Oracle AIA CBIA PIP: Why account level settings are not supported?

Similar Questions

• Why the proxy settings are not respected

  I set up SSH as a proxy server on my laptop when I'm on a public network and configure Firefox to use the proxy by completing the manual Proxy config.

  If SSH doesn't work, I get this error message as expected: "the proxy server refuses connections" when I try to access any website EXCEPT Google.

  Searches on Google and access Google.com still works, even when the proxy server is not up. That seems broken.

  When the proxy server IS up, Google searches do not appear to use it.

  Google is my default search provider. If I try to access Bing, Firefox is behaving as expected (no access when proxy is out, throw up debugging indicating new connections when the proxy is up). If I change from Bing to be default search provider, the behavior of the two remains the same (proxy will use Bing, Google does not work).

  Why access to Google (and only Google?) ignore the proxy settings? Are there other sites of 'magic' that would also ignore the proxy? I use the proxy because I want to protect my internet traffic when I'm on public networks, if Firefox can randomly ignore them for some sites but not others, how can I trust him?

  My configuration problem. I realized that any site that uses https worked, while others are not.

  Somehow the "use this proxy server for all protocols" got unchecked. Audit, it solves the problem.

• Why my firefox settings are not preserved when I update?

  Was just invited to update my Firefox to 23.0 and, as usual, asked if I wanted to "import" whatever it is INTERNET Explorer. I said NO - I don't want these settings in Firefox.

  I expect, however, that the update would bring on my customizations of my previous version of Firefox - but it didn't! No preserved Favorites, my window settings (I HATE TABS!) were gone, my wiped out - privacy settings I have to rebuild my environment to pass one version of FF to another?

  Why do you ask me about IE, but not Firefox? And--now--all of these customizations are lost?

  Yes, it looks like your Firefox profile folder.

  You have a profiles.ini file in C:\Users\me\AppData\Roaming\Mozilla\Firefox\

  If this file is there then you can list its contents?

  Note that Windows can hide the .ini file extension, so you can see only one file of profiles also the profiles folder that stores the profile folder.

• Location bar settings are not Micaëla when I close FF

  Pfff good so I put my location bar settings > nothing: If selected, the address bar will not display results that match what you type.

  then I close firefox, reopen and voila... It shows the history and bookmars. Now more funny thing is when I put the bookmarks bar, he remembers that.

  Then... What?

  I don't want the locationbar to show my favorites

  Also, if I set Firefox to remember any history, that works.

  Then why my locationbar settings do not work.

  Cleaning of privacy programs and may interfere with this (Norton, McAfee). If installed, adjust the settings as needed.

  It seems that the file user.js in your profile folder may be the substitution of preferences.

  Follow these steps:

  • Click on the Firefox button in the top left, then click on the help menu and select troubleshooting information in the submenu. If you do not have a Firefox button, click Help on the top menu and select troubleshooting information in the menu.
  • At the top of the page, you should see "Display folder." Your profile folder will now open.
  • At the top of the Firefox window, click the button of Firefox (File menu in Windows XP) and then click on leave
  • Locate the user.jsfile and open it with a text editor such as Notepad
  • Clear the contents of it, and then save the file.

  If the method above fails to get this preference to save, you need to reset Firefox:

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Open the troubleshooting information in the Help menu.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  • http://KB.mozillazine.org/Preferences_not_saved
  • How to fix preferences that will not save

• Mobile data does not and the name of the Access Point settings are not available

  I don't have a mobile data, not even the small up and down arrows or letters beside the sims signal bars appear.

  I tried all the troubleshooting settings and different type of network, the airplane mode is off, mobile data are no limit, no power save modes are on. Phone is dual sim so I tried on the two sims and tried to disable the other sim and changing the sim slots, both sims are loaded with a credit of data that works in other android devices. WiFi works fine. Factory reset does not help.

  There is that one thing that I can't not try troubleshooting. When I select settings > more > mobile networks > access point names, it says

  "Access Point name settings are not available for this user.

