Orders of MathScript

Similar Questions

• "print" command in Mathscript recording is not the plots in BMP format!

  Hi guys,.

  I am creating a vi that automatically generates a pdf for my project report. I found a way to record the report directly in pdf format (in other words, I have 'print' my report to a (PDFCreator) Virtual PDF printer that saves the file in a specific folder with the date/time under his name.) "So, this was the first step to make the automatic procedure).

  I'm stuck in the next step, which is adding to the report no graphics bad appearance of labview, but the plots of the victims of the Mathscript.

  Yes, after you have added as input 'a' my data to the mathscript node, I use the following commands:

  Figure

  Plot (a)

  print the image

  Now, what is this sequence is to do a beautiful land of my data and then save it as "image.eps" in the default folder.

  However, the eps format is not at all useful to me because I can't import the plot with the 'Add Image to Report.vi '. This vi supports the formats BMP, GIF, WMF, EMF and JPG only.

  So, I want to save as BMP mathscript plot. It's supposed to be possible, but I have not been able to find a way. Using the command 'Print' for Labview Mathscript 2011 reads as follows:

  http://zone.NI.com/reference/en-XX/help/373123B-01/lvtextmath/msfunc_print/

  Syntax

  
  

  print

  Print (a)

  Print (file)

  printing (, file)

  Description

  
  

  Print the trace window, or save it in a file in BMP or EPS format. If the trace to save window is a plot of the image or a 3D terrain, the file must be in BMP format. Other types of plots, formats BMP and EPS are supported.

  There is no way for me to choose what format I want, and it automatically selects the eps. If I use the command

  print image.bmp

  It gives me an error. So adding the endpoint .bmp is not the way to go.

  Overall, it is essential for me to export the plot in BMP format (in order to import it into the generation of report), but I can't find a way, althouth it is supposed to work.

  Any ideas?

  Thank you

  PS. I run Labview 2011 SP1

  Hello

  You must use the following command

  Print ('test.bmp')

  Instead of

  print test.bmp

• MathScript failed to meet

  Hello!

  I am using a node Mathscript in BT 8.5.1, but without success. I get the

  error 'Failure of VI to compile' and the Mathscript is 'marked as main error ".  I have

  used Mathscripts before, but never had these problems. I use Windows XP SP3.

  Everything works fine when I try the example of Labview Mathscript.

  You have a solution for this problem?

  Thanks in advance!

  / Mattias

  Hello Mattias,.

  This looks like a subtle problem.  You have a control located at "affix 2009-04 - 17\Data.ctl.»  Unfortunately, MathScript also uses a control called 'data.ctl.'  LabVIEW will not allow two separate controls with the same name be in memory at the same time.  It seems that your order is already in memory when MathScript starts to load, so it binds to your control instead.  This causes internal errors and signals that the VI cannot be compiled.  The only solution now is to rename your control to something other than "data.ctl."  We work on solving cela and hope to be in a future release.

  Grant M.
  Staff software engineer | LabVIEW Math & Signal Processing | National Instruments

• Error in Mathscript (FOPDT transfer function)

  Hi all, I'm writing a first order system and dead time in the mathscript unfortunetaly I found that it displays an error (please see attachments), someone has an idea or an approach to write a transfer of FOPDT mathscript function?

  Thank you veery much.

  Yet one thing... This might be easier if you go 100% graphic...

  Below is a snippet and you can simply drag and drop into your LabVIEW 2011 diagram and this will copy this code in it.

  

• Problem view Lab mathscript rt suite student edition

  I bought the suite 2012 Student edition software recently, according to the descriptiton on NOR it should have mathscript on it, but I get error when I run mathscript below. Comments about how to solve the problem would be appreciated.

  LabVIEW: Module MathScript RT is not installed on this computer, expired or is terminated improperly. Install or activate LabVIEW MathScript RT Module on this computer to continue using this product. Visit the Web of National Instruments to ni.com buy these products. If you have already purchased this product, select help > activate LabVIEW components to activate this product.

  This is the link I bought:

  http://E5.OnTheHub.com/WebStore/OfferingDetails.aspx?WS=49c547ba-f56d-DD11-bb6c-0030485a6b08&VSRO=8&...

  I run window 7.

