
"OlderDB" comment =
' Modified by RMAN duplicate "scope = spfile;
clone to stop immediately;
Start clone force nomount
Restore controlfile primary clone of ' / home/oracle/OlderDB/controlfile_ProdDB_20141001_4159.bkp';
change the clone database mount;
}
execution of Script memory
SQL statement: alter system set control_files = comment "+DATA/OlderDB/controlfile/current.829.859839217" = "defined by RMAN" scope = spfile
SQL statement: change the system db_name set = comment "ProdDB" = "modified by RMAN duplicate" scope = spfile
SQL statement: alter system set db_unique_name = comment "OlderDB" = "modified by RMAN duplicate" scope = spfile
(...)
From restoration to 1 October 14
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID = 191 type device = DISK
channel ORA_AUX_DISK_1: restore the control file
channel ORA_AUX_DISK_1: restoration complete, duration: 00:00:03
output file name=+DATA/OlderDB/controlfile/current.829.859839217
Restoration finished in October 1, 14
mounted database
output channel: ORA_AUX_DISK_1
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID = 191 type device = DISK
content of Script memory:
{
until the SNA 274262921.
the value of newname for datafile clone 1 again;
the value of newname for datafile clone 2 again.
the value of newname for datafile clone 3 again.
the value of newname for datafile clone 4 new ones;
the value of newname for datafile clone 5 again.
the value of newname for datafile clone 6 again.
the value of newname for datafile clone 7 again.
restoration
database clone;
}
(...)
From restoration to 1 October 14
using the ORA_AUX_DISK_1 channel
channel ORA_AUX_DISK_1: from the restore backup set data file
channel ORA_AUX_DISK_1: specifying datafile (s) to restore from backup set
channel ORA_AUX_DISK_1: restore datafile 00001 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00002 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00003 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00004 in + DATA
channel ORA_AUX_DISK_1: restore datafile 00005 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00006 to + DATA
channel ORA_AUX_DISK_1: restore datafile 00007 to + DATA
channel ORA_AUX_DISK_1: reading from the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece
channel ORA_AUX_DISK_1: ORA-19870: error when restoring the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece
ORA-19504: cannot create the file '+ DATA '.
ORA-17502: ksfdcre:4 cannot create the file + DATA
ORA-15041: diskgroup space 'DATA' exhausted
switch to the previous backup
Oracle instance started
(...)
content of Script memory:
{
clone of SQL 'alter system set = db_name
"OlderDB" comment =
' Restore the original value by RMAN "scope = spfile;
clone of SQL 'alter system reset db_unique_name scope = spfile;
clone to stop immediately;
}
execution of Script memory
Errors in the script of the memory
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-06136: the auxiliary database ORACLE error: ORA-01507: database not mounted
ORA-06512: at "SYS." "X$ DBMS_RCVMAN ', line 13466
ORA-06512: at line 1
RMAN-05556: not all data files have backups can be recovered on SNA 274262921
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-06026: some targets not found - abandonment of restoration
RMAN-06023: no backup or copy of the file 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the command duplicate Db at 15:39:11 01/10/2014
RMAN-05501: abandonment of duplicate target database
Complete recovery manager.
------------------------------------------------------------------
The first mistake of the stack was ORA-19504 while trying to restore the backup of the database.
First thing I took a glance was ASM occupation but it enough available space.
The second was a permission problem, but it doesn't seem to be the case because RMAN can correctly write the controlfile to ASM.
One have some advice on what I should look for?
Thanks in advance sorry for my English.
Select this option.
Hello.
Thanks, but is not the case. As I have said, that the DATA diskgroup has space enough he uses only a single disk in a RAID.
But I solved my problem... To the auxiliary database, I added the following to the spfile:
DB_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".
LOG_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".
I don't know why, but with these two clauses, it worked well. Perhaps RMAN was trying to restore it to the wrong place?