  Maybe if I could put APN I could get mobile data. How can I do or how I can try to get mobile data to work?

  Phone's Xperia M4 Aqua E2363 with build 26.1.B.2.102 thanks if you can help

  This text is a bit misleading, which is something that I have forwarded internally as your comments.

  If you have no NPP stored the phone displays the text "the name of the Access Point settings are not available for this user" even if you use the owner account and have access to the settings.

  Try to download the automatic settings from settings-> more-> Internet settings and see if that helps.

• Why this message: you are not allowed to view or update this topic

  Why this message: you are not allowed to publish or comment on it.

  It's a legitimate question.

  You encounter a bug in the Jive Software that runs this forum. Most of the time simply try again or refresh the page will fix the problem. There is one caveat with respect to time. You can't post more than once every 30 seconds, and it's to discourage spamming.

• Windows display settings are not optimized

  I tried to fix it and he said that the display settings are not optimized that means

  Hello

  This fixit?

  Have you tried to make the resolution equal to the native resolution of your screen?

  Right-click on an empty part of your desktop, and then click Properties. Click on the settings tab, drag the slider to the right. This should give the native resolution of your monitor. If not you may need to get the latest drivers for the graphics card.

  If that makes things too small, you can try to slide to the left to get a lower resolution but I suggest using only a resolution that maintains the same ratio as the native resolution of your screen.

  Tricky

• I can't access the itunes store. It telling me that my network connection has timed out or my network settings are not correct.

  Original title: problems with itunes

  I have recently purchsed an ipod and downloaded the itunes program.  Everything seems to work fine except or the fact that I can not access the itunes store, so have created new problems.  It telling me that my network connection has timed out or my network settings are not correct.  What settings should I have on, how can I make this work?

  Hello
  
  The reason for not being able to connect to the iTunes store may be due to the "hosts file" blocking the iTunes Store, or it can also be caused by security software, most likely, it might be Norton Firewall.
  Step 1:
  
  
  Note: Please make sure that you enable the antivirus/firewall software after the test to keep your computer protected.
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off 
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Step 2:
  
  
  
  
  See the link below for more details:
   
  Unable to connect to the iTunes Store
  http://support.Apple.com/kb/TS1368#win24
  
  Follow the steps in troubleshooting mentioned in the above article. If the steps listed in the article do not resolve the problem, contact the Support Apple technique.
  http://www.Apple.com/support/
  http://www.Apple.com/contact/
  http://discussions.Apple.com/category.jspa?categoryID=149

  Can run the fixit tool mentioned in the link below:
  http://support.Microsoft.com/kb/972034/en-us you can try to disable the firewall completely or include an exception for the iTunes application in the firewall and check for the issue.
  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Error: Resolution settings are not up to date, requiring a display of 1024 x 768 or more, at the opening of Digital Photo Professional from Canon Utilities

  Title: Canon Utilities Digital Photo Professional

  My pc, I cannot open the software above.

  I get an error message saying that my resolution settings are not up to date, that requires a display of 1024 x 768 or more, but I have a HD monitor and a high-end graphics (Geoforce GT7000) card.

  Windows 7 thanks to a 6 core processor and 4 GB of memory. If anyone can help.

  Thank you very much

  Steve

  Hello

  -You are aware of any changes made on the computer before this problem?
   
  Method 1: I suggest to see the link below and check if the problem persists.
  Change your screen resolution
  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution
   
  Method 2: If the problem persists, I suggest to update the graphics card and check if it helps.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Hope this information helps.

• The Windows 7 user account control settings does not open

  Hello

  Someone knows a problem where a computer launches the application "change user account control settings?  We are dev work on multiple PCs and need to disable this feature.  Normally, I would run the UAC and just drag the bar down, but I can't even the application to load.  I even tried running: C:\Windows\System32\userAccountControlSetings.exe and it does nothing.

