Follow the parameters of buffer on Aspire V5

Similar Questions

• I followed the instructions and can't do full screen to quit.

  I clicked on the button menu, then on the button fullscreen. He gave me a full screen. Then I clicked the menu button and clicked the button fullscreen. The top bar is returned to the normal size and then disappeared leaving me with a full screen. How to get back to normal?

  Hello

  The keyboard shortcut for the fullscreen is F11. If the key is stuck?

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Mac: Hold the option key during the startup of Firefox.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• My computer has stopped responding to the parameters in my power options tool.

  My computer has stopped responding to the parameters in my power options tool. "IE I settled on 'disable the monitor in 15 min', turn off hard drives in 20 minutes" and "mode standby in 25 minutes.  But it does not follow these parameters. He just continues to run.

  original title: Auto standby until the day before

  You can try to change the settings, see if they meet the new settings and then change back to your desired configuration.

  Please give some more information:

  brand and model of the pc

  current antivirus

  Operating system and service pack

  Also this system to be free of infections:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  After return with results and INFORMATION.

• Can not enter the parameters of the UEFI firmware

  I bought a new 660ti for my new computer

  http://www.Newegg.com/product/product.aspx?item=N82E16883256815

  When I put in and plugged the screen remained black as if one has not been connected with the 'PC' in the right corner of the screen. I took the 660ti and put in my 560ti who was from an old computer that I had before I bought 800-060 and it worked just like it did when I bought the new computer, no problem, no nothing.

  People have said on different forums on how if secure startup is enabled and not inherited boot it won't work, considered most successful. But as usual with HP computers I buy, there is always something wrong with the bios and I can't find a solution anywhere.

  When I fly over the right side of the screen, go to "settings - change the settings of pc - General - advanced startup - restart" and when I finally get to change the settings of the UEFI and restart again, it is just a pure black screen and nothing happens until I quit and restart it, followed by a beep code, 6 short on about 7 intervals however I could be wrong on how many times he made 6 beeps in a row. Then it starts up as usual.

  I really don't want to have to take it to staples or another computer repair place, or my card back to Amazon.

  (another thing to note).

  When I put the 660ti in my old computer, it doesn't have a picture, but it seemed that someone poured water everywhere inside the monitor or as a NES game that had not been blown before putting it in the console and the resolution was about 800 x 600 in the monitor. I tried to activate the onboard graphics on this subject and it bricked essentially because there is no display on it at all. but I'm not worried about it as I am my new computer.

  Thank you

  Here are the specifications of your desktop HP ENVY Phoenix 800 computer - 060 According to the specification, this model comes with Windows 8 and has a BIOS with "Secure Boot" enabled and disabled ' Legacy Support'. You change all the parameters "UEFI", simply to DISABLE "Secure Boot" and ACTIVATE the standby mode 'legacy' in the BIOS.

  Please see "the computer does not start after the installation of a video (Windows 8) card" for the reason why your computer is not working with your new graphics card. First, remove all graphics cards after-sales market and return the graphics card to origin plant or use the onboard integrated graphics card to get into the BIOS. Once in the BIOS, you can change the settings as needed. Now, reinstall your new graphics card (be sure to connect the auxiliary PCIe power connector) and restart your computer... problem solved.

  Please click the White Star of KUDOS to show your appreciation

• How to set the parameters of scanning on Officejet 6500 connected to a Mac?

  I'm trying to scan documents and pictures using the following:

  Scanner: HP Officejet 6500 E710n-z all-in-one
  Computer: Macbook Pro retina
  Operating system: OS X mount Lion
  Application: "HP Scan" (this application was provided by HP)

  Whenever I have analyze anything, it comes out in grayscale at 300 dpi resolution.  At least, this is what HP Scan tells me when I click on the "Info" button in the lower right.

  I would like to be able to scan things in color rather than just in grayscale, and I wish I could choose the resolutions other than 300PPI.  But I looked everywhere in the graphical interface of the HP scanning application, and I can't find anywhere to adjust these settings.

  Did anyone here know how to change these settings?

  Unfortunately, the link you provided is a version of the software much older than what I have currently installed.