-
Cannot run the report. Analytics Server Error (1042017): network error
Hello
I have installed on Linux ODI.
I start to extract the data of Essbase to Oracle with Hyperion Essbase Data SQL with ReportScript LKM. But after 4 minutes process is stopped with the error:
com.hyperion.odi.essbase.ODIEssbaseException: cannot run the report. Error (1042017) analytical server: network error: the client or the server timed out while waiting to receive data by using TCP/IP. Check the network connections. Increase the values NetRetryCount or NetDelay in the ESSBASE. CFG file. Update this file on the client and the server. Restart the client, and then try again.
But if I extract some lines process worked well.
I read this forum messages and set NETDELAY = 3600, NETRETRYCOUNT = 1000 in the files:
/Home/EPM/Hyperion/products/Essbase/EssbaseServer/bin/Essbase.cfg
/Home/EPM/Hyperion/deployments/WebLogic9/servers/HyperionPlanning/webapps/HyperionPlanning/Web-INF/classes/Essbase.properties
/Home/EPM/Hyperion/common/EssbaseJavaAPI/9.5.0.0/bin/Essbase.properties
/Home/EPM/Hyperion/products/biplus/appsinfo/WebAnalysis/EssbaseJAPI/bin/Essbase.properties
/Home/EPM/Hyperion/products/biplus/bin/EssbaseJAPI/bin/Essbase.properties
/Home/EPM/Hyperion/products/Essbase/APS/bin/Essbase.properties
/Home/EPM/Hyperion/products/Essbase/EAS/Server/bin/Essbase.properties
/Home/EPM/Hyperion/products/Essbase/EssbaseStudio/Server/ess_japihome/bin/Essbase.properties
/Home/EPM/Hyperion/products/Essbase/EssbaseClient/javaapi/bin/Essbase.properties
/Home/EPM/Hyperion/products/planning/config/Essbase.properties
/Home/EPM/Hyperion/products/planning/lib/Essbase.properties
But the error occurred.
Help please with this error.Well the bug should have been resolved then.
Your options are to try the V11 essbase japi files, these must be pulled from a facility of V11 or send me an email and I can send you the.
Or use a different extraction method in the interface.See you soon
John
http://John-Goodwin.blogspot.com/ -
Cannot run the Task Manager. I right click and select from the list, but nothing happens.
See: Why won't Task Manager, REGEDIT and MSCONFIG disappear when opening?
http://WindowsXP.MVPs.org/ToolsQuit.htm Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty. -
My Windows Vista cannot run the restore of the system at startup, and it says press F11 to enter recovery mode and it dosen't work.
I can't use the CD/DVD from the CD/DVD because my dad broke it.
Can I do to solve this problem?Hello
Contact the computer manufacturer and ask them why F11 does not work to start recovery to factory settings...
Or other difficulty the CD / DVD Drive and ask the manufacturer of the computer of a set of to reinstallthe Operatying system recovery disks.
They do normally for a low cost
Any other tips we now give you another above, you should always a working CD / DVD player.
For this you need a DVD player:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Photosmart C6380 - cannot delete the document removed from the print queue.
Photosmart C6380 - cannot delete the document removed from the print queue.
Hello
From the desktop, hold down the Windows key and press R. In the run window, type services.msc and press to enter. Scroll down to the print spooler , made service right click and select Properties, then click the Stop button. Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.
Restart the computer and you should find that the documents have been deleted.
Kind regards
DP - K
-
ASP - function Remote - error: cannot run the trigger
Hello
I tried to get my macros being run by a remote server.