  Thank you
  Sean

  Well, I was not able to understand why the window UAC doesn't appear, however, I managed to disable UAC via the local policy settings.  For reference purposes:

  1. Start > run > gpedit.msc
  2. Computer configuration > Windows settings > security settings > local policies > Security Options
  3. Then define:
  4. User account control: behavior of the guest of elevation for administrators in Admin Approval Mode – set its value toElevate without asking for confirmation.
  5. User account control: detect application installations and prompt for elevation - set its value todisabled.
  6. User account control: only elevate the UIAccess applications that are installed in secure locations - set its value todisabled.
  7. User Account Control: Run all administrators in Admin Approval Mode - set its value todisabled.

  Sean

• My security settings are not allowing me to download an itunes file, all the solutions?

  Whenever I try to download latest iTunes the computer said that security settings does not allow the file to download. I tried everything including turning off the firewall. I contacted Itunes and they told me to completely uninstall Itunes, which I did, but it still does not work. They said to contact microsoft.

  Hello

  1. what browser do you use?
  2. are you able to download other software?

  If you use internet explorer, then try to adjust the default setting and check security.

  a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.
  b. click on tools and then click Internet Options.
  c. click on the Security tab.
  d. click on the Internet icon.
  e. to set Internet Explorer to the default security level, click default level.
  f. When you have finished making changes to the security settings, click OK.

• Development of lighting and shadows settings are not functions

  While implementing a plugin to image processing, I learned something very interesting (for me) on the tones dark and light parameters of development.  The other basic tone settings (exposure, contrast, saturation, etc.) always map any one color to another simple color evenly across the image.  But the dark and light tones can map a given in multiple colors in a single image, depending on the location of the pixel color.

  For example, in a test image I made with Shadows = + 100, pixel (824 286) had its origin value of 16-bit color (0, 0, 0) transformed into (1724,1387,852).  Pixel (861 287) was also the original color (0,0,0), but it turns into a color very different (3093,2688,1316).

  Abstractly, the other the basic tone settings are functions (any input color is always the same output color), all in shadows and points strong are-to-many mappings (any color input can have several colors of output). I knew that clarity not was not a function - transformed from a pixel value would depend on neighboring pixels.  But it does appear to me that dark and light tones are not functions either.

  This property of shadows and highlights well known by experienced users of LR?  (I.e. Rob, I guess you knew that?)

  Yup - @Lr4 (PV2012) there are 3 settings using the new algorithm 'magical' from Adobe:

  * Clarity

  * Puts out

  * Shadows

  I don't know really enough to fill in many details, except to say that when you use - highlights or + shadows, he 'clarifies' highlights and/or shadows a bit, using the algorithm of the transformed of Laplace-based Adobe developed. Jeff Schewe made us a white paper on this subject in the past, but I do not know the link... For me, it is similar to the "Topaz" detail and Topaz Adjust 'adaptive' improvements - two Photoshop plugins I used regularly until the Lr4 is out (Adobe algorithm is very well done - in my opinion, better than Topaz labs, or others are doing similar things, for example, PhaseOne, DxO, Nikon,..).

  FWIW - it's one of the reasons why some people raise hell when Lr4 is out - no way to brighten the shadows using sliders base without getting the effect of clarification... That said, Eric Chan also informed us that extra Lr3 light had a similar mathematical algorithm it backup and therefore Lr4 wasn't new in this regard, only improved...

  Rob

• Oracle 11 g Express Edition 11.2.0.0 not supported the impdp utility?

  Hello
  
  We strive to import a dump Oracle Express Edition, without success. We got the error message: ORA-39213: metadata processing is not available.
  
  (A) source database: database Oracle 11 g Enterprise Edition Release 11.1.0.7.0
  (B) target database: database Oracle 11 g Express Edition Release 11.2.0.2.0
  
  You are looking for a solution has led us to the following forum entries:
  
  1 http://kmpdba.wordpress.com/2012/05/02/ora-39213-metadata-processing-is-not-available/ Cause: package DBMS_METADATA_UTIL does not run successfully. Solution: install (among others) SQL > @$ORACLE_HOME/javavm/install/initjvm.sql
  2. purpose: there is no scrript of @$ORACLE_HOME/javavm/install/initjvm.sql--> http://www.oracle.com/us/products/database/enterprise-edition/comparisons/index.html--> Oracle 11 g EX does not support java
  
  Issues related to the:
  
  (a) does support Oracle 11 g EX impdp utility at all?
  (b) how it would be possible to import the dump mentioned above in (A) in (B)?
  