  HP_Installer_Inkjet_Full_Group02_10.3.dmg was published on 14/09/2009, and it is intended for OS X 10.6, aka Snow Leopard.  When I installed the printer installation CD had software pretty much at this time, and he refused to install on MTN. Lion.  Instead it asked me to download the latest version from the HP website.  What is installed on my machine is a file named HP_Mountain_Lion_Ink_SW_v12.23.18.dmg.  Unfortunately, I neglected to save the URL I downloaded from, and I can't seem to find him.  But I saved a copy of the .dmg file in case I ever need to reinstall.

  Meanwhile, I managed to find the answers on my own.  Part of my problem is that, although I'm fairly familiar with Linux and Windows, I am new to the GUI of Mac and his metaphor interface and GUI desktop is different, enough of these I'm familiar with what my instincts are sometimes not a lot of help.  Then, it took me days to notice the only critical button that made all the selections, I was looking for visible.

  HP Scan DO allows you to set things like the Type of Scan (photo or Document), Mode (color, grayscale, black & white), resolution and a number of other parameters.  But we must first click on the "Scan" button... ", and then click on the widget of the arrow to the right of the selection of the Scanner.  By clicking on the arrow pointing downwards in fact all other settings appear.

  If you change the Type of Scan of photo of the Document, it automatically changes color in grayscale Mode, which does not want to create a color PDF.  But you can change the Mode back to color.  And you can save this document as a PDF searchable to call the I.R.I.S. OCR software on it.

  To create a multiple page PDF, or let the software analyzes all sheets in the document feeder, or place another page on the window and click on the button 'Add' in the lower left corner of the window, how it displays the same dialog box that is displayed when you click 'Scan '. ».  You can click on the arrow down and change the settings for each page or leave them alone and they will remain the same as the parameters of the previous page.

  When you have analysed all the pages that you want in a single document, click 'send '.  This displays the usual selection of files box.  At this point, if you set the 'Searchable PDF', or 'PDF' format a checkbox will appear marked "save all items in a single file.

  Thus, it seems that HP Scan works with MTN. Lion, it provides all the features that Capture of Image and seen I.R.I.S. integrated in it, it provides OCR features that Capture of Image is not.

• Modify the parameters in an expression in After Effects

  Hello!

  I changed the first parameter in this expression with-10:
  

  How can I change the following two parameters?

  thisComp.layer("Bakgrunn_med_hull").transform.scale - 10, -15, -20

  Concerning
  WIDAR

  You can also subtract the vectors of equal size with the help of a mathematical notation more traditional:

  thisComp.layer("Bakgrunn med hull").transform.scale - [10, 15, 20]
  

• List of values of the parameters Sys_Context

  I have a package which is store values in a context of system so they can be shared by all sessions without the overhead constantly querying a table. My question is, after I have a number of pairs name / value of the context, is there a way I can get a list of the parameter set following context he names?
  
  All the examples I found in the docs use USERENV as the context and extract the values using the list of names known. I need a way to get all the parameters without necessarily knowing the name beforehand.
  
  Thank you

  >
  I have a package which is store values in a context of system so they can be shared by all sessions without the overhead constantly querying a table. My question is, after I have a number of pairs name / value of the context, is there a way I can get a list of the parameter set following context he names?

  All the examples I found in the docs use USERENV as the context and extract the values using the list of names known. I need a way to get all the parameters without necessarily knowing the name beforehand.
  >
  Use the view system "global_context".

  select * from global_context;
  
  select * from v$globalcontext;
  

• Cannot open disk ' * hard ' or one of the snapshot disks it depends on. Reason: One of the parameters is not valid.

  I have 4 virtual servers running on a host ESX 4. 3. run OK but 1 gives the following error when you choose works in Vsphere client.

  Cannot open disk ' * hard ' or one of the snapshot disks it depends on. Reason: One of the parameters is not valid.

  I have attached the log file and the list of files in the folder of servers.

  Any help much appreciated.

  Welcome to the community,

  This virtual machine successfully powered on since July 23?

  To me, it seems that something went wrong with the clichés (I guess they are / were created by a backup application). Due to the size of the files I guess more that snapshots were created and not modified.

  If this is the case, you can delete the virtual machine to inventory, edit the vmx file by

  replacement of

  scsi0:1.filename = LHMU-VIC04_1 - 000004.vmdk

  with

  scsi0:1.filename = LHMU - VIC04_1.vmdk

  then right-click on the vmx file in browser data store and add it to the inventory.