It's my function file remote named "remote_test_pc.asp":
framework integrated; then
conf t
interface $INTERFACE
Description macro $TRIGGER
PC-VoIP-Port Description
switchport access vlan $ACCESS_VLAN
switchport mode access
switchport vlan voice $VOICE_VLAN
broadcast storm control level 1 k pps
multicast storm-control level 2 k pps
Storm-control action trap
no event log status link
bandwidth share SRR-queue 10 10 5 75
form of bandwidth SRR-queue 10 0 0 0
priority queue
MLS qos trust dscp
no link-status of snmp trap
spanning tree portfast
spanning tree enable bpduguard
service-policy input PO_TRUST-PHONE
output
end
FI
framework integrated; then
conf t
interface $INTERFACE
No description of macro
Description by DEFAULT-CONFIG
switchport mode access
switchport access vlan 999
broadcast storm control level 1 k pps
multicast storm-control level 2 k pps
Storm-control action trap
spanning tree portfast
No switchport voice vlan $VOICE_VLAN
bandwidth share SRR-queue 10 10 5 75
form of bandwidth SRR-queue 10 0 0 0
priority queue
MLS qos trust dscp
no service-policy input PO_TRUST-PHONE
FI
output
end
FI
And this is my config on the switch to mac-group and the macro:
!
macro auto Test group address-mac-PC
Mac 0019.9990.5509 address list
!
comprehensive treatment of the auto macro
macro auto control global detection mac address
!
automatic macro execution Test-PC remote ftp://192.168.1.11/remote_test_pc.asp ACCESS_VLAN = 123 VOICE_VLAN = 127
!
When I plug this workstation for the following syslog messages:
Switch #.
Remote_test_pc.asp loading!
[OK - 1702/4096 bytes]
Enter configuration commands, one per line. End with CNTL/Z.
Switch con0 is now available
Press RETURN to get started.
Error: Cannot run the trigger Test-PC, please check trigger exists and corresponds to the valid function
26 September 11:45:37.755: % SYS-5-CONFIG_I: configured from console by console
26 September 11:45:37.772: % AUTOSMARTPORT-5-INSERT: tty0(user id:): dispositif avec adresse mac 0019.9990.5509 détectées sur l'interface FastEthernet0/3, exécuté le Test-PC) Message
Switch #.
The port works as it should, but I wonder about the error message.
The switch is 2960 with IOS 12.2 (58) SE2.
Can someone explain what this means?
Thank you very much!
Sven
Hi Sven,
I think that you are not constantly getting this message... Ignore it for now... That have no functional impact... This has been supported in 15.0 (1) SE.
Thank you
Ankur-
-
ORA-19846: cannot read the header of the data file of the remote site 21
Hello
I have a situation or I can say a scenario. It is purely for testing base. Database is on 12.1.0.1 on a Linux box using ASM (OMF).
Standby is created on another machine with the same platform and who also uses ASM (OMF) and is in phase with the primary. Now, suppose I have create a PDB file on the primary of the SEED and it is created successfully.
After that is a couple of log, do it again passes to the waiting, but MRP fails because of naming conventions. Agree with that! Now, on the primary, I remove the newly created PDB (coward the PDB newly created). Once again a couple of switches of newspapers which is passed on to the wait. Of course, the wait is always out of sync.
Now, how to get back my watch in sync with the primary? I can't roll method until the required data (new PDB) file does not exist on the main site as well. I get the following error:
RMAN > recover database service prim noredo using backupset compressed;
To go back to November 8, 15
using the control file of the target instead of recovery catalog database
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 70 = device = DISK stby type instance
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the command recover at the 18:55:32 08/11/2015
ORA-19846: cannot read the header of the data file of the remote site 21
The clues on how to I go ahead? Of course, recreating the eve is an option as its only based on test, but I don't want recreation.
Thank you.
I tried like below:
1 a incremental backup of the primary of the CNS where off the eve also taken primary backup controlfile as Eve format.
2 copy the backup of the watch parts, catalogged them on the day before.
3 recovered Eve with noredo option - it fails here with the same error pointing to the 21 data file.
OK, understood. Try not to get back the day before first, rather than restore the controlfile and then perform the restoration.
Make it like:
1. take incremental backup of primary SNA, also ensures the backup controlfile format.
