Order of PowerCLI to save VCentre with VShield manager

Similar Questions

• Have just bought a new iMac and imported all my old data.  When I try to open a pages document it says that it cannot be opened because it is too old, and that to open it, I have to save it with Pages ' 09 first.  So, how he back up if I can't open it?

  Have just bought a new iMac and imported all my old data.  When I try to open a pages document it says that it cannot be opened because it is too old, and that to open it, I have to save it with Pages ' 09 first.  So, how he back up if I can't open it?

  Start the OS X App Store, then click on the item toolbar updates. V5.6.1 pages should be available, and this will open documents Pages ' 09, ' 08 and ' 06. In messages to this community, you should always share what version specific pages and OS X that you are currently using.

• After I open a document using Adobe reader DC and want to save it with the help of Save as when I try to open this operation all I get is an empty windo saying save as. This problem just started, note I'm on Windows 7 Prof

  After I open a document using Adobe reader DC and want to save it with the help of Save as when I try to open this operation all I get is an empty windo saying save as. This problem just started, note I'm on Windows 7 Prof

  Hi sgodwin2468,

  Make sure that Acrobat Reader DC is updated Release Notes | Adobe Acrobat, Reader.

  If the problem persists, try the solution below.

  The default "save under" Acrobat/Reader DC dialog box is different from the dialogue box you had in earlier versions of Acrobat/Reader, it also allows you to record in the clouds and previous locations that you saved the files. It is possible that when Acrobat/Reader tries to connect to the 'cloud', it runs into problems. You can try to disable this feature to see if this brings your backup in the back of the box: open Acrobat Preferences, then go to the "General" category and uncheck "show the online storage when you save files:

  

  Kind regards

  Nicos

• integration of snort IDS with vshield product

  Hi dear all,

  We are in the start mode of virtualization. Is it possible to integrate snort rules inside product vshield? How to integrate an ID with vShield? Please help me.

  Hello

  vShield Edge and App are virtual appliances that cannot be changed. So, the installation of SNORT or whatever it is inside the actual virtual appliance is not possible. However, you can always have installed SNORT and running on another computer connected to the same vSwitch (or vDS) virtual and then configure port mirroring to send all traffic to this specific virtual machine. In this way, you are always notified to any alarms/offences detected by SNORT within the network. See the following blog for tips on how to do (vSphere 5 new features network & #8211;) Duplication of port | VMware vSphere Blog - VMware Blogs)

  I hope this helps...

• How to separate vShield Manager with vCenter

  People, we have installed vShield manager. Before you configure devices such as EDGE or APP, we decided to go for some change major grace to which we would like to uninstall the vShield Manager. I just wanted to know how we can separate vShield Manager with vCenter or simply if I delete device it will be deleted?

  Please help.

  Thank you and best regards.

  Hari.

  No,

  VShield manager is a device managed by plug-in.

  If you previously uninstall component vshield vshield link manager, you can remove the device and then remove the plug in. (like other component like Vmware Data recovery,...)

  Kind regards

  Julien.

• Distributed VSwitches with vShield Zones

  Hello

  It has been a week since I tried to play with vShield with vNDS.

  Although I followed word by word the administration guide, my protected virtual machines are not able to communicate with the rest of the network.

  What seems strange to me, is that in an environment normal vswitch, the u0 is always linked originally vswitch, linked to a physical interface.

  But if you see the vNDS procedure, u0 and p0 are connected to the VMFN cloned without related physical adapter... so maybe I'm missing something or there is something odd here

  If someone managed to fully configure vShield with vNDS and if so, could you help me please :)?

  Thank you very much

  I think that this could be a problem with the documentation is not not clear in the summary at the bottom the page 32 of Executive Guide. Specifically the step #2 that does sound like the protected and non protected port groups must be created on the same vDS. Steps 1-4 (page 32-34) are only a summary of what to do and lists only very generalized steps.

  The procedure detailed first on page 33:

  -Create the second vDS (the protected) Page 33

  -Creating the dvPort protected group in the vDS second/protected the Page 33

  -Create the unprotected dvPort group in the vDS existing or unprotected. He is the one with the physical card. Page 34

  Ultimately, the insertion is very similar as with the legacy vSwitch. Two virtual switches filled by the vShield, where the protected outside/no switch (physical NIC) uplink and the switch Interior/protected does not.

• It seems to me difficult to 'save' or ' Save as ' with jpg files. Any Suggestions?

  It seems to me difficult to 'save' or ' Save as ' with jpg files. Any Suggestions?

  To add to the response of R_Kelly, if you no longer need CS5, remove all traces of CS5 and CS6 with Creative Suite Cleaner. Re-install new CS6.

