OS 10.7 not scan will print

Similar Questions

• To print from the computer, but can not scan from printer to computer. Tried everything. Disconnected power supply, etc, nothing works.

  Have no problem when you print a document from the computer. Can not scan from printer to computer. I don't know that I've scanned because I went from windows 7 to 10. Printer not repeat myself found computer.

  Hi, Rolland,.

  Welcome to the Microsoft community. I might help you.

  To better understand the issue, I would need more information on your side.

  1. What is the brand and model of the scanner?

  2. Do you get any error messages? If Yes, what is the full error message?

  This problem might have occurred because of these reasons:

  1. Corrupted driver.

  2. Hardware problem.

  Method 1:
  I suggest you to run hardware store and check if it helps.

  (a) press the Windows keyboard.

  (b) Troubleshooting type in the search box and press enter.
  (c) click on material and audio.

  (d) click on hardware and devices and follow the on-screen instructions.

  Method 2:
  If the problem persists, I suggest you to download and install the latest scanner driver\software on the manufacturer's Web site.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you more.

• Dell photo 966 printer not scanning or printing on Windows 8.

  My dell photo 966 printer was analysis no matter what since it installed on my new windows 8 PC. He scanned and printed fine on my old Windows XP PC.

  The printer prints only half of the image I want to print also.

  Thank you

  Moya

  Hi Moya,

  This problem may occur if the printer driver is not compatible with the computer of Windows 8. See the Compatibility Center for more information.

  To use Dell 966 all in one Photo printer on Windows 8, you need to install the Windows 7 drivers in compatibility mode.

  1. Download Windows 7 drivers from the link: http://www.dell.com/support/drivers/us/en/19/product/dell-966
  2. Install the drivers in compatibility mode, see this link: http://windows.microsoft.com/en-ca/windows-8/older-programs-compatible-version-windows

  You can also check the online Help article: http://windows.microsoft.com/en-CA/windows/printer-problems-in-windows-help#fix-printer-problems=windows-8&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I have a Photosmart 6510 which prints OK but will not scan. Printer msg = "none found computer."

  I have a HP Pavilion a730n with you-verse connected Windows XP.  I know the SSID name and it is displayed in the Wireless Setup Wizard but never received the installation of u-Verse password I tried like 6 different passwords without a bit of luck.  I do not have the Scan to manage many one able to complete the installation process until I have install the wireless part.  What is my next step. Help!

  Hello foxsweets

  I don't think that the printer can work properly by plugging into the router with USB. I noticed that you said that you don't have the password wireless for your network. The article below will help you find it.

  How to find the password WEP or WPA key for your network

  Install the software of the product for a wireless network connection

• Wireless scan not working do not, but will print officejet 4500

  I have a Dell with Windows 8.1, HP officejet 4500 Wireless.  Work to find two days ago, but now my "HP Solutions Center 's" software does not see the scanner.  \

  The Solutions Center softwared (that comes with the printer controll scanning photos and documents) is back with a message: The HP Imaging device was not found.  Try the following steps that... None of them worked.

  See my PC to the printer, and I can print to the printer, but CAN'T SCAN.    Help me please.
  [email edited by Moderator]

  Hello @chuckg7kc , welcome to the forums

  I've read about the software problem that you encounter on your system Windows 8.1, as printing software does not work for you, and you see the error "the HP Imaging device cannot be found". I have some ideas in mind which may help you!

  Perform an uninstall of level 3:

  If the software has been downloaded and extracted to your system:

  1. press Windows key + R and type %temp% enforcement and press enter

  2. Locate and open the folder starting with 7z (example: 7zS2356) (if there is more than one, choose the most recent folder)

  3 open the Util folder

  4 open the CCC folder

  5. run the L3uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9. try a clean boot that turns off all startup programs. Disable all firewall and anti-virus too and try the installation again.

  10 download the drivers and full software features: here

  11. once the printer is installed, go back to the clean boot instructions to re-enable the startup programs.