  Before adding it to the inventory, delete the snapshot vmdk files (those with '00000 x' in their file names) as well as the vmsd file. BTW, you can also remove the zdump file if you want.

  If you are not sure if snapshots contain valid data, take a look at the (small) header files vmdk. If the CID and the parentCID match, snapshots were created while the virtual machine has been powered down.

  If you are not sure, please post back before doing anything.

  André

• Order of the parameters

  I test the managed Beta driver and I ran across a few questions.
  
  In my current Sql files that use anonymous pl/sql blocks, I put the settings in order of type to make it easier to read, do not call order. When I use the managed driver and the settings are not in order of call I get an error like bad guy (PLS-00382) or my Ref_Cursor parameter is not a slider (PLS-00456) or creates a "network Session: end of file" error.
  
  Is there a plan to allow the parameters passed in any order instead of the call order?
  
  Example of
  Given the following parameters
  P0 Varchar (25) IN: = 100
  P1 OUT ref_Cursor
  P2 Varchar (25) IN: = 100
  P3 OUT ref_Cursor
  
  
  -"Œuvres".
  Begin
  : P2: = '112'.
  : P0: = '112'.
  OPEN: p1 for select: p0 FROM DUAL;
  
  OPEN: p3 for select: p0,: P2 FROM DUAL;
  END;
  ---------------------------------------------------------------------------------
  -"Network Session: end of file.
  Begin
  : P2: = '112'.
  : P0: = '112'.
  OPEN: p1 for select: p0 FROM DUAL;
  
  OPEN: p3 for select: p0,: P2 FROM DUAL;
  END;
  ---------------------------------------------------------------------------------
  / * Error
  ORA-06550: line 4, column 8:
  PLS-00456: item 'P1' is not a cursor
  ORA-06550: line 4, column 3:
  PL/SQL: SQL statement ignored
  ORA-06550: line 5, column 9:
  PLS-00382: expression is of the wrong type
  ORA-06550: line 5, column 2:
  PL/SQL: Statement ignored
  */
  
  Begin
  OPEN: p1 for select: p0 FROM DUAL;
  : P0: = '112'.
  : P2: = '112'.
  OPEN: p3 for select: p0,: P2 FROM DUAL;
  END;

  Try setting the BindByName = True on your OracleCommand object method. The default value is false, and that will create the behavior that you see here.

• Follow the progress of the request

  I ran an explain on a SQL and it indicates the cost of the query to be 20 k, but when I run the query it will running forever (I killed him after 30 minutes). I have an another SQL which cost shows up even 20 K and it ends with a 10secs.
  
  I ran a trace on it and sees it under its weight tons of IOs and there are several sequential db awaits.
  
  1. what could be the reason for the query1 to run for so long when the cost is not high.
  2. is it possible to identify what stage a query is running, I mean how to identify what stage of the explain command the query executes now? I want to know which part of the query is the database currently running.
  3. I do not see anything in v$ session_longops for this sql where to follow the progress of this race.
  4. is there a way or a tool that will give me the list of all the tables that use a particular query. There are some views used in queries, which in turn are based on other points of view. So I want to find the list of all tables for a given query, so that I can find if the stats are outdated for one of them who may cause the query to execute forever.
  
  Help, please...
  
  Thank you

  Hello

  If you're on 11g, use the SQL monitor, it will answer all your questions.

  If you're not, look at V$ SESSION_LONGOPS, if there is no current longops associated with this request, try to look carefully at the db file sequential reads - watch the parameters of this event and discover what index is playing. Then look at the stats index and table for this index see if they updated and representative and look at the query predicates and estimates of cardinality for this part of the request.

  Best regards
  Nikolai

• Active Services Web Directory has encountered an error when reading the parameters for the specified Active Directory Lightweight Directory Services instance

  VCenter Server 4.1, I installed it on a physical machine. This is the error message that appears whenever I try to follow what is happening every 1 min event viewer.

  Error:

  role for users: log name: Active Directory Web Services

  Source: ADWS

  Date: 2010-07-28 15:55:21

  Event ID: 1209

  Task category: Instance ADWS events

  Level: WARNING

  Keywords: Classic

  User: n/a

  Computer: wwubmw.williamwoods.local

  Description:

  Services Web Active Directory encountered an error when reading the parameters for the specified Active Directory Lightweight Directory Services instance.  Services Web Active Directory will try again this operation regularly.  At the same time, this body will be ignored.