2. copy pending, get the location of the data file (names) by querying v$ datafile on the eve. Restore the controlfile ensures from the backup controlfile you took on primary and mount.
3. Since you are using OMF, the path of primary and standby data file will be different. (
/ ). If you require catalog data from the database files pending. (Reason: you restore controlfile from elementary to step 2, which takes place from the main access road). Use the details that you obtained in step 2 and catalog them.
4. turn the database copy by RMAN. (RMAN > switch database to copy ;))
5 Catalog backup items that you copied in step 2.
6. recover the standby database using 'noredo' option.
7. finally start the MRP. This should solve your problem.
The reason I say this works is because here, you restore the controlfile to primary first, which will not have details 21, datafile, and then you are recovering. So it must succeed.
In the previous method, you tried to first collect all the day before, and then restore the controlfile. While remedial classes, always watch seeks datafile 21 as he controlfile is not yet updated.
HTH
-Jonathan Rolland
-
ORA-29868: cannot issue the DOF on a field marked as LOAD index
When I try to delete a text index I get the message: ORA-29868: cannot issue the DOF on a field marked as LOAD index
Here are all of the command I use to drop it:
Start
ctx_ddl.drop_preference ('"IDX_SO_DST" ');
end;
/
Start
ctx_ddl.drop_preference ('"IDX_SO_FIL" ');
end;
/
Start
ctx_ddl.drop_section_group ('"IDX_SO_SGP" ');
end;
/
Start
ctx_ddl.drop_preference ('"IDX_SO_LEX" ');
end;
/
Start
-ctx_ddl.unsetset_attribute ('"IDX_SO_WDL" ', 'STEMMER');
-ctx_ddl.unset_attribute ('"IDX_SO_WDL" ', 'FUZZY_MATCH');
ctx_ddl.drop_preference ('"IDX_SO_WDL" ');
end;
/
Start
ctx_ddl.drop_stoplist ('"IDX_SO_SPL" ');
end;
/
Start
ctx_ddl.unset_attribute ('"IDX_SO_STO" ', 'R_TABLE_CLAUSE');
ctx_ddl.unset_attribute ('"IDX_SO_STO" ', 'I_INDEX_CLAUSE');
ctx_ddl.drop_preference ('"IDX_SO_STO" ');
end;
/
Drop index "ACQUISITIONS." "" IDX_SO ".
When I try to get command of the force
ALTER INDEX "ACQUISITIONS." "' IDX_SO ' DROP FORCE
I get the message:
ORA-14004: lack of keyword SCORE
I don't know how to get this table partitions
Can you advise how to find partitions?
or how to remove the particular index successful? This is a test environment.
I run 11.2 under windows.
Thank you
It looks that it is locally partitioned index, so "alter index" will not work without a partition name. But you can try simply
DROP INDEX
FORCE; If this does not work, try to restart the database and repeat the index fall. Do not use FORCE unless you have to.
If it still does not work, you will need to login as SYS and run
ctxsys.ctx_adm.mark_failed ("
", " ") that resets any clue to 'FAIL' status and allow to delete the index (even once, do not use FORCE unless you have to).
Maybe you are looking for
-
If I send an email to: recipient and a cc: recipient, I get only the to: recipient
-
Tecra M3 or get overheated - need to wait for the new motherboard
My Tecra M3 (serial number X5621357G) fan started working at maximum speed in November.Technical support Toshiba in Greece kept for repair of 26 November 2007 to 14 December 2007. They changed the motherboard and the fan. After this repair, the fan s
-
I really need these files for a video! I thought that after I did with the video I could remove the clips... it turns out that not... I'm so stupid CAN PLS me HELP YOU?
-
My laptop screen is cracked, anyway drop for repair?
-
How do you turn on Bluetooth? Or how can I make it work?
Hello I got this compaq Presario CQ61 on November 15, 2009. Everything was fine with it for more than a month, but since the end of last year, I get this small windows all the time that appears: "BTTray - error: unable to start bluetooth stack servic