  Thanks in advance,
  
  Michel

  Hello
  It seems ike datapump has somehow been corrupted somehow. You can recharge at 11.2 by running:

  @?/rdbms/admin/catproc.sql as SYS (connections to is arrested all get it first).

  Then try again.

  I don't really use XE, but I don't see why datapump doesn't work - some function/feature can be turned off, but the main feature is expected to be there.

  Agress,
  Harry

• Synaptics device settings are not not in the mouse properties

  Hello

  I have a HP dm4t-1000 running Windows 7.  I just reformatted the HARD drive and tried to get the system up to-and-operational again.  Everything seems to work properly, with the exception of the touchpad.

  I rebooted, uninstalled and reinstalled the driver for the Synaptics touchpad about 20 times so far (several versions different too).  I can see the touchpad of my device manager (says it's working properly) and Windows Update and function of update driver in the device-> Manager Synaptics PS/2 Port TouchPad-> update driver software... say that the driver is up-to-date.  However, the touchpad still does not (at all), and when I try to change the settings of the Synaptics (Control Panel-> mouse) driver, I do NOT see a device settings tab.  Also, when I open the properties of the mouse (Control Panel-> mouse), I get the following error message:

  "Control Panel Extension is Incompatible with the Version of the driver"

  Here, I'm confused.  Device Manager indicates that my hardware is working properly, but my touchpad is completely non-functional.

  Any suggestions?

  If Synaptics settings does not appear under the mouse properties after completing the previous steps, try the following:

  1. Open Device Manager
  2. Find the device touchpad ("PS/2 Compatible Mouse")
  3. Right-click on the device, then click on "Update driver software"
  4. Choose "Browse my computer for driver software".
  5. Choose "Let Me pick from a list of drivers for devices on my computer.
  6. Nverifiez the option 'Show compatible hardware '.
  7. nder "Manufacturer", scroll down to "Synaptics".
  8. Under the 'model', the 17.0.19 driver should appear.
  9. Select the driver, and then click Next.
  10. Click 'Yes' to the 'pilot WARNING update"pop up.
  11. Restart
  12. Tell me if it works for you

• Help - why the songs that are not on my iPhone appearing in my list of app music albums/songs?

  I have over 500 GB of music on my Mac, so I create a playlist for the songs I want to sync my iPhone. Yet when I look at my phone, there are many songs that are not in sync would be playlist. They cannot be read unless the phone is connected to my wifi at home, but I don't want them cluttering up my phone and makes it almost impossible to find the tracks I want to listen to.

  I hate the new music app. For the first time since I converted to Apple 10 years ago, I wonder if I can be forced away because it's so horrible. Why ruin a great product with terrible software? Anyway, if anyone can help me to fix this serious bug, I would be very grateful.

  If you go to the library of the screen and press the red text just below the icons of the album/playlist (where you select whether you want the screen to show the view of the artist/Album/songs downstairs there is a toggle to only show that downloaded music.) If you enable this, then only the songs that are actually ON your iPhone will be in BLACK characters. The rest of your music library to iCloud either won't display at all or be grey. Now - if you have a few streaming, you can see more songs, because the songs that are heard are cached in the memory of the iPhone box and supposedly deleted automatically when it fills up (but not user accessible unless you use some third-party programs).

  What you can do - so they need WiFi or data cell-, it's make a playlist in iTunes that you want on your iPhone. Then (assuming that Apple music and iCloud music library are running on both), you can go to the playlist and press the small cloud/down arrow icon and download these tracks on your iPhone. Then, you can play these songs without access to wifi or cell phone.