  Plug-ins (incompatible) are known to cause this problem, you are faced with.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Just as a reference: how to FIX the annoying 'White Screen Of Death"with Silverlight and"Access denied"error with computer management.

  Well, I just hope that someone who has met these two mistakes will find my dose. It might save a lot of pointless research on the net.

  SYMPTOMS:
  -When you try to open a Silverlight application in your browser (Firefox, Chrome, IE, etc), your browser displays only a white area. When you right click on the white area, you can click on the Silverlight properties.
  -If you try to start "Computer management" by clicking on the 'My Computer' icon and select 'Manage', you get the following error: 'access denied '.

  CAUSE:
  The following errors are usually the result of a bad environment variable. In this case the "windir" environment variable does not work correctly. You can try running the management of the computer to start > run and entering:
  %windir%\system32\mmc.exe/s %windir%\system32\compmgmt.msc

  Notice the between the characters of percentage windir environment variable. If you run the above code, you will probably get an error saying that MMC cannot open the file. Look closely at the path, it's back!
  You will probably find any % somewhere.

  What actually happened here is the variable windir made reference to another variable: systemroot
  Why this creates problems, I'm not sure. Also, I don't understand what made then variable windir change.

  SOLUTION:
  -From your desktop or Explorer: right-click on "My computer" and select "Properties".
  -Click on the "Advanced" tab and then click "Environment Variables".

  http://pcauthorities.com/images/advanced-system-properties-XP.jpg

  -Did the windir variable. Together to "C:\Windows" do not think that it is already set to "C:\Windows", because windows then tells you. Double-click it to know for sure.

  http://www.adminxp.com/windowsvista/envvariabl.PNG

  -See, I told you! Change this to "C:\Windows".

  http://www.adminxp.com/windowsvista/editenvvar.PNG

  Hi Jooch,
   
  Thanks for posting such a detailed response, including symptoms, Cause, and resolution to "White Screen Of Death" with Silverlight and "Access denied" error with computer management"issues.
   
  I appreciate your time and effort to do the same. This could help other users of the forum as well.

• vShield Manager interface network & group of port / vlan

  Hello:

  I'm new to vShield and looking to use it in our environment.  I read the documentation and seeks to install the first part, the Device Manager vShield.  By reading the docs, it specifies the management interface for the vShield Manager is in its own group of port.  Why is this?  Is it okay to put this interface in a group of existing port?  Is it possible in a port with another management SMV Group (vCenter, etc.)?  Also, is it better practice to have this in a standard vs dvswitch, or isn't it important?  I was looking through posts and the other docs and so far I don't see a clear reason why it must be in its own group of port.

  So far, the only element that we will consider is vShield Endpoint, for now.  We have no plans to watch App or Edge, etc.

  Thanks in advance!

  Hello

  The Manager can be put on any standard or distributed port group. Do not create any new groups-port. The only thing that is necessary to access vCenter/SSO and DNS, NTP server (mirror).

  There is no need to create a new. IMHO, this could be a failure in the doc.

  Kind regards

  Roland

• vShield Manager cannot remove portgroup

  I have problem with vCloud Director 1.5. When I stop TIME it has this error.

  -vShield Manager cannot remove portgroup dvportgroup-8446 on DVS dvs-7564

  HTTP/1.1 500 Internal Server Error

  Code: 100, Description: VC connection error: error connecting to vCenter server allocation. ; nested exception is java.util.concurrent.ExecutionException: com.vmware.vim.binding.vim.fault.VimFault com.vmware.vim.binding.vim.fault.InvalidLogin:inherited:

  inherited from com.vmware.vim.binding.vim.fault.InvalidLogin: could not complete the connection due to an incorrect user name or password.

  That said I worng usename and password but I don't change password. I don't know why. A few days before everything works ok. I can start and stop TIME normally. But today this error.

  Thank you for help me alots.

  have you tried to go to your manage & Monitor tab and then access your vcenter and see if there are errors in saying vsphield id inaccessible. If there ar enone, you could try reconnecting to vcenter and also specify the credentials for vshield manager. And then you try to do the task.

• vShield Manager investment - clarification of required documentation

  I'm trying to deploy vShield Manager in our test environment and dev (before we implement production).

  I have read the documentation "vShield Installation and Upgrade Guide - vShield Manager 5.1". On page 20, the following statement is made:

  NOTE do not place the management interface of the vShield Manager in the same port as well as the Service Console VMkernel group.

  Question:

  Is it OK for the vShield Manager to be in the same subnet and VLAN as the Service Console and VMkernel, with the help of a group of dedicated ports?