  Setup may be separated on these discs or on another drive anyway, your serial number needed to activate it and it still would be set up as its own separate module. Please download the module Mathscript RT the link in my first post. You can also download other modules of our Web site and should be able to enter your serial no for them to activate in the License Manager EITHER.

  It looks not to the module Mathscript RT is installed or installed in the wrong order.

• store internal variables in the nodes mathscript/scilab

  Is it possible to store the values of local variables in mathscript node? Maybe have an initialization section where variables are implemented and then later updated. And then something to reset the closure of the vi? Im guessing not, im guessing that we must do the same as labview, pass new releases at the entrances, but it is much more natural in a text based language to do it this way (for me anyway).

  Gordal salvation,

  You can use the backup and loading of orders to store variables for your scripts in a file.  Note that these commands will a warning glyph occur which reduces performance, so what I propose is the following:

  

• MathScript - using MatLab code

  There were a number of comments about Mathscript and MatLab throughout the area of web pages, but I wanted to just ask a few pointed questions that likely should be easy to answer so that I can be sure my needs will be met with the add-on MathScript. So now,

  (1) one of my colleagues has some programs written by some of the students is no longer with his lab to be able to pack up and send some of his colleagues in different universities who perform the same research, such as it is. The courage of the LabView programs is in the MatLab code; He MatLab and can run them, but external colleagues likely will not. I guess the Mathscript Module will allow me to:

  ___a) transfer the MatLab Code MatLab lymph nodes MathScript and have the same functionality (it does not appear to be an advanced MatLab functions in there, but it's long makes me not want to re - write in graphical programming LabView)

  ___B) create an exe file of these programs with my Application Builder without the need for MatLab or other processing engine must be installed on the destination computers

  Is this the case?

  (2) one thing I noticed on the code MatLab in these programs is that it seems to be variables that are created in a single node and are then called in another (without linking to them via cables which is what I'd be used to it). Is this standard 'persistence' for the use of MatLab nodes and Mathscript has the same functionality? Never used these so I wasn't sure.

  That's about all. I just wanted to be sure before that I go ahead with this option.

  I took a peek at your code and managed to implement your code with a MathScript window. Only, I've declared the variable in each node and has been able to run the VI. The warning, seen in the image below stating when you use global variables with the MathScript node, your code may run more slowly than normal.

  

  With respect to the use of the Matlab Script node, I don't know if this would work because this node calls into orders Active X of Matlab, which I'm not too familiar with. The Matlab script node does not have an engine that runs in the background, it is actually calls to Matlab and the user must have Matlab installed on their computers to use the Matlab Script node.

  From what we have discussed, I would like to use the MathScript node for your application so that your end user must only installed LabVIEW runtime engine to run an executable file.

• Problem with ode45 in Mathscript

  Hello

  I have a model no length (aircraft) in matlab code ".m" and I want to use in labview. I want to see the response of this model and for that I use the Mathscript ode_rk45 command. In Matlab, it works perfectly but in Labview, it takes a long time and at the end he gives you nothing. The model has 2 inputs and 20 outputs so maybe it's very big for mathscript. No idea how I can solve it? Can someone help me? I would appreciate a response. Thank you very much.

  Hi Cris_Ibi_1989,

  I would have thought, given the number of steps and ongoing iterations.  You take 100 steps, based on the size of your stage of 1/10.  The ode_rk45 performs a fourth digital method of Runge-Kutta of order on the equation, which means that each of these steps must be at least four iterations.

  I've seen indications on The Mathworks site that the service can be slow, but it may be down to how function parameters are specified and called by the function itself.

  Let me know if it helps.

  Kind regards

• mathscript node can work on arrays?

  on the help page Labview titled "Setting up the data type of the script node terminals", there is a line that says "because the MathScript node behaves differently that other nodes in script, you cannot change the data type of input terminals. Instead, if wire you a data type not supported for input on a node MathScript, LabVIEW converts the data type to a supported type or displays a cut wire. If LabVIEW converts the data type, a point constraint appears on the terminal where takes place the conversion. After that wire you an entry to a MathScript node, right-click the input terminal and select Show data of Type from the context menu to see the data type of the entry. »

  I don't understand this.

  I want to do math on arrays / vectors using mathscript. This means that I need input terminals in order to have a table data type.