  Good luck

• Photosmart 7510 will not scan. Print, fax, Eprint, everything works, but not software for scanning

  I spent over 10 hours on the phone with Technical Support, Cloud Computing service and an escalation of HP handler.  The escalation of HP Manager ran a cleaner tool to remove completely all HP printer software and reinstalled.  Now, everything works except for analysis.

  Using the utility to scan the PC gives HP, "the series of HP Photosmart 7510 was not found"

  Using Scan of the computer for the printer display gives, "make sure that the HP printer software is installed.  I can, however, scan-to-one chip memory inserted in the computer, but is produces a jpg file and I need PDF.  All scanning software worked before technical support and escalation of HP is involved.

  Hi Bob,

  I discovered that Windows has made a number of updates to security on my computer.  Therefore, windows do not see the 7510 as a device scan and judged that he was a suspect and deactivated engine part analysis of the HP software.

  Reinstall the printer as a wireless printer, and then by reactivating the printer to scan, my HP software came back and now everything works as advertised.

  I think you were on the right track.  Then analysis stops on an HP printer without apparent reason, check if there's any recent Windows updates.  If so, reinstall the printer as a new wireless printer.

  Thanks for your comments!

• HP Office Jet 6600: HP Office Jet will not scan or print

  Whenever I try to copy or scan I get an error message "Unable to scan, copy or send a fax."  I tried all the solutions, and none of them works.  I have spent a whole day on this problem and still have no solution.  It prints very well.

  I used the Solution Finder & update from HP - HP Officejet full feature software and driver: recommended.  It worked!  I now can I print, copy and scan.  Thanks HP!

• Software HP said no 'connected', but Dr. scan will print and scan

  I have a Photosmart 2575 all-in-one, Windows 8.1

  I can print from the computer, but when I open the HP Solution Center, he says no 'connected' so I can't scan, make copys the computer etc.  the computer came with win 8 and solution centre worked.  I made the mistake of "redevelopment" earning 8.1 and this question and many others have started.  Not 100% sure that it is exactly when he started as I had no chance to use the center of HP solutions for some time and memory fails me if I used it since I installed Win 8.1 or not.

  I reinstalled the drivers HP and the software and run the HP doctor software.  Software Dr. actually says, all right, I can do the test scan successfully to its conclusion, but still can not sweep the HP Solution Center etc.

  Any help will be appreciated

  Hi garysprigg,

  Thanks for getting back to me. Please complete the solutions proposed in the following document; During the Installation printer point 8.1 of Windows, a Message "System cannot find the specified file" is displayed on the computer.

  Please let me know how it works. Thank you.

• Can not scan from printer

  I'm trying to scan documents for my Photosmart C410A printer for my computer. When I hit ok, I get the message "try to start the computer can." Should what program I use? I tried the HP Solution Center, but he says he can't work because the installation was not completed. Whwn I run the Setup, I get the installation complete message. How do the scan to run automatically from the computer?

  If you get the message "No Installation", then we will first try to uninstall and reinstall the printer to get this support issue. Here are my instructions on how to do it:

  First of all, if you use a USB cable, be sure to remove it. Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  The START menu type "%temp%" and press on ENTER. Here, I want you to press Ctrl+A and press on REMOVE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  Follow this link to download full feature software and drivers of the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4059652

  Install and let me know the result!

  As a side note, you should be able to continue to use the Windows Fax and application of scanning or MS Paint and use your scanner to import images from your scanner directly to either of these applications.

  Have a great day!
  

• HP Photosmart C6380 does not scan or print photo with Windows 8

  Just bought HP M6/1125DX/15j with Windows 8. My current HP printer is a HP Photosmart C6380 All In One.  The printer does not work, but the photo and analysis part icons no longer appear which were on my front desk. I tried to download the entire program which said would update my printer, but after 6 tries to one hour each, at the end he just said my download has been cancelled. Is there a chance that my printer will be supported by Windows 8 and how do I do that if I can't download.  Or am I stuck buying a new printer? Thank you

  Hello

  The C6380 is supported in Windows 8 and has a Solution Full Download.  I would try using the Print Wizard to download and install the drivers.