  Instance name: ADAM_VMwareVCMSDS

  The event XML:

  The OS is Windows 2008 R2. What should I do to solve the problem.

  Thanks for the reference Troy

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  Gregg Robertson, VCP3, 4, MCSE, MCSA, MCTS, MCITP

• Verification of the parameters of the kernel WARNING

  Hello
  
  I tried a fresh install of RHEL5 on box to virtual tools and install 10g r2
  
  When installing the 10 g r2 on RHEL5, checking all the requirements...
  Verification of the parameters of the kernel WARNING
  Checking of the files-max = 65536, found file - max = 50737
  Full version. The result of this review has no < < < <
  Problem: The kernel parameters do not meet the minimum requirements (see above)
  Check recommended glibc version
  Expected result: Atleast = 2.3.2 - 95.27
  Result real 2: 5-12
  
  Possible problem: it could be the problem
  During the installation of the packages on the cd 1 (I tried different CDs), I wasn't able to install the rpm package third CD 1, the following...
  rpm - Uvh glibc-2. *
  
  However, I am able to install the 0racle 10g without problem as I said...
  
  How can I install the rpm file and set the kernel parameter, if it is...
  Someone know the solution...
  
  Published by: AAP 28 February 2012 10:53

  Yum is certainly the way to go because it solves software dependencies, this isn't the RPM. The problem with RHEL is that it does not provide a public yum repository and you will pay a subscription. CentOS and Oracle Linux are not.

• missing namespace for the parameters in the web service call

  We try to call a web service developed by Java & XFire. The WSDL is valid for WS - I Basic Profile and it works very well with SoapUI. The query generated automatically by SoapUI is the following:
  
  "" "" "< soapenv:Envelope xmlns:soapenv = ' http://schemas.xmlsoap.org/soap/envelope/ ' xmlns: your =" http://www.example.org/test8/ " xmlns:tes1 =" http://www.example.org/test8 "> "
  < soapenv:Header / >
  < soapenv:Body >
  < your: parameters >
  < a >
  < tes1:id > 44444444444445 < / tes1:id >
  < tes1:b >
  < tes1:id >? < / tes1:id >
  < / tes1:b >
  < /a >
  < id >? < /ID >
  < / your: parameters >
  < / soapenv:Body >
  < / soapenv:Envelope >
  
  When we put this in Flex, what we are seeing is that the namespace for the parameters element is missing. We see it in the proxy logs. The server receives this message and parameters is not in namespace, so the server complains that the parameters is missing. We can reproduce this exact behavior by removing namespace in the query with SoapUI.
  
  The question is why flex removes namespace for the element parameters?
  
  We use the literal to the WSDL document, and I paste below. We have been stuck on this for over a week, so if anyone has any suggestions I would be eternally grateful. Thank you
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < wsdl:definitions
  ' xmlns:SOAP =' http://schemas.xmlsoap.org/wsdl/soap/ "
  ' xmlns:TNS =' http://www.example.org/test8/ '
  ' xmlns:WSDL =' http://schemas.xmlsoap.org/wsdl/ '
  "container =" http://www.w3.org/2001/XMLSchema "
  name = "test8".
  targetNamespace =" http://www.example.org/test8/" > "
  WSDL: < types >
  < xsd: Schema
  "targetNamespace =" http://www.example.org/test8/ "
  xmlns:Q1 =" http://www.example.org/test8" > "
  < xsd: import
  schemaLocation = "Test8.xsd."
  namespace =" http://www.example.org/test8" > "
  < / xsd: import >
  