  For example, I create another port that has the same VLAN as the VMkernel and Service and the vShield Manager Console uses this group?

  Let me explain with an example.

  On page 19, the following statement is made:

  With vShield 5.0 and later, you can install the vShield Manager in a different vCenter as the vShield Manager is going to be that interacts with. A single vShield Manager offers a server environment unique vCenter.

  vCenter1

  • It's the vCenter the vShield Manager will be deployed to
    
  • It uses the portgroup 'Network management' with 18 VLAN for the Service Console and VMkernel
    
  • It's on the 192.168.10.0/24 subnet
    

  vShield Manager

  • This vShield Manager runs under vCenter 1
    
  • It uses the portgroup 'Management network for vShield Manager ONLY' with 18 VLAN
    
  • This is where the management of the vShield Manager interface will run
    
  • It's on the 192.168.10.0/24 subnet
    

  vCenter2

  • It's the vCenter the vShield Manager will be Interoperation with
    
  • It is a virtual machine running under vCenter1
    
  • It's on the 192.168.10.0/24 subnet
    
  • It uses the portgroup 'Network management' with 18 VLAN for VM traffic
    

  So my question once again:

  Is it OK for the vShield Manager to be in the same subnet and VLAN as the Service Console and VMkernel, with the help of a group of dedicated ports?

  Yes, it's good to have the Manager on the same VLAN as the vmkernel interfaces.    According to your description below you will be fine and actually following practice correctly.

  Do know not why the docs say not to put it in the same portgroup as the vmkernel or console service that those are special exchanges and you can't put a virtual machine (the Director) in a GRPE ports console vmkernel or service.   I'll have our people docs on that paycheck.

• Error adding vShield Manager in vCD

  I have tried a CEP of vCD and vShield using the. OVA on VMware.com
  I see error adding vShield Manager vCloud Director.
  I checked the vShield Manager, it works well, can connect display settings on the Web page.
  I tried to telnet vShiled Manager of port 442 vCD virtual machine, and that failed.
  
  What should I do next?

  Does anyone have any suggestions?

  This may seem like a stupid answer, but it launched my butt when I started using vShield edge with vCloud.

  Connect to the device vShield edge with a web browser:

  https://vshieldedgedevice - one of the first options is to connect the edghe to a vcenter, the account used to connect vshield edge to vcenter - this is a good one to use because it configures all rights that edge will need on this account... (don't forget to login/pw)

  In vCloud use this login/pw.

  Now, here's what made me, the password cannot contain a few special tank - I forgot the list but I don't know ":" me before.

  Hope this helps

• vShield manager installation

  I am trying to install vShield Manager because it must be run to install vCloud.

  Now Manager of vShield deployment went well, not to mention Manager I also installed vShield Endpoint on a cluster with two servers (I want to test deep security some time later).

  Everything seems fine, but strangely, I have found that the task of the latter, an infinite loop of "Scan, block ports in firewall, queries and open Firewall ports" appears.

  This happends on the servers of al in my lab, which is a server running, vshield vcenter and a group distinct from both servers.

  I forgot a few setting or configuration to stop this infinite loop?

  Concerning

  It's Normal. These are standard alarms/tasks after installing vshield & will be displayed whenever you select any ESX host.

• Unable to connect to the vShield Manager

  Hello

  I have deployed just a test "vCloud Director camera 1.5" and in the "Attach new vCenter ' Assistant in the vCloud Director 1.5 portal, I was able to attach my vCenter fine credentials, but when he asked"vShield Connection Manager"I grabbed both FQDN or the IP address of the unit vShield Manager user/pass appropriate but still didn't work but gave an error"unable to connect to the vShield Manager. "

  I double check my two vSM01 DNS entries and vCD01 servers are looking backward/forward very well.  My IP model using base 192.168.1.xx without firewall or VLANS between the two, if someone has problems with that please advice.

  Thanks in advance!

  Works very well here. But I recommend certainly triple check DNS, as it is the thing that most often cause these problems.

• The upgrade to ESXi 4.1 with Update Manager - disconnect SAN?

  Just noticed a patch was released for ESXi 4.1, if I deploy this hotfix with Update Manager, do I have to disconnect the SAN in order to install the host?  ESXi make his case of scanning for unformatted volumes and format when it restarts first after being patched?

  See you soon

  JD

  CompTIA A + network +.

  VMware VCP 3

  If you have access to the material, you can fiber optic cables.  We do not usually have on the correction just because you're not the formatting of the readers as you would for and install.  However, it won't hurt anything to pull the cables if you can.