  Say for example I have A [1 2 3 4 5] = (perhaps from a table of average data for 5 different channels) and say that I want to B = a ^ 2 (using the matlab syntax) - I can do this with a mathscript node?

  If this isn't the case, means that I can't do any math vector/matrix using the mathscript node? given that the whole point of matlab is to work on vectors and matrices, if mathscript node cannot do what it would also be a severe limitation.

  Dave

  Yes, you can use arrays in a MathScript node. Just create an entry on the node, give it a name and a value of table of wire to this entry.

• You place your order on the Apple Site

  I ordered a 7 IPhone September 21, as it was very
  hard to get one at the store here in Rome, Italy
  at that time. Today, 7 October, I see that the IPhone is available to any
  store, but I have still not received my... and shipping follow-up shows that
  the phone is always located in Amsterdam, Holland. This means that it will be
  probably need another 7 days to be delivered to me! Now, I want to only disclose my
  concern that I think that what makes an online prescription should be advantaged
  otherwise it's not really a reason to buy
  an article on the Web Site!

  And this is the last time I'll do so!

  Thank you!

  Greetings from Rome

  !

  Don't know what your question on the iTunes Store, but you already know that you talk only to other users on these forums and that Apple are not here - if you want to contact Apple using the 'contact us' link at the bottom right of each page here.

• Change order number/special character artists

  I would like to know if there is a way to change the order of all the artists that begin with a number or a special character order. Currently, they are all sitting at the bottom of the list of the artist on the ipod (and iTunes) but I would like to have all displays at the top of this list.

  This is the sort order...  I think you would need to change the names of the artists so that they start with something that gets sorted at the top of the list in alphanumeric order.  For example, replace 10,000 Maniacs a_10, 000 Maniacs.

• My photos and videos are not in chronological order, when I export the Photos app

  Hello. When I export my photos and videos from the Photos app on my iMac all the photos and videos are not in order. I need all the photos in good standing - I need to export about 5 000 pictures of the application in order for a meeting next week! Help, please!

  Ethan.

  This is not photo - it is a function of the viewing program (probably the finder) - once the photos are exprted form pictures you can see then in different ways which you control, Photos does not - by the finder you can view by name of son, byt several dates, by file size, etc.

  Usually, the best way to accomplish what you want is to export using the names of batch file numbeing and then sort by file name in the program viewing

  LN

• Impossible to place an order unlock iPhone 7 over 256 GB silver color online

  I can't unlock iPhone ordering 7 more than 256 GB silver color online. Also, I checked with my ISP (AT & T) in the store. Update received saying pre-paid AT & T customer can't place an order for me. And suggested I check in the Apple store. Please suggest me without contract, how to buy iphone 7 more

  Today, I visited the Apple store. Representative informed me that they cannot place an order for customer prepaid with any carrier (AT & T or T-mobile) even if you are willing to pay the total amount in advance.

• Order of the iPhone

  I go the iphone7 order + 19/9

  and he said: it will be delivery between 11/10-17/10

  but the State of the process is still in its housing on part of treatment about two weeks

  they will be actually delivered between the date or not?

  They should be.  Mine was stuck in the treatment of a week and a half, and shipping and final delivery arrived within 5 days after that State passed preparing to ship.

• Cannot change the order of songs in my playlists on my new iPhone 7 (iOS 10.02). How can I fix?

  CAN I change the order on my MacBook Air when my phone is connected (but the changes are not published on my phone)

  Hello, wolfebait!

  Welcome to congratulations on getting a new iPhone and Apple support communities 7.  I see your message that you are having problems changing the order of song into playlists that you created, but it only happens on your new iPhone.  I have several playlists I created myself, and I sometimes have to change the order of songs as well.  I'm happy to help you with this.
  

  1. Open your music app.
  2. Type library on the bottom left.
  3. Touch Playlists.
  4. Press the Playlist you want to change (it must be one that you have created, as organized playlists cannot be changed).
  5. Press 'Edit' at the top right of your screen.
  6. You should now see red circles 'remove' to the left of each song and three horizontal lines gray right of each song.
  7. Press the grey horizontal lines with your finger and drag the song to the position in the playlist that you want it to be in.
  8. When you have finished editing, type "Done" in the upper right corner.
  9. Your playlist should now be in the new order that you chose!

  Have a great rest of your week!