  < xsd: complexType name = "fooRequestType" >
  < xsd: SEQUENCE >
  < xsd: ELEMENT
  name = "a".
  Type = "Q1:A" >
  < / xsd: element >
  < xsd: ELEMENT
  name = "id".
  Type = "xsd: String" >
  < / xsd: element >
  < / xsd: SEQUENCE >
  < / xsd: complexType >
  < xsd: complexType name = "fooResponseType" >
  < xsd: SEQUENCE >
  < xsd: ELEMENT
  name = "b".
  Type = "Q1:B" >
  < / xsd: element >
  < xsd: ELEMENT
  name = "id".
  Type = "xsd: String" >
  < / xsd: element >
  < / xsd: SEQUENCE >
  < / xsd: complexType >
  < / xsd: Schema >
  < / wsdl: types >
  < name of the WSDL: message = "fooRequest" >
  < wsdl: part
  name = "parameters".
  Type = "tns:fooRequestType" / >
  < / wsdl: message >
  < name of the WSDL: message = "fooResponse" >
  < wsdl: part
  name = "parameters".
  Type = "tns:fooResponseType" / >
  < / wsdl: message >
  < name of wsdl: portType = "Test8" >
  < name of wsdl: Operation = "foo" >
  < message wsdl: Input = "tns:fooRequest" / >
  < message wsdl: output = "tns:fooResponse" / >
  < / wsdl: Operation >
  < / wsdl: portType >
  < wsdl: Binding
  name = "Test8SOAP".
  Type = "tns:Test8" >
  < soap binding:
  style = "document".
  "transport =" http://schemas.xmlsoap.org/soap/http " / >
  < name of wsdl: Operation = "foo" >
  WSDL: input >
  < use of soap: body = "literal" / >
  < / wsdl: Input >
  < wsdl: output >
  < use of soap: body = "literal" / >
  < / wsdl: output >
  < / wsdl: Operation >
  < / wsdl: Binding >
  < wsdl:service name = "Test8" >
  < wsdl: port
  Binding = "tns:Test8SOAP."
  name = "Test8SOAP" >
  "" < soap: address location = ' http://www.example.org/test8 ' / >
  < / wsdl: port >
  < / wsdl:service >
  < / wsdl:definitions >
  
  the XSD containing A and B:
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  "" "" "" < scheme xmlns = " http://www.w3.org/2001/XMLSchema" targetNamespace = ' http://www.example.org/test8 ' xmlns:tns = ' http://www.example.org/test8 ' elementFormDefault = "qualified" >
  
  < name complexType = 'A' >
  <>sequence
  < element
  name = "id".
  Type = "string" >
  < / item >
  < element
  name = "b".
  Type = "tns:B" >
  < / item >
  < / sequence >
  < / complexType >
  
  < complexType name = "B" >
  <>sequence
  < element
  name = "id".
  Type = "string" >
  < / item >
  < / sequence >
  < / complexType >
  < / schema >
  
  

  The solution seems to be that Flex doesn't support unwrapped no literal document. Flex only supports rpc literal or literal wrapped document. This seems to be because flex adds the name of the xml message method and in the unpacked literal document there is no message name in the soap message.

  It took a lot of time to understand this, partly because we did not know exactly what is wrapped meant (there is no option in Eclipse WTP for her, no way to verify no wrapped with a tool, etc.). If Flex said that she did not support unpacking literal document we would have saved ourselves a week or two.

• Apple Watch 2 will be able to follow the elevation/altitude

  I need to know if Apple Watch 2 will be able to follow the elevation / altitude without having my phone. IM wanting to buy a watch for Strava

  Hello

  Apple Watch series 2 does not include a barometer.

  Series 2 features include GPS built-in, waterproof to 50 m and a dual-core processor.

  More information:

  http://www.Apple.com/watch/

• Add DNS - network settings, the parameters of the airport or both?

  I didn't know there are 2 places for that - and I'm not sure that works best.

  Recently added 6.6.6.6 and 8.8.8.8 to try to speed up Web sites that have been loading slowly, as suggested these tips very. I have added in the network settings, but then recently realized that my extreme settings of the airport have a place for dns as well.

  I do not understand the difference.

  Your Mac setting only controls your Mac.

  The parameter to your Airport Extreme allows to set any device on your network.

  If you have only one device, there is no difference.

  But suppose that your family has 9 network devices: two Mac, a PC, a smart TV connected to Netflix, four smartphones for parents and children and an iPad. If you enter the DNS settings on your Mac, this is the only device that will use the DNS settings. But if you enter the DNS of your network (Airport Extreme) router settings, which becomes the default DNS for any device on the network that does not have its own DNS settings entered. You have only to change DNS setting once, not 9 times for all these devices.

  For all my devices that stay at home, I get the DNS on the router addresses, and the devices are all set to look at the IP address of the router to get the DNS so that all devices follow the DNS from the router configuration. For all devices that leave the House, I get the DNS preferred settings on those so that they will continue to look at my favorite, DNS settings even when they are connected to the network of another.