  Try this link for the Print Wizard.

  Print the installation wizard

• can not scan from printer to computer Windows 8.1

  scan from the printer to the computer not windows 8.1

  Hi @skinz

  Thank you for letting me know what HP printer you have.  I'll guess that you receive an error message about a connection error when scanning.

  I've included the document a "Computer no. has detected" or "connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711) .  Please click on your operating system and follow the troubleshooting steps.

  Please let me know the results.

• What is an error of memory power 10.1000? How can I solve this problem? My printer not scan or print.

  My Laser Jet M1212nf MFP has always copied, but it is not working everytime I try to print or scan a document and it shows a memory error and power on the screen. I've tried switchof and unplug the printer, but the persits still problem. Can someone help me?

  Just this fixed on an another 2600dn Laserjet...

  Remove the affected cartridge. Look at where the chip on the cartridge hits drive at the rear of the machine. There are two triangular 'son' which hit the chip.

  They must both be triggered proud of their horses. In all cases of this error that I have dealt with (I'm a reseller) an or both were pushed into the mountain and are unable to flow when the cartridge is removed.

  This prevents the song currently playing.

  The solution? Take them and gently pull the proud once again so that the inserted cartrdige is firmly in contact with them.

  Problem solved! I hope this helps some people encounter this problem.

• Can not scan email printer

  I tried all day to analyze an important e-mail document. I have a Brother MFCJ265W scanner/printer model

  and trying to send an e-mail to a Dell, windows operating system 7. Any help would be appreciated. The value default e-

  mail is windows live (I think) but I do not now how to set up an email account for windows live. Any help would be appreciated. I have an e-mail to file, but then were unable to find the file. Help, please

  Hi Kathleen,.

  Who is your provider of mail service?

  Please see the steps in the following links:

  Fax or email a document scanned

  http://Windows.Microsoft.com/en-CA/Windows/fax-email-scanned-document#1TC=Windows-7

  Scanning: Frequently asked questions

  http://Windows.Microsoft.com/en-CA/Windows/scanning-FAQ#1TC=Windows-7

  Please answer us on the State of the question to help you further.

• C4280: I can print but not scan - on Mac with HP printer

  Hello. I can print and copy but will not scan. It is five years old, the printer does not see a lot of action and is in good shape, so it would be a shame to get rid of if I can work on what is the problem. Any kind folk know where I should start? Thank you! Eugene

  Hi @walthamstoweuge,

  Welcome to the HP Forums!

  I see that you can print but not scan with printer HP Photosmart c4280 on Mac OS X 10.10 Yosemite. I'm happy to help you!

  Please make sure you have the latest driver installed, in this guide, installation of a printer Mac driver by using Apple Software Update. Then take a look at this post, Re: iMac OS X 10.9.3 scan driver for HP OfficeJet Pro 8500 a A910a to iMac doesn't seem to be, by my colleague @Sunshyn2005. That applies to your situation as well.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this helps!

• MP480 printer does not - scan using windows desktop PC 7

  I had this all-in-one Canon MP480 printer for about 3 years and have never had a problem with it.  I recently got a new computer and since then, it will print, but he refuses to scan.  Guard saying 'Préparation' for 30 seconds, then stops.  Why print would work but not the scan function?  Makes no sense.

  The first thing I tried was reset by disconnecting the two plugs of the printer for a few minutes, plugged them back in and turned on.  Still wouldn't scan.

  Then I uninstalled the driver and reinstalled.  Same thing.  Will not scan but print.

  Help!  It is driving me crazy and keeps me from stuff I need to do!   Thank you, if you want.  :-)

  -Diane

  No matter what site or I installed from CD? A driver is not a driver?
  Well Yes, it is important.

  If the Canon installation cd contains software drivers for win7 you should use.

  If not, you need to install software drivers diirect the Canon site, specific to your version of win7 (32-bit or 64-bit) bit

  Link for these has been published in the first response.

  Generally, you install the software and drivers before connecting the printer, the installation will tell you when to connect.